RADIAL ALUMINUM LOW PRESSURE Content LOW PRESSURE BLOWERS... 2 GENERAL... 3 D03M, E03... 4 D04M, E04... 5 D045M, E045... 6 D05M, E05... 7 D052M, E052... 8 D060, E060... 9 D064, E064... 10 D066, E066... 11 D07, D072... 12 D08, D082... 13 D09, D092... 14 Blowers in twin models.... 15 2D04... 16 2D045... 17 2D05... 18 2D052... 19 2D060... 20 2D064... 21 2D066... 22 2D07... 23 2D08.... 24 ACCESSORIES... 25 1
LOW PRESSURE BLOWERS Feature of this direct drive blowers is the aluminum housing with radial impeller wide forward curved blades. With a stocky build this ensures particularly quiet operation. The suction side is provided with a protective netting, there may possibly be a suction inlet to be mounted. We can also supply an extensive range of accessories. All fans are available in 8 positions, would like before ordering to make a choice in clockwise or counterclockwise rotation, the position of the snail shell can be decide for yourself. The motor can be mounted both horizontally and vertically. The blowers are in standard version for temperatures up to 50 C, for temperatures up to 180 C can be a hot soak clutch built, suitable type S484. The motors IP54 equipped with a voltage of 230 volts or 230/400 volts to 3 kw., Above 400/690 Volt. The default frequency is 50 Hz., Other voltages and 60 Hz. are also possible. The motors above 0,75 kw are IE3. The blowers can also be supplied with an electronically controlled engine, this concerns the types RVE. If there is dirt on the media, we recommend a filter. For suction operation of the blower should be 80% of the fan capacity take. The sound data obtained by measurement with an open suction inlet at 1 meter. All blowers are suitable for continuous operation. The impeller and the snail shells can be supplied in stainless steel. 2
GENERAL Clockwise Counter Clockwise All blowers can be supplied in various positions according to the above pictures. As standard we deliver the right (clockwise) model AR. If you want a left version (counter clockwise) and the base is molded, it must be in advance indicate this. With a removable base the snail shall can be turned, but one must then assemble a left impeller. When a channel on the discharge side connection of the same diameter as the blower mouth then P-dyn.2 as pressure drop indicated. If a larger channel mounted then, the dynamic pressure is considerable smaller and can be used as static pressure. At 100% bigger will win about 55% back. Suction side does not affect because of diffusion effects. Total pressure Blower characteristic B Capacities B pressure profit at increasing blow channel P dyn. 2 Characteristic A 3
D03M, E03 S484 version total length 227 mm. Max. Airflow Max. Pressure Voltage Frequency Max. Motor current Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D03M 3,2 330 D03M 3,8 480 208-265/ 360-460 208-290/ 360-500 50 60 0,36-0,68/ 0,21-0,36 0,33-0,55/ 0,19-0,28 2820 0,03-4,2 3400 0,05-4,2 E03 3,2 330 230 50 0,40 2880 0,03 3/450 3,9 E03 3,8 480 230 60 0,50 3350 0,05 3/450 3,9 50 HZ 60 HZ 4
D04M, E04 S484 version total length 239,5 mm. Max. Max. Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D04M 5,0 350 D04M 6,0 500 208-265/ 360-460 208-290/ 360-500 50 60 0,45-0,72/ 0,26-0,42 0,47-0,52/ 0,27-0,30 2850 0,07-4,5 3400 0,12-4,5 E04 5,0 350 230 50 0,80 2850 0,07 3/450 4,7 E04 6,0 500 230 60 0,75 3400 0,12 3/450 4,7 5
D045M, E045 S484 version total length 263 mm. Max. Max. Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D045M 7,90 450 208-265/ 360-460 50 0,50/0,29 2690 0,10-4,7 D045M 9,50 600 208-290/ 360-500 60 0,66/0,38 3110 0,17-4,7 E045 7,90 450 230 50 0,90 2690 0,10 3/450 4,9 E045 9,50 600 230 60 0,85 3110 0,17 3/450 4,9 6
