STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M VG - 87 VG 56 59 APPICATION: FOOD AND BEVERAGE INDUSTRY: PACKAGING INES WITH INCINED AND DECINED CONVEYORS (TRAYS, PET BOTTE PACKS IN HEAT SHRINK FIM, CANS IN HEAT SHRINK FIM) GENERA APPICATION: INCINED AND DECINED CONVEYORS FOR BOXES, BAGS, CRATES. A OUR HIGH FRICTION CHAINS OFFER: ONG WEARIFE OW ENERGY CONSUMPTION HIGH FRICTION PAD. INCINES UP TO 20 ARE POSSIBE EASY TO CEAN DESIGN SPECIA CONFIGURATIONS ON REQUEST INDICATE THE DISTANCE BETWEEN THE RUBBER PADS AT THE TIME OF ORDERING
8 VG STRAIGHT RUNNING CHAINS SINGE HINGE WITH HIGH FRICTION SURFACE 44 6.5 8.7 Ø 6.5 7.2 For 8 VG K25 chains a roller return track is required as the friction pad extends accross the full width of the plate. TRAVE 286 289 7 Width Width NGD 8 K25 VG NGD 4.000 82.5 ¼ 2.6.40 82VG STRAIGHT RUNNING CHAINS DOUBE HINGE WITH HIGH FRICTION SURFACE 7. 7.95 40 Ø 6.5 9 9 6.5 The return section of the conveyor can be constructed using standard wearstrips or return rollers to support the chain on its return. High breaking load. Heavy duty TRAVE 290 292 7 Width Width NGD 82 K750 VG 0 90.5 7 ½ 4 5 5 6 2.70 NGD NGD 82 K000 VG 04 00 254.0 0 92 7 ½.25 NGD 82 K200 VG 05 0 2 252 0.75 Standard length: 80 pitches (0 ft. -.048 m) Breaking oad according to Standard ISO 448 - DIN 8 54 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0
57 STRAIGHT RUNNING CHAINS HEAVY DUTY SINGE HINGE WITH HIGH FRICTION SURFACE 8257 VG 4.2 6 The return section of the conveyor can be constructed using standard wearstrips or return rollers to support the chain on its return. High strength Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and Flat Top chains TRAVE 296 298 7 Width Width NGD 8257 K450 VG 086 4. 4 ½ 90 ½.95 NGD 8257 K750 VG 08 NGD 90.5 7 ½ 4 5 5 6 2.25 9.000 NGD 8257 K000 VG 084 254.0 0 92 7 ½ 2. NGD 8257 K200 VG 085 0 2 252 0 2.95 Standard length: 80 pitches (0 ft. -.048 m) Breaking oad according to Standard ISO 448 - DIN 8 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0 55
878 TAB VG SIDEFEXING CHAINS WITH HINGE FRICTION SURFACE.8 6.8 20.8 7.05 8. Turning disks can be used, as the chain is designed to turn around a very small curve radius. NOU-S CURVES ARE STRONGY RECOMMENDED 248+25 257+259 29 295 TRAVE 24 27 7 NGD 878 TAB K25 VG 9 NGD Width mm inch R 5.000 82.5 ¼ 90 45 0.89 879 TAB VG SIDEFEXING CHAINS WITH HINGE FRICTION SURFACE.5 Ø 7.4 6 6 7.55 NOU-S CURVES ARE STRONGY RECOMMENDED TRAVE 248+25 257+259 29 295 7 Width R mm inch NGD 879 TAB K25 VG 242.40 NGD 879 TAB K25 VG 24 82.5 ¼.25 NGD 879 TAB K25 VG 6 244 NGD.0 5.000 500 45 NGD 879 TAB K450 VG 245. NGD 879 TAB K450 VG 246 4. 4 ½.45 NGD 879 TAB K450 VG 6 247.0 Standard length: 80 pitches (0 ft. -.048 m) Breaking oad according to Standard ISO 448 - DIN 8 56 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0
SIDEFEXING CHAINS FOR MAGNETIC SYSTEM WITH HIGH FRICTION SURFACE 879 M VG.5 7.55 Ø 7.4 27. 8.9 One conveyor construction Easy to clean Hygienic concept Easy maintenance 96 2 2 TRAVE 29 294 7 NGD 879 M K25 VG 5 NGD Width mm inch. R mm 5.200 82.5 ¼ 500 45. SIDEFEXING CHAINS WITH HIGH FRICTION SURFACE 882 TAB VG 8.7 7 57.2 76.2.2 6 2 0 High breaking load This chain is particularly suitable where heavier and larger products are conveyed. TRAVE 250 258 295 298 7 Width Width R NGD 882 TAB K750 VG 09 90.5 7 ½ 4 5 5 6 2.5 NGD NGD 882 TAB K000 VG 094 9.000 254.0 0 92 7 ½ 2.65 NGD 882 TAB K200 VG 095 0 2 252 0 2.90 Standard length: 80 pitches (0 ft. -.048 m) Breaking oad according to Standard ISO 448 - DIN 8 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0 57
882 M VG SIDEFEXING CHAINS FOR MAGNETIC SYSTEM HEAVY DUTY SINGE HINGE WITH HIGH FRICTION SURFACE 4.2 57 Ø 8 6 2 7 TRAVE NOU-S CURVES ARE STRONGY RECOMMENDED High breaking load Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and flat top chains Note: Plastic magnetic system chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve. Pin material: Ferritic Stainless Steel 2 0 245 295 298 7 Width Width R NGD 882 M K750 VG 70 90.5 7 ½ 4 5 5 6 2.0 NGD NGD 882 M K000 VG 704 9.000 254.0 0 92 7 ½ 2.45 NGD 882 M K200 VG 705 0 2 252 9 6 2.75 Standard length: 80 pitches (0 ft. -.048 m) Breaking oad according to Standard ISO 448 - DIN 8 58 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0
SIDEFEXING PATE TOP CHAINS BASE ROER CHAINS 9,05 mm (¾ ) PITCH WITH HIGH FRICTION SURFACE 87 VG NOU-S CURVES ARE STRONGY RECOMMENDED High speed Very high loads onger conveyors Easy maintenance Flights removable ower noise No chain elongation 252 259 0 7 Width R Roller chains Plate Rubber mm inch NGD 87 K750 VG 90 C45 NGD 90.5 7 ½ 500 NGD 87 SS K750 VG 9 SS FG 87 K200 VG 72 C45 FG 70 schore A FG 87 SS K200 VG 78 SS Standard length: 80 pitches (0 ft. -.048 m) Breaking oad according to Standard ISO 448 - DIN 8 2.6 5 0 2.8 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0 59