Connecting clamps
Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail positions with the release of a single bolt or knob. Material: reinforced, screws in stainless steel. 13135 13139 134 Example application Adjustment with ratchet handle code 1 Adjustment with bolts Adjustment with knob code 131 264 CONVEYOR LINE
Positive action cross block EXAMPLE APPLICATION Zinc plated steel POSITIVE ACTION CROSS BLOCK Material: reinforced. Use: rod Ø mm. 1 Without screws n 0 POSITIVE ACTION CROSS BLOCK WITH SCREWS Material: reinforced, screws in stainless steel. 131 With screws n 0 POSITIVE ACTION CROSS BLOCK WITH STAR KNOBS Material: reinforced, knobs in with stainless steel insert. Use: rod Ø mm. 132 With star knobs n 0 POSITIVE ACTION CROSS BLOCK WITH KNOBS Material: reinforced, knobs in with zinc plated steel insert. Use: rod Ø mm. 133 With knobs n 0 CONVEYOR LINE 265
Quick positioning cross block Ø36 2 17.5 25 17.5 21 60 21 Ø 50 QUICK RELEASE CROSS BLOCK Material: housing in reinforced, hardware in stainless steel, knobs in with bushings in nickel plated brass. Features: it connects two round rods at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob. 133 13317 133 13319 133 13321 Ø36 21 17.5 2 25 17.5 60 21 Ø 50 QUICK RELEASE CROSS BLOCK Material: body in stainless steel, hardware in stainless steel, knobs in with bushings in nickel plated brass. Features: it connects two round rods at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob. with knobs colour Orange Black 13360V 13360VN 13361V 13361VN 13362V 13362VN 13363V 13363VN 13364V 13364VN 13365V 13365VN 266 CONVEYOR LINE
Quick positioning cross block Rod not included 8 3 CROSS BLOCK WITH KNOBS Components: Housing in reinforced. Washer and hardware in stainless steel. Knobs in reinforced with one threaded insert in stainless steel and one brass bushing. Features: Connects two round rods or one round rod with square bar at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob. 133V 13311V 13322V 133V Rod not included CROSS BLOCK WITH KNOBS Components: Housing in reinforced. Washer and hardware in stainless steel. Knobs in reinforced with one threaded insert in stainless steel and one brass bushing. Features: Connects one round rod with flat bar at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob. 13260V 13261V 13262V 13263V FLAT BAR A x B 25 x 8 25 x 8 25 x 6 25 x 6 CONVEYOR LINE 267
Dual action cross block PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing (). - Internal Housing (see the table). - Closing Cap (). - Spring (steel). - Knob ( with threaded insert in stainless steel). - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Rod not included Internal block 133 13311 13322 133 13313 133 13323 133 Nickel plated brass For a correct use of these products and to get the best performance, please call our engineering experts. 268 CONVEYOR LINE
Dual action cross block fine positioning version PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing () - Internal Housing (see the table) - Closing Cap () - Spring (steel) - Knob ( with threaded insert in stainless steel). - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Rod not included Internal block 13313FP 133FP 13323FP 133FP Nickel plated brass For a correct use of these products and to get the best performance, please call our engineering experts. CONVEYOR LINE 269
Dual action cross block (for flat bar) PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing () - Internal Housing (see the table) - Closing Cap () - Spring (steel) - Knob ( with threaded insert in stainless steel. - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Rod not included Internal block Flat bar A x B 13260 13261 13262 13263 13264 13265 13266 13267 Nickel plated brass 25 x 8 25 x 8 25 x 6 25 x 6 25 x 8 25 x 8 25 x 6 25 x 6 For a correct use of these products and to get the best performance, please call our engineering experts. 270 CONVEYOR LINE
