By Alegre Design - Features... 0 Finishes... 05 Serie 0... 06 Serie 0... 0 Serie 0 Draughtsman Chair... 0 Ergonomics... 09 Ecodesign... 0 - Price List Serie 0... Serie 0 Draughtsman Chair... Serie 0... Optional accessories... 6
FEATURES AUTO-WEIGHT SYNCHRO CONTROL Synchro mechanism auto-weight control, it adapts automatically to the user s weight. In order to adjust and adapt the tension to each user s requirement there is a knob underneath of the seat (A). 0º pos. 0º A Tension Control Knob includes back tilt positions offering tilting angles from 0º when chair is on up-right blocked position up to 0º. To adjust and select the tilt angle of the back just pull out the handle underneath of the seat (B). B Back tilt positions control AIR COMFORT SYSTEM The seat has been designed with air chambers, to improve comfort, flexibility and the distribution of pressure for any user. SEAT HEIGHT ADJUSTMENT The seat height is adjusted using a gas-lift by lifting up the knob under the seat (C). (Lowest seat height: 6 cm / Maximum seat height: 56 cm). 6 cm 56 cm C seat height Gas lift SEAT SLIDE (TRASLA) Ideal feature to adjust the distance between the seat and the back adapting the chair to different user anthropometrics. Pull out the lever (D) and fix it back in different positions. The system includes a self-return mechanism to return the seat to the initial position when standing up by pulling the lever. (total sliding distance = cm / Each position offers 0 mm adjustment). cm different positions. Depth adjustment with self-return Sliding seat lever D mechanism 0
FEATURES 5 ADAPTATIVE LUMBAR incorporates an adaptative lumbar section (E) integrated in the backrest adapting to user s back s shape. E Integrated lumbar support. ADJUSTABLE ARMREST has different arm options: aluminium or PP. Height adjustment: adjustable using the knob under the arm-rest (F), it offers height positions. Distance between arms: Width adjustment using the handle under the seat (G), each arm can be adjusted,5 cm, so maximum total adjusment is 5 cm. 60º Swivel arm system (Anti-panic): Only available with the aluminium arm option, 60º Swivel armrest movement allowing horizontal rotation of arm rests. Incorporation of a panic trigger in the aluminum arms (H). POLYAMIDE ARM cm pos.,5 cm,5 cm F G Height adjustable arm Distance between arms ALUMINIUM ARM 60º H F cm pos. F G G Height adjustable arm Distance between arms H H 60º 60º Swivel arm movement LOCKED - without movement (Only in positions 0º and 0º) UNLOCKED - with movement 0
BASES AND CASTORS CASTORS AND CAPS POLYAMIDE BASE Polyamide (PA) Arms ALUMINIUM BASE Polyamide (PA) Arms Aluminium Arms POLYAMIDE BASE FINISHES ALUMINIUM BASE FINISHES Black White White Black Polished STANDARD CASTORS All chairs include as standard soft castors with Teflon thread which allows an easy and light movement of the chair. STANDARD CASTORS Silent teflon tread. Black finish. 65mm diameter No self-locking. OPTIONAL CASTORS Self-Locking castors are popular as they are in line with most of the security restrictions required on projects. They avoid accidental movement of the chair and they only have a small disadvantage as the chairs is not easy to slide when no weight is on it. While sat on the chair, the chair moves easily with no resistance. AUTO-BREAKING CASTORS This system provides security as it avoids accidental movement of the chair. While sat on the chair, it moves easily. ANTISTATIC CASTORS AUTO-BREAKING HOLE CASTORS This system provides security as it avoids accidental movement of the chair. While sat on the chair, it moves easily. It includes a system to unlock the breaking system to use these castors just as an aestetic option. POLYPROPYLENE CAPS 0
