Surface drill rig for quarrying and construction Hole diameter: 76 127 ( (3" 5") 1
Power built in The gives you high reliability and power worthy its name. Thanks to its compact structure and high manoeuvrability, the is perfect for the construction sites, as well as aggregate, cement and limestone quarries. Due to the modular and straightforward design, the service is simple, requiring no special tools when the operator conducts regular maintenance. The ruggedness gives you a workhorse with high reliability. Main benefits Power built in thanks to the RD 22S rock drill & FAD 175 l/s Atlas Copco air compressor Maintainability with two side maintenance doors as well as robust & simplified rock drill High mobility and 发涩 fast positioning with compact machine size and extendable boom system 2 3
R 饿啊的有 eady to drill The surface drill rig has a low number of components due to a modular and straightforward design. This allows for easy maintenance and a drill rig that is ready to drill. Main components Track frames with single or triple grouser pads, hydraulic track oscillation and two speed traction Cuins turbo charged diesel engine, QSB6.7, Tier 3/ Stage III, QSB6,7 Tier 4 Final/Stage IV Screw type compressor Cabin, ROPS and FOPS approved Extendable boom system Carousel type rod handling system: 6 rods (3,66 m) in the carousel and 1 starter rod (4,2 m) on the feed beam (standard feed). 3 rods (3,66 m) in the carousel and 1 starter rod (6,1 m) on the feed beam (long feed) Hydraulic rock drill Dust collector system + Simplicity for reliability is straightforward and reliable thanks to the well-proven hydraulic pilot control system. Its easy-to-understand concept enables you to learn how to operate the machine in no time. The maintenance is service-friendly with a low number of components and electrical parts. + ong service interval and low maintenance The is equipped with an Epiroc RD 22S rock drill with single dampening system to increase the life of drill accessories. This new rock drill gives you just the amount of power you need. The rock drill has long service intervals and low maintenance cost for ease of ownership. + Ergonomic design and high serviceability The ergonomically designed operator cabin gives the operator full visibility during the drilling process, and great comfort for improved working efficiency. Easy access to vital service points means that the is easy to maintain and service. For quick troubleshooting, all hoses are clearly marked to match the schematic drawings in the spare parts lists. Engine Cuins turbo charged, diesel engine QSB6.7, Tier 3/Stage IIIA Compressor Power rating at 2 200 rpm 194 kw 260 hp Cuins turbo charged, diesel engine QSB6.7, Tier 4 Final/Stage IV Power rating at 2 200 rpm 194 kw 260 hp Screw type air compressor Working pressure, max 9.8 bar 140 psi FAD, at normal working pressure 175 l/s 370 cfm Hydraulic system Hydraulic oil cooler Max ambient temperature 52 C 125 F Feed Hydraulic motor feed with hose reel and dust hood Feed extension 1 500 59" Feed rate, max 0.7 m/s 132 ft/min Feed force, max 19.6 kn 4 406 lbf Tractive pull, max 19.6 kn 4 406 lbf Total length 7 660 301.6" Travel length 4 360 171.7" : Volumes Hydraulic oil tank 200 l 53 gal Hydraulic system, total 250 l 66 gal Compressor oil 42 l 11 gal Diesel engine oil 19 l 5 gal Diesel engine, cooling water 35 l 9.2 gal Diesel engine, fuel tank 480 l 127 gal Traction gear 2.5 l 0.66 gal ubrication tank(ec) 0.66 l 0.17 gal Electrical system Dust collector Voltage 24 V Batteries 2 x 12 V, 96 Ah Filter area 23 m 2 248 sq.ft Alternator 24 V, 70 A Number of filter elements 10 pcs 10 pcs A comprehensive service offering Work lights, front Work lights, rear Reverse alarm 4 x 70 W 1 x 70 W Cleaning air pressure, max 4.0 bar 58 psi Cleaning air consumption 15 l/pulse 0.5 cu.ft/pulse Suction hose diameter 150 5.9" Suction capacity at Aq 467 l/s 989 gal/s Even the best equipment needs to be serviced regularly to make sure it sustains peak performance. An Epiroc service solution offers peace of mind, maximizing availability and performance throughout the lifetime of your equipment. We focus on safety, productivity and reliability. By combining genuine parts and an Epiroc service from our certified technicians, we safeguard your productivity wherever you are. Hydraulic rock drill Rock drill Impact power Hydraulic pressure Impact rate Max torque Weight approx RD 22S 22 kw (29.5 hp) 200 bar (2 900 psi) 38 Hz 1 512 Nm (1 115 lbf-ft) 230 kg (507 lb) Hole range (recoended) Type of drilling Drill steel type Drilling diameter Max hole depth Drill steel length Standard feed, T51 76-127 (3-5") 25 m (82') 3 660 (12') x 6 ong feed, T51 76-127 (3-5") 16.5 m (54') 3 660 (12') x 3 4 5
One-lever semi-automatic control for easy and clear rod handling operation. Comfortable operating environment with ROPS/FOPS protection and equipped with easy hydraulic pilot drill control joysticks. 3 4 107 H Hydraulic smooth drilling system including antijaing and drill pressure control function increase the life of drill accessories. FEED DUMP ANGE High-volume air-compressor matches the high productivity of RD 22S rock drill. HORIZONTA REACH () 3 168 5 102 630 TRANSPORTATION DIMENSIONS FEED ength () DUMP ANGE FEED HEIGHT 3 10 000 10 11 32 10 Horizontal reach () HORIZONTA REACH () Minimum toe-hole height () 7 935 26 TOE HOE DRIING V Transport dimensions 3 300 130" ength () 10 000 393.7" Width 2 360 92.9" Feed height () 7 935 312.4" Weight 14 500 kg 2 360 2 830 31 967 Ib 1 511 FEED DUMP ANGE 4 107 HORIZONTA REACH () 700 Feed swing angle FEED SWING ANGE, EFT AND RIGHT FRONT FACE HORIZONTA COVERAGE AREA () 3 842 HH 2 2 788 3 322 168 33168 FRONT FACE HORIZONTA COVERAGE AREA () 102 55102 630 4 074 FEED SWING ANGE, EFT AND RIGHT 4 284 TRANSPORTATION TRANSPORTATIONDIMENSIONS Selection of optionsdimensions TOE HOE DRIING FEED HEIGHT HEIGHT FEED 10 11 11 (H)(H) systems 33 10 Hole measuring ength () 10000 000 32 10 10 ength () 32 2D angle indicator - TRANSTRONIC HQS 10 3D angle indicator with speed and depth - TRANSTRONIC HQS (H) Dust control Dust pre-separator 26 26 360 22 360 830 22 830 1 Parts and services Extra spare parts book Central lubrication system Adjustments for drilling Percussion pressure control system Rotation speed control system Water mist system Water mist system (exclusive tank) Water mist system ASME tank Rod handling system RHS x 12 x 6 for 63 coupling RHS x 12 x 6 for 66 coupling 070 Conversion kit T51/72 2sleeve to 77 sleeve 7 7935 935 Delivered equipment, not mounted Gas charging equipment (for rock drill) Hydraulic pressure test kit Vertical reach () VERTICA REACH () Track Track chain with single grouser pads (only available for CE) 2 Safety Reverse camera ED lamp kit Flashlight kit 6 2 FRONT FACE HORIZONTA COVERAGE AREAarea ()() Front face horizontal coverage FEED SWING ANGE, EFT AND RIGHT Feed dump angle FEED DUMP ANGE HORIZONT 7
9868 0021 01, 2018-02 Yokohama, Japan. egal Notice Copyright 2018, Epiroc Japan KK, Yokohama, Japan. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and coitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com 8