MUNICIPAL USERS AND SERVICE PROVIDERS
No compromises Holder makes the difference: Robust and reliable Minimal downtime High resale value Four seasons, one Holder 3 attachment points for maximum versatility Efficiency due to year-round operation Extreme manoeuvrability Articulated steering offers minimal turning radius Narrow track for operating on sidewalks Driving and operating comfort Smart and ergonomic operation and control design Roadspeeds of up to 24.9 mph (40 km/h) without effort The Holder system guarantees Maximum economic efficiency Holder makes the difference quality, versatility, manoeuvrability, comfort: Many words to describe what we just call the Holder system. A system designed to ensure that our implement carriers not only do a better job, but also yield a higher economic benefit than other vehicles. Machines from the German town of Metzingen have gained many fans among municipal users and service providers, for one simple reason: at the end of the day, a Holder tractor has done more work than any other machine. 2 3
sweeping and cleaning Mowing and surface care Sweeper and Suction Combination Vacuum Sweeper Weed Removal Water Tank Mower and Suction Combination Mulching Mowing with Outrigger Large-Area Mower Wet Kit Sweeper Artificial Turf Cleaning High-Pressure Cleaning All Season Sweeper Flail Mower with Suction Cleaner Asphalt Heater Compact Area Mower Watering Holder system: Versatility Four seasons, one Holder Legendary versatility has made Holder implement carriers sought-after municipal vehicles solving many problems encountered during daily work. They are ready for operation 365 days per year and are optimally equipped for any job. And those doing the counting appreciate a price-to-performance ratio that is hard to beat. Multifunctionality at its best Three attachment positions, standardized three-point lifts and a highly efficient power gearbox make these vehicles truly universal. A satisfied equation: A versatile carrier for multiple attachments yielding solutions that satisfy the demanding user in all seasons. Winter service Special applications Snow Clearing Snow Blower Snow Sweeping Snow Loader Rail-Way Technology Airfield Use Military Use Leaf Blower Broadcast Spreader Sidewalk Sander Anti-Icing Trail Cleaning Cold Planner Fork-Lift Operation Impaired-Mobility Conversions Remote Control 4 5
Holder system: Vehicle principle Articulated-frame steering: U-turns made easy On conventional straight-frame tractors only the front wheels turn and hence run outside the track, requiring wider turns to ensure sufficient clearance for the rear wheels. Thanks to articulated-frame steering, the front and rear end of a Holder tractors are steered in precise coordination. Front and rear wheels always run in exactly the same track. Attachments can be repositioned even at standstill. Highly accurate manoeuvring is made easy. Drive system: Lever and pedal control The automotive drive system provides two driving modes: dynamic mode, for on-road operation and constant mode, for work operation. In dynamic mode, just press the accelerator to accelerate your Holder to maximum speed without any interruption of power. If needed, speed can be split by half and pulling power doubled with the electrically shifted low range. In constant mode, the vehicle operates at constant engine and Pto speed while road speed can be controlled independently. The SDS (Special Drive System) allows the Pto speed to be controlled by a throttle lever while controlling the driving speed with the accelerator pedal. Attachment coupling: Convenient and versatile The power lift is easily adjusted to various attachment categories. Lifting and lowering as well as lateral and transverse inclination are controlled from the driver seat. The double-acting hydraulic cylinders are designed to meet any requirement. Attachments can be replaced easily and safely by one person and without tools. The perfectly located and easily accessible hydraulic connections make attachment changes easy. 6 Good Job! The C Series has been specifically designed for municipal applications: Cabin at front, engine at rear. Ensures optimal visibility of front-mounted attachments. The