Sole Distributor and Agents in India for :

Correspondence Address: 1017, Adarsh Nagar, New Link Road, Opp. Oriental College, Oshiwara, Andheri(W). Mumbai-400 102. Tel : 022-26741904 / 6692 4175 / 6697 5447 / 6573 8689 / 6574 7931. Fax : 022-67103445 E-mail : vinod@dynamicmarketing.in / manish@dynamicmarketing.in Web-site : www.dynamicmarketing.in Sole Distributor and Agents in India for :

MOTOR + FAN BLADE PAIRING (COUPLING) & Technical Details For Aluminium Blade Part No. Motors (In Watts) (In HP) Blade Dia + Pitch (Inch) Watt In Watt Out Air Flow Cm 3 h Static Pressure mm H 2 O Motor N 05-13 / 100 Motor N 10-20 / 107 Motor N 16-30 / 013 Motor N 25-40 / 481 Motor N 34-45 / 014 For Plastic Blade Part No. Motors (In Watts) (In HP) Motor N 05-13 / 100 Motor N 10-20 / 107 Motor N 16-30 / 013 154-28 5 Watts (6 ) (1/110 HP) 172-28 (7 ) 200-28 10 Watts (8 ) (1/83 HP) 230-28 (9 ) 254-28 16 Watts (10 ) (1/35 HP) 300-22 (12 ) 254-28 25 Watts (10 ) (1/20 HP) 300-28 (12 ) 34 Watts 300 34 (1/10 HP) (12 ) Blade Dia + Pitch (Inch) 154-28 (6 ) 5 Watts (1/110 HP) 200-28 (8 ) 200-28 10 Watts (8 ) (1/83 HP) 230-28 (9 ) 16 Watts (1/35 HP) 254-28 (10 ) Watt In 5 32 10 38 16 65 25 95 233 5.0 340 5.2 483 7.2 700 5.0 Current (amp) 0.26 0.35 980 9.0 0.50 1100 8.5 1000 12.0 1500 10.1 0.68 34 120 1700 8.4 0.87 Watt Out 5 32 10 38 Air Flow Cm 3 h Static Pressure mm H 2 O 200 4.8 425 5.0 475 6.5 680 4.2 Current (amp) 0.26 0.35 16 65 925 6.8 0.50 Note : Speed (RPM) for all the motors will be 1300 RPM

-P. 45'014 1 (1110 HP) -1 11 779\ I w, (1,llO myr ~~ - 2" ~'~*~. I'

General Motor Knowledge Motor Sounds Lynn R. Dutro What does a motor sound like? What should a motor sound like? Let's turn one of ours on and listen. AC power in this country alternates 50 times or 50 cycles each second. This is also known as 50 Hz pronounced 50 "hurts". The revolving magnetic field this sets up in our motor changes from north to south each cycle. Each change flexes the magnetic structure of the motor. Two changes for each of the 50 cycles results in 100 flexes of the magnetic structure each second. This is the characteristic 100 Hz "Hum..mm" associated with ac induction motors. The more powerful the motor, the more powerful the "hum..mm". The stator induces this same magnetic field into the rotor. But, the rotor "slips" or lags behind the stator's revolving field. The difference between the rotor speed and the speed of the revolving field results in a "beat" frequency. This is audible as a "wow.wow.wow", changing to a "wow...wow" and finally to a "wow..ww" as the rotor approaches synchronization with the stator field. As the motor comes up to speed, harmonics cause variations in pitch such that the motor sounds like it is changing gears. Our motor is running. So what do we hear? The "hum..mm" from the stator with a very slow and not quite as strong "wow...wow" from the rotor. What else? Wind noise from moving air? What else? The shaft sliding in the bearing? But, with a film of oil in the bearing, this is almost no sound at all. Certainly not like the screech of metal on metal or the grating sound of sandpaper on a table top. Is the retaining washer on straight or do you hear it "tap..tap..tap" on the square nylon thrust washer? Do you hear a "bump..bump..bump" as the hub bounces along on the end of a bearing post that is not smooth and flat? If the end-bump sounds like a "clang..clang..clang", one of the padded washers was left out. Do you hear a "tick..tick..tick" from the rotor striking something in the air gap? Or a scratching sound like everything was turning in a bucket of sand? Does the rotor run smooth and free? Or can you hear and feel it as the out-of-balance weight is thrown from side to side? Do you hear a rattle from a loose mounting screw? If the metal fan blade is loose, it will ring like a gong. A happy motor should "hum..mm" merrily along. If it sounds like a wreck, it is asking for your help.

