Precise, cost-effective durable.

METAL Precise, cost-effective durable. The FEIN core drilling system.

PREFACE User-friendly solutions from the specialist. FEIN is the specialist for durable power tools and user-friendly solutions which stand up to the toughest continual use in industry and manual trades. In 1895 FEIN revolutionised manual work by inventing the first electric hand drill. Even today, FEIN core drilling units embody the same innovative spirit. If you undertake a lot of core drilling work, FEIN makes your decision an easy one. You ll be impressed by just how user-friendly, precise and reliable the FEIN core drilling units are. FEIN core drilling units allow you to tackle a whole host of jobs on the construction site and in the workshop. Thanks to more than 25 years of ongoing further development, FEIN has achieved perfection in core drilling technology. FEIN is offering you a metal core drilling system, in which the tool, core bit and accessories are perfectly coordinated. We offer you premium quality solutions from one source. First-class materials and excellent workmanship make FEIN core drilling units truly durable. From the robust drill motor in the barrel-type motor housing and the die-cast aluminium transmission head to the drill jig and electronics, all the components are produced by FEIN! That s the quality you d expect from the Made in Germany label! No matter whether you re drilling steel, stainless steel or aluminium, we ve got the right solution for every application, thanks to our extensive range of core bits and system accessories. The FEIN core drilling system will revolutionise your work! 2

CONTENTS Introduction Core drilling 4 FEIN system competence 5 Highlights 6 FEIN core drilling units Safety 8 QuickIN system 9 FEIN core drilling units FEIN core drilling range 11 FEIN KBM 32 Q 12 FEIN KBM 50 QX 13 FEIN KBM 52 U 14 FEIN KBM 65 Q / KBM 65 QF 15 FEIN KBM 80 U 16 FEIN KBM 80 auto 17 FEIN core bits and accessories Carbide or HSS? 19 Carbide core bits 20 HSS core bits 22 Centring pins, adapters, 23 drive arbors Thread cutting accessories 24 KBM 80 accessories 25 Clamping fixtures 26 Cooling and lubricating 27 Useful information Thread cutting 30 Countersinking 32 Reaming 33 TCT/ HSS speed 34 Tool dimension sheet 35 Technical data 36 Service 37 3

CORE DRILLING Drill better. Work more cost-effectively. Core drilling with the FEIN core drilling system delivers precise drilling results in a much shorter working time and the costs per hole are considerably reduced compared with standard processes. Core drilling with FEIN allows you to reap key fi nancial benefi ts: Excellent work progress for fast drilling By dispensing with predrilling and tool changes, your working time is cut by up to 40 % The smaller cutting surface reduces the power requirement and the required feed force Cuts working time by up to 40 % Core drilling Twist drilling 0 % 50 % 60 % 100 % Time Less power and time, less swarf Core drilling applications F F Centring, predrilling, fi nish drilling a FEIN core bit combines all of these steps Unlike twist drilling, core drilling only involves machining a narrow ring and not the entire drilling surface, which requires much less feed force. This means that the core drilling unit consumes less power, putting less pressure on the user, core bit and the tool. The combined centring and ejector pin automatically ejects the drill core once you have broken through the material. You can core Cross-section View from above bit a diameter of up to 80 in material up to 50 thick in just one step. You can also drill overlapping holes, for slots, for example, and offset holes. All of this makes core drilling an extremely costeffective drilling process it s faster, more precise and saves more energy than twist drilling. The FEIN clamping fi xtures, which are available as accessories, allow for effi cient and cost-effective working even when drilling pipes, in nonmagnetic materials or on a structured base. 4

FEIN SYSTEM COMPETENCE Benefit from the FEIN system competence. You ll be unlikely to find another manufacturer of power tools that can provide you with as much experience in core drilling as FEIN. Over the decades, FEIN has developed the expertise that it applies to each and every core drilling unit. No matter whether you re working in metal construction, steel construction, bridge construction, machine construction or tank construction, you ll always achieve the best drilling result with FEIN core drilling units! After all, you re benefiting from a perfect interplay of core drilling unit and core bits in one system. The result is a perfect hole pattern, with virtually no burr formation at an impressive speed. All components are produced by FEIN. From the drill jig, motor and transmission to the electronics, all the components are produced by FEIN featuring outstanding materials and quality of workmanship. The same applies to the FEIN core bits. High-quality carbides, HSS steels containing cobalt and sophisticated cutting geometries ensure the best cutting performances and very long service lives. But FEIN core drilling units can do more than just tackle core drilling applications. They re also ideal for mobile twist drilling, thread cutting, countersinking and reaming. Faster working in all materials With a cutting speed of up to 45 m / min, FEIN core drilling units* allow for fast work progress and high levels of cost-effectiveness in virtually all materials. A multitude of applications in one system FEIN core drilling units are extremely versatile. The tool holder on the tools enables the use of various pieces of equipment for drilling, thread cutting, reaming and countersinking. * Core drilling units in conjunction with carbide core bits. Not just for core drilling but for all coon areas of application Diameter of tool () 90 80 70 60 50 40 30 20 Core drilling Twist drilling Thread cutting Core drilling Twist drilling Thread cutting Countersinking Reaming Core drilling Twist drilling Thread cutting Countersinking Reaming Core drilling Twist drilling Thread cutting Countersinking Reaming Core drilling Twist drilling Thread cutting Countersinking Reaming Core drilling, twist drilling, thread cutting, countersinking, reaming FEIN core drilling units cover all coon areas of application. 10 0 KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 65 QF KBM 80 U KBM 80 auto 5

HIGHLIGHTS There are a number of good reasons to use core drilling units. Ours last a lifetime. From the KBM 32 Q to the KBM 80 auto, FEIN core drilling units keep their promises for a lifetime. Their robustness and reliability also stand the test of time, as do their simple handling, high levels of safety and cost-effective use that deliver outstanding results. Core drilling units from FEIN provide you with everything you need to core bit on the construction site or in the workshop. An extensive range of accessories specially coordinated to the FEIN core drilling units ensure that you always get the right solution for drilling, thread cutting, and of course countersinking and reaming. FEIN durability FEIN core drilling units are designed to stand up to the toughest continual use in industry and manual trades. To meet these requirements, they have a few special design features: a drill motor in a barrel-type motor housing, the transmission housing and drill jig are made from robust metal and last but not least, a high-power motor designed for a long service life and maximum performance. Outstanding operation FEIN core drilling units are easy to operate thanks to the new "Viseo touch pad" operating concept, for example. The FEIN QuickIN quick change system allows you to change tools in a flash without having to use a wrench or adjust the drill position. The stroke range can easily be increased for large drilling tools. High magnetic holding force The tool needs to be secure such that you can convert all of its power into work efficiency. In FEIN core drilling units, the already high magnetic holding force of the electromagnets is automatically increased when drilling is started. This ensures that the drill jig remains secure even when the drill shaft is experiencing high torque levels. Optimum power-to-weight ratio FEIN core drilling units are extremely light and are therefore extremely well suited to on-site installation work. But their optimum power-to-weight ratio will also be appreciated when used as a workshop tool, and results from their compact design, aluminium components for drill jigs, dove-tail guide, transmission housing and compact high-power motor. 6

HIGHLIGHTS Speed-controlled tacho electronics The speed-controlled tacho electronics enable even, rapid work progress even at high loads. FEIN high-power motor The high-torque FEIN high-power motor is extremely reliable and allows for effi cient, cost-effective drilling. The compact rotor and stator position ensures optimum, virtually loss-free power conversion. Extra large stroke range The extra large stroke range with robust and precise double dove-tail guide allows you to use the largest tools without having to remove the tool from the workpiece. Safe handling The separate positions of the drill switch and the magnetic switch make the tool particularly easy to handle and considerably reduce the risk of incorrect operation. Mechanical transmission The mechanical transmission with perfectly coordinated speed levels allows for an optimum cutting speed. Its high level of effi ciency ensures that the motor power is transferred to the core bit with virtually no loss. QuickIN quick change system The FEIN QuickIN allows you to change tools in a fl ash. One click and the tool is in the perfect location. No need for wrenches, no need to adjust the drill position and no need to re-centre. Integrated cooling lubricant unit The interior cooling lubrication provides a direct supply of coolant to the drill bit, ensuring long tool service lives and a clean cut. High magnetic holding force The already high magnetic holding force of the electromagnet is automatically increased when drilling is started. This is a basic requirement if the full power of the tool is to be converted into work effi ciency. Compact design Their compact design and optimum power-to-weight ratio make FEIN core drilling units the ideal tool for mobile twist drilling, thread cutting, countersinking and reaming. 7

SAFETY A safe application: core drilling with FEIN. FEIN core drilling units aren t just extremely durable, powerful, precise and cost-effective, they re also among the safest tools on the market thanks to their extensive safety concept. From easy-to-use switches, an electronic magnetic force booster, a visual holding force display, Viseo touch pad operation, a robust contact and swarf guard and electronic overload protection to the torque slipping clutch for the automatic drill feed, all the safety systems share one purpose: to make working with FEIN core drilling units as safe as possible. For any application in any location. Clean surface secure tool Clean material surface Thin, uneven, dirty, scaled material surface Distance between magnet and assembly surface (workpiece) 0,2 0,4 0,6 Magnetic holding force 100 % 80 % 66 % 43 % The core drilling unit must be secure if you are to core bit successfully. This can only be achieved if the magnetic foot is placed on an even and clean workpiece that is at least 12 thick. If this is not the case, you risk losing a considerable amount of the magnetic holding force. KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 65 QF KBM 80 U KBM 80 auto Operator Core drilling unit and tool Restart lock Prevents the tool from starting up independently and unexpectedly if power is suddenly restored. Electronic magnetic holding force The electronic magnetic holding force is increased when drilling starts for even better operational safety. Reduced voltage when the drill motor is inactive prevents the coils from overheating. Soft start Electronic overload protection Sufficient response time to adjust to the core drilling unit. The operator won t be surprised by the machine starting at full power. Drill motor is protected from current peaks when switching on. No damage due to overloading and overheating. Unit can be restarted iediately. Visual magnetic holding force display Indicates whether the magnetic holding force is sufficient. Tilt sensor Stops the drill motor if the core drilling unit is tipped. Locked magnetic switch when the drill motor is active The magnetic foot cannot be deactivated accidentally. If the drill motor is active: press once: motor off /press twice: magnet off. Automatic drill feed No direct contact with moving machine parts. Operator only uses the control function. Lower bit wear thanks to constant spindle feed force. Tension belt Belt prevents the machine from falling down if the power is cut accidentally. The core drilling unit is not damaged if the tool falls from a steel girder. Drill switch and magnetic switch in separate positions Reduced risk of incorrect operation thanks to switches in separate locations. Contact guard No accidental contact with rotating machine parts. MT shank secured with retainer nut The MT tool holder cannot be removed from the spindle if the load is too high. Torque slipping clutch Prevents the core drilling unit from breaking away from the work surface. Protects the drive spindle during overload. Cutting teeth are not subject to shock and impact loads. Viseo touch pad control Control can always be seen, as it is located on the top of the drill motor. Minimises the risk of incorrect operation. Storage case Plastic case allows the tool to be stored and transported safely. Accessories are stored safely in a separate compartment in the case. 8

