Crawler Dozer Price quote for: Vendor Name: RDO Equipment Company Contact Person: Jesse Miller Street Address: 12500 Dupont Avenue South P.O. Box: City, State, Zip Burnsville, Minnesota 55337 Phone #: 612.202.6906 Toll Free #: 800.950.3298 Fax #: 952.890.7046 Email Address: jmiller@rdoequipment.com Spec # Information Requested Answer 1.0 Make & Model John Deere 850K Engine Type and net HP John Deere PowerTech PVX 6068 - EPA Interim Tier 4/EU Stage IIIB - 139.5 kw (187 hp) at 1,800 rpm Operating weight Cold weather starting aid(s) Steering type Brake method/type 19 785 kg (43,618 lb.) glow plug hydrostatic Service: Hydrostatic (dynamic) braking stops the machine whenever directioncontrol lever is moved to neutral or the decelerator is depressed to the detent Parking: Exclusive safety feature engages wet, multiple-disc brakes whenever the engine stops, the decelerator is depressed to the end of travel, or the park-lock lever is placed in the start or neutral positions and motion is detected; machine cannot be driven with brake applied, reducing wearout or need for adjustment; springapplied, hydraulic release Track layout Oval Number of track idlers 1 Track gauge 2083 mm (82 in.) Number of track rollers for lower track 8 Length of track on the ground Shoe width Tractor height Ground clearance per SAE J1234 Ground pressure Fuel tank capacity Alternator 3284 mm (129 in.) 610 mm (24 in.) 3161 mm (10 ft. 4.5 in.) 409 mm (16.1 in.) 48.5 kpa (7.03 psi) 356 L (94 gal.) 100 amp
Spec # Information Requested Answer Battery quantity and size Gauges and warning lights Blade and cutting edge (2) Batteries with 190 Minute Reserve Capacity, 950 CCA Electronic Monitor System with Audible and Visual Warning: Engine Coolant Temperature Transmission Oil Temperature Hydraulic Oil Temperature Transmission Pressure Low Alternator Voltage Engine Air Filter Restriction Hydraulic Filter Restriction Transmission Filter Restriction Hydraulic Fan Filter Restriction Water in Fuel Machine Diagnostic Service Code Indicator lights Fasten-Seat-Belt Return-To-Neutral Park Brake Calibration/Service Mode Decelerator Function Mode Digital Readout: Tachometer Alternator Voltage Hourmeter Machine Diagnostic Service Code(s) Transmission Charge Pressure Transmission Direction and Speed Diagnostic Service Codes PAT w/cutting edge Base unit lighting/work lights Grille mounted (2), rear mounted (2), engine compartment (1), and rear reflectors (2) Warranty Term 1 year parts and labor BASE UNIT PRICE: $ 228,361
1 of 9 VENDOR NAME: RDO Equipment Company MAKE AND MODEL: John Deere 850K 1.0 BASE UNIT PRICE: $ 228,361 $ - 2.0 Operator Station Options: Use this section to offer operator station options. Number these items starting with 2.1, 2.2, 2.3, etc. until you have listed all operator station options. 