space behind the cabin remains available as a third attachment space. The optimal weight distribution ensures that the centre of gravity remains in the centre of the vehicle. That makes for easy work! Two-mass concept: Keeping all wheels safely on the ground When driving over an obstacle, the two vehicle sections articulate. This patented articulated steering system divides the vehicle into two masses. Each mass, i.e. front and rear end, has its own traction system, its own centre of gravity, and the load is evenly distributed between front and rear. When driving off road, it is actually two vehicles moving independently. This dynamic movement is supported by the Holder wheel load compensation. This balance mechanism creates diagonal counter-forces to ensure that all four wheels remain firmly on the ground. 7
Holder system: standard benefits Holder system: Economic efficiency Single purpose vehicles Single-purpose Single purpose vehicles Total cost Single purpose vehicles vehicle: Surface care Single-purpose vehicle: Sweeping Maintenance Sweeping Total cost Total cost Single-purpose vehicle: Clearing Clearing Mowing Single-purpose vehicle: Mowing Procurement cost Multifunctional vehicle incl. attachments compared to single-purpose vehicles Service and maintenance Running operating costs Total cost Multifunctional vehicle incl. attachments compared to single-purpose vehicles Versatility Our implement-carriers are designed for professional year-round use under the hardest conditions. The versatile vehicles excel especially when tasks are demanding and terrain is difficult. Investment The investment in a multifunctional implement-carrier is much lower than that for several single-purpose vehicles covering the same range of applications. Purchasing a Holder is an economically sound decision. Articulated-frame steering Wheel load balance Ease of maintenance Operating cost Manoeuvrability, accurate tracking and minimal turning radius are unbeatable advantages of the articulated-frame steering invented by Holder. While driving or at standstill, the entire front end can be steered in a new direction when the steering is turned. Attachments and power flow are always in line with the steering angle. The sophisticated balance mechanism beneath the articulation point keeps the four wheels firmly on the ground under all driving and load conditions especially on steep or uneven ground, but also when driving over obstacles, the Holder has a clear advantage. Our engineers always have serviceability in mind when designing a vehicle. Daily service routines can be performed with attachments mounted, thus saving time and money. A Holder reduces your vehicle pool cost. One single implement-carrier is cheaper to maintain than a fleet of single-use machines, not to mention the space saved. permanent hydrostatic all-wheel-drive The permanent system drives both axles that are equipped with 100% differential locks. This ensures excellent pulling and pushing power even on difficult ground. Breaking from a track is not an issue - even in difficult terrain. Four wheels of equal size The uniform wheel size ensures optimal soil preservation and excellent traction through evenly distributed drive forces. In addition, rolling resistance is reduced by rear and front wheels running in the same tracks. Tire wear is also reduced significantly. Maintenance cost High quality pays: A long service life means significantly lower costs for repair and parts than other vehicles would require. Also downtimes are kept to a minimum. Resale value The extremely long service life makes a Holder a sough-after item on the used-vehicle market, even after many years. Accordingly, these machines are traded at higher prices than others. That s when quality pays. Further features Benefits Use Standardized attachment mounts and Ptos Attachment change without tools Optimal traction by attachment load relief Wide variety of tires for all applications Wax-coating corrosion protection is standard Maintenance and service-friendly design Electronic diagnostic functions 24-month warranty Universal interfaces 3 standardized attachment points All-season operation Short training periods thanks to logical arrangement of controls Low total cost Low capital commitment High utilisation rate No vehicle changes and no adjustment period 8 9
