Revised Published01/19 BH200 SERIES ROTARY CUTTER PARTS MANUAL SECTION 121 MODELS BH215, BH216, BH217 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment. Important Operating and Safety Instructions are found in the Mower Safety Video that can be instantly accessed on the internet at: www.algqr.com/bve
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty RegistrationForm in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on thewarranty Card and on the Warranty Form that you retain.
TABLE OF CONTENTS BH200 SERIES ROTARY CUTTERS BH215, BH216, BH217 DESCRIPTION...PAGE NUMBER Front Belting and Rear Band BH215, BH216, BH217 (ALL MODELS)...121-1-1 Front Chains and Rear Chains BH215, BH216, BH217 (ALL MODELS)...121-1-2, 121-1-3 BH215 Base Frame Assembly...121-1-4, 121-1-5 BH216 Base Frame Assembly...121-1-6, 121-1-7 BH217 Base Frame Assembly...121-1-8, 121-1-9 Gearbox Assembly BH215...121-2-1 Gearbox Assembly BH216...121-2-2 Gearbox Assembly BH217...121-2-3 Driveline Assembly Offset Shear Bolt BH215 and BH216...121-3-1 Driveline Assembly Slip Clutch BH215...121-3-2 Driveline Assembly Slip Clutch BH216...121-3-3 Driveline Assembly Slip Clutch BH215 and BH216...121-3-4 Driveline Assembly Slip Clutch BH217...121-3-5 Hitch Assembly BH215, BH216 and BH217...121-4-1 Tailwheel and Related Parts BH215 and BH216...121-5-1 Tailwheel and Related Parts BH217...121-5-2
FRONT BELTING and REAR BAND All Models BH215, BH216, BH217 r t y u u y t e r q w REF. PART DESCRIPTION QTY. NO. NO. REQ D. 1 50071065 Angle for BH215-5 Models 1 50070871 Angle for BH216-6 Models 1 50070974 Angle for BH217-7 Models 1 2 50071064 Belting BH215-5 Models 1 50070872 Belting BH216-6 Models 1 50070973 Belting BH217-7 Models 1 3 50070300 Rear Band BH215 1 50070318 Rear Band BH216 1 50070342 Rear Band BH217 1 4 44109BH Carriage Bolt 3/8 x 1 G5 ZP * 5 15915BH Flatwasher 3/8 ZP * 6 15812 Lockwasher 3/8 * 7 8151200 Hex Nut 3/8 CP * * As Required 121-1-1
FRONT CHAINS and REAR CHAINS All Models BH215, BH216, BH217 1) o i y 1! 1@ 1# 1$ 1$ 1# 1@ u i y t 1! r e w q 121-1-2
FRONT CHAINS and REAR CHAINS All Models BH215, BH216, BH217 REF. PART DESCRIPTION QTY. NO. NO. REQ D. 1 50074799SP Front Chain Assy. BH215 1 50074796SP Front Chain Assy. BH216 1 50073880SP Front Chain Assy. BH217 1 2 50017211 Chain, 6 Link * 3 Chain Bracket, Front 1 4 50070149 Retainer Rod, Front BH215 1 50070049 Retainer Rod, Front BH216 1 50070112 Retainer Rod, Front BH217 1 5 50070145 Rear Chain Assy. LH, BH215 1 50070045 Rear Chain Assy. LH, BH216 1 50070107 Rear Chain Assy. LH, BH217 1 6 