D05M, E05 S484 version total length 266 mm. Max. Max. Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D05M 10,5 430 208-265/ 360-460 50 0,59/0,34 2550 0,13-5,0 D05M 11,0 620 208-290/ 360-500 60 0,74/0,43 3000 0,19-5,0 E05 10,5 430 230 50 1,1 2550 0,14 3/450 5,2 E05 9,5 620 230 60 0,9 3300 0,14 3/450 5,2 7
D052M, E052 S484 version total length 371 mm. Max. Airflow Max. Pressure Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D052M 15,0 530 D052M 18,0 760 208-265/ 360-460 208-290/ 360-500 50 60 1,25-2,15/ 0,72-1,24 1,73-1,91/ 1,00-1,10 2840 0,37-7,6 3350 0,44-7,6 E052 13,5 530 230 50 1,8 2805 0,37 10/450 6,4 E052 12,5 760 230 60 2,2 3365 0,44 8/450 6,4 8
D060, E060 S484 version total length 387 mm. Max. Max. Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D060 22,0 730 230-400 50 2,50-1,45 2840 0,55-12,0 D060 24,5 1040 230-400 60 3,55-2,05 3340 0,90-12,0 E060 22,0 730 230 50 3,6 2820 0,55 16/450 11,0 E060 22,5 1040 230 60 5,0 3360 0,75 16/450 11,0 9
D064, E064 S484 version total length 403 mm. Max. Max. Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D064 27 1050 230-400 50 4,00-2,30 2800 1,10-15,0 D064 32 1550 230-400 60 4,45-2,60 3300 1,32-15,0 E064 28 1000 230 50 6,7 2800 1,10 30/450 17,0 E064 26 1500 230 60 6,7 3360 1,10 30/450 17,0 10
D066, E066 S484 version total length 443 mm. Max. Max. Voltage Frequency Max. Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D066 38 1200 230/400 50 5,55/3,20 2870 1,5-19,0 D066 38 1300 230/400 60 5,45/3,15 3465 1,8-19,0 E066 36 1200 230 50 9,5 2880 1,5 30/450 18,0 E066 37 1380 230 60 9,5 3455 1,5 30/450 18,0 11
D07, D072 S484 version total length + 28 mm. Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. D07 41 1200 230/400 50 7,50/4,34 2870 2,20 25 D07 41 1600 230/400 60 9,20/5,30 3480 2,65 25 D072 52 1200 230/400 50 10,4/6,00 2890 3,00 27 D072 52 1600 230/400 60 12,6/7,30 3500 3,60 27 12
D08, D082 S484 version total length + 28 mm. Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. D08 50 1700 230/400 50 7,50/4,35 2870 2,2 30 D08 42 2300 230/400 60 9,20/5,30 3480 3,6 30 D082 60 1700 230/400 50 10,4/6,00 2890 3,0 33 D082 53 2300 230/400 60 12,6/7,30 3500 3,6 33 13
D09, D092 S484 version total length + 28 mm. Motor A D09 132 SX 605 D092 132 SL 640 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. D09 80 1900 400 50 10,5 2940 5,5 66 D09 80 2700 400 60 12,4 3540 6,6 66 D092 95 1900 400 50 13,4 2935 7,5 71 D092 91 2700 400 60 16,1 3530 9,0 71 14
Blowers in twin models. A number of low pressure blowers can be supplied in a twin version, called 2D version. All the characteristics of these blowers are equal to the low-pressure blowers. The motor is placed in the center and has additional cooling fins because the cooling fan is missing and is over dimensioned. The advantage is that you can connect two pipes separately or if it is necessary parallel linking, while only one arrangement is required. 15
2D04 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D04 10 350 230/400 50 1,04/0,60 2900 0,14 6,7 2D04 12 500 277/480 60 1,13/0,65 3450 0,24 6,7 16
2D045 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D045 17 450 230/400 50 1,63/0,94 2855 0,24 8,7 2D045 20 660 277/480 60 1,73/1,00 3320 0,30 8,7 17
2D05 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D05 21 430 230/400 50 1,90/1,10 2770 0,35 8,4 2D05 24 620 277/480 60 2,15/1,25 3200 0,55 8,4 18
2D052 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D052 30 530 230/400 50 2,6/1,5 2850 0,56 11,0 2D052 30 760 277/480 60 2,6/1,5 3420 0,70 11,0 19