Dual action cross block fine positioning version (for flat bar) PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing () - Internal Housing (see the table) - Closing Cap () - Spring (steel) - Knob ( with threaded insert in stainless steel - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Internal block Flat bar A x B 13264FP 13265FP 13266FP 13267FP Nickel plated brass 25 x 8 25 x 8 25 x 6 25 x 6 For a correct use of these products and to get the best performance, please call our engineering experts. CONVEYOR LINE 271
Cross blocks CROSS BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: it connects two round or square rods at 90. Material: reinforced with stainless steel bolts. Supply: unassembled. 13666 13667 13668 13669 13670 n 0 CONNECTING JOINT AND PINS Supply: separate two pins and one connecting joints. 13671 n 0 272 CONVEYOR LINE
Extra long cross or parallel blocks EXTRA LONG CROSS BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: it connects two round or square rods at 90. Material: reinforced with stainless steel bolts. Internal connecting joint and pins in nickel plated brass. 13651P 13652P 13653P 13654P 13655P 13656P 13657P 13658P 13659P 13660P 13661P 13662P 13663P 13664P 13665P n 0 EXTRA LONG PARALLEL BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: it connects two round or square rods at parallel. Material: reinforced with stainless steel bolts. Internal connecting joint and pins in nickel plated brass. 13651L 13652L 13653L 13654L 13655L 13656L 13657L 13658L 13659L 13660L 13661L 13662L 13663L 13664L 13665L n 0 CONVEYOR LINE 273
T - Clamp (base) T-MOBILE CLAMPS Features: it mounts to the side of equipment to provide support for light duty application. Use: with single cross block Material: reinforced with stainless steel bolts. Supply: unassembled 18 n 0 CROSS BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: reinforced with stainless steel bolts. Supply: unassembled. 13666 13667 13668 13669 13670 n 0 CONNECTING JOINT AND PINS Supply: separate two pins and one connecting joints. 13671 n 0 274 CONVEYOR LINE
T - mobile clamp T-MOBILE CLAMPS Features: mounts to side of equipment to provide support light duty rod type guide rail system. Material: reinforced with stainless steel bolts; Internal connecting joints and pins in nickel plated brass. 13P 1311P 13P 1313P 13P n 0 T-MOBILE CLAMPS Features: mounts to side of equipment to provide support light duty rod type guide rail system. Material: reinforced with stainless steel bolts; Internal connecting joints and pins in nickel plated brass. 13L 1311L 13L 1313L 13L n 0 CONVEYOR LINE 275
Standard cross blocks Acetal resin CROSS BLOCK Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: reinforced with stainless steel fasteners. 135 136 137 13111 1 138 139 131 131 131 13113 132 193 133 134 134K 25 27 m m 27 73 HEAVY DUTY CROSS BLOCK Features: cross blocks, in a variety of bore configurations,including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: acetal resin with stainless steel fasteners. 13S006 13S007 13S008 13S009 13S001 13S00111 Ref. VG-6--M VG-6--M VG-6--M VG-6--M VG-6--M VG-6--M n 276 CONVEYOR LINE
Standard cross blocks Acetal resin MINI CROSS BLOCK Features: cross blocks, in a variety of bore configurations,including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: reinforced with stainless steel fasteners. 131 135 136 131 137 1 8 8 8 8 21 53.6 M5 PD2 HEAVY DUTY MINI CROSS BLOCK Features: cross blocks, in a variety of bore configurations,including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: acetal resin with stainless steel fasteners. 13S001 13S001 13S001 Ref. VG-619-M VG-619-M VG-619-M 8 8 n CONVEYOR LINE 277
T. Clamp T-CLAMP Features: mounts to side of equipment to provide support for light duty rod type guide rail system. Material: reinforced with stainless steel fasteners. 132 131 131 8 Ø DF CLAMP Features: used to hold many types of accessories. Numerous bore sizes available. Material: reinforced with stainless steel fasteners. 13600 13601 13602 13603 13604 133 13605 13606 13607 13608 13609 131 136 13611 136 13613 136 132 8 8 19 8 19 8 19 278 CONVEYOR LINE
Reflector clamp REFLECTOR CLAMP Features: used to hold reflectors using a cap screw and nut or pression clip. Material: reinforced with stainless steel fasteners. 137 138 139 8 CUP 1.5 TUBE - external d. mm - thickness 1 mm - length 6 m Ø 8 Ø 9.5 8.4 135 SS 136 n 0 PA-FG CONVEYOR LINE 279