50018912 Chain, 4 Link * 7 Rear Chain Bracket, LH 1 8 50073402 Retainer Rod, Rear, BH215 2 50073357 Retainer Rod, Rear, BH216 2 50074289 Retainer Rod, Rear, BH217 2 9 50070146 Rear Chain Assy. RH, BH215 1 50070046 Rear Chain Assy. RH, BH216 1 50070109 Rear Chain Assy. RH, BH217 1 10 Rear Chain Bracket, RH 1 11 44109BH Carriage Bolt 3/8 x 1 Gr.5 * 12 15915BH Flatwasher 3/8 * 13 15812 Lockwasher 3/8 * 14 8151200 Hex Nut 3/8 * *As Required 121-1-3
BASE FRAME ASSEMBLY MODEL BH215 ROTARY CUTTER December, 2018 w y t e r 3# 2# 2) 3$ 1$ 1( 2% 3@ 2* 2^ 2$ 2& q 2( 2^ 3! 2! 1# 1% 1^ 3) 2@ 1@ u 1) 1! i 1* 1& o 121-1-4
BASE FRAME ASSEMBLY MODEL BH215 ROTARY CUTTER December, 2018 REF. PART DESCRIPTION QTY. NO. NO. REQ D. 1 - Deck Weldment, BH Red (50080055-10) 1 - Deck Weldment, JD Green (50080055-16) 1 - Deck Weldment, Kub Orange (50080055-23) 1 - Deck Weldment, NH Blue (50080055-28) 1 2 00791028BH Gearbox Assembly 1 3 81592 Input Shield 1 4 20414 Locknut 5/16 ZP 4 5 15907BH Flatwasher 5/16 ZP 4 6 90560 HHCS M8 x 1.25 x 15 G8.8 w/patch 4 7 50072536 Pan Weldment 1 8 63607 Blade Bolt Kit 2 9 7919BH Blade Bolt 2 10 20322 Lockwasher 1-1/8 CP 2 11 252BH Jamnut 1-1/8 NF 2 12 7555BH Blade, 5 Uplift 2 13 44814BH Flatwasher 5/8 ZP 4 14 50035829 Owners Manual Tube 1 15 44262BH HHCS 5/8 x 2-1/2 G8 ZP 4 16 50073354 Back-up Plate, Gearbox 1 17 00754777 Castle Nut M24 x 2 1 18 00778246 Washer 1 19 2850005 Klik Pin 7/16 x 1-3/4 2 20 50080165 Hitch Pin 7/8 x 6 2 21 50080763 Bushing, Quick Hitch 2 22 50080370 Decal, BH - Reflect 2 23 50074259 Decal, Made in USA 1 24 D813 Decal, Danger Multilingual 1 25 D454 Decal, Warning Crush Hazard 1 26 D614 Decal, Danger Thrown Objects 2 27 D590 Decal, Lube 1 28 D551 Decal, Blade Rotation CCW 1 29 D559 Decal, Genuine BH Parts 1 30 D549 Decal, Danger, Operation 1 31 D547 Decal, Danger 1 32 D546 Decal, Danger Guard Missing 1 33 50031214 Red Reflector 2 34 50080367 Decal, Model, BH215 1 121-1-5
BASE FRAME ASSEMBLY MODEL BH216 ROTARY CUTTER December, 2018 w y t e r 3# 2# 2) 3$ 1$ 1( 2% 3@ 2* 2^ 2$ 2& q 2( 2^ 3! 2! 1# 1% 1^ 3) 2@ 1@ u 1) 1! i 1* 1& o 121-1-6
BASE FRAME ASSEMBLY MODEL BH216 ROTARY CUTTER December, 2018 REF. PART DESCRIPTION QTY. NO. NO. REQ D. 1 - Deck Weldment, BH Red (50080098-10) 1 - Deck Weldment, JD Green (50080098-16) 1 - Deck Weldment, Kub Orange (50080098-23) 1 - Deck Weldment, NH Blue (50080098-28) 1 2 00791027BH Gearbox Assembly 1 3 81592 Input Shield 1 4 20414 Locknut 5/16 ZP 4 5 15907BH Flatwasher 5/16 ZP 4 6 90560 HHCS M8 x 1.25 x 15 G8.8 w/patch 4 7 50072538 Pan Weldment 1 8 63607 Blade Bolt