General Motor Knowledge Motor Performance Curves Lynn R. Dutro A motor performance curve is a picture showing the relationship between inputs and outputs. Let's choose motor speed in revolutions per minute (RPM) as a reference point and look at torque. Torque is a measure of the force a motor can develope to turn something. Begin in the lower left corner of the picture. Draw a line of increasing speed up the page. This line begins at 0 RPM and extends to the synchronous or maximum speed, 1,500 1 RPM for a 4-pole motor (at 50Hz, 1.800 at 60Hz). If the motor is not energized and RPM is zero, torque is also equal to zero. The lower left corner of our picture becomes RPM = 0 and TORQUE = 0. Speed increases up the page so we will choose torque increasing across the page to the right. Turn the motor on. Torque is developed in the rotor but the rotor has not started to turn yet. "Starting" torque is available to start the rotor turning and to accelerate it up to some operating speed. As speed increases, torque is affected by the various harmonics. Most noteable is the third harmonic. This harmonic is centered at one third the synchronous speed or 500 2 RPM. It's negative most effect is seen as a dip in torque at about 700 3 RPM. This is the infamous "third harmonic dip". Torque will continue to increase as speed increases until a speed of maximum torque is reached. This is often refered to as "breakdown' torque. From this point upward as speed increases torque will decrease. At synchronous speed, torque will equal to zero. The most desireable operating speeds are between synchronous and breakdown. If the motor load is greater than breakdown torque, the rotor stops turning because no more torque can be developed. 1 60 f 2 The sincronism RPM is defined as the maximum theoretical speed of a motor: RPM = - f= frequency; p=number of poles p 2 These numbers have to be considered as examples only 3 These numbers have to be considered as examples only

General Motor Knowledge Motor/Fan Performance Lynn R. Dutro Speed starts at 0 RPM in the lower left corner and increases up the page. Torque starts at 0, at the same place on the page as speed. Torque increases to the right across the page. The moment power is applied to the motor, RPM is still 0, while the motor develops some torque to start the rotor turning. This accelerates the rotor and speed increases. Torque and speed continue to increase with speed until torque reaches some maximum value. From this point, torque decreases as the rotor begins to revolve at the same speed as the magnetic field producing it. A fan blade requires torque in an amount proportional to the square of the speed. The speed-torque requirements for three fan blades are shown drawn on top of the motor speed-torque curve. The motor fan combination will operate where these curves intersect. Here the motor speed-torque fulfills the speed and torque requirement of the fan blade. A light fan requires very little from the motor. It operates at or near the motor maximum speed and does not utilize the motor's maximum power output. A heavy fan may not allow the motor to develop its full potential or come up to speed. The medium fan is the better choice. Think of the fan blade petal as a shovel. A child can move dirt with a small spade. An adult may take the same spade and dig faster but not move very much more dirt than did the child. Give the adult a shovel and scoop for scoop more dirt will be moved than with the small spade. If the shovel is so large that the adult must dig slowly, resting between scoops, it is again likely that not much dirt will be moved. It is also likely that the adult will overheat and quit. The motor and fan blade should be matched for best efficiency. This is easily done by overlaying the speedtorque curves of the motor and fan blade.