X 30 ONE TRACTOR: Multiple APPLICATIONS X¹ sweeping The Holder X 30 s enhanced designs of sweeping and suction systems are setting new benchmarks in efficiency and effectiveness. The 264 gal (1000 ltr) hopper capacity extends on-the-job endurance while the high-powered vacuum, coupled with independently-acting dual sweeper brushes ensures thorough debris collection. x² mowing Tool-free changeover to a rotary mower turns the X 30 into a highcapacity mowing and collecting system. The ultra-powerful vacuum fan with its short suction path but large 6.2 inches (15.7 cm) diameter suction hose means minimal grass debris left behind. In addition, the 4.7 inches (11.9 cm) auxiliary suction hose enables the operator manually to clear hard-to-reach spots that other machines miss. x³ watering The X 30 s low-profile design, with a built-in combined 118.8 gal (450 ltr) water tank provides unparalleled capability for watering, flushing and any high-pressure cleaning. With an intelligent waterfilling system and Holder s ingenious tank-in-tank design, the X 30 affords access to confined spaces such as parking arcades. ergonomics that really works featuring the x³ hopper This multi-capability system saves time and money when used vacuum sweeping, mowing, for debris collection, watering and flflushing. This ideal configuration of tractor and attachment has the largest hopper/tank capacity in its class, reducing discharge frequency. Furthermore, the rugged Holder design enables you to swap attachments easily, without any tools. Further benefits Up to 20 % more fuel efficient Intelligent Engine Power Control System 16 mph (27 km/h) maximum speed Holder quick-hitch A frame system at front The generously-proportioned cab, with its thoughtfully selected features sets new standards in comfort, ease of operation, speed of familiarization and on-the-job safety. It has exits on the left and right and sliding windows. The multi-function armrest is fully synchronized with the seat and, along with the large Holder joystick, allos for confident, one-handed control of the machine. Working hydraulics with an infinitely variable flow control 5.2 gal/min (0-20 ltr/min) Plug-in hydraulic couplings on sides at front and rear, non-dripping, ZiNi-plated 10 11
C 250 / C 270 Powerful. Compact. Ingenious. Multifunctional C-Series vehicles are multifunctional attachment carriers for all applications - municipal work, service operations and facility management. Their ingenious design makes them ideal for all-year usage. 3 standardized attachment points Universal attachment interfaces Maximum flexibility Economical The C-Series high versatility level provides maximum productivity with a reduced vehicle pool. The procurement cost of this multifunctional vehicle is significantly lower than that of other single-purpose vehicles covering the same range of applications. Long service life due to high quality Lower repair costs and shorter downtimes High resale value Powerful The C 270 / C 370 with 67 horsepower engine is the most powerful setup of its class. The enhanced wheel load compensation ensures additional stability and traction for optimal power during any operation. Permanent hydrostatic all-wheel drive Engine-driven mechanical front PTO Mechanical differential locks on both axles New generation of implement carriers with articulated-frame steering The new C-Series from Holder combines high performance with compact design. The completely re-designed implement carrier has all the familiar Holder advantages in an impressive combination of high transmission of power, a sidewalk-compatible vehicle width and ultimate working comfort. Further benefits Extremely manoeuvrable due to articulated-frame steering Suitable for extreme slopes All-season use 4 drive and work ranges with maximaum-load control practical The infinitely variable speed control up to 24.9 mph (40 km/h) allows our C-Series models to flow with traffic. High capacity 17.2 gal (65 ltr) fuel tank 43 inches (110 cm) wide design is ideal for sidewalks 78.7 inches (200 cm) high facilitates underground parking High-performance 90 amps alternator optimal for harsh winter conditions Higher surface performance due to increased payload Stainless-steel exhaust Air intake at roof top edge 12 13