QUICKIN SYSTEM For instant tool changes: the FEIN QuickIN system. Change tools with more ease and at faster speeds you won t regret your investment! With FEIN QuickIN it takes just one click for the tool to be perfectly located in the holder. You benefi t from effi cient, cost-effective working and precise results. No need for wrenches, no need to adjust the drill position and no need to recentre. It s four times faster changing a core bit with QuickIN than with a Weldon holder, for example. The FEIN QuickIN offers other benefi ts too. You can use your existing core bits and accessories with M 18 x 6 or Weldon holders with an adapter. It s the perfect system for changing tools in a fl ash. Perfect for fast tool changes the FEIN QuickIN system for all holders KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 80 U KBM 80 auto KBM 65 QF QuickIN ½" B 16 M 18 x 6 Weldon Weldon Special KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 65 QF Cuts working time significantly Changing the core bit FEIN QuickIN: Weldon holder: 5 7 sec. 20 30 sec. In a direct comparison, the FEIN QuickIN system shows how fast and user-friendly core bit changes can now be. 9

Introduction Core drilling 4 FEIN system competence 5 Highlights 6 FEIN core drilling units Safety 8 QuickIN system 9 FEIN core drilling units FEIN core drilling range 11 FEIN KBM 32 Q 12 FEIN KBM 50 QX 13 FEIN KBM 52 U 14 FEIN KBM 65 Q / 15 KBM 65 QF FEIN KBM 80 U 16 FEIN KBM 80 auto 17 FEIN core bits and accessories Carbide or HSS? 19 Carbide core bits 20 HSS core bits 22 Centring pins, adapters, 23 drive arbors Thread cutting accessories 24 KBM 80 accessories 25 Clamping fixtures 26 Cooling and lubricating 27 Useful information Thread cutting 30 Countersinking 32 Reaming 33 TCT/ HSS speed 34 Tool dimension sheet 35 Technical data 36 Service 37 10

FEIN CORE DRILLING RANGE Six core drilling units in first-class FEIN quality With the FEIN core drilling range, you re well-equipped for all tasks in manual trades and industry, as you get first-class quality and outstanding drilling results. The FEIN core drilling range includes six different models three assembly tools and three workshop tools which are specifically designed for certain areas of application, tasks and ways of working. From the compact KBM 32 Q assembly tool to the fully-automatic KBM 80 auto workshop tool, each FEIN core drilling unit delivers optimum results and features outstanding characteristics. KBM 32 Q Compact core drilling unit with high mobility for installation jobs KBM 50 QX Core drilling unit with two-speed transmission for efficient on-site drilling. KBM 52 U Universal core drilling unit for flexible on-site working KBM 65 Q / KBM 65 QF Powerful core drilling unit with twospeed transmission for the workshop KBM 80 U Universal core drilling unit with outstanding power for the workshop KBM 80 auto Fully-automatic core drilling unit for outstanding efficiency in the workshop Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 KBM 32 Q KBM 50 QX KBM 52 U well suited very well suited *only with thread cutting tool KBM 65 Q KBM 65 QF KBM 80 U Core drilling in metal with a of up to 32 Core drilling in metal with a of up to 50 Core drilling in metal with a of up to 65 Core drilling in metal with a of up to 80 KBM 80 auto Twist drilling with drill chuck (DIN 338) Twist drilling with MT holder (DIN 345) Thread cutting * * * Countersinking Reaming Fully-automatic drilling Working with one hand Working overhead Installation work Workshop jobs 11

CORE DRILLING UNIT UP TO 32 MM KBM 32 Q Compact core drilling unit with high mobility for installation jobs. The KBM 32 Q allows you to core bit with a diameter of between 12 and 32. Thanks to its compact dimensions and low weight of just 10.5 kg, the KBM 32 Q is ideally suited to on-site installation work. It is easy to attach to the workpiece and enables reliable working throughout the entire process even if you re working vertically or overhead. In addition to its high mobility, the tool is characterised by extreme precision and ease of handling. FEIN benefits Small, extremely light core drilling unit with excellent handling for vertical and overhead use QuickIN system for fast tool changes without a wrench Continuously variable double dove-tail guide enables use of long drilling tools without the tool having to be removed from the workpiece High-torque high-power motor Powerful electromagnet Electronic magnetic holding force Integrated cooling lubricant unit Electronic overload protection Restart lock Technical data Model KBM 32 Q Core bit max. 32 Core bit, max. drilling depth 50 Twist drill max. 13 Thread cutting max. M 12 Power / consumption W 700 Power / output W 450 Idling speed rpm 550 Load speed rpm 440 Core bit holder QuickIN Stroke 135 Total stroke range 260 Magnetic holding force N 9000 Magnetic foot dimensions 160 80 Cable with plug m 4 Weight according to EPTA kg 10,5 7 270 27 Applications Core drilling Twist drilling with drill chuck Thread cutting with thread cutting tool Included in price: 1 case; 1 cooling lubricant pump; 1 tension belt; 1 swarf hook; 1 key-type drill chuck with of up to 13 ; 1 QuickIN adapter for M 18 x 6 P 1.5; 2 centring pins; 1 contact guard Wide range of accessories: from page 20 Tool dimension sheet: page 35 12

CORE DRILLING UNIT UP TO 50 MM KBM 50 QX Core drilling unit with two-speed transmission for efficient on-site drilling. The KBM 50 QX covers an extended area of application. Its mechanical two-speed transmission supplies enough torque to core bit with diameters of up to 50. Two electronic speed levels enable reaming and countersinking and also provide a drilling function for hard materials. The KBM 50 QX is one of the lightest tools in its segment and can therefore be used vertically and overhead with ease. FEIN benefits Mechanical two-speed transmission with two electronic speed levels enables expanded range of applications and uses such as reaming and countersinking QuickIN system for fast tool changes without a wrench Continuously variable double dove-tail guide enables use of long drilling tools without the tool having to be removed from the workpiece Compact design and optimum power-to-weight ratio High-torque high-power motor Speed-controlled tacho electronics Powerful electromagnet Applications Electronic magnetic holding force Integrated cooling lubricant unit Electronic overload protection Restart lock Technical data Model KBM 50 QX Core bit max. 50 Core bit, max. drilling depth 50 Twist drill max. 16 Thread cutting max. M 16 Countersinking max. 31 Reaming max. 16 Power / consumption W 1200 Power / output W 680 Load speed First gear slow rpm 160 First gear fast rpm 260 Second gear slow rpm 320 Second gear fast rpm 520 Core bit holder QuickIN Stroke 135 Total stroke range 310 Magnetic holding force N 11 000 Magnetic foot dimensions 180 90 Cable with plug m 4 Weight according to EPTA kg 12.8 7 270 33 Core drilling Twist drilling with drill chuck Thread cutting with thread cutting tool Included in price: 1 case; 1 cooling lubricant pump; 1 tension belt; 1 swarf hook; 1 key-type drill chuck with of up to 13 ; 1 QuickIN adapter for M 18 6 P 1.5; 2 centring pins; 1 contact guard Wide range of accessories: from page 20 Tool dimension sheet: page 35 Countersinking Reaming 13

CORE DRILLING UNIT UP TO 50 MM KBM 52 U Universal core drilling unit for flexible on-site working. The KBM 52 U is the first choice for users requiring a universal range of applications and high flexibility. The light two-speed tool with MT 3 holder, clockwise and anti-clockwise rotation and electronic speed reduction allows for thread cuts of up to M 16. The speed that was used last is automatically saved and can be called back up for the next drilling process. This makes the tool one of the most cost-effective solutions, even for serial core drilling work with a diameter of up to 50. The KBM 52 U is extremely versatile. FEIN benefits Mechanical two-speed transmission and continuously variable electronic speed reduction enables an optimum cutting speed for drilling, thread cutting, reaming and countersinking Flexible tool use and high concentricity thanks to a combination of QuickIN and MT 3 holders Continuously variable double dove-tail guide enables use of long drilling tools without the tool having to be removed from the workpiece Compact design and optimum powerto-weight ratio Clockwise/anti-clockwise rotation High-torque high-power motor Speed-controlled tacho electronics Powerful electromagnet Electronic magnetic holding force Applications Speed-saving memory function Integrated gravity-fed cooling lubricant unit Easy to use with one hand Electronic overload protection Restart lock Technical data Model KBM 52 U Core bit max. 50 Core bit, max. drilling depth 50 Twist drill max. 23 Thread cutting max. M 16 Countersinking max. 50 Reaming max. 23 Power / consumption W 1200 Power / output W 640 Load speed First gear rpm 130 260 Second gear rpm 260 520 Core bit holder QuickIN Tool holder MT 3 Stroke 135 Total stroke range 310 Magnetic holding force N 11 000 Magnetic foot dimensions 180 90 Cable with plug m 4 Weight according to EPTA kg 14.2 7 270 31 Core drilling Twist drilling with drill chuck or MT3 holder Thread cutting with thread cutting quick change chuck Included in price: 1 case; 1 coolant tank; 1 tension belt; 1 swarf hook; 1 key-type drill chuck with of up to 13 ; 1 QuickIN adapter for M 18 6 P 1.5; 2 centring pins; 1 drift key; 1 contact guard Wide range of accessories: from page 20 Tool dimension sheet: page 35 Countersinking Reaming