2.01 1700 JDLink Ultimate Cellular for the America's, excluding Costa Rica In Base Price 2.02 1701 JDLink Ultimate Satellite for the America's, excluding Costa Rica $ 1,001 2.03 2500 Topcon Ready $ 4,794 2.04 2575 Not Topcon Ready Requires No Topcon Radio Installation code 2.05/2775 In Base Price 2.05 2775 No Topcon Radio Installation In Base Price 2.06 5025 Canopy Includes floormat 100 amp Alternator In Base Price 2.07 5085 Cab with Roof Mounted Air Conditioner and Heater Includes: 130 Amp Alternator Left and Right quarter hinged windows Tinted safety glass Dome light Heater, roof-mounted 24,000 BTU air conditioner Floormat AM/FM, weather-band radio Dozer). $ 18,698 2.08 5855 Air Suspension Deluxe Comfort Control High Back Vinyl Seat 3 in. (76 mm) retractable seat belt. Backrest tilt, thigh support, lumbar, height, weight and fore-aft positioning. Requires Code 2.06/5025. No Charge 2.09 5885 Air Suspension Deluxe Comfort Control High Back Cloth Seat 3 in. (76 mm) retractable seat belt. Backrest tilt, thigh support, lumbar, height, weight and fore-aft positioning. Requires Code 2.07/5085. In Base Price 2.1 5890 Air Suspension Heated Comfort Control High Back Fabric Seat 3 in. (76 mm) retractable seat belt. Backrest tilt, thigh support, lumbar, height, weight and fore-aft positioning. Requires Code 2.07/5085. $ 410 2.11 9125 Canopy Underseat Heater w/ 2-Speed Fan Requires Code 2.06/5025 $ 855 2.12 AT308106 Rear Wiper and Washer $ 1,059 2.13 AT332199 Rotary Powered Cab Air Precleaner $ 2,211 2.14 AT365703 Trimble (IGC) Interface Package, Paladin-Installed for Cab or Canopy Requires code 6.04/7750 or 6.06/7760. $ 6,292 2.15 AT365704 Topcon (IGC) Interface Package, Paladin-Installed for Cab or Canopy Requires code 6.04/7750 or 6.06/7760. $ 6,704 2.16 AT408433 Leica (IGC) Interface Package, Paladin-Installed for Cab or Canopy Requires code 6.04/7750 or 6.06/7760. $ 7,062 3.0 Engine/Power train Options: Use this section to offer engine and power train options. Number these items starting with 3.1, 3.2, 3.3, etc.. 3.01 9060 Severe-Duty Fuel Filter $ 1,017 $ - 3.02 9065 Chrome Exhaust $ 122 $ - 3.03 9070 Fluid Sampling Ports Fluid Sampling Ports for Engine Oil, Engine Coolant, Hydraulic and Transmission Oils $ 208 $ - 3.04 9075 Quick Service Bank for Transmission, Hydraulic, Engine oil & Engine Coolant Fluid changes Remote Service Bank is inside engine compartment and includes Industry Standard Quick Disconnect Couplers. $ 322
2 of 9 3.05 9085 Fast-Fuel System Fast-fuel Shaw system compatible with Wiggins components $ 1,363 3.06 9130 Single Stage Rotary Ejector Engine Air Precleaner Included in Landfill Package code 9.01/9010. $ 686 3.07 9530 Engine Block Coolant Heater (120 V) $ 90 3.08 AT316425 Fast Fuel Kit Provides ground level fast fueling using a connection located inside the left rear service door. $ 2,294 3.09 AT355770 Engine Intake PreCleaner $ 704 3.1 AT365998 Quick Service $ 1,106 $ - 4.0 Electrical/Lighting Options: Use this section to offer electrical and lighting options. Number these items starting with 4.1, 4.2, 4.3, etc. 4.01 9168 Work Lights, (2) Additional Adds two roof-mounted lights. Included in Landfill Package. $ 214 $ - 4.02 9370 12 Volt Power Port, additional Second power port for code 2.06/5025, canopy. Third power port for code 2.07/5085, cab. $ 136 $ - 4.03 AT211191 110 Volt Engine Coolant Heater, (1000 Watt) Frame Attachment: $ 600 $ - 5.0 Undercarriage & Track Options: Use this section to offer undercarriage and track options. Number these items starting with 5.1, 5.2, 5.3, etc.. 5.01 4510 40 Link with 24 in. (610 mm) Moderate Service Shoes In Base Price #VALUE! 