General Motor Knowledge Motor Performance Lynn R. Dutro Remember our motor speed-torque curve. Speed starts at 0 RPM in the lower left corner and increases up the page. Torque starts at 0, at the same place and increases to the right across the page. Remember also, a fan blade requires torque in an amount proportional to the square of the speed. The speed-torque requirements for three fan blades are shown drawn on top of the motor speedtorque curve. The motor fan combination will operate where the fan curve crosses the motor curve. A light fan requires very little from the motor. A heavy fan may not allow the motor to develop its full potential. We decided that a medium fan is the best choice. Let's see why. At any point along the motor speed-torque curve, torque multiplied times the speed, multiplied times a conversion number to get the units right is equal to WATTS OUTPUT. WATTS OUTPUT divided by the WATTS INPUT then times 100% is equal to the PERCENT EFFICIENCY. I have done the arithmetic and calculated a percent (%) efficiency curve for our motor performance curve. Percent efficiency starts at 0 in the lower left corner and increases to the right just as we did for torque. Note the speed where the medium fan curve and the motor performance curve cross. I have drawn a dotted line through this point. The motor efficiency at this speed (continue along the dotted line until it crosses the % efficiency curve) is very nearly maximum. At this point we are getting the MOST out of our motor/fan combination for the LEAST amount of power input. By following a similar process you can see that both the light fan and heavy fan will cause the motor to operate at a point of lower efficiency. This kind of graphical analysis is used to aid our customers in selecting desirable motor/fan combinations.

CANADA SUBSIDIARY U.K. SUBSIDIARY CHINA SUBSIDIARY ELCO S.p.A. VIA MARCONI, 1 20065 INZAGO MILANO ITALIA PHONE +39 02 95319.1 FAX +39 02 95310138 E-mail: info@elco-spa.com www.elco-spa.com ELCO MOTORS INC. 275 LIBERTE CANDIAC QC J5R 3X8 - CANADA PHONE +1 450 633 1515 FAX +1 450 633 0851 E-mail: sales@elcomotors.com ELCO DIRECT LIMITED UNIT A4, LAKE ENTERPRISE PARK, BIRKDALE RD, SOUTH PARK IND. ESTATE, BOTTESFORD, SCUNTHORPE, NORTH LINCOLNSHIRE, DN17 2AU - U.K. PHONE +44 1724 859900 FAX +44 1724 859922 E-mail: sales@elcodirect.co.uk ELCO CHINA LIMITED HONG KONG DONGGUAN HENGLI ELCO CHINA MOTOR FACTORY XINCHENG INDUSTRIAL ZONE, HENGLI, GUANGDONG PROVINCE, PRC PHONE +86 769 3727378 FAX +86 769 3727379 E-mail: simon.eldar@elcochina.com U.S.A. SUBSIDIARY SPAIN SUBSIDIARY SINGAPORE SUBSIDIARY ELCO AMERICA INC. P.O. BOX 458 147 W MICHIGAN AVE. CLINTON MI 49236-0458 USA PHONE +1 517 456 9690 FAX +1 517 456 9689 E-mail: elcoamerica@tc3net.com ELCO MOTORES ESPAÑA SA CALLE C, PARCELA 6, NAVE 2 POL. INDUSTRIAL EL OLIVERAL 46190 RIBARROJA - VALENCIA ESPAÑA PHONE +34 96 1666346 FAX +34 96 1666087 E-mail: elco@elco-motores.es ELCO MOTORS ASIA PTE LTD 22 KALLANG AVENUE #07-06 HONG AIK INDUSTRIAL BUILDING SINGAPORE 339413 PHONE +65 6298 9169 FAX +65 6291 6520 E-mail: elcoasia@singnet.com.sg BRASIL SUBSIDIARY U.A.E. SUBSIDIARY AUSTRALIA SUBSIDIARY ELCO DO BRASIL LTDA RUA MARCELO MORAES CORDEIRO, 190 CEP 06765-280 TABOÃO DA SERRA - SP - BRASIL PHONE +55 11 47878029 FAX +55 11 47873106 E-mail: elcobra@uol.com.br ELCO MOTORS LIMITED JEBEL ALI FREE ZONE AREA P.O. BOX 18358, DUBAI - U.A.E. PHONE +971 (04) 8873330 FAX +971 (04) 8873331 E-mail: sales@elcomotors.ae ELCO MOTORS AND FANS PTY LTD 84 NORTHGATE DRIVE THOMASTOWN VIC 3074 - AUSTRALIA PHONE +61 3 9464 2066 FAX +61 3 9464 2077 E-mail: sales@elcomotors.com.au