CORE DRILLING UNIT UP TO 65 MM KBM 65 Q / KBM 65 QF Powerful core drilling unit with two-speed transmission for the workshop. The robust and powerful FEIN two-speed tools KBM 65 Q and KBM 65 QF are perfect introductions to the class of workshop tools. Both tools provide an ideal speed for heavy-duty use with a core bit diameter of up to 65. Thanks to their extremely large stroke range, they are the ideal solution for special applications such as deep drilling or thread cutting. The tool spindle on the tools enables flexible use of MT 3 tools with high concentricity. The KBM 65 QF can also be finely adjusted, guaranteeing outstanding results. FEIN benefits Powerful even in tough applications such as core drilling with a of up to 65 or thread cutting up to M 20 Flexible tool use and high concentricity thanks to a combination of QuickIN and MT 3 holders Continuously variable double dove-tail guide enables use of long drilling tools without the tool having to be removed from the workpiece KBM 65 QF: Fine adjustment of drill spindle for easy alignment of tool without the time-consuming task of removing and refitting the magnet Optimum power-to-weight ratio Mechanical two-speed transmission 2 electronic speed levels per gear Speed-controlled tacho electronics Powerful electromagnet Applications Integrated cooling lubricant unit Electronic overload protection Restart lock KBM 65 Q and KBM 65 QF available only in 230V Technical data Model KBM 65 Q KBM 65 QF Core bit max. 65 65 Core bit, max. drilling depth 50 50 Twist drill max. 23 23 Thread cutting max. M 20 20 Countersinking max. 50 50 Reaming max. 23 23 Power / consumption W 1460 1460 Power / output W 650 650 Load speed First gear slow rpm 125 125 First gear fast rpm 250 250 Second gear slow rpm 255 255 Second gear fast rpm 510 510 Core bit holder QuickIN QuickIN Tool holder MT 3 3 Stroke 145 145 Total stroke range 330 330 Adjustment range for drill jigs ± 6 Swivel range for drill jigs ± 8 Magnetic holding force N 12 000 12 000 Magnetic foot dimensions 184 92 184 92 Cable with plug m 4 4 Weight according to EPTA kg 19.0 20.6 7 270 29 7 270 28 Core drilling Twist drilling with drill chuck or MT3 holder Thread cutting with thread cutting tool Included in price: 1 case; 1 cooling lubricant pump; 1 tension belt; 1 swarf hook; 1 key-type drill chuck with of up to 13 ;1 QuickIN adapter for M 18 x 6 P 1.5; 2 centring pins; 1 drift key; 1 contact guard Countersinking Reaming Wide range of accessories: from page 20 Tool dimension sheet: page 35 15

CORE DRILLING UNIT UP TO 80 MM KBM 80 U Universal core drilling unit with outstanding power for the workshop. The KBM 80 U workshop tool is the ideal tool for those wanting to use a core drilling unit for the entire range of applications: core drilling, drilling, thread cutting, countersinking and reaming. The KBM 80 U combines everything you need to work professionally: a 2000 watt high-power motor with a powerful three-speed transmission, clockwise / anti-clockwise rotation, an MT 3 holder, electric speed reduction and a memory function to save the speed for serial drilling work. FEIN benefits Mechanical three-speed transmission with continuously variable electronic speed reduction enables an optimum cutting speed for core drilling, drilling, thread cutting, countersinking and reaming. Flexible tool use and high concentricity thanks to a combination of QuickIN and MT 3 holders High-torque, high-power motor for efficient core drilling up to 80 and thread cuts up to M 27 QuickIN MAX quick change system Extra large stroke range Clockwise/anti-clockwise rotation Speed-controlled tacho electronics Powerful electromagnet Electronic magnetic holding force Visual magnetic holding force display Applications Fine adjustment of drill spindle Automatic coolant supply Torque slipping clutch Viseo touch pad control Speed-saving memory function Electronic overload protection Technical data Model KBM 80 U TCT core bit max. 80 HSS core bit max. 65 Core bit, max. drilling depth 50 Twist drill max. 32 Thread cutting max. M 27 Countersinking max. 50 Reaming max. 31 Power / consumption W 2000 Power / output W 900 Load speed First gear rpm 110 180 Second gear rpm 160 260 Third gear rpm 350 580 Core bit holder QuickIN / QuickIN MAX Tool holder MT 3 Stroke 145 Total stroke range 285 Adjustment range for drill jigs ± 4,25 Swivel range for drill jigs ± 11 Magnetic holding force N 18000 Magnetic foot dimensions 270 90 Cable with plug m 4 Weight according to EPTA kg 25,4 7 270 34 Core drilling Twist drilling with drill chuck or MT3 holder Thread cutting with thread cutting quick change chuck Included in price: 1 case; 1 coolant tank; 1 tension belt; 1 swarf hook, 1 key-type drill chuck with of up to 13 ; 1 QuickIN adapter for M 18 x 6 P 1.5; 2 centring pins; 1 drift key; 1 contact guard Countersinking Reaming Wide range of accessories: from page 20 QuickIN MAX accessories: page 25 Tool dimension sheet: page 35

CORE DRILLING UNIT UP TO 80 MM KBM 80 auto Fully-automatic core drilling unit for outstanding efficiency in the workshop. The KBM 80 auto workshop tool sets new standards for core drilling diameters up to 80 in terms of productivity, flexibility and operational safety. Its automatic drill feed enables reproducible drilling times and constant work progress in all materials. It saves a lot of time and money, particularly for large drilling jobs. The KBM 80 auto also considerably increases operational safety, as you don t have to intervene in the drilling process. As the first fully-automatic core drilling unit with a digitallycontrolled drill feed, the KBM 80 auto ensures levels of efficiency never seen before in the workshop. FEIN benefits Saves time and money when working on large drilling jobs as the digitally-controlled drill feed ensures constant work progress in all materials with low tool wear Thanks to reproducible and timed drilling times, working hours for coissioned and serial work can be planned High levels of operational safety thanks to extensive safety package including torque slipping clutch, visual magnetic holding force display and Viseo touch pad control High-torque high-power motor MT 3 holder QuickIN MAX quick change system QuickIN quick change system Extra large stroke range Clockwise/anti-clockwise rotation Speed-controlled tacho electronics Applications Powerful electromagnet Electronic magnetic holding force Fine adjustment of drill spindle Automatic coolant supply Speed-saving memory function Electronic overload protection Technical data Model KBM 80 auto TCT core bit max. 80 HSS core bit max. 65 Core bit, max. drilling depth 50 Twist drill max. 32 Thread cutting max. M 27 Countersinking max. 50 Reaming max. 31 Power / consumption W 2000 Power / output W 900 Load speed First gear rpm 110 180 Second gear rpm 160 260 Third gear rpm 350 580 Core bit holder QuickIN / QuickIN MAX Tool holder MT 3 Stroke 145 Total stroke range 285 Adjustment range for drill jigs ± 4.25 Swivel range for drill jigs ± 11 Magnetic holding force N 18000 Magnetic foot dimensions 270 90 Cable with plug m 4 Weight according to EPTA kg 26.4 7 270 32 Core drilling Twist drilling with drill chuck or MT 3 holder Thread cutting with thread cutting quick change chuck Included in price: 1 case; 1 coolant tank; 1 tension belt; 1 swarf hook, 1 key-type drill chuck with of up to 13 ; 1 QuickIN adapter for M 18 x 6 P 1.5; 2 centring pins; 1 drift key; 1 contact guard Countersinking Reaming Wide range of accessories: from page 20 QuickIN MAX accessories: page 25 Tool dimension sheet: page 35 17

Introduction Core drilling 4 FEIN system competence 5 Highlights 6 FEIN core drilling units Safety 8 QuickIN system 9 FEIN core drilling units FEIN core drilling range 11 FEIN KBM 32 Q 12 FEIN KBM 50 QX 13 FEIN KBM 52 U 14 FEIN KBM 65 Q / KBM 65 QF 15 FEIN KBM 80 U 16 FEIN KBM 80 auto 17 FEIN core bits and accessories Carbide or HSS? 19 Carbide core bits 20 HSS core bits 22 Centring pins, adapters, 23 drive arbors Thread cutting 24 accessories KBM 80 accessories 25 Clamping fixtures 26 Cooling and lubricating 27 Useful information Thread cutting 30 Countersinking 32 Reaming 33 TCT/ HSS speed 34 Tool dimension sheet 35 Technical data 36 Service 37

CARBIDE OR HSS? Tough jobs need tough tools. In addition to the application-oriented core drilling unit range, FEIN also offers you an extensive range of core bits. In addition to highly durable and powerful carbide core bits, it also includes HSS core bits with a 5% cobalt content that are extremely resistant to impact and shock. FEIN carbide core bits are primarily used in continuous operation, in serial drilling work in industry, workshops and manual trades, for example. As long as they are handled properly, carbide core bits have a tool service life that is up to double that of HSS core bits and are therefore the most cost-effective solution for this area. FEIN HSS core bits are mainly used on the construction site and for on-site installation work particularly if the core bit is exposed to high shock and impact loads. FEIN TCT Ult r a FEIN HSS DU r a FEIN HSS PrI M a FEIN tct S Very long service life thanks to high-quality carbide equipment and outstanding cutting performance in all materials. See page 20 /page 25 Outstanding service life thanks to 5% cobalt content and titanium aluminium nitrate surface coating for optimum drilling results in steel, stainless steel and cast iron. See page 23 Long service life thanks to 5 % cobalt content for first-class drilling results in steel and metal construction. See page 22 Special core bit, extremely tough for use in track and rail construction. See page 21 Material Alu < 10 % Si < 600 N/ 2 Alu > 10 % Si < 600 N/ 2 Steel < 500 N/ 2 Steel < 750 N/ 2 Steel < 900 N N/ 2 Steel < 1100 N/ 2 Steel < 1400 N/ 2 Stainless steel < 700 N N/ 2 Stainless steel > 700 N/ 2 Cast iron (grey cast iron, globular cast iron) < 300 N/ 2 Brass (CuZn) < 500 N/ 2 Hard-to-cut materials Rails Surface Flat surfaces Structured surfaces Pipe surface Round surfaces Offset surfaces Special application Dry drilling Stepped drilling Multi-layer drilling Overlapping drilling well suited very well suited ideal 19