SERIES 0 DESCRIPTION Backrest, PP with glass fibre (PP + 0% G.F.) frame. It also incoporates several splines for better back breathing. Flexible moulded polyurethane foam, pphosltered with different fabrics. backrest models: High backrest and Standard Backrest Adaptative lumbar support 5 D Adjustable arms: Height and width adjustment. Available in PP structure. D Adjustable arms: Height and width adjustment. 60º Swivel armrest movement. Available in aluminium structure. Seat with ACS technology (airflow comfort system). Made of PU (polyurethane) flexible moulded foam (density 0-5 kg/m ). Upholstered seat available in a wide range of fabrics. Gas lift 6 Auto-weight synchro control mechanism. back tilt positions Seat slide (Trasla) 5 star base. Die cast aluminium or polyamide base with glass fibre 5 6 9 Serveral castors or caps available BACKREST AND SEAT Group M-Melange, Group T-C and Group F - Attantic (PLEASE SEE FINISHES AND FABRIC ON THE PREVIOUS PAGE) BASES AND CASTORS 9 Polyamide - Ø 6,5 cm Silent black castor - Ø 65 mm FINISHES Black and White OPTIONAL ACCESSORIES Aluminum injection - Ø 6,5 cm Silent black castor - Ø 65 mm FINISHES White, Black and Polished. AUTO-BRAKING CASTORS AUTO-BRAKING HOLE CASTORS ANTISTATIC CASTORS POLYPROPYLENE CAPS DIMENSIONS Standard Backrest Total height: from 90 to 00 mm Total width: 65 to 690 mm Total depth: 65 mm Seat height: from 60 to 560 mm Seat width: 60 to 50 mm Seat depth: from 0 to 50 mm High backrest Total height: from 90 to 00 mm Total width: 65 to 690 mm Total depth: 65 mm Seat height: from 60 to 560 mm Seat width: 60 to 50 mm Seat depth: from 0 to 50 mm 6-5 /5 6-5 /5 6-5 /5 6-5 /5 9-0 6-56 9-0 6-56 9-0 6-56 9-0 6-56 5 5 5 5 Ø6,5 Ø6,5 Ø6,5 Ø6,5 06
SERIES 0 DESCRIPTION Backrest, PP with glass fibre (PP + 0% G.F.) frame. It also incoporates several splines for better back breathing. backrest models: High backrest and Standard Backrest Adaptative lumbar support D Adjustable arms: Height and width adjustment. Available in polyamide structure. D Adjustable arms: Height and width adjustment. 60º Swivel armrest movement. Available in aluminium structure. Seat with ACS technology (airflow comfort system). Made of PU (polyurethane) flexible moulded foam (density 0-5 kg/m ). Upholstered seat available in a wide range of fabrics. 5 6 Gas lift Auto-weight synchro control mechanism. back tilt positions 9 Seat slide (Trasla) 5 star base. Die cast aluminium or polyamide base with glass fibre Serveral castors or caps available 5 6 BACKREST AND SEAT Group M-Melange, Group T-C and Group F - Attantic (PLEASE SEE FINISHES AND FABRIC ON THE PREVIOUS PAGE) BASES AND CASTORS 9 Polyamide - Ø 6,5 cm Silent black castor - Ø 65 mm FINISHES Black and White OPTIONAL ACCESSORIES Aluminum injection - Ø 6,5 cm Silent black castor - Ø 65 mm FINISHES White, Black and Polished. AUTO-BRAKING CASTORS AUTO-BRAKING HOLE CASTORS ANTISTATIC CASTORS POLYPROPYLENE CAPS DIMENSIONS Standard Backrest Total height: from 90 to 00 mm Total width: 65 to 690 mm Total depth: 65 mm Seat height: from 60 to 560 mm Seat width: 60 to 50 mm Seat depth: from 0 to 50 mm High backrest Total height: from 90 to 00 mm Total width: 65 to 690 mm Total depth: 65 mm Seat height: from 60 to 560 mm Seat width: 60 to 50 mm Seat depth: from 0 to 50 mm 6-5 /5 6-5 /5 6-5 /5 6-5 /5 9-0 6-56 9-0 6-56 9-0 6-56 9-0 6-56 5 5 5 5 Ø6,5 Ø6,5 Ø6,5 Ø6,5 0