C 350 / C 370 SOMetiMes IT TAKES TWO Comfortable Whether a one-seater or two-seater cabin, the working comfort of the C-Series is the same. The shock-mounted cabins offer excellent 360 visibility, plenty of interior space, and a high level of operating comfort. Spring-mounted axles and driver s seat Generous stowing capacity and large cabin door Ergonomic operational design and swivelling arm console Service-friendly The service points of the C-Series are easily accessible. The hydraulic fitting cabin allows daily service checks to be done with attachments mounted. Hydraulic- and fuel-tanks tilt without tools Service hatch allows for minor service work and emergencies Easy battery replacement Easy to use The C-Series makes work quicker and cleaner by eliminating time-consuming work. Due to the new three-dimensional front lift, optimal work results can be achieved on first approach. Front and rear lift force of 1100 dan (kg) Drawbar funnel, and height-adjustable in latching rail Damping of attachments during road operation Two engine power options The C 200 is available with two engine options. The C 250 / 350 with 50 HP is ideally suited for all applications where the compact design yields a distinct advantage. The C 270 / 370 with 67 HP is the right choice when maximum power and versatility are needed. Further benefits Sliding windows, pop-up roof 3 different cabin heights (one-seater cabin only) Heated windshield and mirrors (optional) Integrated air-conditioning Comprehensive corrosion protection Variable attachment pumps up to 21.1 gal (80 ltr) (optional) Environmentally-friendly engine (stage IIIa exhaust standard) High resale value 14 15
C 480 Vehicle for all seasons Comfortable cabin The large, ergonomic cabin is a comfortable place for all-day work, no matter what the season. Height-adjustable steering wheel, variable seat position, plenty of leg-room even for operators wearing boots ensure work days without fatigue. Clear view of attachments Integrated air-conditioning Multiple storage compartments Ergonomic equipment operation All functions can be precisely operated with the clearly arranged film keyboard and the freely programmable joystick. Multiple options provided by multifunction joystick Joystick can be programmed by operator Clear outline, multiple functions Maximum payload The long wheelbase of the Holder C 480 ensure a smooth ride and provides an optimally balanced weight distribution. Due to its articulated steering with a 45 angle, this all-round vehicle is the most manoeuvrable in its class. Short, adjustable attachment mount Three-dimensional front lift Heavy attachments can be fitted without counter-ballast The allrounder The Holder C 480 is the most universal implementcarrier of all municipal vehicles: small enough to reach any corner, powerful enough to climb any slope. Whether sweeping, mowing, suction extraction or clearing, the C 480 is the perfect vehicle for all seasons. Further benefits Most agile implement-carrier of its class Road speed infinitely variable up to 25 mph (40 km/h) 4 drive and work ranges with load-limit control 3 attachment points Powerful hydraulic system The advanced technology of this implement-carrier becomes obvious when using attachments that put high demands on the hydraulic system. Wide range of equipment Variable attachment pump up to 26.4 gal/min (0-100 ltr/m) Easily accessible plug-type couplings User-friendly arrangement of connections Front lift with hydraulic lateral and inclination control Service-friendly Attachment change without tools 16 17