CORE BITS Carbide core bit The FEIN tungsten carbide tipped ult r a core bit is excellently suited to continuous use in industry, workshops and manual trades. The high-quality carbide equipment and a special cutting geometry ensure very long service lives and outstanding cutting performance. They also offer extreme fl exibility in terms of the materials the tool can drill, ranging from aluminium and general construction steel to hard-to-cut materials. Service life of TCT compared with the competition FEIN tct Ult r a TCT from other manufacturers 0 50 100 150 200 250 300 350 400 Number of drill holes Test conditions: While carbide products from other manufacturers achieved an average result of 190 holes per core bit, the FEIN TCT ult r a created 380 holes. Material: C 45 steel, 30 thick; : 18 TCT Ult r a core bit with QuickIN holder Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 35 No. in pack 1 12 6 31 27 086 01 9 13 6 31 27 087 01 3 14 6 31 27 088 01 1 15 6 31 27 089 01 5 15.5 6 31 27 238 01 1 16 6 31 27 090 01 7 17 6 31 27 091 01 6 17.5 6 31 27 239 01 5 18 6 31 27 092 01 9 19 6 31 27 093 01 3 19.5 6 31 27 240 01 7 20 6 31 27 094 01 1 21 6 31 27 095 01 5 22 6 31 27 096 01 8 23 6 31 27 097 01 2 24 6 31 27 098 01 0 25 6 31 27 099 01 4 26 6 31 27 100 01 5 26.5 6 31 27 241 01 6 27 6 31 27 101 01 4 28 6 31 27 102 01 7 29 6 31 27 103 01 1 30 6 31 27 104 01 9 31 6 31 27 105 01 3 32 6 31 27 106 01 6 No. in pack 1 33 6 31 27 107 01 0 34 6 31 27 108 01 8 35 6 31 27 109 01 2 36 6 31 27 110 01 4 37 6 31 27 111 01 3 38 6 31 27 112 01 6 39 6 31 27 113 01 0 40 6 31 27 114 01 8 41 6 31 27 115 01 2 42 6 31 27 116 01 5 43 6 31 27 117 01 9 44 6 31 27 118 01 7 45 6 31 27 119 01 1 46 6 31 27 120 01 3 47 6 31 27 121 01 2 48 6 31 27 122 01 5 49 6 31 27 123 01 9 50 6 31 27 124 01 7 51 6 31 27 125 01 1 52 6 31 27 126 01 4 53 6 31 27 127 01 8 54 6 31 27 128 01 6 55 6 31 27 129 01 0 56 6 31 27 130 01 2 57 6 31 27 131 01 1 58 6 31 27 132 01 4 59 6 31 27 133 01 8 60 6 31 27 134 01 6 61 6 31 27 135 01 0 62 6 31 27 136 01 3 63 6 31 27 137 01 7 64 6 31 27 138 01 5 65 6 31 27 139 01 9 Multi-packs Use our multi-packs and enjoy savings. All promotional packs come with between 1 and 3 free core bits! 3+1 7+3 No. in pack 4 12 6 31 27 086 02 0 13 6 31 27 087 02 0 14 6 31 27 088 04 0 15 6 31 27 089 02 0 16 6 31 27 090 02 0 17 6 31 27 091 02 0 18 6 31 27 092 03 0 19 6 31 27 093 02 0 20 6 31 27 094 02 0 21 6 31 27 095 02 0 22 6 31 27 096 02 0 23 6 31 27 097 02 0 24 6 31 27 098 02 0 25 6 31 27 099 02 0 26 6 31 27 100 02 0 27 6 31 27 101 02 0 28 6 31 27 102 02 0 29 6 31 27 103 02 0 30 6 31 27 104 02 0 31 6 31 27 105 02 0 32 6 31 27 106 02 0 No. in pack 10 12 6 31 27 086 03 0 13 6 31 27 087 03 0 14 6 31 27 088 05 0 15 6 31 27 089 03 0 16 6 31 27 090 03 0 17 6 31 27 091 03 0 19 6 31 27 093 03 0 20 6 31 27 094 03 0 21 6 31 27 095 03 0 22 6 31 27 096 03 0 23 6 31 27 097 03 0 24 6 31 27 098 03 0 25 6 31 27 099 03 0 26 6 31 27 100 03 0 27 6 31 27 101 03 0 28 6 31 27 102 03 0 29 6 31 27 103 03 0 30 6 31 27 104 03 0 31 6 31 27 105 03 0 32 6 31 27 106 03 0 Set Consists of 4 core bits with a of 14, 18, 22 and 32 (cutting depth 35 ) and 1 centring pin (105 ) in a plastic carry case 6 31 27 088 03 0 TCT Ult r a 2" core bit with QuickIN holder Very long service life and outstanding cutting performance. Imperial dimensions, cutting depth 2" / 50 in No. in pack 1 ½" 12.70 6 31 27 383 01 0 ⁹ ₁₆" 14.29 6 31 27 384 01 0 ⅝" 15.88 6 31 27 385 01 0 ¹¹ ₁₆" 17.46 6 31 27 386 01 0 18 6 31 27 092 04 0 ¾" 19.05 6 31 27 387 01 0 20

CORE bits ¹³ ₁₆" 20.64 6 31 27 388 01 0 ⅞" 22.23 6 31 27 389 01 0 ¹⁵ ₁₆" 23.81 6 31 27 390 01 0 1" 25.40 6 31 27 391 01 0 1 ¹ ₁₆" 26.99 6 31 27 392 01 0 23 6 31 27 021 01 3 24 6 31 27 022 01 6 25 6 31 27 004 01 0 26 6 31 27 005 01 4 27 6 31 27 023 01 0 TCT S core bit with FEIN thread M 18 x 6 P 1.5 Specially developed for use in track and rail construction. Extremely hard cutting teeth and an optimum cutting geometry ensure the best results. Metric dimensions, cutting depth 50 36 6 31 27 300 01 0 37 6 31 27 301 01 0 38 6 31 27 302 01 0 39 6 31 27 303 01 0 40 6 31 27 304 01 0 1 ¹ ₅" 28.58 6 31 27 393 01 0 28 6 31 27 006 01 7 41 6 31 27 305 01 0 1 ³ ₁₆" 30.16 6 31 27 394 01 0 1 ¼" 31.75 6 31 27 395 01 0 1 ⁵ ₁₆" 33.34 6 31 27 396 01 0 1 ⅜" 34.93 6 31 27 397 01 0 1 ⁷ ₁₆" 36.51 6 31 27 398 01 0 1 ½" 38.10 6 31 27 399 01 0 1 ⁹ ₁₆" 39.19 6 31 27 400 01 0 1 ⅝" 41.28 6 31 27 401 01 0 1 ¹¹ ₁₆" 42,86 6 31 27 402 01 0 29 6 31 27 024 01 8 30 6 31 27 007 01 1 31 6 31 27 025 01 2 32 6 31 27 008 01 9 33 6 31 27 026 01 5 34 6 31 27 009 01 3 35 6 31 27 010 01 5 36 6 31 27 027 01 9 37 6 31 27 028 01 7 No. in pack 1 24 6 31 27 056 01 2 26 6 31 27 057 01 6 30 6 31 27 058 01 4 32 6 31 27 059 01 8 33 6 31 27 048 01 5 36 6 31 27 060 01 0 40 6 31 27 436 01 0 42 6 31 27 306 01 0 43 6 31 27 307 01 0 44 6 31 27 308 01 0 45 6 31 27 309 01 0 46 6 31 27 310 01 0 47 6 31 27 311 01 0 48 6 31 27 312 01 0 49 6 31 27 313 01 0 50 6 31 27 314 01 0 1 ¹³ ₁₆" 44.45 6 31 27 403 01 0 1 ¹³ ₁₆" 46.04 6 31 27 404 01 0 1 ⅞" 47.63 6 31 27 405 01 0 1 ¹⁵ ₁₆" 49.21 6 31 27 406 01 0 2" 50.80 6 31 27 407 01 0 38 6 31 27 011 01 4 39 6 31 27 029 01 1 40 6 31 27 012 01 7 41 6 31 27 030 01 3 42 6 31 27 013 01 1 TCT Ult r a 50 core bit with Weldon holder Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 51 6 31 27 315 01 0 52 6 31 27 316 01 0 53 6 31 27 317 01 0 54 6 31 27 318 01 0 55 6 31 27 319 01 0 2 ¹ ₁₆" 52.39 6 31 27 408 01 0 43 6 31 27 014 01 9 56 6 31 27 320 01 0 44 6 31 27 031 01 2 57 6 31 27 321 01 0 Set 45 6 31 27 015 01 3 58 6 31 27 322 01 0 Consists of 4 core bits with a of ⁹ ₁₆", ¹¹ ₁₆", ¹³ ₁₆", ¹⁵ ₁₆" (cutting depth 2"/50 ) and 1 centring pin (105 ) in a plastic carry case 6 31 27 384 02 0 TCT Ult r a 50 core bit with FEIN thread M 18 x 6 P 1.5 Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 No. in pack 1 12 6 31 27 042 01 4 13 6 31 27 043 01 8 14 6 31 27 044 01 6 15 6 31 27 045 01 0 16 6 31 27 046 01 3 17 6 31 27 047 01 7 18 6 31 27 001 01 5 19 6 31 27 019 01 2 20 6 31 27 002 01 8 21 6 31 27 020 01 4 22 6 31 27 003 01 2 46 6 31 27 032 01 5 47 6 31 27 033 01 9 48 6 31 27 016 01 6 49 6 31 27 034 01 7 50 6 31 27 017 01 0 51 6 31 27 035 01 1 52 6 31 27 018 01 8 53 6 31 27 036 01 4 54 6 31 27 037 01 8 55 6 31 27 038 01 6 56 6 31 27 039 01 0 57 6 31 27 040 01 2 58 6 31 27 041 01 1 59 6 31 27 049 01 9 60 6 31 27 050 01 1 61 6 31 27 051 01 0 62 6 31 27 052 01 3 63 6 31 27 053 01 7 64 6 31 27 054 01 5 65 6 31 27 055 01 9 No. in pack 1 12 6 31 27 276 01 0 13 6 31 27 277 01 0 14 6 31 27 278 01 0 15 6 31 27 279 01 0 16 6 31 27 280 01 0 17 6 31 27 281 01 0 18 6 31 27 282 01 0 19 6 31 27 283 01 0 20 6 31 27 284 01 0 21 6 31 27 285 01 0 22 6 31 27 286 01 0 23 6 31 27 287 01 0 24 6 31 27 288 01 0 25 6 31 27 289 01 0 26 6 31 27 290 01 0 27 6 31 27 291 01 0 28 6 31 27 292 01 0 29 6 31 27 293 01 0 30 6 31 27 294 01 0 31 6 31 27 295 01 0 32 6 31 27 296 01 0 33 6 31 27 297 01 0 34 6 31 27 298 01 0 35 6 31 27 299 01 0 59 6 31 27 323 01 0 60 6 31 27 324 01 0 61 6 31 27 325 01 0 62 6 31 27 326 01 0 63 6 31 27 327 01 0 64 6 31 27 328 01 0 65 6 31 27 329 01 0 21