Kit 2 9 7919BH Blade Bolt 2 10 20322 Lockwasher 1-1/8 CP 2 11 252BH Jamnut 1-1/8 NF 2 12 7556BH Blade, 6 Uplift 2 13 44814BH Flatwasher 5/8 ZP 4 14 50035829 Owners Manual Tube 1 15 44262BH HHCS 5/8 x 2-1/2 G8 ZP 4 16 50073354 Back-up Plate, Gearbox 1 17 00754777 Castle Nut M24 x 2 1 18 00778246 Washer 1 19 2850005 Klik Pin 7/16 x 1-3/4 2 20 50080165 Hitch Pin 7/8 x 6 2 21 50080763 Bushing, Quick Hitch 2 22 50080370 Decal, BH - Reflect 2 23 50074259 Decal, Made in USA 1 24 D813 Decal, Danger Multilingual 1 25 D454 Decal, Warning Crush Hazard 1 26 D614 Decal, Danger Thrown Objects 2 27 D590 Decal, Lube 1 28 D551 Decal, Blade Rotation CCW 1 29 D559 Decal, Genuine BH Parts 1 30 D549 Decal, Danger, Operation 1 31 D547 Decal, Danger 1 32 D546 Decal, Danger Guard Missing 1 33 50031214 Red Reflector 2 34 50080368 Decal, Model, BH216 1 121-1-7
BASE FRAME ASSEMBLY MODEL BH217 ROTARY CUTTER December, 2018 w 1# 1@ e 1! 2& 2^ 2% q 1& 3! 2( 2* 3) 1$ 2$ 2) 1^ 3) 2* 2( 3! 1* 1( 2@ 2! 1^ 2# 1) t r 1% i o y u 121-1-8
December, 2018 BASE FRAME ASSEMBLY MODEL BH217 ROTARY CUTTER REF. PART DESCRIPTION QTY. NO. NO. REQ D. 1 - Deck Weldment, BH Red (50080142-10) 1 - Deck Weldment, JD Green (50080142-16) 1 - Deck Weldment, Kub Orange (50080142-23) 1 - Deck Weldment, NH Blue (50080142-28) 1 2 00791057BH Gearbox Assembly 1 3 81592 Input Shield 1 4 50072540 Pan Weldment 1 5 7557BH Blade, 7 Uplift 1 6 63607 Blade Bolt Kit 2 7 7919BH Blade Bolt 2 8 252BH Jamnut 1-1/8 NF 2 9 20322 Lockwasher 1-1/8 CP 2 10 1162424 HHCS 3/4 x 2-1/2 G5 ZP 6 11 20299 Locknut 3/4 GR 6 12 15907BH Flatwasher 5/16 ZP 4 13 90660 HHCS M8 x 1.25 x 15 G8.8 4 14 50035829 Owners Manual Tube 1 15 50080370 Decal, BH 2 16 D614 Decal, Danger Thrown Object 2 17 50074259 Decal, Made in USA 1 18 D813 Decal, Danger Multilingual 1 19 D590 Decal, Lube 1 20 D551 Decal, Blade Rotation 1 21 D559 Decal, Genuine BH Parts 1 22 D549 Decal, Operation 1 23 D547 Decal, Danger 1 24 D546 Decal, Danger Guard Missing 1 25 50031214 Red Reflector 2 26 50080369 Decal, Model BH217 1 27 D454 Decal, Warning Crush Hazard 1 28 91062 Spacer, Cat 2 2 29 91061 Spacer 2 30 2850005 Klik Pin.44 x 1.75 2 31 50080166 Hitch Pin 7/8 x 7 2 121-1-9