C 992 / S 1090 The power pack HIGH-perforMance NARROW-track VEHICLE The Holder C 992 is the world s most powerful narrow-track vehicle. 92 HP turbo-diesel engine 2 Ptos for direct power gearbox Power hydraulics: 31.7 gal/min (120 ltr/min) Infinitely variable hydrostatic Dual Drive 48.8 (1.24 m) outer width Three-dimensional front lift The hydraulic lateral and transverse inclination control of the front lift makes work easier and more efficient. The lift is controlled from the driver seat and can be adjusted to any operating requirements. Lifting and lowering Lateral and transverse inclination Function allows additional steering of attachment Lifting capacity: 5952 lb (2700 kg) Two drive concepts in one The Dual Drive function changes over from hydrostatic to mechanical mode at speeds above 17.7 mph (26 km/h). This optimised drive system is available for the 18 mph (30 km/h) and 25 mph (40 km/h) version as an option. Optimised fuel efficiency Reduction of operating noise S 1090 Always on top 92 HP and 3.6 litre displacement: The Holder C 992 / S 1090 is a high-performance vehicle for highly demanding jobs under the roughest conditions. This machine ensures customer satisfaction as ease of use and high productivity go hand in hand. Due to its hydrostatic articulated steering, the C 992 / S 1090 combines maximum manoeuvrability with perfect tracking. Further benefits Road speed infinitely variable up to 25 mph (40 km/h) 4 drive and work ranges with limit-load control 3 full attachment points Electrohydraulic attachment relief for optimal traction The S 1090 is perfect for any two man job. Spacious 2-man cab that features an impressive full-quality second seat. The passenger is able to remain in the cabin when the vehicle is at work. The cab is mounted on silent blocks providing excellent all-round visibility and plenty of interior space. Sprung axles and sprung driver s seat Ergonomic operational design and swiveling arm console Comprehensive single-hand control via multifunction joystick High-capacity 22.7 gal (86 ltr) fuel tank for many operating hours without refuelling 18 19
Holder tractors New and Improved NEW FACILITY Holder Tractors Inc. is located in Embrun, Ontario, just east of Ottawa City. Our new building has premium facilities and space. With ample space for storage and a spacious showroom. The mechanics also have plenty of space in the shop. Parts Our extensive parts room has what you need in stock. With a completely new setup and clean storage, the efficiency of our parts being shipped out is a big step up. Training Holder Tractors Inc. has a great training program. For service, training we offer both a classroom setting and a hands on experience. Holder Tractors Inc. guaranteers the mechanics will leave satisfied and more knowledgeable about a Holder tractor. Showroom WelcoME Holder Tractors Inc. now has a spacious showroom which is very welcoming and enticing for walk-in customers. It also gives our sales staff the proper resources to show of Holder tractors. Holder Tractors Inc. is proud to introduce a new facility to better serve our loyal Holder customers. Fully equipped with a large parts room, cast mechanical shop and a beautiful showroom to better show off the unique Holder tractor. 20 21
Technical data (excerpt) C 992 Description Deutz 4-stoke turbo-diesel Deutz 4-stroke turbo diesel Deutz 4-stroke turbo diesel Displacement 69 in3 158 in3 158 in3 220 in3 220 in3 220 in3 Power Output 27 HP 50 HP / 67 HP 50 HP / 67 HP 77 HP 92 HP 92 HP Cylinders 3 4 4 4 4 4 Cooling Liquid Liquid Liquid Integrated oil/air Liquid Liquid Air Filter Dry Dry Dry Dry with warning signal Dry with warning signal Dry with warning signal Brand: Good Year Duratrac Fuel Tank Capacity 7 US gal (27 ltr) 17 US gal (65 ltr) 17 US gal (65 ltr) 15.8 US gal (60 ltr) 22.7 US gal (86 ltr) 22.7 US gal (86 ltr) Application: Year Round Gearbox Hydrostatic Drive Hydrostatic Drive Hydrostatic drive Hydrostatic drive with digital-electronic control Hydrostatic with digital-electronic control Additional: dual drive Hydrostatic with digital-electronic control Additional: dual drive Suitable Tractor: C 250 / 270 Drive 4 wheel drive Permanent, all-wheel drive Permanent, all-wheel drive Full time drive Full time drive Full time drive 100% lock of both axles Electro-hydraulic (mechanical) 100% lock of both axles Electro-hydraulic (mechanical) 100% lock of both axles Electro-hydraulic control 100% lock of both axles Electro-hydraulic control 100% lock of both axles Electro-hydraulic control 24 mph (40 km/h) 24 mph (40 km/h) 24 mph (40 km/h) 24 mph (40 km/h) 24 mph (40 