5.02 4515 40 Link with 30 in. (760 mm) Moderate Service Shoes With Clipped Corners (Requires Code 7.04/1040 or 7.05/1050) $ 753 5.03 4520 40 Link with 22 in. (559 mm) Extreme Service Shoes (Requires Code 7.04/1040 or 7.05/1050) $ (201) 5.04 4525 40 Link with 24 in. (610 mm) Extreme Service Shoes (Requires Code 7.04/1040 or 7.05/1050) $ 321 5.05 4530 40 Link with 30 in. (760 mm) Extreme Service Shoes With Clipped Corners (Requires Code 7.04/1040 or 7.05/1050) $ 1,074 5.06 4535 45 Link with 24 In. (610 mm) Moderate Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 340 5.07 4540 45 Link with 30 in. (760 mm) Moderate Service Shoes With Clipped Corners (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 1,412 5.08 4545 45 Link with 36 in. (914 mm) Moderate Service Shoes With Clipped Corners (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 2,484 5.09 4550 45 Link with 22 in. (559 mm) Extreme Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 168 5.1 4555 45 Link with 24 in. (610 mm) Extreme Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 891 5.11 4560 45 Link with 30 in. (760 mm) Extreme Service Shoes With Clipped Corners (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 1,961 5.12 4565 45 Link with 36 in. (914 mm) Extreme Service Shoes With Clipped Corners (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 2,951 5.13 4610 40 Link with Extended Life Bushings and 24 in. (610 mm) Moderate Service Shoes (Requires Code 7.04/1040 or 7.05/1050) $ 2,445 5.14 4615 40 Link with Extended Life Bushing and 30 In.(760mm) Moderate Service Shoes With Clipped Corners (Requires Code 7.04/1040 or 7.05/1050) $ 3,196 5.15 4620 40 Link with Extended Life Bushing and 22 in. (559 mm) Extreme Service Shoes (Requires Code 7.04/1040 or 7.05/1050) $ 2,271 5.16 4625 40 Link with Extended Life Bushing and 24 in. (610 mm) Extreme Service Shoes (Requires Code 7.04/1040 or 7.05/1050) $ 2,764 5.17 4630 40 Link with Extended Life Bushing and 30 in. (760 mm) Extreme Service Shoes (Requires Code 7.04/1040 or 7.05/1050) $ 4,048 5.18 4633 40 Link with Extended Life Bushing and 30 in. (760 mm) Extreme Service Trapezoidal Hole Shoes With Clipped Corners For use with Landfill Applications (Requires Code 7.04/1040 or 7.05/1050) $ 4,579 5.19 4635 45 Link with Extended Life Bushings and 24 in. (610 mm) Moderate Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 3,204 5.2 4640 45 Link with Extended Life Bushings and 30 in. (760 mm) Moderate Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 4,277 5.21 4645 45 Link with Extended Life Bushings and 36 in. (914 mm) Moderate Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 5,349
3 of 9 5.22 4650 45 Link with Extended Life Bushings and 22 in. (559 mm) Extreme Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 3,031 5.23 4655 45 Link with Extended Life Bushings and 24 in. (610 mm) Extreme Service Shoes (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 3,755 5.24 4660 45 Link with Extended Life Bushings and 30 in. (760 mm) Extreme Service Shoes With Clipped Corners (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 4,825 5.25 4663 45 Link with Extended Life Bushings and 30 in. (760 mm) Extreme Service Trapezoidal Hole Shoes With Clipped Corners For use with