ITALIA GERMANY PORTUGAL COLOMBIA AGENT RIVACOLD SRL VIA XXV APRILE, 60 61020 MONTECCHIO (PS) - ITALIA PHONE +39 0721 499308 FAX +39 0721 490015 www.rivacold.com GOVI GmbH CHRISTIAN-LASSEN-STRAßE 10b D-53117 BONN - GERMANY PHONE +49 0228 62932-60 FAX +49 0228 62932-61 E-mail: info@govi-gmbh.de www.govi-gmbh.de SKK RUA MONTE DOS PIPOS, ARMAZÉM 6 4460-059 GUIFÕES - PORTUGAL PHONE +351 22 9571100 FAX +351 22 9571137 E-mail: paulocosta@skk.pt ELCO COLOMBIA LTDA CALLE 22 N 127-21 (FONTIBON) BOGOTÀ D.C. - COLOMBIA PHONE +57 1 2988030 FAX +57 1 4182525 E-mail: elcocolombia@etb.net.co AUSTRIA GERMANY ROMANIA ECUADOR SOJKA GmbH & CO. KG. KLANGGASSE 2A A-1021 WIEN 2 - ÖSTERREICH PHONE +43 1 2163060 FAX +43 1 2163697 E-mail: verkauf@sojka.at ROBERT SCHIESSL KOLPINGRING 14 82041 OBERHACHING - GERMANY PHONE +49 89 613060 FAX +49 89 61306171 MIDAL 111A, PANTELIMON RD 73384 BUCHAREST - ROMANIA PHONE +40 1 2504757 FAX +40 1 2507075 SEIMALSA PADRE SOLANO, 223 Y ESCOBEDO, ESQ. 3 PISO, OFC. 1-2 GUAYAQUIL - EQUADOR PHONE +593 4 309124 FAX +593 4 562003 BELGIUM GERMANY RUSSIA MEXICO AGENT FL. HEYNEN RODE LEE UWLAAN, 15 B-2640 MORTSEL - BELGIUM PHONE +32 3 4401900 FAX +32 3 4401027 E-mail: DIDIER@heynen-cool.com BULGARIA REISS REICHERTWEG 1 63015 OFFENBACH MAIN GERMANY PHONE +49 69 84090 FAX +49 69 837239 GREECE AGENT FEAM ORDZHONIKIKIDZE STR. 11 117419 MOSCOW - RUSSIA PHONE / FAX +7 095 9551640 E-mail: feam_co@hotbox.ru RUSSIA SURAMERICANA DE MOTORES S.A.DE C.V. PONIENTE 134 N 682 BODEGA C COL. INDUSTRIAL VALLEJO DEL. AZCAPOTZALCO C.P. 02300 - MEXICO D.F. PHONE +52 5555 870343 FAX +52 5555 870310 E-mail: elcomexico@aol.com SANTO DOMINGO KAMEO Ltd. 178 DUNAV BLUD. SUITE 6 4021 PLOVDIV - BULGARIA FAX +359 32 953875 E-mail: KameoLtd@aol.com A. CORRES AND CO. UNLTD 72 KOSTANTINOUPOLES STR. 18344 MOSCHATO - GREECE PHONE +30 210 4823176 FAX +30 210 4829378 E-mail: corres@acci.gr CPS REFRIGERATION 12, STRELBITSHENSKAYA STR. 192102 ST. PETERSBURG - RUSSIA PHONE +7 812 3255794 FAX +7 812 3255795 E-mail: sales@cpsholod.ru JOHMAR TRADING CO. AVDA. G. WASHINGTON, ESQ. CAMBRONAL, EDIFICIO MELLA, APTO 403 - SANTO DOMINGO PHONE +851 809 6876201 FAX +851 809 6825973 CROATIA HOLLAND SLOVENIJA INDIA MB FRIGO d.o.o. BANI 81 10010 ZAGREB - CROATIA PHONE +385 1 6608002 FAX +385 1 6608004 CENTERCON CYPRESBAAN 32 2908 LT CAPELLE A/D IJSSEL HOLLAND PHONE +31 10 4584455 FAX +31 10 4584748 E-mail: sales@centercon.nl EMPOR d.o.o. LESKOSKOVA 9a LJUBJANAD Z.R. 1000 SLOVENIJA PHONE +386 1520 3820 FAX +386 1520 3838 E-mail: empor@empor.si M/S. DYNAMIC MARKETING A-202, DHAVALGIRI APT., LOKHANDWALA COMPLEX, ANDHERI(W) - MUMBAI - 400053 - INDIA PHONE +91 (022) 2674 1904 / 5697 5447 FAX +91 (022) 5692 4175 E-mail: Vinod@dynamiccommonwealth.com CZECH REPUBLIC HOLLAND SWEDEN AGENT KUWAIT FRIDANAIR s.r.o. UNIVERZITNI C.P. 1071 32012 PLZEN - CZECH REPUBLIC PHONE +420 19 7421144 FAX +420 19 7421584 E-mail: purchase.dept@fridanair.cz ECR COLLSEWEG 26 5674 TR NUENEN - HOLLAND PHONE +31 40 2990600 FAX +31 40 2990699 E-mail: inkoop@nbk.nl NORDICOLD AB DATAVAGEN 16 43632 ASKIM - SWEDEN PHONE +46 31 680440 FAX +46 31 285291 E-mail: pekka.heikkinen@nordicold.se hans.jannemark@nordicold.se AL HASAWI AIRCONDITIONING & REFRIGERATION EQPT. EST. P.O. BOX 1175 SAFAT 13012 KUWAIT