km/h) Standard: 540 rpm front Additional: 1000 rpm front Additional: 540 rpm rear Standard: 540 rpm front Additional: 1000 rpm front Additional: 540 rpm rear Standard: 540 rpm front Additional: 1000 rpm front Additional: 540 rpm rear Standard: 540/1000 rpm front Additional: 1000 rpm rear Standard: 540/1000 rpm front Additional: 1000 rpm rear - Max. Speed 17 mph (27 km/h) - Brand: Michelin XMCL Application: Winter/Snow Removal Suitable Tractor: C 480 & C 992 Dimensions: 10.5 x 80 R 18 Dimensions: 31 x 10.50 R 15 LT Brand: Good Year - Silent Armour Application: Year Round Suitable Tractor: C 480 & C 992 Dimensions: 10.5 x 80 R 18 Brakes Mechanic Drum Brakes Hydrostatic on all 4 wheels Hydrostatic on all 4 wheels Hydraulic drum brakes (4) Hydraulic wet multi disc (4) Hydraulic wet multi disc (4) Steering Hydrostatic, load-sensing Hydrostatic, load-sensing Hydrostatic, load-sensing Hydrostatic, load-sensing Hydrostatic, load-sensing Hydrostatic, load-sensing Hydraulic System Circuit 1:9 gal/min (33 ltr) Circuit 2:15 gal/min (58.5 ltr) Standard: 0-6.6 gal/min (0-25 ltr/min) Additional: (40-60 ltr/min) tandem pump Additional: (0-80 ltr/min) high flow kit Standard: 0-6.6 gal/min (0-25 ltr/min) Additional: 10.6-16 gal (40-60 ltr/min) tandem pump Additional: 0-21 gal (0-81 ltr-min) high flow kit Flow divider circuit 0-7 gal/min (0-25 ltr/min) Standard: 0-6.6 gal/min (0-25 ltr/min) Additional: (0-80 ltr/min) tandem pump Additional: (0-120 ltr/min) high flow kit Standard: 0-6.6 gal/min (0-25 ltr/min) Additional: (0-80 ltr/min) tandem pump Additional: (0-120 ltr/min) high flow kit Hydraulic Oil Capacity 5 US gal (19 ltr) 9.2 US gal (35 ltr) 9.2 US gal (35 ltr) 11 US gal (42 ltr) 12 US gal (45 ltr) 12 US gal (45 ltr) 2400 lb (1134 kg) cat I 2400 lb (1134 kb) cat I 4400 lb (1996 kg) - cat II 3306 lb (1500 kg) - cat II 3306 lb (1500 kg) - cat II Lifting Capacity, Rear - Brand: Good Year Softrac Application: Turf Suitable Tractor: C 250 / 270, C 480 & C 992 Dimensions: 31 x 15.5 R 15 Lifting Capacity, Front 1102 lb (500 kg) 2400 lb (1134 kg) cat I 2400 lb (1134 kb) cat I 4400 lb (1996 kg) - cat II 5950 lb (2699 kg) - cat II 5950 lb (2699 kg) - cat II Brand: Carlisle TruPower Tare Weight 2205 lb (1000 kg) 3948-4837 lb (1791-2194 kg) 3948-4837 lb (1791-2194 kg) 4916-5269 lb (2230-2390 kg) 5816-6151 lb (2638-2790 kg) 5816-6151 lb (2638-2790 kg) Application: Slope Mowing Perm. Gross Weight 3924 lb (1780 kg) 7055 lb (3200 kg) 7055 lb (3200 kg) 8818 lb (4000 kg) 9921 lb (4500 kg) 9921 lb (4500 kg) Suitable Tractor: C 250 / 270, C 480 & C 992 Towing Capacity 1653 lb (750 kg) 3307 lb (1500 kg) 3307 lb (1500 kg) 1323 lb (600 kg) 1764 lb (800 kg) 1764 lb (800 kg) Dimensions: 31 x 15.5-50 Wheelbase 51 in (129.5 cm) 67 in (170 cm) 69 in (175 cm) 79 in (200 cm) 72 in (183 cm) 72 in (183 cm) Total Lenght 106 in (269 cm) 144 in (365 cm) 160 in (407 cm) 164 in (415 cm) 162 in (411 cm) 167 in (424 cm) Total Height 78 in (198 cm) 79-90 in (201-229 cm) 79-86 in (200-218 cm) 86-90 in (218-229 cm) 86-88 in (218-224 cm) 88-90 in (224-229 cm) Track 29 in (75 cm) 35-48 in (89-122 cm) 48 in (121 cm) 38-46 in (95.5-117 cm) 38-51 in (97-130 cm) 36-41 in (91-117 cm) Min. Outer Width 38 in (96.5 cm) 44 in (113 cm) 52 in (132 cm) 47 in (120 cm) 51 in (131 cm) 52 in (132 cm) 51.2 106.2 21.7 36.6 67 110.6 143.7 125.5 42.5 42 44.5-60.2 Suitable Tractor: C 250 / 270 20.4 42.5 78.9 47.4-63.4 C 992 85.9-87.9 Dimensions: 205/ 70 R 15 86.2-89.6 23.8 21.9 Application: Year Round 24.3 41.8 6.4-8.6 38.4 Brand:Bridgestone Blizzak C 480 C 250/270 78.1 RT HL 130 6.9-9.4 5.6 14.3 32.7 X30 9.8 51.2 39.4 51.5-64.5 48.1 121.7 71.9 163.6 141.3 22 Tire S 1090 350: Kubota 4-stroke diesel 370: Turbo charged 78.5-90 Drive C 480 C 250: Kubota 4-stroke diesel C 270: Turbo charged PTO Hydraulics C 350 / 370 (2 man cab) Perkins 4-stroke diesel Differential Lock Dimensions C 250 / 270 Engine 4.2-8.1 Engine X 30 tire treads 38.1 134.3 161.8 23
Holder Tractors Inc. 100 Bay Street Embrun, ON K0A 1W1 Canada Telephone: 1 613 443 3200 Fax: 1 613 443 9600 info @ holdertractors.ca www.holdertractors.ca Best advice, sales and service from your Holder partner: Language: English ID No. 2013002 Technical changes reserved.