Landfill Applications (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 5,395 5.26 4665 45 Link with Extended Life Bushings and 36 in. (914 mm) Extreme Service Shoes With Clipped Corners (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 5,814 5.27 4670 45 Link with Extended Life Bushings and 36 in. (914 mm) Extreme Service Trapezoidal Hole Shoes With Clipped Corners For use with Landfill Applications (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) $ 5,910 5.28 9150 Full Length Rock Guards for Outside Dozers Except LGP (Requires Code 7.04/1040 or 7.05/1050) Recommended for applications in rock over 3 in. (76 mm) or side slopes greater than 2:1. Not Recommended for waste or other material packing applications $ 2,449 5.29 9155 Full Length Rock Guards for PAT and LGP Outside Dozers (Requires Code 7.01/1020, 7.02/1025, 7.03/1030 or 7.06/1060) Recommended for applications in rock over 3 in. (76 mm) or side slopes greater than 2:1. Not Recommended for waste or other material packing applications. $ 2,670 5.3 9157 Sprocket Segments with Recesses Recommended for applications in rock over 3 in. (76 mm) or side slopes greater than 2:1. Not recommended when working primarily on slopes and cover material. $ 322 5.31 9160 Bolt-On Final Drive Seal Trash Guards Included in Landfill Package code 9.01/9010. Seal guards are for Dry conditions, like Trash applications or Demolition and NOT for Water/Muddy conditions. ADDITIONAL OPERATOR STATION EQUIPMENT (Order as Desired) $ 1,193 6.0 Hydraulic Options: Use this section to offer hydraulic options. Number these items starting with 6.1, 6.2, 6.3, etc. 6.01 7725 2 Function Hydraulics for Outside Dozer w/ Quick Drop Valve (Requires Code 7.04/1040 or 7.05/1050 or 7.06/1060) In Base Price 6.02 7735 3 Function Hydraulics for Outside Dozer w/ Quick Drop Valve (Requires Code 7.04/1040 or 7.05/1050 or 7.06/1060) Inlcudes auxiliary rear plumbing for ripper. $ 1,813 6.03 7745 3 Function for Power-Angle-Tilt(PAT) (Requires Code 7.01/1020, 7.02/1025, 7.03/1030) $ 1,494 6.04 7750 Integrated Grade Control (IGC) Hydraulics 3 Function for Power-Angle-Tilt (PAT) (Requires Code 7.01/1020, 7.02/1025, 7.03/1030) Not For Use With Code 6.08/7975. $ 2,608 6.05 7755 4 Function for Power-Angle-Tilt (PAT) (Requires Code 7.01/1020, 7.02/1025, 7.03/1030) Includes auxiliary rear plumbing for ripper. $ 2,461 6.06 7760 Integrated Grade Control (IGC) Hydraulics 4 Function for Power-Angle-Tilt (PAT) and Rear Attachment (Requires Code 7.01/1020, 7.02/1025, 7.03/1030) Not For Use With Code 6.08/7975. $ 3,540 6.07 7925 Standard Hydraulic Pump In Base Price 6.08 7975 Hi-Flow Hydraulic Pump for use with Hydraulic Winch Can not be used with code 9.04/9510 Storage Compartment $ 2,073 6.09 7985 Thru-drive Hydraulic Pump for use with Direct Drive Winch $ 2,125 6.1 AT227454 Hydraulic Valve Auxiliary Section $ 2,664 6.11 AT331637 IGC Auxiliary Hydraulic Function This kit will convert code 6.04/7750(IGC) Hydraulics 3 Function for (PAT) to (IGC) Hydraulics 4 Function for (PAT) and Rear Attachment. $ 1,734 6.12 AT377238 Rear Auxiliary Plumbing $ 893 7.0 Blade & Front Options: Use this section to offer blade and front options. Number these items starting with 7.1, 7.2, 7.3, etc.