MODEL BH215 GEARBOX ASSEMBLY 540 RPM 27T 16T REF. PART NO. NO. DESCRIPTION QTY. 00791028BH Gearbox Assembly 1 1 - Housing,EZ40 Gearbox 1 2 00791030 Cap, EZ40 Gearbox 1 3 00791031 Shaft, Input EZ40 Gearbox 1 4 00754753 Seal, Oil 35x72x10 1 5 50074091 Sight Window 1 6 61364C8 Capscrew, M10-1.5x16Gr.8.8 4 7 00790985 Plug, Vent M16-1.5 1 8 00791032 Plug, Hex Socket Hd M6 1 9 00791033 Shaft, Output EZ40 Gearbox 1 10 00754777 Nut, Castle M24x2.0 1 11 00778246 Washer, Hardened M25x44x4 1 12 00791034 Shim Kit, Input EZ40 2 13 00791035 Shim Kit, Output EZ40 1 14 00791053 Gear Kit, (16T & 27T Gears) 1 15 71453 Bearing, Ball (35x72x17) 1 16 2716532 Snap Ring (72x75x2.5) 2 17 70797 Bearing, Roller (35x72x18.25) 1 18 00791054 Nut, Castle M20x1.5 1 19 71305 Bearing, Roller (30x72x20.75) 1 20 70795 Bearing, Roller (40x80x19.75) 1 21 00753224 Snap Ring 2 22 00754783 Seal, 40x80x12 1 23 00754773 Shield, Protective 1 24 70487 Cotter Pin M4x40 1 25 70497 Cotter Pin M5x50 1 26 4038609 Dipstick 1 27 00790983 Seal Washer 1 121-2-1
MODEL BH216 GEARBOX ASSEMBLY 540 RPM 22T 15T REF. PART NO. NO. DESCRIPTION QTY. 00791027BH Gearbox Assembly 1 1 Housing,EZ40 Gearbox 1 2 00791030 Cap, EZ40 Gearbox 1 3 00791031 Shaft, Input EZ40 Gearbox 1 4 00754753 Seal, Oil 35x72x10 1 5 50074091 Sight Window 1 6 61364C8 Capscrew, M10-1.5x16Gr.8.8 4 7 00790985 Plug, Vent M16-1.5 1 8 00791032 Plug, Hex Socket Hd M6 1 9 00791033 Shaft, Output EZ40 Gearbox 1 10 00754777 Nut, Castle M24x2.0 1 11 00778246 Washer, Hardened M25x44x4 1 12 00791034 Shim Kit, Input EZ40 2 13 00791035 Shim Kit, Output EZ40 1 14 00791049 Gear Kit, (15T & 22T Gears) 1 15 71453 Bearing, Ball (35x72x17) 1 16 2716532 Snap Ring (72x75x2.5) 2 17 70797 Bearing, Roller (35x72x18.25) 1 18 00791054 Nut, Castle M20x1.5 1 19 71305 Bearing, Roller (30x72x20.75) 1 20 70795 Bearing, Roller (40x80x19.75) 1 21 00753224 Snap Ring 2 22 00754783 Seal, 40x80x12 1 23 00754773 Shield, Protective 1 24 70487 Cotter Pin M4x40 1 25 70497 Cotter Pin M5x50 1 26 4038609 Dipstick 1 27 00790983 Seal Washer 1 121-2-2
MODEL BH217 GEARBOX ASSEMBLY 540 RPM 14T 17T REF. PART NO. NO. DESCRIPTION QTY. 00791057BH Gearbox Assembly 1 1 Housing,EZ80 Gearbox 1 2 00791063 Cap, EZ80 Gearbox 1 3 00791064 Shaft, Input EZ80 Gearbox 1 4 50068116 Seal, Oil 45x85x10 1 5 50074092 Sight Window 85mm 1 6 44390BH Capscrew, M10-1.5x20Gr.8.8 4 7 00791032 Plug, Hex Socket Hd M6 1 8 00791065 Shaft, Output EZ80 Gearbox 1 9 00755621 Nut, Castle M30x1.5 1 10 00791066 Shim Kit, Input EZ80 2 11 00791067 Shim Kit, Output EZ80 1 12 00791079 Gear Kit, (14T & 17T Gears) 1 13 70796 Bearing, Ball (45x85x20.75) 2 14 00755618 Snap Ring (85x88.5x3) 2 15 70800 Bearing, Roller (50x90x21.75) 2 16 00791083 Snap Ring (90x93.5x3) 2 17 2516460 Snap Ring (50x47x3) 1 18 00755632 Shim (45.3x65.3x2.5) 1 19 70499 Cotter Pin M5X63 1 20 00791085 Shield, Protective 1 21 00791084 Seal, Oil (60x90x10) 1 22 00790983 Washer, Seal M16 1 23 00790985 Plug, Vent M16-1.5 1 24 4038611 Dipstick 1 25 2716423 Cotter Pin M6x60 1 26 00791093 Nut, Castle M30-2.5 1 121-2-3