SERIES 0 - DRAUGHTSMAN DESCRIPTION Backrest, PP with glass fibre (PP + 0% G.F.) frame. It also incoporates several splines for better back breathing. Model with low backrest Adaptative lumbar support 5 D Adjustable arms: Height and width adjustment. Available in polyamide structure. D Adjustable arms: Height and width adjustment. 60º Swivel armrest movement. Available in aluminium structure. Seat with ACS technology (Air Comfort System). Made of PU (polyurethane) flexible moulded foam (density 0-5 kg/m ). Upholstered seat available in a wide range of fabrics. Gas lift 6 6 Auto-weight synchro control mechanism. back tilt positions 5 Seat slide (Trasla) Chromed steel footrest - Ø5cm. Curved tube Ø mm,,5 mm thickness 9 5 star base. Die cast aluminium or polyamide base with glass fibre 0 Serveral castors or caps available BACKREST AND SEAT Group M-Melange, Group T-C and Group F - Attantic (PLEASE SEE FINISHES AND FABRIC ON THE PREVIOUS PAGE) 9 BASES AND CASTORS Polyamide - Ø 6,5 cm Silent black castor - Ø 65 mm FINISHES Black and White OPTIONAL ACCESSORIES 0 Aluminum injection - Ø 6,5 cm Silent black castor - Ø 65 mm FINISHES White, Black and Polished. AUTO-BRAKING CASTORS AUTO-BRAKING HOLE CASTORS ANTISTATIC CASTORS POLYPROPYLENE CAPS DIMENSIONS Total height: from.065 mm to.5 mm Total width: 65 mm Total depth: 65 mm Seat height: from 65 mm to 5 mm Seat width: from 60 mm to 50 mm Seat depth: from 0 mm to 50 mm 6 /5 6 /5 06,5 -,5 6,5 -,5 06,5 -,5 6,5 -,5 Ø6,5 Ø6,5 0
ERGONOMICS A correct posture at work to avoid physical problems Seat adjustment. Forearms must be parallel to the desk top as in a right angle with the rest of the arm. Both feet must be lean on the floor and knees must be in right angle too. Adaptative Lumbar incorporates an adaptative lumbar section integrated in the backrest adapting to user s back s shape. Adjustable arms ( positions) Place the chair arms in the lower position to get better mobility. For statics works, adjust height and distance to that point where the forearms perfectly lean. Different ergonomics conditions and specific movements for each task It is necessary to alternate daily dynamic and static tasks. Dynamic tasks. Document manipulation, communication and so on Select positions, or on the back tilt adjustment knob. Put the arms in the lowest position. Torsion. Flexible back. Movements go naturally with the user action. Static work Document analysis and writing, intensive computer work... Select position on the back tilt adjustment knob. Put the arms in the lowest position. Dynamic tasks. Torsion. Incorrect Postures Key points.. A lower position from the desk produces neck pain.. An incorrect back support may produce back problems.. Legs too stretched or too vended may cause overstressed body joints. 09
CLASE E STANDARD - NORMA EUROPEA ECODESIGN MATERIALS Maximum use of materials to eliminate and minimize scraps. Use of recyclable and recycled materials in those components that do not affect the functionality and durability.,% RECYCLED MATERIALS PRODUCTION Maximum optimization of energy use. Minimal environmental impact. Last generation technological systems. Zero discharge of wastewater. No VOC coatings. Processes free of heavy metals, phosphates, OC and COD. 00% RECYCLABLE ALUMINIUM, STEEL & WOOD TRANSPORT Detachable systems. Volumes that facilitate the optimization of space. Maximum reduction of energy consumption by transport. 00% RECYCLABLE PACKAGE AND THINNER FREE USE Quality and warranty. Long lasting. Replacements available. EASY TO CLEAN AND MAINTAIN DISPOSAL Waste reduction. Supplier-manufacturer packaging reuse system. Components are easy to be separated. Inks in packaging are water-based, without solvents.,% RECYCLABLE MATERIALS CERTIFICATES AND REFERENCES The different programmes get points in different environmental categories to get the LEED certificate (sustainability, material and resources, water, energy and atmosphere, inner environment quality, innovation and design). E ACTIU PRODUCE Y UTILIZA TABLEROS EN 96 The mark of responsable forestry PEFC/0--0 PEFC Certificate EN ISO 006:0 UNE-EN ISO 900:00 UNE-EN ISO 00:00 ECODESIGN Certificate ISO 900 Certificate ISO 00 Certificate E Certificate by EN 96 PARQUE TECNOLÓGICO ACTIU proyecto certificado LEED GOLD por el U.S. Green Building Council en 0 Leadership in Energy & Environmental Design 0