2D060 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D060 50 730 230/400 50 5,55/3,20 2870 1,5 19 2D060 54 1040 277/480 60 5,45/3,05 3465 1,8 19 20
2D064 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D064 60 1000 230/400 50 7,50/4,35 2870 2,2 25 2D064 57 1440 230/400 60 9,20/5,30 3480 2,65 25 21
2D066 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D066 76 1200 400 50 7,9 2935 4,0 39 2D066 76 1300 400 60 9,2 3525 4,8 39 22
2D07 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D07 94 1200 400 50 7,9 2935 4,0 50 2D07 77 1600 400 60 9,2 3525 4,8 50 23
2D08 Max. Max. Voltage Frequency Max. Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg. 2D08 95 1900 400 50 7,9 2935 4,0 52 2D08 72 2500 400 60 9,2 3525 4,8 52 24
ACCESSORIES Control valve. Is mounted on the pressure side. Blow nozzle. Suction nozzle a b d e f h Article nr. D03, E03 72 72 7 56 56 23 000035 D04, E04, 2D04 D045, E045, 2D045 D05, E05, 2D05 D052, E052, 2D052 D060, E060, 2D060 D064, E064, 2D064 D066, E066, 2D066 76 76 7 64 64 23 000095 112 98 7 95 80 20 016769 112 112 9 96 96 23 000036 130 130 7 105 115 23 000264 140 140 9 115 115 23 001350 150 130 9 130 110 23 000093 155 155 9 130 130 23 001129 D07, D072, 2D07 190 210 11 160 180 23 000094 D08, D082, 2D08 190 190 11 165 165 23 000106 D09,D092 220 220 11 196 196 23 000490 a b d1 d2 d3 e f h1 h2 Article nr. D03, E03 72 72 7 52 60 56 56 70 5 000044 D04, E04, 2D04 80 80 7 60 70 64 64 70 6 000045 D045, E045, 2D045 98 112 7 76 80 80 95 85 2 009594 D05, E05, 2D05 112 112 9 86 96 96 96 100 8 000046 D052, E052, 2D052 130 130 7 92 99 105 115 100 8 000273 D060, E060, 2D060 140 140 9 110 120 115 115 100 10 001351 D064, E064, 2D064 150 130 9 104 114 130 110 100 12 000123 D066, E066, 2D066 155 155 9 125 135 130 130 100 12 001144 D07, D072, 2D07 190 210 11 150 160 160 180 120 12 000048 D08, D082, 2D08 190 190 11 155 165 165 165 100 12 000124 D09, D092 220 220 11 170 180 196 196 140 15 000489 d1 d2 d3 d4 d5 h1 h2 Articl nr. D03, E03 100 120 131 90,5 4x5,8 100 6 000713 D04, E04, 2D04 120 140 151 110,5 4x5,8 100 6 000714 D045, E045, 2D045 120 144 156 116 4x5 100 2 000715 D05, E05, 2D05 130 147 160 119,5 4x5,8 100 6 000715 D052, E052, 2D052 151 171 180 140 4x5,8 100 6 000254 D060, E060, 2D060 150 176 188 140 4x5,8 120 6 000716 D064, E064, 2D064 160 198 210 149,5 4x5,8 140 6 000717 D066, E066, 2D066 190 238 252 179 4x7 160 10 000718 D07, D072, 2D07 190 238 252 179 4x7 160 10 000718 D08, D082, 2D08 220 256 272 208 4x7 160 10 000719 D09, D092 250 290 310 234 8x7 180 10 000488 bosaventilatoren bv 25
Fine dust filter. Is mounted on the suction side. d1 d2 d3 d5 e h1 h2 Article nr. D03, E03 95 120 148 4x6-111 153 009098 D04, E04, 2D04 120 140 210 4x6-111 153 009116 D045, E045, 2D045 130 144 210 4x5 25 151 193 009596 D05, E05, 2D05 120 147 210 4x6-216 258 009117 D052, E052, 2D052 130 171 210 4x6 10 216 258 009118 D060, E060, 2D060 130 176 260 4x5,5-241 293 009119 D064, E064, 2D064 150 198 260 4x6-345 397 009120 D066, E066, 2D066 222 238 315 4x7 24 449 501 009122 D07, D072, 2D07 222 238 315 4x7 24 449 501 009122 D08, D082, 2D08 240 256 410 4x7 38 449 501 009123 D09, D092 270 290 410 8x7-657 709 009307 Att:. Dirty filters reduce greatly the blower capacity. Regularly check the filter! Replace filter matting. For fine dust filter. Blower Article nr. D03, E03 15x120x425 008636 D04, E04, 2D04 15x120x620 008598 D045, E045, 2D045 15x160x620 008599 D05, E05, 2D05 15x225x620 008600 D052, E052, 2D052 15x225x620 008600 D060, E060, 2D060 15x250x750 008604 D064, E064, 2D064 15x355x750 008605 D066, E066, 2D066 15x460x960 008607 D07, D072, 2D07 15x460x960 008607 D08, D082, 2D08 15x460x1180 008612 D09, D092 15x665x1220 008613 bosaventilatoren bv 26