MODELS BH215 & BH216 DRIVELINE ASSEMBLY With OFFSET SHEAR BOLT 540 RPM DRIVESHAFT for Model BH215 with OFFSET SHEAR BOLT DRIVESHAFT for Model BH216 with OFFSET SHEAR BOLT REF. PART DESCRIPTION QTY. NO. NO. REQ D. 50053123SP Driveshaft Assy for BH215 1 1 76711 Complete Collar Yoke 1 2 64694 Cross Journal Set 2 3 99847 Complete Shear Bolt Yoke 1 4 50053143 Guard Retaining Collar, Outer 1 5 50056404 Bolt 6 6 50053144 Guard Retaining Collar, Inner 1 7 50053145 Complete Shield 1 8 50017480 Ball Collar Kit1-3/8 1 9 44275BH Capscrew M8 x 1.25 x 50 1 10 63946 Grease Fitting 1 11 44306BH Hex Nut M8 x 1.25 1 12 50053146 Half Female Shaft w/ Shield 1 13 - Half Male Shaft w/ Shield 1 14 78786 Danger Decal, Outer Tube 1 15 78608 Danger Decal, Outer Shield 6 16 76062 Push Pin Set 1 17 81976 Shear Bolt (Pkg.of 5) 1 REF. PART DESCRIPTION QTY. NO. NO. REQ D. 50053131SP Driveshaft Assy for BH216 1 1 76801 Complete Collar Yoke 1 2 64610 Cross Journal Set 2 3 76616 Complete Shear Bolt Yoke 1 4 50053169 Guard Retaining Collar, Outer 1 5 50056404 Bolt 6 6 50053240 Guard Retaining Collar, Inner 1 7 50053246 Complete Shield 1 8 50017480 Ball Collar Kit1-3/8 1 9 44525 Capscrew M10 x 1.5 x 55 Gr8.8 1 10 63946 Grease Fitting 1 11 44154 Hex Nut M10 x 1.5 1 12 ------------- Order Complete Driveshaft Assy. 1 13 ------------- Order Complete Driveshaft Assy. 1 14 78786 Danger Decal, Outer Tube 1 15 78608 Danger Decal, Outer Shield 1 16 76062 Push Pin Set 1 17 81976 Shear Bolt (Pkg.of 5) 1 121-3-1
November, 2018 MODEL BH215 50074076SP DRIVELINE ASSEMBLY With SLIP CLUTCH 540 RPM REF. PART NO. NO. DESCRIPTION QTY. 50074076SP Driveshaft Assembly 1 1 50074280 Yoke With Collar 1 2 50074281 Collar Kit 1 3 50074282 Cross Kit 2 4 50074283 Friction Clutch 1 5 50074284 Spring And Bolt Kit 1 6 76194 Clutch Pad 1 7 50074285 Clamp Pin For Hub 2 8 78786 Safety Decal Inner 1 9 78608 Safety Decal Outer 1 10 N/A Outer Shield Cone 1 11 50074286 Outer Shield Bearing 1 12 50074287 Inner Shield Bearing 1 13 N/A Inner Shield Cone 1 14 50074288 Shield Complete 1 15 50080819 Bush, Friction Clutch 1 121-3-2
November, 2018 MODEL BH216 50076083SP DRIVELINE ASSEMBLY With SLIP CLUTCH 540 RPM REF. PART NO. NO. DESCRIPTION QTY. 50076083SP Driveshaft Assembly 1 1 50074280 Yoke With Collar 1 2 50074281 Collar Kit 1 3 50074282 Cross Kit 2 4 50074283 Friction Clutch 1 5 50074284 Spring And Bolt Kit 1 6 76194 Clutch Pad 2 7 50074285 Clamp Pin For Hub 2 8 78786 Safety Decal Inner 1 9 78608 Safety Decal Outer 1 10 N/A Outer Shield Cone 1 11 50074286 Outer Shield Bearing 1 12 50074287 Inner Shield Bearing 1 13 N/A Inner Shield Cone 1 14 50075571 Shield Complete 1 15 50080819 Bush, Friction Clutch 1 121-3-3