Mounting assembly kit Polyethylene REFLECTOR MOUNTING ASSEMBLY KIT (for reflector) Material: clamps in reinforced tightening bolt and connecting tubes in stainless steel, closing caps in polyethylene. Components: nr 1 T-Clamp, nr 1 clamp, nr 1 cross block, nr 2 connecting tubes, nr 4 closing caps. Supply: unassembled. *Packaging: 25 completely kit. 138 n 25* SENSOR MOUNTING ASSEMBLY KIT (for Ø mm sensor) Material: clamps in reinforced tightening bolt and connecting tubes in stainless steel, closing caps in polyethylene. Components: nr 1 T-Clamp, nr 1 clamp, nr 1 cross block, nr 2 connecting tubes, nr 4 closing caps. Supply: unassembled. *Packaging: 25 completely kit. 134 n 25* 280 CONVEYOR LINE
Accessory holders S000 UNIVERSAL ACCESSORY HOLDERS Photocells, sensors, spray heads, miniature pneumatics, plus many other accessories can easily be held in place using accessory holders. These multi-axis assemblies are designed to offer unlimited possibilities for mounting accessories on conveyors and machinery of all types. Made of corrosion resistant thermoplastic and stainless steel, accessory holder can withstand harsh operating environments. Accessory holders are configured to mount sensor or reflectors of various dimensions. The components are available as loose parts or as an assembly kit. Material: clamps in reinforced, tubes in stainless steel. S00059 S00056 PATENTED Ref. W H S00050 S00071 S00072 S00053 VG-625--3506 VG-625--5006 VG-625-45-3506 VG-625-45-5006 0 0 5 5 95 135 95 135 6.5 n S00073 S00074 S00051 S00075 VG-625--35 VG-625--50 VG-625-45-35 VG-625-45-50 0 0 5 5 95 135 95 135 9.5 n S00076 S00077 S00078 S00079 VG-625--3513 VG-625--5013 VG-625-45-3513 VG-625-45-5013 0 0 5 5 95 135 95 135.7 n S00080 S00081 S00082 S00083 VG-625--35 VG-625--50 VG-625-45-35 VG-625-45-50 0 0 5 5 95 135 95 135 n S00084 S00052 S00085 S00054 VG-625--3519 VG-625--5019 VG-625-45-3519 VG-625-45-5019 0 0 5 5 95 135 95 135 19 n ACCESSORY HOLDER Material: clamps in reinforced, tubes in stainless steel. Ref. 8 S00060 S00062 S00059 S00063 S00061 S00065 S00067 S00064 S00068 S00066 VG-628-35-- VG-628-35--38 VG-628-35-- VG-628-35--58 VG-628-35--34 VG-628-50-- VG-628-50--38 VG-628-50-- VG-628-50--58 VG-628-50--34 0 mm 5 mm 6.4 9.5.7 19 6.4 9.5.7 19 n n 25.7 CONVEYOR LINE 281
Accessory holders 60 2 26 Polyamide PATENT FEATURE CROSS CLAMP IN STAINLESS STELL Par. # 6,591,978 (USA) Ref. S00069 VG-629--.7 mm.7 mm n SS.7 External diameter S00070 PATENTED 26.2 50.8 60.2.5 59.7 CROSS CLAMP ADJUSTABLE IN STAINLESS STEEL Ref. S00070 VG-629R--.7 mm.7 mm n SS.7 6.5 PATENT FEATURE Par. # 6,427,829 B1 Par. # 6,591,978 (USA) 5 S00058 38 60 Lc 38 27 6.5 19 MODEL T-ROD Ref. SPACERS Material: clamps in reinforced, tubes in stainless steel. S00055 S00056 S00057 VG-627-- VG-627-45- VG-627-80- 95 135 2 n S00058 Ref. VG-627S-34 n 282 CONVEYOR LINE
Extra cross block 3 3 EXTRA CROSS BLOCK STANDARD Material: reinforced bolts and nut in stainless steel. Note: max recommended tightening torque 3 Kgm. 13509 135 13511 135 13513 135 135 135 13517 135 13519 135 13521 13522 13523 13524 EXTRA CROSS BLOCK WITH HANDLES Material: cross block in reinforced, bolts and nut in stainless steel, adjustable handles in reinforced with insert in nickel plated brass. Application: for use in areas where frequent adjusting is required for vertical movement. Note: max recommended tightening torque 3 Kgm. 13509V 135V 13511V 135V 13513V 135V 135V 135V 13517V 135V 13519V 135V 13521V 13522V 13523V 13524V CONVEYOR LINE 283
Extra cross block EXTRA CROSS BLOCK WITH HANDLES Material: cross block in reinforced, bolts and nut in stainless steel, adjustable handles in reinforced with insert in nickel plated brass. Applications: for use in areas where frequent adjusting is required for horizontal and vertical movement. Note: max recommended tightening torque 3 Kgm. 13509HV 135HV 13511HV 135HV 13513HV 135HV 135HV 135HV 13517HV 135HV 13519HV 135HV 13521HV 13522HV 13523HV 13524HV EXTRA CROSS BLOCK WITH HANDLES Material: cross block in reinforced, bolts and nut in stainless steel, adjustable handles in reinforced with insert in nickel plated brass. Applications: for use in areas where frequent adjusting is required for horizontal and vertical movement. Note: max recommended tightening torque 3 Kgm. 13509H 135H 13511H 135H 13513H 135H 135H 135H 13517H 135H 13519H 135H 13521H 13522H 13523H 13524H DF 1 DF 2 - - - - 284 CONVEYOR LINE