4 of 9 7.01 1020 Power-Angle-Tilt (PAT) Long Track (LT) Dozer with 82 in. (2083 mm) Gauge - 128 in. (3277 mm) Track on Ground Includes inside mounted C-Frame with low mounted lift cylinders. $ 24,913 $ - 7.02 1025 Power-Angle-Tilt (PAT) Wide Long Track (WLT) Dozer with 88 in. (2235 mm) Gauge - 128 in. (3277 mm) Track on Ground Includes inside mounted C-Frame with low mounted lift cylinders. $ 25,521 7.03 1030 Power-Angle-Tilt (PAT) Low Ground Pressure (LGP) Dozer with 94 In. (2388 mm) Gauge - 128 in. (3277 mm) Track on Ground Includes inside mounted C-Frame with low mounted lift cylinders. $ 39,893 7.04 1040 Standard Track Outside Dozer with 74 in. (1880 mm) Gauge - 109 in. (2770 mm) Track on Ground Includes outside mounted push beams with high mounted lift cylinders. Lift Cylinders with Hoses Routed behind Cylinder Profile (Outside Dozer). In Base Price 7.05 1050 Wide Track (WT) Outside Dozer with 80 in. (2032 mm) Gauge - 109 in. (2770 mm) Track on Ground Includes outside mounted push beams with high mounted lift cylinders. Lift Cylinders with Hoses Routed behind Cylinder Profile (Outside Dozer). $ 884 7.06 1060 Low Ground Pressure (LGP) Outside Dozer 86 in. (2184 mm) Gauge - 128 in. (3277 mm) Track on Ground Includes outside mounted push beams with high mounted lift cylinders. $ 18,048 7.07 7055 146 in. (3708 mm) Long Track (LT) PAT Blade Requires Code 7.01/1020 $ (2,656) 7.08 7060 158 in. (4013 mm) Wide Long Track (WLT) PAT Blade Requires Code 7.02/1025 $ (2,192) 7.09 7065 168 in. (4267 mm) Low Ground Pressure (LGP) PAT Blade Requires Code 7.03/1030 $ (1,652) 7.1 7070 128 in. (3251 mm) Standard Semi-U Blade Requires Code 7.04/1040 In Base Price 7.11 7075 140 in. (3556 mm) Wide Track (WT) Semi-U Blade Requires Code 7.05/1050 $ 964 7.12 7080 152 in. (3861 mm) Low Ground Pressure (LGP) Semi-U Blade Requires Code 7.06/1060 $ 1,549 7.13 7085 154 in. (3912 mm) Low Ground Pressure (LGP) Straight Blade Requires Code 7.061060 $ (35) 7.14 9055 Threaded Pitch Jack Requires code 7.04/1040, 7.05/1050, or 7.06/1060. Adjust between preset pitch hole positions. $ 672 7.15 AT347099 Crawler Blade Reinforcement kit for 158 in. (4013 mm) Wide Long Track (WLT) PAT Blade $ 2,444 7.16 AT347102 Crawler Blade Reinforcement Kit for 146 in. (3708 mm) Long Track (LT) PAT Blade $ 2,343 7.17 AT347103 Crawler Blade Reinforcement Kit for 168 in. (4267 mm) Low Ground Pressure (LGP) PAT Blade $ 2,480 7.18 AT412284 Counterweight, Front, 860 lbs. (389 kg.) $ 4,392 8.0 Rear attachment Options: Use this section to offer rear attachment options. Number these items starting with 8.1, 8.2, 8.3, etc. 8.01 9187 (3) Shank, Parallelogram Ripper $ 16,142 8.02 9250 1000 LB.(453kg.)Rear Counterweight $ 1,370 8.03 9340 Retrieval Hitch for use with Rear Counterweight Not for use with Code 8.04/9343, 8.05/9345, or 8.06/9347. $ 845 8.04 9343 Retrieval Hitch for use w/o Rear Counterweigth Not for use with codes 8.03/9340, 8.05/9345 or 8.06/9347. $ 845 8.05 9345 Extended Rigid Drawbar with Pin for use with Rear Counterweight Requires code 2.07/5085 (Cab). $ 909 8.06 9347 Extended Rigid Drawbar with Pin for use w/o Rear Counterweight Requires code 2.07/5085 (Cab). $ 909 8.07 AT303088 Carco model H90 Power In / Power Out Hydraulic Winch (90,000 lb rated) Less Cable - Winch includes: Variable speed (5-109ft/min) Low speed lock and Brake Off settings Integral drawbar and 3-Roller Fairlead Complete installation requires: OSD units $ 43,802