FABRIC FEATURES FABRIC GROUP T Material Weight Width Abrasion resistance Polyester Non metallic dyestuffs lin. metre aprox. grams cm rubs - EN ISO 9- (Martindale) 00% 60 0 50.000 Cleaning Vacuum regulary. Wipe clean with damp cloth or shampoo using propietary upholstery shampoo. Flammability BS EN 0 - & (Cigarette & Match) - BS 6:00 Low Hazard - BS 6 Part Class Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences GROUP T (Finishes) T T 5 T T 9 T 0 T 90 T 6 T T 9 T T T 06
FABRIC FEATURES FABRIC GROUP L Material Weight Width Abrasion resistance Colour fastness to light Colour fastness to rubbing Cleaning Flammability Recyclrd Polyester Non metallic dyestuffs 00% lin. metre aprox. grams 60 cm 0 rubs - EN ISO 9- (Martindale) 50.000 scale -, max. - EN ISO 05 - B0 6 scale -5, max. 5 - EN ISO 05X (wet/dry) / Vacuum regulary. Wipe clean with damp cloth or shampoo using propietary upholstery shampoo. BS EN 0 - & (Cigarette & Match) - BS 6:00 Low Hazard - BS 6 Part Class Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences FABRIC GROUP C Material Weight Width Abrasion resistance Cleaning Flammability Subject to changes and colour diferences Xtreme FlameRetardant Non metallic dyestuffs 00% lin. metre aprox. grams 0 cm 0 rubs - EN ISO 9- (Martindale) 00.000 Vacuum regulary. Wipe clean with damp cloth or shampoo using propietary upholstery shampoo. BS EN 0 - & (Cigarette & Match) - BS 6:00 Low Hazard - BS 6:00 Medium Hazard Crib 5 - DIN 0 B - NF-P-9-50 M - UNI 56 & UNI 9 Class Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. GROUP L (Finishes) L 5 L L 9 L 6 L L 9 L L GROUP C (Finishes) C C C 6 C C 9 C C C 0
FABRIC FEATURES MELANGE GROUP M Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing Cleaning US ACT Flammability Trevira CS 00% lin. metre aprox. grams 0 cm 0 rubs - EN ISO 9- (Martindale) 00.000 escale -5, max. 5 - EN ISO 95- -5 escale -, max. - EN ISO 05 - B0 5- escale -5, max. 5 - EN ISO 05X (wet/dry) -5 Shrinkage: <5% Pass Heavy Duty Upholstery BS EN 0 & - BS 55 crib 5 - FAR/JAR 55 - DIN 0:B - NFP 9-50:M - BS 6 Med.Hazard - IMO Res. A 65 (6) - UNI 95 class EMME - Calif. Tech. Bull.,E - Önorm B 5 B/Q - BS 55 p 0& - MED Certificate IMO - AM - NF D 60-0 Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences GROUP M (Finishes) M 90 M 9 M M 6 M M 9 M 9 M M 5 M 0 M M M 9 M M M 0 M 5 M 0
FABRIC FEATURES ATLANTIC GROUP F Material Polyester 00% Weight lin. metre aprox. grams 50 Width cm 50 Abrasion resistance rubs - EN ISO 9- (Martindale) 0.000 Pilling escale -5, max. 5 - EN ISO 95- -5 Colour fastness to light escale -, max. - EN ISO 05 - B0 5- Colour fastness to rubbing escale -5, max. 5 - EN ISO 05X (wet/dry) -5 Cleaning Dry cleaning. Shrinkage: <% US ACT Pass Heavy Duty Upholstery Flammability CA TB -0 California Bulletin CAL -E-Class ASTM E ÖNORM B 5-B-00-Q UK AM - NF D 60-0 Class Uno UNI 95 Class I EMME NF P 9-50 M BS EN 0 & It can also be compatible with other flammability standards. The level of fire resistance is dependent on foam used and fire protection STEEL CUT TRIO GROUP S Material New wool worsted - Nylon 90% - 0% Weight lin. metre aprox. grams 0 Width cm 0 Abrasion resistance rubs - EN ISO 9- (Martindale) 00.000 Pilling escale -5, max. 5 - EN ISO 95- - Colour fastness to light escale -, max. - EN ISO 05 - B0 5- Cleaning Vacuuming and dry cleaning US ACT Pass Heavy Duty Upholstery Flammability EN 0-/ BS 55, ignition source - DIN 0 B Önorm B/Q NF D 60 0 Italian Class IM US Cal. Tech. Bull., Sec. E IMO A.65(6) Retardant treatment : BS 55 Crib 5 Environment EU Ecolabel Subject to changes and colour diferences Environment Subject to changes and colour diferences OEKO-Tex EU Ecolabel 00% Libre de metales pesados GROUP F (Finishes) F F F F F 6 F F 5 F 0 F 0 GROUP S (Finishes) S S 5 S 9 S 6 S S