CORE BITS HSS core bit The FEIN HSS Pr i m a core bits are made from extremely high-quality high-speed steel. A 5% cobalt content ensures long service lives and increased shock and impact resistance. FEIN HSS Pr i m a core bits deliver fi rst-class drilling results in steel and metal construction and allow you to drill very cost-effectively in installation applications. Service life of HSS compared with the competition FEIN HSS PrI M a HSS from other manufacturers 0 50 100 150 200 Number of drill holes Test conditions: While HSS products from other manufacturers achieved an average result of 100 holes per core bit, the FEIN HSS Pr i m a created 140 holes. Material: C 45 steel, 30 thick; : 18 HSS Pr I M a core bit with QuickIN holder Multi-packs HSS Pr I M a 1" core bit with QuickIN holder Set 5% cobalt alloy for long service lives. Metric dimensions, cutting depth 35 Use our multi-packs and enjoy savings. Buy 7 drills, get 1 free! 7+1 No. in pack 8 12 6 31 27 194 02 0 5 % cobalt alloy for long service lives, imperial dimensions, cutting depth 1" / 25 Consists of 4 core bits with a of ⁹ ₁₆", ¹¹ ₁₆", ¹³ ₁₆", ¹⁵ ₁₆" (cutting depth 1"/25 ) and 1 centring pin in a plastic carry case 6 31 27 411 02 0 13 6 31 27 195 02 0 14 6 31 27 196 02 0 No. in pack 1 12 6 31 27 194 01 0 13 6 31 27 195 01 4 14 6 31 27 196 01 7 15 6 31 27 197 01 1 16 6 31 27 198 01 9 17 6 31 27 199 01 3 18 6 31 27 200 01 1 19 6 31 27 201 01 0 20 6 31 27 202 01 3 21 6 31 27 203 01 7 22 6 31 27 204 01 5 23 6 31 27 205 01 9 24 6 31 27 206 01 2 25 6 31 27 207 01 6 26 6 31 27 208 01 4 27 6 31 27 209 01 8 28 6 31 27 210 01 0 29 6 31 27 211 01 9 30 6 31 27 212 01 2 31 6 31 27 213 01 6 32 6 31 27 214 01 4 15 6 31 27 197 02 0 16 6 31 27 198 02 0 17 6 31 27 199 02 0 18 6 31 27 200 02 0 19 6 31 27 201 02 0 20 6 31 27 202 02 0 21 6 31 27 203 02 0 22 6 31 27 204 02 0 23 6 31 27 205 02 0 24 6 31 27 206 02 0 25 6 31 27 207 02 0 26 6 31 27 208 02 0 27 6 31 27 209 02 0 28 6 31 27 210 02 0 29 6 31 27 211 02 0 30 6 31 27 212 02 0 31 6 31 27 213 02 0 32 6 31 27 214 02 0 in No. in pack 1 ⁷ ₁₆" 11.11 6 31 27 409 01 0 ½" 12.70 6 31 27 410 01 0 ⁹ ₁₆" 14.29 6 31 27 411 01 0 ⅝" 15.88 6 31 27 412 01 0 ¹¹ ₁₆" 17.46 6 31 27 413 01 0 ¾" 19.05 6 31 27 414 01 0 ¹³ ₁₆" 23.81 6 31 27 415 01 0 ⅞" 22.23 6 31 27 416 01 0 ¹⁵ ₁₆" 23.81 6 31 27 417 01 0 1" 25.40 6 31 27 418 01 0 1 ¹ ₁₆" 26.99 6 31 27 419 01 0 1 ¹ ₅" 28.58 6 31 27 420 01 0 1 ³ ₁₆" 30.16 6 31 27 421 01 0 1 ¼" 31.75 6 31 27 422 01 0 1 ⁵ ₁₆" 33.34 6 31 27 423 01 0 1 ⅜" 34.93 6 31 27 424 01 0 1 ⁷ ₁₆" 36.51 6 31 27 425 01 0 1 ½" 38.10 6 31 27 426 01 0 1 ⁹ ₁₆" 39.19 6 31 27 427 01 0 1 ⅝" 41.28 6 31 27 428 01 0 1 ¹¹ ₁₆" 42.86 6 31 27 429 01 0 1 ¾" 44.45 6 31 27 430 01 0 1 ¹³ ₁₆" 48.04 6 31 27 431 01 0 1 ⅞" 47.63 6 31 27 432 01 0 1 ¹⁵ ₁₆" 49.21 6 31 27 433 01 0 2 50.80 6 31 27 434 01 0 2 ¹ ₁₆" 52.39 6 31 27 435 01 0 22

CORE BITS FEIN HSS Du r a core bits are used where working conditions are permanently adverse or where coolant cannot be used. They are made from high-quality high-speed steel with a cobalt content of 5 %. The surface is covered by a first-class titanium aluminium nitrate coating. It ensures the best glide properties, increased heat resistance and outstanding service lives in steel, stainless steel and cast iron. Service life of coated HSS compared with the competition FEIN HSS Dur a Coated HSS from other manufacturers 0 50 100 150 200 250 Number of drill holes Test conditions: While HSS products from other manufacturers achieved an average result of 140 holes per core bit, the FEIN HSS Du r a created 180 holes. Material: C 45 steel, 30 thick; : 18 Centring pins Length 105 Core bit Holder Cutting depth TCT Ult r a QuickIN 35 HSS Pr i m a QuickIN 35 HSS Du r a QuickIN 35 3 02 17 332 00 9 Length 125 Core bit Holder TCT Ultra 50 QuickIN MAX TCT Ult ra 50 M 18 6 P 1,5 (with adapter 6 39 01 020 00 6) Cutting depth 50 50 TCT Ultra 50 Weldon 50 (with adapter 6 39 01 021 01 4) Competition Weldon 25, 35, 40 (with adapter 6 39 01 021 01 4) Competition M18 6 P 1,5 50 (with adapter 6 39 01 020 00 6) Length 3 ⅜" Core bit Holder Cutting depth HSS Prima 1" QuickIN 1" 7 / 16" HSS Nova 1" QuickIN 1" 7 / 16" 3 02 17 338 00 0 Length 4 ¹¹/₁₆" Core bit Holder Cutting depth Competition Weldon 2" 7 / 16" (with adapter 6 39 01 021 01 4) 3 02 17 337 00 2 The adapter 6 39 01 024 01 must be used for Weldon core bits from other manu-facturers that have an internal hole of > 6.4. HSS Du r a core bit with QuickIN holder 5 % cobalt alloy and surface coating for outstanding service lives and the best glide properties. Metric dimensions, cutting depth 35 No. in pack 1 12 6 31 27 140 01 1 13 6 31 27 141 01 0 14 6 31 27 142 01 3 15 6 31 27 143 01 7 16 6 31 27 144 01 5 17 6 31 27 145 01 9 18 6 31 27 146 01 2 19 6 31 27 147 01 6 20 6 31 27 148 01 4 21 6 31 27 149 01 8 22 6 31 27 150 01 0 23 6 31 27 151 01 9 24 6 31 27 152 01 2 25 6 31 27 153 01 6 26 6 31 27 154 01 4 27 6 31 27 155 01 8 28 6 31 27 156 01 1 29 6 31 27 157 01 5 30 6 31 27 158 01 3 31 6 31 27 159 01 7 32 6 31 27 160 01 9 Set Consists of 6 core bits with a of 14, 16, 18, 20, 22, 26 (cutting depth 35 ) and centring pin in plastic carry case 6 31 27 142 02 9 HSS No v a 1" core bit with Weldon holder Industrial standard. Imperial dimensions, cutting depth 1"/25 in No. in pack 1 ⁷ ₁₆" 11.11 6 31 27 356 01 5 ½" 12.70 6 31 27 357 01 0 ⁹ ₁₆" 14.29 6 31 27 358 01 0 ⅝" 15.88 6 31 27 359 01 0 ¹¹ ₁₆" 17.46 6 31 27 360 01 0 ¾" 19.05 6 31 27 361 01 0 ¹³ ₁₆" 20.64 6 31 27 362 01 0 ⅞" 22.23 6 31 27 363 01 0 ¹⁵ ₁₆" 23.81 6 31 27 364 01 0 1" 25.40 6 31 27 365 01 0 1 ¹ ₁₆" 26.99 6 31 27 366 01 0 1 ¹ ₅" 28.58 6 31 27 367 01 0 1 ³ ₁₆" 30.16 6 31 27 368 01 0 1 ¼" 31.75 6 31 27 369 01 0 3 02 17 333 00 3 Length 135 Core bit Holder Cutting depth TCT Ult ra QuickIN 35 (with adapter 6 39 01 045 01 0) HSS Pr i m a QuickIN 35 (with adapter 6 39 01 045 01 0) HSS Du r a QuickIN 35 (with adapter 6 39 01 045 01 0) Competition Weldon 50 (with adapter 6 39 01 021 01 4) 3 02 17 355 00 0 Length 4 ⅛" Core bit Holder Cutting depth TCT Ultra 2" QuickIN 2" HSS Prima 1" QuickIN 1" HSS Nova 1" Weldon 1" 3 02 17 332 00 9 Length 4 ¹¹/₁₆" Core bit Holder Cutting depth TCT Ultra 2" QuickIN MAX 2" HSS Prima 1" QuickIN 1" (with adapter 6 39 01 045 01 0) Competition Weldon 1", 1 3 / 8" (with adapter 6 39 01 021 01 4) 3 02 17 333 00 3 Length 5 ⁵/₁₆" Core bit Holder Cutting depth TCT Ultra 2" QuickIN 2" (with adapter 6 39 01 045 01 0) Competition Weldon 2" (with adapter 6 39 01 021 01 4) 3 02 17 355 00 0 23

