The New Professional Tree service contractors, arborists and municipalities are cleaning up in a whole new way thanks to Wallenstein CR commercial-grade brush chippers. Wallenstein CR means powerful equipment that s ready for profitable, get-the-job-done, everyday use. Built from a long legacy of heavy-duty outdoor equipment, Wallenstein CR represents a new commitment to you, the professional. Reliable, efficient and easy-to-use commercial brush chippers are now available - Wallenstein CR. Welcome to the new professional.
Confidence is yours with the impressive 3-year warranty on the CR70. This is Wallenstein CR s pledge to give you equipment you can rely on daily. Designed and manufactured in Canada, Wallenstein CR equipment is built using the latest technologies that give you precision fit, quality parts and controlled assembly.
Dual Active Rollers Hydraulically powered top and bottom feed rollers grip and pull large and small brush directly into the chipper using an aggressive teeth pattern and spring-loaded downward pressure. 7 X 12 Opening The 7 x 12 slab style opening easily receives awkward branches and reduces the amount of trimming required before chipping. 7 12 Safety/Control Bar Safety is everyone s priority, including Wallenstein CR. The CR70 Brush Chipper is compliant with the latest and most stringent operator safety requirements. The redesigned feed control includes two stop positions, stopping the feed rollers when the panic bar is pushed in or pulled out.
Rapid Recovery Auto Reverse Fully programmable, IntelliFeed monitors the rotor s rpm, slowing the rollers speed as needed. IntelliFeed continues the chipping at a volume that best matches its rpm. If the CR70 s rpm reaches its minimum setting, Wallenstein s Rapid Recovery technology takes over, automatically reversing the log away from the rotor. Rapid Recovery eliminates friction against the rotor, allowing the rotor to increase rpm s faster. Easy Start Tension Relief For starting flat-faced logs, the CR70 Easy Start System delays spring-loaded tension allowing the top feed roller to climb over the log easier. Strong gripping pressure is never lost and is automatically applied during feeding. 28 Diameter 0.75 Thick 190 lbs 4 Segmented Knives 1375 RPM 360 Swivel Exit Chute Angled Rotor Ledger Adjustment Equipped with a locking handle, the exit chute points and shoots in any direction. Angling the log against the rotor requires less horsepower to chip, saving fuel. Keep your CR70 chipping precisely with the easy to adjust ledger knife.
Rotor Lockout Safety Lever For added safety, the lockout lever will not engage until the rotor comes to a complete stop. Banded V-Belts Transferring energy efficiently and reliably is a double banded V-belt & pulley system configured for high torque. Easily Accessible Rotor Hood Once the lockout lever is safely engaged, the rotor hood can be easily opened without the use of tools. Auto Engage Fluid Coupler Ideal for contractors and rental shops where heavy duty work and solid performance is required.
Kohler Engine The CR70 is powered by a Kohler CH980-999 CC (38 HP) gas powered engine. This v-twin cylinder, air cooled, horizontal shaft engine is built to last. Highway Tires ST205 75R14 Radials for smooth travel from site to site. Signal Lights Brake, turn signal and perimeter lights feature L.E.D. technology. Brighter and tougher, meets all road travel requirements. Torflex Suspension Electric Brakes Lockable Fuel / Storage Compartment Absorbs impact of bumps reducing wear on chassis. Eliminates extra brake load on vehicle. For added security, the fuel and hydraulic tank openings are concealed behind a lockable enclosure preventing theft or tampering. Also provides handy storage of tools and gloves.
7 CHIPPER Specifications Engine Drive System Chipper Housing Opening Capacity Kohler CH980-999 CC (38 HP) Rotor: One Double Banded Belt Auto Engage Fluid Coupling Feed Rollers: Hydraulic 7 x 12 Slab Style 18 cm x 28 cm 7 Dia. (Max. 10 Slab) 15 cm Dia. (Max. 28 cm Slab) Chipper Hopper Opening 25 x 35 63.5 cm x 89 cm Chipper Rotor Dimensions/Weight Rotor RPM @ Max Engine RPM 28 Dia x 0.75 Thick @ 190 lbs 71 cm x 2 cm @ 86 kg 1375 RPM (Rotor) @ 3600 RPM (Engine) Hydraulic Tank Fuel Tank Mounting System Dry Weight Dimensions (LxWxH) Tire Size 8 Gallons (US) 35 Litres 9 Gallons (US) 40 Litres CARB / EPA emissions compliant 2 Ball 5.87 cm Ball 2750 lbs Approx. 1248 kg Approx. 160 x 65.5 x 98.5 (Open) 138 x 65.5 x 98.5 (Closed) 406.5cm x 166.5cm x 250cm (Open) 350.5cm x 166.5cm x 250cm (Closed) ST205-75R14 Distance of Feed Roller to Ground (Safety Standard) 85-216 cm Options Engine Type: Gas Trailer Mount: 2-1/2 Pintle, 2-5/16 Ball 6.35 cm Pintle, 5.87 cm Ball Feed System Intellifeed - Electronic Monitoring & Feed Control Knife Type Hardened Tool Steel (Rockwell - HRC: 56-58) Number of Rotor Knives 4 Segmented Knives Rollers Dual Horizontal Hydraulic Motors Top & Bottom - 19.3 ci Discharge Hood Rotation 360 Degrees Discharge Hood Height 98.5 250 cm Feed Rate 0-118 FPM 0-36 MPM 1-800-914-1842 Email: sales@wallensteincr.com Manufactured by EMB MFG Inc. Tel: (519) 699-9283 Fax: (519) 699-4146 4144 Boomer Line, St. Clements, ON N0B 2M0 www.wallensteincr.com PART # Z96384 PRINTED IN CANADA EECI13457-S01-01 Products may not be exactly as shown. Always wear safety protection when operating. 2013 EMB MFG Inc.