5 of 9 8.08 AT364351 Parallelogram Hydraulic Ripper Rear-mounted parallelogram hydraulic (3) Pocket Ripper Includes (3) Shanks with Teeth Requires tractor to be built with code 6.02/7735, 6.05/7755 or 6.06/7760 Aux. plumbing. $ 22,313 8.09 AT365810 Hi-Flow Hydraulic Pump with Plumbing for Hydraulic Winch Required For winch installation on units built without code 6.08/7975. Does not work with IGC configuration Requires Fender from Service parts 55 gpm pump. $ 7,344 9.0 Other Options: Use this section to offer options not already stated and only ones that are attached to or specific to Crawler Dozer units. Number these items starting with 9.1, 9.2, 9.3, etc. 9.01 9010 Landfill Package Landfill Package includes: Final Drive Guard Seals Precleaner, Single Stage Rotary Ejector Heavy Duty Grille Cab Roof Mounted Work Lights - 2 fixed forward and 2 adjustable rear Waste Handler decals Requires code 2.07/5085 (Cab). $ 6,248 $ - 9.02 9325 Heavy Duty Grille $ 722 9.03 9365 External Mounted Rear Attachments Mirror Requires Code 2.07/5085 $ 107 9.04 9510 Rear Storage Compartment Not For Use With Code 6.04/7750, 6.06/7760, 6.08/7975, or 9.01/9010. Storage compartment can not be used with tank protection for either forestry or waste handler configured crawlers. $ 412 9.05 9909 Corrosion Prevention Not available for orders outside of US and CA $ 94 9.06 AT306477 Screens, Cab Side Requires Cab Requires Rear Screen (Cab with AC) or Rear Screen (Cab without AC) $ 2,699 9.07 AT306480 Screens, Canopy Side Requires Code 2.06/5025, ROPS/FOPS Canopy Requires Operator Rear Screen (ROPS Canopy) $ 2,697 9.08 AT306481 Screens, Canopy Rear $ 1,672 9.09 AT306519 Tank Guard for Standard and Wide-Track Outside Dozers Tank Guard Plate, 9.25/AT340388 required when both Tank Guard and Winch are installed on ST OSD units. $ 3,634 9.1 AT306520 Outside Dozer Lift Cylinder Mounted Lights $ 1,053 9.11 AT306522 Tank Guard for PAT Dozers Weld, bolt, 5/8 In. plate protects fuel and hydraulic tanks, permits cab tilt Includes Deere decals $ 4,319 9.12 AT306524 Lift Cylinder and Hose Guards For Standard and Widetrack Outside Dozers Bolt-on, Dealer must specify which model (750J or 850J) this will be installed on $ 2,154 9.13 AT306527 Landfill Rear Striker Bars for WT OSD $ 3,891 9.14 AT310972 Blade Trash Rack for WLT PAT (Power Angle Tilt) $ 4,195 9.15 AT317871 Landfill PAT WLT Customworks Installed Package For Use With code 7.02/1025. Requires code 9.01/9010. Installation includes Tank Guards, Lift Cylinder Hose Guards and Precleaner Screen. $ 8,711 9.16 AT317872 Landfill WT OSD Semi-U Customworks Installed Package For Use With code 7.05/1050. Requires Code 9.01/9010. $ 9,656 9.17 AT317873 Lift Cylinder Hose Guard for LGP (OSD) $ 1,838 9.18 AT317875 Lift Cylinder Guard fo all Power Angle Tilt Dozers $ 1,115 9.19 AT323854 Landfill Rear Striker Bars for 850J WLT PAT and 850J LGP PAT/OSD $ 1,865 9.2 AT335782 Landfill Front Strikers for PAT Configuration $ 1,941 9.21 AT335783 Tank Guard for LGP, Outside Dozer Configuration Weld, bolt, 5/8 In. plate protects fuel and hydraulic tanks, permits cab tilt Includes Deere decals $ 4,845 9.22 AT338240 Blade Trash Rack, Landfill, for LGP PAT $ 4,195