ACCESSORIES FEIN is your competent partner for thread cutting. Electric thread cutting isn t just faster and doesn t just require less physical effort than working by hand, it also provides clear benefi ts in terms of precision. FEIN offers you an extensive range of accessories for this, from the thread cutting tool and quick change chuck to the thread cutting inserts for blind holes and through holes. Adapter/drill chuck Adapter with QuickIN holder Output M 18 x 6 P 1.5 6 39 01 020 00 6 Weldon output Extension for use on confined, deep, or layered surfaces, through holes possible from a of 36. QuickIN holder, length 100, incl. centring pin 6 31 06 016 01 0 Thread cutting Thread cutting quick change chuck for KBM 52 U can only be used for core drilling units with anti-clockwise rotation. Size 2, with QuickIN holder, for thread drills (DIN 374/376) in conjunction with thread cutting inserts with or without M 6 - M 16 safety clutch Size 2 thread cutting inserts for thread drills in accordance with DIN 374/376 Thread M 6 4,5 3.4 6 32 06 117 01 5 M 8 6 4.9 6 32 06 095 01 1 Drive arbors M 10 7 5.5 6 32 06 096 01 4 6 39 01 021 01 4 Special Weldon output. Specially designed for core bits from other manufacturers that have an internal hole of > 6.4 QuickIN drive arbors for using FEIN core bits on bench and column drilling tools and all other core drilling units with an MT holder. Incl. hand pump and centring pin for external cooling lubricant supply. 9 26 02 079 01 0 Thread cutting tool for KBM 32 Q and KBM 50 QX Size 2, with QuickIN holder, for thread drills (DIN 374/376), in conjunction with thread cutting inserts with or without M 6 - M 16 safety clutch. Incl. torque support M 12 9 7 6 32 06 097 01 8 M 14 11 9 6 32 06 098 01 6 M 16 12 9 6 32 06 099 01 0 M 18 14 11 6 32 06 100 01 1 M 20 16 12 6 32 06 101 01 0 with safety clutch for blind holes 6 39 01 024 01 9 1/2" output Taper 6 39 01 022 00 8 B 16 output 6 39 01 023 00 2 MT3 12 65 6 39 01 019 01 3 MT2 12 35 6 39 01 018 01 9 for retrofitting the KBM 52 U (7 270 31), KBM 65 Q (7 270 26) and KBM 65 QF (7 270 23) models. Integrated cooling lubricant supply 9 26 02 072 01 2 Thread cutting tool for KBM 65 Q and KBM 65 QF Size 2, with MT 3 holder, for thread drills (DIN 374/376), in conjunction with thread cutting inserts with or without M 6 - M 20 safety clutch. Incl. torque support Thread M 6 4.5 3.4 6 32 06 118 01 3 M 8 6 4.9 6 32 06 102 01 3 M 10 7 5.5 6 32 06 103 01 7 M 12 9 7 6 32 06 104 01 5 M 14 11 9 6 32 06 105 01 9 M 16 12 9 6 32 06 106 01 2 Adapter with Weldon holder to convert other manufacturers products to the QuickIN system 6 39 01 027 01 0 Taper MT3 12 65 6 39 01 017 01 1 Conversion kit for previous model KBM 542 to QuickIN quick change system 9 26 02 066 01 2 M 18 14 11 6 32 06 107 01 6 M 20 16 12 6 32 06 108 01 4 Thread drills are available from specialist dealers KBM 80 U / 80 auto accessories see page 26 Key-type drill chuck with QuickIN holder Clamping width No. in pack 1 6 39 01 028 01 8 1.5 13 6 39 01 023 02 0 1 16 6 39 01 023 01 1 KBM 80 U / 80 auto accessories see page 25 24

KBM 80 ACCESSORIES FEIN KBM 80 QuickIN MAX accessories fits together what belongs together. KBM 80 U KBM 80 auto With a wide range of accessories, from core bits, centring pins and adapters to special drive arbors for various drives, FEIN ensures that everything falls into place perfectly when you re core drilling with the KBM 80. The QuickIN MAX tool holder allows TCT Ult r a 50 core bits to fit to tools from other manufacturers with a Weldon 32 standard holder. QuickIN Quic kin MAX Size 3 threaded chuck WRE 3/2 MT3/ Weldon 32 Holder shank extension MT3 TCT Ul t r a 50 core bit with QuickIN MAX holder Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 78 6 31 27 458 01 0 79 6 31 27 459 01 0 80 6 31 27 460 01 0 Size 3 threaded insert Size 2 threaded insert Drill chuck with QuickIN holder QI QIM M22 M27 M6 M20 TCT Ul t r a 2" core bit with QuickIN MAX holder Very long service life and outstanding cutting performance. Imperial dimensions, cutting depth 2"/50 Adapter/drill chuck Adapter with QuickIN MAX holder QuickIN output QuickIN MAX output For retrofitting KBM 80 U / KBM 80 auto. With integrated cooling lubricant supply. For all FEIN QuickIN MAX core bits with a of 50 80 No. in pack 1 50 6 31 27 330 01 0 51 6 31 27 331 01 0 52 6 31 27 332 01 0 53 6 31 27 333 01 0 54 6 31 27 334 01 0 55 6 31 27 335 01 0 56 6 31 27 336 01 0 57 6 31 27 337 01 0 58 6 31 27 338 01 0 59 6 31 27 339 01 0 60 6 31 27 340 01 0 61 6 31 27 341 01 0 62 6 31 27 342 01 0 63 6 31 27 343 01 0 64 6 31 27 344 01 0 65 6 31 27 345 01 0 66 6 31 27 346 01 0 67 6 31 27 347 01 0 68 6 31 27 348 01 0 69 6 31 27 349 01 0 70 6 31 27 350 01 0 71 6 31 27 351 01 0 72 6 31 27 352 01 0 73 6 31 27 353 01 0 74 6 31 27 354 01 0 75 6 31 27 355 01 0 in No. in pack 1 2" 50.80 6 31 27 437 01 0 2 ¹ ₁₆" 52.39 6 31 27 438 01 0 2 ⅛" 53.98 6 31 27 439 01 0 2 ³ ₁₆" 55.56 6 31 27 440 01 0 2 ¼" 57.15 6 31 27 441 01 0 2 ⁵ ₁₆" 58.74 6 31 27 442 01 0 2 ⅜" 60.33 6 31 27 443 01 0 2 ⁷ ₁₆" 61.91 6 31 27 444 01 0 2 ½" 63.50 6 31 27 445 01 0 2 ⁹ ₁₆" 65.09 6 31 27 446 01 0 2 ⅝" 66.68 6 31 27 447 01 0 2 ¹¹ ₁₆" 68.26 6 31 27 448 01 0 2 ¾" 69.85 6 31 27 449 01 0 2 ¹³ ₁₆ 71.44 6 31 27 450 01 0 2 ⅞" 73.03 6 31 27 451 01 0 2 ¹⁵ ₁₆" 74.61 6 31 27 352 01 0 3" 76.20 6 31 27 353 01 0 3 ¹ ₁₆" 77.79 6 31 27 454 01 0 3 ⅛" 79.38 6 31 27 455 01 0 Centring pin Centring pin for QuickIN MAX core bits Length in 125 3 02 17 333 00 3 6 39 01 045 01 0 Key-type drill chuck with QuickIN holder Clamping width in 1.5 13 6 39 01 023 02 0 Clamping width in 1 16 6 39 01 023 01 1 MT 3 drive arbors QuickIN output For retrofitting KBM 80 U / KBM 80 auto. With integrated cooling lubricant supply. For all QuickIN core bits with a of 12 65 6 39 01 038 02 0 Weldon 32 standard output Specially designed for core bits with cutting surfaces offset by 90. Maximum cutting depth 50 6 39 01 041 01 0 Weldon 32 output Cutting surfaces in line. Maximum cutting depth 75. Specially designed for core bits from: Hougen 6 39 01 042 01 0 Jancy 6 39 01 040 01 0 MT 3 holder shank MT 3 output. Specially designed for countersinking 76 6 31 27 456 01 0 77 6 31 27 457 01 0 6 39 01 039 02 0 6 33 04 005 00 0 25