PHONE +965 4769100 FAX +965 4720091 E-mail: sales@alhasawi.com DENMARK HUNGARY SWITZERLAND U.A.E. JESSEN JURGENSEN TEMPOVEJ 18-22 02750 BALLERUP - DENMARK PHONE +45 70 270607 FAX +45 70 263405 E-mail: hej@hjj.dk EQUINOXE EXP-IMP TRADING CO. LTD. CZOBOR ST. 10 1147 BUDAPEST - HUNGARY PHONE +36 1 2511488 FAX +36 1 2511376 E-mail: equinoxe@equinoxe.hu H. KOCH KÄLTE AG ZIELSTRASSE 23 POSTFACH 139 APPENZELL 9050 - SCHWEIZ PHONE +41 71 7874733 FAX +41 71 7874734 NASER AL SAYER & CO. L.L.C. P.O. BOX 1825 - DUBAI UNITED ARAB EMIRATES PHONE +971 4 2222471 / 2284314 FAX +971 4 2275803 E-mail: nascomt@emirates.net.ae FINLAND AGENT NORWAY TÜRKIYE AGENT REFAIR OY ATOMITIE 1 - P.O. BOX 52 HELSINKY 00370 - FINLAND PHONE +358 9 5657780 FAX +358 9 56577880 E-mail: info@refair.fi HILLCO STROMSVEIEN 346 1081 OSLO - NORWAY PHONE +47 2317 5280 FAX +47 2317 5281 E-mail: halto@online.no FRIGOTERM TARLABASI CADDESI, 110 BEYOGLU ISTANBUL 80080 TÜRKIYE PHONE +90 212 2501500 FAX +90 212 2550114 E-mail: international@frigoterm.com.tr FRANCE POLAND U.K. SOCIETE D APPAREILLAGES DIVERS S.A. PARC IND. DES 50 ARPENTS 8, SQ. LOUIS BLANC 77680 ROISSY-EN-BRIE - FRANCE PHONE +33 1 60183030 FAX +33 1 60293898 E-mail: sad@sad-sa.fr POL STOWEST SPOLKA Z.O.O. UL.KRZEMIENIECKA 118 WROCLAW 54-613 - POLAND PHONE +48 71 3736 213/211/212 FAX +48 71 3736483 E-mail: info@pol-stowest.com.pl DEAN & WOOD LIMITED MOLE BUSINESS PARK 3 STATION RD LEATHERHEAD, SURREY KT22 7BA - ENGLAND PHONE +44 1372 364292 FAX +44 1372 364296 E-mail: roachec@dean-wood.co.uk WW 09.04.500

Dichiarazione di Conformità CE EC Declaration of Conformity come definito nella Direttiva Bassa Tensione 73/23/CEE e nella Direttiva EMC 89/336/CEE as defined by the Low Voltage Directive 73/23/EEC and the EMC guideline 89/336/EEC Tipo di macchina Type of machinery Motori Elettrici NET4U05NNN201 Electric Motor I prodotti sono sviluppati, progettati e costruiti in conformità alle Direttive Bassa Tensione 73/23/CEE e Direttiva EMC 89/336/CEE sotto la responsabilità di The products are developped, designed and manufactured in accordance with the EC Directives Low Voltage 73/23/EEC and EMC Directive 89/336/EEC, on the own responsability of Azienda ELCO S.p.A. Via Marconi, 1 Company 20065 Inzago (MI) ITALY Sono state seguite le seguenti normative armonizzate: The following harmonized standards are used: EN 60529 (70-1) Gradi di protezione degli involucri (Codici IP). Degrees of protection provided by enclosures (IP code). EN 50081-1 (CEI 110-7) Compatibilità elettromagnetica - Norma generica sull emissione - Parte 1: Ambienti residenziali, commerciali e dell industria leggera. Electromagnetic compatibility - Generic emission standard - Parte 1: Residential, commercial and light industry. EN 60335-1 (61-50) Sicurezza degli apparecchi elettrici d uso domestico e similare parte 1 Norme generali, relativi ai paragrafi 10-11- 13-16-18-21-23-24.1-25-27-29. Safety of household and similar electrical applicances ; part.1 : General requirements (See Declaration of Conformity Directive 73/23/CEE and 89/336/CEE relative at par. 10-11-13-16-18-21-23-24.1-25-27-29. I prodotti indicati non hanno nessun tipo di protezione contro funzionamenti anomali. The listed products are not th. prot. or imp. prot. IEC 34-1 Macchine elettriche rotanti; parte 1 Caratteristiche nominali e di funzionamento Rotating electrical machines; part 1 : ating and performance La conformità alla Direttiva EMC 89/336/CEE é valida