Bracket BRACKET WITH HAND KNOB (Hand knob/eyelet does not mark rod surface) Material: bracket in reinforced, eyelet in metal, knob in with bushing insert in nickel plated brass, washer in stainless steel. Features: knob fastening provides holding and positioning for many rods. Heavy duty construction for increased strength and rigidity. 13231 13232 13233 13234 13235 BRACKET WITH SCREW OR HAND KNOB Material: bracket in reinforced, stainless steel screw, knob in with threaded insert in stainless steel. with screw 13236 13238 132 13242 13244 with knob 13237 13239 13241 13243 13245 CONVEYOR LINE 285
Universal clamp for photocells or reflectors 136H 13617H 136H 13619H 136H Movement on the three axis UNIVERSAL CLAMP WITH ADJUSTABLE HANDLE FOR PHOTOCELLS OR REFLECTORS Material: clamp in reinforced, tightening bolt in stainless steel, adjustable handle in with threaded insert in nickel plated brass. Note: max recommended tightening torque 2 Kgm. 136 13617 136 13619 136 Movement on the three axis UNIVERSAL CLAMP FOR PHOTOCELLS OR REFLECTORS Material: clamp in reinforced, tightening bolt in stainless steel. Note: max recommended tightening torque 2 Kgm. 286 CONVEYOR LINE
Suitable photocell types PRK 95 LEUZE OMRON E3S-DSB 29.1 86.4 79.3 66.5 74.5 71.7 95.9.6 34.5 88.6 96.5 42.7 82.7 54 WT27 SICK-WL27 SICK PRK 46 LEUZE PRK 46 LEUZE KIT UNIVERSAL CLAMP FOR PHOTOCELLS OR REFLECTORS WITH TUBE Material: cross clamp in reinforced, tightening bolt and tube in stainless steel. Note: max recommended tightening torque 2 Kgm. Movement on the three axis Ø 39 11 8 7 29.5 24.5 0 65 52.5 Ø32 Ø32 136 25.5 60 111 25.5 Ø CONVEYOR LINE 287
Clamp for photocells or reflectors Pos.A CLAMP FOR PHOTOCELLS OR REFLECTORS Material: reinforced, tightening bolts in stainless steel. Use: can be fitted in position A - B - C Supply: assembled, (position A). 13500 13505 13506 13507 13508 Pos.B Pos.C 90 38 32 DIA.5 75 52 23 45 288 CONVEYOR LINE
Photocell accessories BOTTLE INDICATOR Application: activation of photocells on conveyors and machines. 1 PA-FG 6.5 45 = 34 = 19 2.5 35 60 2.5 hole for metal insert CONTROL CONTACT LEVER Application: activation of photocells on conveyors and machines. 139 139SF with hole without hole PA-FG CONVEYOR LINE 289
Photocell accessories SIDE BRACKET FOR HORIZONTAL TUBES Material: bracket in reinforced, nut, bolt and washers in stainless steel. 13898 CLAMP BRACKET OVER HEAD Material: bracket in reinforced, threaded bushing in nickel plated brass. 13846 13899 X 55 64.5 290 CONVEYOR LINE
Split shafting collars SPLIT SHAFTING COLLAR Material: reinforced, bolts in stainless steel, threaded insert in nickel plated brass. Use: these parts can be used on the conveyors as a reference point when the side guides need to be repositioned. Note: The new collars offer high corrosion resistance. The new part exhibits high strength at considerably less cost than stainless steel. The new collars are the ideal replacement for conventional al collars in situation where they cannot be easily removed and replaced. Type d D L K Screws 696 698 700 697 701 699 702 703 704 7 705 706 7 B A A B A A A A A B A A B 25 35 28 39 39 39 44 49 49 56 64 64 27 22 27 29 34 39 39 45 51.5 51.5 M3 M3 M3 M4 M3 M4 M4 M4 M4 M4 M4 M5 M4 n 0 CONVEYOR LINE 291
Split shafting collars for shaft with keyway A H Ød K L ØD SPLIT SHAFTING COLLAR Material: reinforced, screws in stainless steel, threaded insert in nickel plated brass. Use: for shaft with key way. 7 709 708 707 d 25 35 D 45 50 57 64 A 8 P9 8 P9 P9 P9 H 28.3 33.3 38.3 43.3 + 0.2 0 + 0.2 0 + 0.2 0 + 0.2 0 L K 34 39 45 51.5 Screws M4 M4 M4 M5 n 0 IDLER SPACER For shaft Ø B L 829 8 50 29 29 PA 292 CONVEYOR LINE