ACCESSORIES Thread cutting with the KBM 80 Thread cutting quick change chuck for KBM 80 can only be used for core drilling units with anti-clockwise rotation. Size 3, with QuickIN MAX holder, for thread drill (DIN 374 / 376), in conjunction with thread cutting inserts with or without M 22 M 27 safety clutch Whether they re magnetic or not, there s a FEIN clamping fixture for every purpose. FEIN offers alternative clamping fixtures for materials and workpieces with which the core drilling unit s electromagnet cannot be used. These range from a suction plate for non-magnetic materials like stainless steel or aluminium and a vacuum plate for e.g. chequered metal or bulb plate, which is used in conjunction with a vacuum pump to a fixture for drilling pipes with a diameter of between 60 and 300. 9 26 02 082 01 0 Size 3 thread cutting inserts for thread drills in accordance with DIN 374/376 Clamping fixtures Vacuum plate for non-magnetic materials and structured bases (chequered metal, bulb plate etc.) Must be used in conjunction with the vacuum pump Suction plate for non-magnetic materials, 250 x 330 x 110 General accessories Contact and swarf guard prevents accidental contact with rotating parts and increases passive safety. Also suited to retrofitting KBM 32 Q, 50 Q, 50 QX and KBM 52 U Thread M 22 / M 24 18 14.5 6 32 06 119 01 0 Cannot be used for KBM 80 9 26 02 054 01 6 6 39 01 037 01 0 M 27 20 16 6 32 06 120 01 0 with safety clutch for blind holes Vacuum plate 396 x 200 x 95 for KBM 32 Q, 50 QX, 52 U, 65 Q, 65 QF 9 26 02 057 01 7 Pipe drill fixture incl. tension belt, to make holes on pipes with a pipe of between 60 and 300, 220 x 130 Vacuum plate 396 x 350 x 95 for KBM 80 U, 80 auto 9 26 02 085 01 0 Thread Vacuum pump Suction rate 0.015 m3/ min, 0.8 bar, 92 watts, weight 2.5 kg, incl. suction hose M 22 / M 24 18 14,5 6 32 06 122 01 0 M 27 20 16 6 32 06 123 01 0 Interchangeable reducing insert (WRE 3/2) Reducing insert for holding size 2 thread cutting inserts (M 6 - M 20) in size 3 quick change chuck. (9 26 02 082 01 0) 9 26 02 055 01 0 9 26 01 022 01 3 6 32 06 125 01 0 26

COOLING AND LUBRICATING Long service lives perfect drilling results. Sufficient and reliable cooling increases tool service lives and guarantees better work progress. In FEIN core drilling units, the coolant is supplied by an integrated interior cooling lubrication. The coolant and lubrication fluid is delivered straight to the core bit s cutters. If this isn t the case, as when working overhead for example, external cooling is required. We would recoend working with coolant spray in this situation. Coated core bits like the FEIN HSS Dur a deliver the best results for dry drilling. Long service life thanks to the right lubricant Material Alu < 10% Si < 600 N/2 Alu > 10% Si < 600 N/2 Steel < 500 N/2 Steel < 750 N/2 Steel < 900 N/2 Steel < 1100 N/2 Steel < 1400 N/2 Stainless steel < 700 N/2 Stainless steel > 700 N/2 Cast iron (grey cast iron) < 300 N/2 Brass (CuZn) < 500 N/2 Hard-to-cut materials Rails Lubricant Emulsion, Petroleum* Emulsion, Petroleum* Emulsion Emulsion Emulsion, high-performance cutting oil Emulsion, high-performance cutting oil Emulsion, high-performance cutting oil Emulsion Emulsion, high-performance cutting oil Emulsion, dry Emulsion Emulsion, high-performance cutting oil Emulsion, high-performance cutting oil * do not pour into coolant tank KBM 80! The coolant and lubricant must be optimally matched to the material to be machined to ensure a long drilling tool service life. Cooling Hand pump Capacity approx. 450 ml. Suited to FEIN core drilling units KBM 32 Q, KBM 50 QX, KBM 52 U, KBM 65 Q, KBM 65 QF Gravity-fed cooling lubricant unit. Capacity approx. 500 ml, precise dosing of flow rate by ball valve. Suited to FEIN core drilling units KBM 32 Q, KBM 50 QX and KBM 52 U manufactured from 2006 3 21 32 022 00 7 The interior cooling lubrication of the FEIN core drilling units enables rapid, cost-effective work and a long tool service life. 6 39 01 036 01 0 27

Introduction Core drilling 4 FEIN system competence 5 Highlights 6 FEIN core drilling units Safety 8 QuickIN system 9 FEIN core drilling units FEIN core drilling range 11 FEIN KBM 32 Q 12 FEIN KBM 50 QX 13 FEIN KBM 52 U 14 FEIN KBM 65 Q / KBM 65 QF 15 FEIN KBM 80 U 16 FEIN KBM 80 auto 17 FEIN core bits and accessories Carbide or HSS? 19 Carbide core bits 20 HSS core bits 22 Centring pins, adapters, 23 drive arbors Thread cutting accessories 24 KBM 80 accessories 25 Clamping fixtures 26 Cooling and lubricating 27 Useful information Thread cutting 30 Countersinking 32 Reaming 33 TCT / HSS speed 34 Tool dimension sheet 35 Technical data 36 Service 37

Useful information For more than 25 years, FEIN has been synonymous with sound specialist knowledge, extensive expertise and system competence in core drilling, not just in core drilling units and core bits but in their accessories too. The company s experience doesn t just extend to using the right speeds and suitable coolant and lubricant, it also covers all issues to do with thread cutting, reaming and countersinking. That s because core drilling units from FEIN offer key benefits in these applications too. Experience them for yourself on the following pages. Please don t hesitate to contact your FEIN specialist dealer if you have any questions or require detailed advice. And if your core drilling unit isn t working, your FEIN service partner will have it up and running again in no time. That s something you can rely on! FEIN s service embodies complete reliability and lasting quality too. 29

THREAD CUTTING Precise threads from M 6 to M 27. Electric thread cutting is much more precise, faster and requires less effort than working by hand. This particularly applies to thread cutting with FEIN core drilling units. Their large stroke range enables tool changes without having to remove the core drilling unit from the workpiece and without having to realign or recentre the thread cutter when it is fitted. Their individually adjustable, electronic speed reduction and the handwheel-controlled infeed allow for smooth and precise working. When thread cutting in blind holes, special thread cutting inserts with an integrated safety clutch prevent the drill from jaing and breaking in the hole. FEIN offers an extensive range of accessories for thread cutting, from thread cutting tools and thread cutting quick change chucks to M 6 to M 27 thread cutting inserts. In suary, FEIN core drilling units and accessories are also an excellent choice for thread cutting. Thread cutting tool with anti-clockwise rotation With a thread cutting tool, you can expand the functionality of pure core drilling units that only have clockwise rotation to include thread cutting. The tool enables anti-clockwise rotation and retracts the thread drill from the thread hole with precision. Save time with a quick change chuck A thread cutting quick change chuck is the most cost-effective solution for core drilling units with integrated anti-clockwise rotation. Precise results for thread cutting Through hole Cutting speed for thread cutting Blind hole No matter whether you re working with a through hole or blind hole, you ll always achieve precise results in minimal time with FEIN core drilling units. Material Tool Cutting speed [m/min]* Customised thread cutting inserts FEIN thread cutting inserts are coordinated to the corresponding area of application depending on the thread type and thread drill in accordance with DIN 374/376. They are characterised by different inner diameters for a round shank and a square. Alu > 10 % Si < 600 N / 2 Steel < 500 N / 2 Steel > 500 N / 2 Stainless steel < 700 N / 2 Cast iron (grey cast iron) < 300 N / 2 Brass (CuZn) < 500 N / 2 HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT * No responsibility is taken for the correctness of this information 20 40 30 20 25 25 15 20 20 8 10 15 15 25 15 20 40 35 30

THREAD CUTTING KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 65 QF KBM 80 U KBM 80 auto From M 6 to M 27 FEIN has the right solution for every thread diameter. 440 rpm 260 rpm 260 rpm 250 rpm 260 rpm with M 20 180 rpm with M 27 9 26 02 072 01 2 9 26 02 072 01 2 9 26 02 079 01 0 9 26 02 066 01 2 9 26 02 082 01 0 Predrilling Thread cutting Thread / Through hole Blind hole Through hole Blind hole Through hole Blind hole Through hole Blind hole Through hole Blind hole Through hole Blind hole M 6 5,0 6 32 06 125 01 0 + 6 32 06 125 01 0 + 6 39 01 023 02 0 6 32 06 117 01 5 6 32 06 118 01 3 6 32 06 117 01 5 6 32 06 118 01 3 6 32 06 117 01 5 6 32 06 118 01 3 6 32 06 117 01 5 6 32 06 118 01 3 6 32 06 117 01 5 6 32 06 118 01 3 M 8 6,8 6 32 06 125 01 0 + 6 32 06 125 01 0 + 6 39 01 023 02 0 6 32 06 095 01 1 6 32 06 102 01 3 6 32 06 095 01 1 6 32 06 102 01 3 6 32 06 095 01 1 6 32 06 102 01 3 6 32 06 095 01 1 6 32 06 102 01 3 6 32 06 095 01 1 6 32 06 102 01 3 M 10 8,5 6 32 06 125 01 0 + 6 32 06 125 01 0 + 6 39 01 023 02 0 6 32 06 096 01 4 6 32 06 103 01 7 6 32 06 096 01 4 6 32 06 103 01 7 6 32 06 096 01 4 6 32 06 103 01 7 6 32 06 096 01 4 6 32 06 103 01 7 6 32 06 096 01 4 6 32 06 103 01 7 M 12 10,2 6 32 06 125 01 0 + 6 32 06 125 01 0 + 6 39 01 023 02 0 6 32 06 097 01 8 6 32 06 104 01 5 6 32 06 097 01 8 6 32 06 104 01 5 6 32 06 097 01 8 6 32 06 104 01 5 6 32 06 097 01 8 6 32 06 104 01 5 6 32 06 097 01 8 6 32 06 104 01 5 M 14 12,0 6 31 27 086 01 9 6 39 01 023 02 0 6 32 06 098 01 6 6 32 06 105 01 9 6 32 06 098 01 6 6 32 06 105 01 9 6 32 06 098 01 6 6 32 06 105 01 9 6 32 06 125 01 0 + 6 32 06 098 01 6 6 32 06 125 01 0 + 6 32 06 105 01 9 M 16 14,0 6 31 27 088 01 1 6 39 01 023 01 1 6 32 06 099 01 0 6 32 06 106 01 2 6 32 06 099 01 0 6 32 06 106 01 2 6 32 06 099 01 0 6 32 06 106 01 2 6 32 06 125 01 0 + 6 32 06 099 01 0 6 32 06 125 01 0 + 6 32 06 106 01 2 M 18 15,5 6 31 27 238 01 1 6 39 01 023 01 1 6 32 06 100 01 1 6 32 06 107 01 6 6 32 06 125 01 0 + 6 32 06 100 01 1 6 32 06 125 01 0 + 6 32 06 107 01 6 M 20 17,5 6 31 27 239 01 5 6 32 06 101 01 0 6 32 06 108 01 4 6 32 06 125 01 0 6 32 06 125 01 0 + + 6 32 06 101 01 1 6 32 06 108 01 4 M 22 19,5 6 31 27 240 01 7 6 32 06 119 01 0 6 32 06 122 01 0 M 24 21,0 6 31 27 095 01 5 6 32 06 119 01 0 6 32 06 122 01 0 M 27 24,0 6 31 27 098 01 0 6 32 06 120 01 0 6 32 06 123 01 0 31