se il prodotto è collegato direttamente alla rete elettrica. Se il prodotto è assemblato in un sistema o combinato con altri prodotti, l installatore è responsabile per il rispetto della Direttiva EMC del sistema completo. The compliance with EMC Directive 89/336/EEC is valid if the product is connected directly to the main supply. If the product is integrated in a system or combined with other products the systemmanufacturer is responsible for compliance with EMC for the complete system. Firma/Signature M-AT-044 (Dich_sprot).docdot

Dichiarazione di Conformità CE EC Declaration of Conformity come definito nella Direttiva Bassa Tensione 73/23/CEE e nella Direttiva EMC 89/336/CEE as defined by the Low Voltage Directive 73/23/EEC and the EMC guideline 89/336/EEC Tipo di macchina Type of machinery Motori Elettrici NET4U10NNN201 Electric Motor I prodotti sono sviluppati, progettati e costruiti in conformità alle Direttive Bassa Tensione 73/23/CEE e Direttiva EMC 89/336/CEE sotto la responsabilità di The products are developped, designed and manufactured in accordance with the EC Directives Low Voltage 73/23/EEC and EMC Directive 89/336/EEC, on the own responsability of Azienda ELCO S.p.A. Via Marconi, 1 Company 20065 Inzago (MI) ITALY Sono state seguite le seguenti normative armonizzate: The following harmonized standards are used: EN 60529 (70-1) Gradi di protezione degli involucri (Codici IP). Degrees of protection provided by enclosures (IP code). EN 50081-1 (CEI 110-7) Compatibilità elettromagnetica - Norma generica sull emissione - Parte 1: Ambienti residenziali, commerciali e dell industria leggera. Electromagnetic compatibility - Generic emission standard - Parte 1: Residential, commercial and light industry. EN 60335-1 (61-50) Sicurezza degli apparecchi elettrici d uso domestico e similare parte 1 Norme generali, relativi ai paragrafi 10-11- 13-16-18-21-23-24.1-25-27-29. Safety of household and similar electrical applicances ; part.1 : General requirements (See Declaration of Conformity Directive 73/23/CEE and 89/336/CEE relative at par. 10-11-13-16-18-21-23-24.1-25-27-29. I prodotti indicati non hanno nessun tipo di protezione contro funzionamenti anomali. The listed products are not th. prot. or imp. prot. IEC 34-1 Macchine elettriche rotanti; parte 1 Caratteristiche nominali e di funzionamento Rotating electrical machines; part 1 : ating and performance La conformità alla Direttiva EMC 89/336/CEE é valida se il prodotto è collegato direttamente alla rete elettrica. Se il prodotto è assemblato in un sistema o combinato con altri prodotti, l installatore è responsabile per il rispetto della Direttiva EMC del sistema completo. The compliance with EMC Directive 89/336/EEC is valid if the product is connected directly to the main supply. If the product is integrated in a system or combined with other products the systemmanufacturer is responsible for compliance with EMC for the complete system. Firma/Signature M-AT-044 (Dich_sprot).docdot

