Tel. +39 075.5280260 Fax +39 075.5287033 Via Pizzoni 37/39 06132 Perugia ITALY www.umbrarimorchi.it umbrarimorchi@umbrarimorchi.it ISTRUZIONI DI MONTAGGIO FITTING INSTRUCTIONS INSTRUCTIONS DE MONTAGE MONTAGEANLEITUNG INSTRUCCIONES DE MONTAJE DISPOSITIVO DI TRAINO TIPO TOWING BRACKET TYPE DISPOTIF DE REMORQUAGE TYPE ANHAENGEVORRICHTUNG TYP DISPOSITIVO DE CAREO TIPO FORD FOCUS C-MAX, GRAND C-MAX, FORD FOCUS 3-5 Doors ( also for restyling 2011) - NOT FOR SALOON VERSION - PER AUTOVEICOLI FOR CARS POUR AUTOS FUR KRAFTAHRZEUGE PARA AUTOVEHICUL TYPE CLASSE E TIPO DI ATTACCO CLASS AND HITCH TYPE CLASSE ET TYPE DE CROCHET KLASSE UND BEFESTIGUNGSART CLASES DE ACOPLAMIENTO F DM2, DXA, DA3, DYB C-MAX /GRAND C-MAX:2003 => 3-5 doors: 2005 => OMOLOGAZIONE CARICO VERTICALE MAX HOMOLOGATION HOMOLOGATION ZULASSUNG APROBACION S VALUE MASSE VERTICALE MAXIMUM ZUL. STUETZLAST CARGA MAX. VERTICAL e3 00 7157 (DIR. 94/20/CE) S = kg 100 ALORE D D VALUE VALEUR D D WERT VALOR D 9,3 kn D = 9.3 kn COPPIA DI SERRAGGIO PER VITI (8.8): TORQUE SETTINGS FOR NUTS AND BOLTS (8.8): COUPLE DE SERRAGE POUR VIS (8.8): SCHRAUBENANZUGSMOMENT (8.8): MOM. DE PRESION PARA TORNILLOS Y TUERCAS (8.8): M6 = 10 Nm M10 = 55 Nm M14 = 135 Nm M8 = 25 Nm M12 = 85 Nm M16 = 200 Nm P. 1 / 7
SAFETY INSTRUCTIONS Make sure that the towbar is suitable for the vehicle before starting the installation For safety, all work involving towbar installation (incl. electrical components) must be undertaken by skilled technicians. Damaged components must be replaced with manufacturer s spares and fitted by qualified staff It is forbidden to make any modification or structural repair to towing assembly The tow-ball must be kept clean and lubricated. For added safety, his diameter (50 mm) must be checked at regular intervals. If the tow-ball measures less than 49 mm after selected readings across the diameter, the tow-ball must be replaced with a new one After 1000 km of towing, check torque settings for nuts and bolts, in accordance with the table Umbra Rimorchi cannot be held responsible for any defects in the product caused by fault or by any injudicious use whatever of the user or a person he is liable for. P. 2 / 7
FITTING INSTRUCTIONS FORD FOCUS 2 HATCHBACK (2003-2011) FORD FOCUS 3 2 HATCHBACK 2011 FORD C-MAX FORD GRAND C-MAX Remove any mastic from contact points and paint with anti rust paint. 1. Just for Focus 3 2011> Hatchback: remove the lights and the casing under the flatcar 2. Remove the bumper and discard the bumper beam. 3. Insert side arms A inside the chassis rails and fit referring to screws 1. 4. Just for C-Max '10 and Grand C-Max '10: if present remove the antenna of the parking sensors which is on the central wall of the body shell and locate it behind the same support drilling out two new holes dimensions 06. 5. Locate cross bar B referring to holes 2 and 3 and tighten. 6. Caution: Just for Focus 3 2011> Hatchback, locate item B on the rearward holes as showed. 7. Tighten all bolts and nuts as per torque settings 8. Connect the wirings to the socket 9. Just for Focus C-Max '03-'10 and Focus 2 3&5 doors: cut the bumper as showed (little cut) 10.Just for Focus 3 2011> Hatchback: cut bumper and casing as showed in attachment 1. 11. Connect the socket support to its support based on the type of vehicle in which the tow bar is mounted (see sketch) 12. Re-fit bumper. 13. Just for Focus 3 2011> Hatchback volumes: re-fit the casing and the lights. DISAPPEARING ELECTRICAL SOCKET P. 3 / 7
P. 4 / 7
P. 5 / 7
P. 6 / 7
P. 7 / 7