COUNTERSINKING Countersinking for perfect screw head connections. FEIN core drilling units are characterised by their versatility. They are ideal for all work on completed drill holes, such as deburring or creating profiled or flush offsets. We would particularly recoend deburring and if necessary sinking the drill hole for screw and rivet connections. Only then will screw heads, nuts or rivets sit exactly on the workpiece surface. Depending on the core drilling unit you can use various countersinks for this. For countersinks with a taper holder, the tool is used directly in the drill shaft. If the countersink has a cylindrical holder, you can clamp it using a drill chuck. No matter what you want to connect, FEIN core drilling units enable professional working and perfect drill hole results. Cutting speed for countersinking Material Tool Cutting speed [m / min]* Alu > 10 % Si < 600 N / 2 Steel < 500 N / 2 Steel > 500 N / 2 Stainless steel < 700 N / 2 Cast iron (grey cast iron) < 300 N / 2 Brass (CuZn) < 500 N / 2 HSS Coated HSS TCT** HSS Coated HSS TCT** HSS Coated HSS TCT** HSS Coated HSS TCT** HSS Coated HSS TCT** HSS Coated HSS TCT** 20 25 45 28 34 65 26 32 60 7 8 16 20 25 45 50 60 90 * No responsibility is taken for the correctness of this information ** Solid TCT (SC) Model KBM 50 QX KBM 52 U KBM 65 Q / KBM 65 QF KBM 80 U KBM 80 auto Countersink max. 31 50 50 50 50 Deburr and countersink perfectly with FEIN core bit units such that nuts, screw heads and rivets lie flush to the workpiece surface. 32

REAMING Reaming for precise holes with outstanding surface quality. Reaming creates precise holes with high surface quality. FEIN core drilling units are also ideal for this application, as they offer impressively high concentricity and a precise dove-tail guide, which are required for reaming work. This makes them the ideal tool for mobile reaming in metal and machine construction. Depending on the tool and diameter of the hole, the clamping thickness for reaming is between 0.1 and 0.8. The reamer is either used directly in the drill shaft or clamped with a drill chuck. With FEIN core drilling units you ve got the right tool to hand for every application! Cutting speed for reaming Material Tool Cutting speed [m / min]* Alu > 10 % Si < 600 N / 2 Steel < 500 N / 2 Steel > 500 N / 2 Stainless steel < 700 N / 2 Cast iron (grey cast iron) < 300 N / 2 Brass (CuZn) < 500 N / 2 HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT HSS Coated HSS TCT * No responsibility is taken for the correctness of this information 20 11 15 13 7 9 10 4 6 13 9 12 10 11 15 20 Model KBM 50 QX KBM 52 U KBM 65 Q / KBM 65 QF KBM 80 U KBM 80 auto Reaming max. 16 23 23 31 31 For precise holes with outstanding surface quality mechanical reaming with FEIN core drilling units. 33

APPROXIMATE SPEED VALUES FOR TCT AND HSS It all depends on the right speed. The key to achieving optimum core drilling results is using the right cutting speed. The ideal core bit speed depends on the core bit diameter, the drill type and the material to be drilled. Thanks to their mechanical indexing gears, FEIN core drilling units give you a very good approach at the best possible cutting speed. With FEIN tools with electronic speed reduction, you can fi ne-tune the speed even further. This allows you to get through your work quickly and with a much longer core bit service life. Approximate speed values for TCT Ult r a rpm 800 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 Stainless steel < 700 N / 2 25 m / min < 20 Steel < 750 N / 2 45 m / min 30 40 50 60 70 80 Diameter () Approximate speed values for HSS PrI M a rpm 650 600 550 500 450 400 350 300 250 200 150 100 50 0 Stainless steel < 700 N / 2 6-10 m / min Steel < 750 N / 2 20 25 m / min 10 15 20 25 30 35 40 45 50 Diameter () Approximate speed values for HSS DU r a rpm 800 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 Stainless steel < 700 N / 2 8-12 m / min 10 Steel < 750 N / 2 30 35 m / min 15 20 25 30 35 Diameter () 34

TOOL DIMENSION SHEET The tools and their dimensions. KBM 52U KBM KBM 3232 QQ KBM 50KBM QX50 QX KBM 52 U 18 2 56 n4 mi x 692 ma 62 n3 mi x 660 ma 73 n3 mi x 570 ma 160 38 180 180,5 0 30 60 72 48,5 6 31 60 KBM 80 U KBM 80 U KBM 65 QF KBM 65 Q / KBM 65 QF 48 6 31 KBM 80 auto KBM 80 auto 19 8 22 25 3 31 n5 mi x 818 a m 39 n4 mi x 766 ma 19 7 19 7 6 31 n5 mi x 818 a m 0 0 27 184 58 40 5 37 55 70 27 0 44 55 70 0 44 35

Technical DATA FEIN core drilling units the complete range. KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 65 QF KBM 80 U KBM 80 auto 7 270 27 7 270 33 7 270 31 7 270 29 7 270 28 7 270 34 7 270 32 Core drilling in metal with a of up to 32 Core drilling in metal with a of up to 50 Core drilling in metal with a of up to 65 Core drilling in metal with a of up to 80 Twist drilling with drill chuck (DIN 338) Twist drilling with MT holder (DIN 345) Thread cutting * * * * Countersinking Reaming Fully-automatic drilling Working with one hand Working overhead Installation work Workshop jobs TCT core bit 12 32 12 50 12 50 12 65 12 65 12 80 12 80 Core bit, max. drilling depth 50 50 50 50 50 50 50 Twist drill max. 13 16 23 23 23 32 32 Thread cutting max. M 12 16 16 20 20 27 27 Countersinking max. 31 50 50 50 50 50 Reaming max. 16 23 23 23 31 31 Power / consumption watts 700 1200 1200 1460 1460 2000 2000 Power / output watts 450 680 640 650 650 900 900 Idling speed rpm 550 Load speed First gear rpm 440 130 260 110 180 110 180 Second gear rpm 260 520 160 260 160 260 Third gear rpm 350 580 350 580 First gear slow / fast rpm 160 / 260 125 / 250 125 / 250 Second gear slow / fast rpm 320 / 520 255 / 510 255 / 510 Core bit holder QuickIN QuickIN QuickIN QuickIN QuickIN QuickIN QuickIN MAX QuickIN QuickIN MAX Tool holder MT 3 3 3 3 3 Stroke 135 135 135 145 145 145 145 Total stroke range 260 310 310 330 330 285 285 Adjustment range for drill jigs +/ 6 +/ 4,25 +/ 4,25 Swivel range for drill jigs +/ 8 +/ 11 +/ 11 Magnetic holding force N 9000 11 000 11 000 12 000 12 000 18 000 18 000 Electronic magnetic holding force Magnetic holding force display Magnetic foot dimensions 160 80 180 90 180 90 184 92 184 92 270 90 270 90 Cable with plug m 4 4 4 4 4 4 4 Weight according to EPTA kg 10,5 12,8 14,2 19,0 20,6 25,4 26,4 Automatic drill feed Clockwise/anti-clockwise rotation Electronic speed reduction Memory function Speed-controlled tacho electronics Torque slipping clutch suited very well suited available *only with thread cutting tool 36

SERVICE We re there for you advice, service, warranty. For over 140 years FEIN has been developing new solutions to make your work in manual trades and industry easier. The FEIN core drilling units were also developed to enable you to satisfy the requirements of everyday use faster, more conveniently and more cost effectively: under the toughest conditions, for years to come and with tools and accessories that are perfectly coordinated to these requirements. You also stand to benefi t from this proximity to users in the advice given by our retail partners and our competent service department. Need a hand choosing or using your core drilling unit? Just ask your specialist dealer. He or she will be more than happy to help. Qualified advice The professional and reliable power tools from FEIN are only available from specialist dealers, as this is the only way of guaranteeing you outstanding quality of advice for everything from choosing the right power tool to demonstrating its practical use. Your specialist dealer will be happy to help. Authorised workshops No one can promise that a machine will work forever, especially in tough continuous use as an industrial production tool. But FEIN guarantees that if something should go wrong, it will soon be up and running again. With a dense network of qualifi ed workshops that we have trained personally, FEIN provides a fast, low-cost service for servicing, repairs and safety checks. Professional information 3-year FEIN PLUS warranty FEIN KBM Video Our application video for core drilling includes professional user tips for effi cient and safe working. The video explains all the key applications and core drilling units in detail. Register your new FEIN core drilling unit online at www.fein.com within six weeks of purchase and you ll iediately receive a warranty certifi cate, which in certain countries allows you to enjoy the 3-year FEIN PLUS warranty if you also keep hold of your sales receipt. 3 41 30 385 06 0 37