December, 2018 MODELS BH215 & BH216 DRIVELINE ASSEMBLY With SLIP CLUTCH 540 RPM 3 17 9 10 11 12 14 13 12 15 16 8 20 19 18 7 50053125SP DRIVESHAFT for Model BH216 with Slip Clutch REF. NO. PART NO. DESCRIPTION QTY. 50053125SP Driveshaft Assy for BH216 1 1 76711 Complete Collar Yoke 1 2 64694 Cross Journal Set 2 3 76152 Complete Disc Clutch 1 4 50053143 Guard Retaining Collar, Outer 1 5 50056404 Bolt 6 6 50053144 Guard Retaining Collar, Inner 1 7 50053158 Complete Shield (50053125) 1 8 50017480 Ball Collar Kit 1-3/8 1 9 76080 Spring 8 10 76159 Flanged Yoke 1 11 76195 Bushing 1 12 76194 Lining Ring 2 13 76064 Tapered Pin Set 1-3/8 1 14 76161 Clutch Support 1 15 76196 Pressure Plate 1 16 44300 Capscrew M10 x 1.25 x 80 8 17 44298 Hex Nut M10 x 1.25 8 18 50053159 Half Female Shaft w/shield (50053125) 1 19 50053160 Half Male Shaft w/shield (50053125) 1 20 78786 Danger Decal, Outer Tube 1 21 78608 Danger Decal, Outer Shield 1 50053126SP DRIVESHAFT for Model BH215 with Slip Clutch REF. NO. PART NO. DESCRIPTION QTY. 50053126SP Driveshaft Assy for BH215 1 1 76711 Complete Collar Yoke 1 2 64694 Cross Journal Set 2 3 76152 Complete Disc Clutch 1 4 50053143 Guard Retaining Collar, Outer 1 5 50056404 Bolt 6 6 50053144 Guard Retaining Collar, Inner 1 7 50053161 Complete Shield (50053126) 1 8 50017480 Ball Collar Kit 1-3/8 1 9 76080 Spring 8 10 76159 Flanged Yoke 1 11 76195 Bushing 1 12 76194 Lining Ring 2 13 76064 Tapered Pin Set 1-3/8 1 14 76161 Clutch Support 1 15 76196 Pressure Plate 1 16 44300 Capscrew M10 x 1.25 x 80 8 17 44298 Hex Nut M10 x 1.25 8 18 50053146 Half Female Shaft w/shield (50053126) 1 19 - Half Male Shaft w/shield (50053126) 1 20 78786 Danger Decal, Outer Tube 1 21 78608 Danger Decal, Outer Shield 1 121-3-4
MODEL BH217 50053133SP DRIVELINE ASSEMBLY With SLIP CLUTCH 540 RPM 3 18 9 10 11 12 14 12 15 16 13 17 8 1 2 21 20 19 4 22 2 6 5 7 5 REF. PART NO. NO. DESCRIPTION QTY. 50053133SP Driveline Assembly BH217 1 1 76801 Complete Collar Yoke 1 2 64610 Cross Journal Set 2 3 50050544 Complete Disc Clutch F29 1 4 50053169 Guard Retaining Collar, Outer 1 5 50056404 Bolt 6 6 50053240 Guard Retaining Collar, Inner 1 7 50053249 Complete Shield 1 8 50017480 Ball Collar Kit 1-3/8 1 9 76080 Spring 8 10 76081 Flanged Yoke 1 11 76082 Bushing 1 12 76083 Lining Ring 2 13 76247 Tapered Pin Set 1-3/4 1 14 76309 Clutch Support F29 1 15 76085 Inner Plate 1 16 76086 Pressure Plate 1 17 44155BH Capscrew M10 x 1.5 x 85 8 18 44154BH Lock Nut M10 x 1.5 8 19 Half Female Shaft w/ Shield 1 20 Half Male Shaft w/ Shield 1 21 78786 Danger Decal, Outer Tube 1 22 78608 Danger Decal, Outer Shield 1 121-3-5