6 of 9 9.23 AT338919 Landfill LGP / PAT Customworks Installed Package For Use With code 7.03/1030. Requires code 9.01/9010. Installation includes Tank Guards, Lift Cylinder Hose Guards and Precleaner Screen. $ 9,448 9.24 AT338920 Landfill LGP OSD Semi-U Customworks Installed Package For Use With code 7.06/1060. Requires Code 9.01/9010. $ 10,395 9.25 AT340388 Tank Guard Plate Required on ST or WT OSD units when both Tank Guard and Winch are installed. $ 1,475 9.26 AT349485 Screens, Cab Condenser Guard Bolt-on. Plate covers top, rear and sides of A/C module for complete protection in forestry applications. Requires cab rear screen. $ 1,481 9.27 AT357218 Final Drive Seal Trash Guards $ 2,024 9.28 AT372752 Blade Brush Guard, 45 inch, for OSD $ 1,563 9.29 AT372753 Blade Trash Rack for Wide Track (WT) Semi-U Blade $ 2,824 9.3 AT376583 Blade Trash Rack, Landfill, for LGP OSD S/U & Straight $ 2,985 9.31 AT391346 Limb Riser, Arched $ 4,914 9.32 AT391348 Screens, Cab Front and Door $ 3,669 9.33 AT392767 Screens, Canopy Front & Door $ 4,273 9.34 AT392768 Screens, Cab Full Enclosure Consolidates individual Screen and Limb Riser offerings into a single part number. This number includes full OSHA certified screens and limb risers. $ 12,366 9.35 AT392769 Screens, Canopy Full Enclosure Consolidates individual Screen and Limb Riser offerings into a single part number. This number includes full OSHA certified screens and limb risers. $ 11,872 9.36 AT397449 Landfill Front Strikers for LGP Outside Dozer $ 1,591 9.37 AT397450 Landfill Front Strikers for Wide Track Outside Dozer $ 1,783 9.38 AT400453 ExoSkeleton $ 8,377 9.39 AT408924 PAT 45 in. Brush Guard $ 1,510 9.4 AT408925 Trash Rack for 128 in. Semi U Blade $ 2,772 9.41 AT408926 Chip Rack for 128 in. Semi U Blade $ 3,072 9.42 AT408927 Chip Rack for 140 in. Semi U Blade $ 3,140 9.43 AT408928 Chip Rack for 152 in. Semi U Blade $ 3,140 9.44 AT409506 Spill Guard for Semi U Blades $ 2,247 9.45 AT409507 Chip Rack $ 1,974 9.46 AT412605 Rear Screen, Cab $ 1,867
7 of 9 10.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc. (Specify years, miles or hours extended term covers.) 10.01 Price: 10.02 Price: $ $
8 of 9 10.03 Price: 11.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS No Flat Rate Allowed 11.01 DELIVERY STARTING POINT - City, State, Zip RDO - Burnsville, MN 55337 11.02 DELIVERY STARTING POINT - City, State, Zip RDO - Grand Forks, ND 58203 11.03 DELIVERY STARTING POINT - City, State, Zip RDO - Marshall, MN 56258 11.04 DELIVERY STARTING POINT - City, State, Zip RDO - Moorhead, MN 56560 11.05 DELIVERY STARTING POINT - City, State, Zip RDO - North Mankato, MN 56003 11.06 DELIVERY STARTING POINT - City, State, Zip RDO - Rochester, MN 55901 11.07 DELIVERY STARTING POINT - City, State, Zip RDO - Sauk Rapids, MN 56379 11.08 DELIVERY STARTING POINT - City, State, Zip Nortrax - Bemidji, MN 56601 11.09 DELIVERY STARTING POINT - City, State, Zip Nortrax - Duluth, MN 55811 11.1 DELIVERY STARTING POINT - City, State, Zip Nortrax - Grand Rapids, MN 55744 11.11 PRICE PER LOADED MILE: $ 5.00 11.12 Minimum Delivery Charge: $ 300.00 12.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. 12.01 Hourly Rental Rate: N/A 12.02 Weekly Rental Rate: $ 3,285 12.03 Monthly Rental Rate: $ 9,850 12.04 Percent (%) of Rental Fee applied to purchase price: 85% 12.1 If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, 12.05 state the actual interest rate here: N/A $ 13.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. 13.01 DEDUCT cost per Used Hour from the original Contract Price $ 56.00 14.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS N/A % Discount AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number N/A
9 of 9