Dichiarazione di Conformità CE EC Declaration of Conformity come definito nella Direttiva Bassa Tensione 73/23/CEE e nella Direttiva EMC 89/336/CEE as defined by the Low Voltage Directive 73/23/EEC and the EMC guideline 89/336/EEC Tipo di macchina Type of machinery Motori Elettrici NET4U16NNN002 Electric Motor I prodotti sono sviluppati, progettati e costruiti in conformità alle Direttive Bassa Tensione 73/23/CEE e Direttiva EMC 89/336/CEE sotto la responsabilità di The products are developped, designed and manufactured in accordance with the EC Directives Low Voltage 73/23/EEC and EMC Directive 89/336/EEC, on the own responsability of Azienda ELCO S.p.A. Via Marconi, 1 Company 20065 Inzago (MI) ITALY Sono state seguite le seguenti normative armonizzate: The following harmonized standards are used: EN 60529 (70-1) Gradi di protezione degli involucri (Codici IP). Degrees of protection provided by enclosures (IP code). EN 50081-1 (CEI 110-7) Compatibilità elettromagnetica - Norma generica sull emissione - Parte 1: Ambienti residenziali, commerciali e dell industria leggera. Electromagnetic compatibility - Generic emission standard - Parte 1: Residential, commercial and light industry. EN 60335-1 (61-50) Sicurezza degli apparecchi elettrici d uso domestico e similare parte 1 Norme generali, relativi ai paragrafi 10-11- 13-16-18-21-23-24.1-25-27-29. Safety of household and similar electrical applicances ; part.1 : General requirements (See Declaration of Conformity Directive 73/23/CEE and 89/336/CEE relative at par. 10-11-13-16-18-21-23-24.1-25-27-29. I prodotti indicati non hanno nessun tipo di protezione contro funzionamenti anomali. The listed products are not th. prot. or imp. prot. IEC 34-1 Macchine elettriche rotanti; parte 1 Caratteristiche nominali e di funzionamento Rotating electrical machines; part 1 : ating and performance La conformità alla Direttiva EMC 89/336/CEE é valida se il prodotto è collegato direttamente alla rete elettrica. Se il prodotto è assemblato in un sistema o combinato con altri prodotti, l installatore è responsabile per il rispetto della Direttiva EMC del sistema completo. The compliance with EMC Directive 89/336/EEC is valid if the product is connected directly to the main supply. If the product is integrated in a system or combined with other products the systemmanufacturer is responsible for compliance with EMC for the complete system. Firma/Signature M-AT-044 (Dich_sprot).docdot

Dichiarazione di Conformità CE EC Declaration of Conformity come definito nella Direttiva Bassa Tensione 73/23/CEE e nella Direttiva EMC 89/336/CEE as defined by the Low Voltage Directive 73/23/EEC and the EMC guideline 89/336/EEC Tipo di macchina Type of machinery Motori Elettrici NET4U25NN202 Electric Motor I prodotti sono sviluppati, progettati e costruiti in conformità alle Direttive Bassa Tensione 73/23/CEE e Direttiva EMC 89/336/CEE sotto la responsabilità di The products are developped, designed and manufactured in accordance with the EC Directives Low Voltage 73/23/EEC and EMC Directive 89/336/EEC, on the own responsability of Azienda ELCO S.p.A. Via Marconi, 1 Company 20065 Inzago (MI) ITALY Sono state seguite le seguenti normative armonizzate: The following harmonized standards are used: EN 60529 (70-1) Gradi di protezione degli involucri (Codici IP). Degrees of protection provided by enclosures (IP code). EN 50081-1 (CEI 110-7) Compatibilità elettromagnetica - Norma generica sull emissione - Parte 1: Ambienti residenziali, commerciali e dell industria leggera. Electromagnetic compatibility - Generic emission standard - Parte 1: Residential, commercial and light industry. EN 60335-1 (61-50) Sicurezza degli apparecchi elettrici d uso domestico e similare parte 1 Norme generali, relativi ai paragrafi 10-11- 13-16-18-21-23-24.1-25-27-29. Safety of household and similar electrical applicances ; part.1 : General requirements (See Declaration of Conformity Directive 73/23/CEE and 89/336/CEE relative at par. 10-11-13-16-18-21-23-24.1-25-27-29. I prodotti indicati non hanno nessun tipo di protezione contro funzionamenti anomali. The listed products are not th. prot. or imp. prot. IEC 34-1 Macchine elettriche rotanti; parte 1 Caratteristiche nominali e di funzionamento Rotating electrical machines; part 1 : ating and performance La conformità alla Direttiva EMC 89/336/CEE é valida se il prodotto è collegato direttamente alla rete elettrica. Se il prodotto è assemblato in un sistema o combinato con altri prodotti, l installatore è responsabile per il rispetto della Direttiva EMC del sistema completo. The compliance with EMC Directive 89/336/EEC is valid if the product is connected directly to the main supply. If the product is integrated in a system or combined with other products the systemmanufacturer is responsible for compliance with EMC for the complete system. Firma/Signature M-AT-044 (Dich_sprot).docdot

Dichiarazione di Conformità CE EC Declaration of Conformity come definito nella Direttiva Bassa Tensione 73/23/CEE e nella Direttiva EMC 89/336/CEE as defined by the Low Voltage Directive 73/23/EEC and the EMC guideline 89/336/EEC Tipo di macchina Type of machinery Motori Elettrici NET4U34NNN001 Electric Motor I prodotti sono sviluppati, progettati e costruiti in conformità alle Direttive Bassa Tensione 73/23/CEE e Direttiva EMC 89/336/CEE sotto la responsabilità di The products are developped, designed and manufactured in accordance with the EC Directives Low Voltage 73/23/EEC and EMC Directive 89/336/EEC, on the own responsability of Azienda ELCO S.p.A. Via Marconi, 1 Company 20065 Inzago (MI) ITALY Sono state seguite le seguenti normative armonizzate: The following harmonized standards are used: EN 60529 (70-1) Gradi di protezione degli involucri (Codici IP). Degrees of protection provided by enclosures (IP code). EN 50081-1 (CEI 110-7) Compatibilità elettromagnetica - Norma generica sull emissione - Parte 1: Ambienti residenziali, commerciali e dell industria leggera. Electromagnetic compatibility - Generic emission standard - Parte 1: Residential, commercial and light industry. EN 60335-1 (61-50) Sicurezza degli apparecchi elettrici d uso domestico e similare parte 1 Norme generali, relativi ai paragrafi 10-11- 13-16-18-21-23-24.1-25-27-29. Safety of household and similar electrical applicances ; part.1 : General requirements (See Declaration of Conformity Directive 73/23/CEE and 89/336/CEE relative at par. 10-11-13-16-18-21-23-24.1-25-27-29. I prodotti indicati non hanno nessun tipo di protezione contro funzionamenti anomali. The listed products are not th. prot. or imp. prot. IEC 34-1 Macchine elettriche rotanti; parte 1 Caratteristiche nominali e di funzionamento Rotating electrical machines; part 1 : ating and performance La conformità alla Direttiva EMC 89/336/CEE é valida se il prodotto è collegato direttamente alla rete elettrica. Se il prodotto è assemblato in un sistema o combinato con altri prodotti, l installatore è responsabile per il rispetto della Direttiva EMC del sistema completo. The compliance with EMC Directive 89/336/EEC is valid if the product is connected directly to the main supply. If the product is integrated in a system or combined with other products the systemmanufacturer is responsible for compliance with EMC for the complete system. Firma/Signature M-AT-044 (Dich_sprot).docdot