MODELS BH215, BH216 & BH217 HITCH ASSEMBLY 1$ e 1( o 1) 1% 1& t u y1* 1( 1! 1) i r 1# i r 1^ 1* yu t i q 1@ y w y t REF. PART NO. NO. DESCRIPTION QTY. 1 20294 HHCS 5/8 x6-1/2 G5 ZP 1 2 50080067 Bushing.88 x.67 x 5.3 OL 1 3 20510 HHCS 3/4 x 2-1/4 G5 ZP 4 4 50050393 Wear Bushing 1 5 15598BH Locknut 5/8 CP 3 6 20748 Flatwasher 5/8 SAE ZP 4 7 50050555 Strut Weldment Bushing 2 8 20638 Locknut 3/4 CP 5 9 19037 HHCS 3/4 x 5-1/2 G5 ZP 1 10 50050392 Spacer Bushing 2 11 50033665 Cat 1 QH Top Bushing 1 12 50080339 RH Strut, BH215 1 50080365 RH Strut, BH216 1 50080149 RH Strut, BH217 1 13 50080063 Toggle, RH 1 14 50080338 LH Strut, BH215 1 50080364 LH Strut, BH216 1 50080148 LH Strut, BH217 1 15 50080062 Toggle, LH 1 16 50080060 RH Riser Strut 1 17 50080059 LH Riser Strut 1 18 19053 HHCS 5/8 x 2-1/4 G5 ZP 2 19 50080366 Bushing 3 121-4-1
MODELS BH215 & BH216 TAILWHEEL and RELATED PARTS 20 19 19 18 17 16 REF. PART NO. NO. DESCRIPTION QTY. 1 50068496SP Tailwheel Assy. 1 2 50067492 Caster Fork Weld. 1 3 500BH Solid Tire Assy. 1 4 50068522 Hub Casting 1 5 44269 Flatwasher M12 4 6 44204BH Capscrew M12 x 1.75 x 25 Gr8.8 4 7 50067488 Axle Bolt 1 8 120BH Slotted Hex Nut 3/4 NF CP 1 9 50068521 Bearing Assy. 2 10 50068525 Seal 2 11 50068523 Bushing 2 12 50068520 Protective Cap 2 13 50068524 Washer 2 14 50067495 Roll Pin, 10 x 50, Metric 1 15 20167 Cotter Pin 3/16 x 2 1 16 449BH Grease Fitting 2 17 50080069 Tailwheel Tube Weld. for BH215 1 50080101 Tailwheel Tube Weld. for BH216 1 18 44625 Capscrew 5/8 x 4-3/4 Gr.5 1 19 20748 Flatwasher 5/8 2 20 15598BH Locknut 5/8 1 121-5-1
MODEL BH217 TAILWHEEL and RELATED PARTS 20 19 19 18 17 15 REF. PART NO. NO. DESCRIPTION QTY. 1 50069838 Tailwheel Assy. 1 2 500BH Solid Tire Assy. 1 3 50068522 Hub Casting 1 4 44269 Flatwasher M12 4 5 44204BH Capscrew M12 x 1.75 x 25 Gr8.8 4 6 50067488 Axle Bolt 3/4-16 Thread 2 7 120BH Slotted Nut 3/4-16 Thread 1 8 50068521 Bearing Assy. 2 9 50068525 Seal 2 10 50068523 Bushing 2 11 50068520 Cap, Protective 2 12 50068524 Washer 2 13 44824BH Roll Pin1/2 x 2-1/2 1 14 20167 Cotter Pin 3/16 x 2 1 15 449BH Grease Fitting 2 16 50069839 Fork Assy. 1 17 50080146 Tailwheel Tube Weld. for BH217 1 18 44625 Capscrew 5/8 x 4-3/4 Gr.5 1 19 20748 Flatwasher 5/8 2 20 15598BH Locknut 5/8 1 121-5-2
SELMA, AL 3670 WWW.BUSHHOG.COM