Cutting-Off and Grooving Tools. Basic Tool holders for Recessing Blades. Cut-Off and Deep Recessing Blades

Cutting-O and Grooving Tools 1867 Recessing blade not included. For clockwise and counterclockwise operation. Basic Tool holders or Recessing Blades 1867 Size B is equal to construction height o the grooving blade. Designation B H A M L A 1 H 4 H 2 screw 1867 mm mm mm mm mm mm mm mm ATBN 16-2 19 16 16 2, 76 26 4 3 SR-M5 x 25 11 ATBN 16-5 26 16 16 4, 76 3 12 38 SR-M6 x 3 12 ATBN 19-5 26 19 19 5, 87 33 9 38 SR-M6 x 3 13 ATBN 2-5 26 2 19 4, 87 33 8 38 SR-M6 x 3 14 ATBN 2-6 32 2 19 5,5 1 35 13 48 SR-M6 x 4 15 ATBN 25-6 32 25 2 5,5 11 36 8 48 SR-M6 x 4 16 ATBN 32-6 32 32 28 5,5 12 44 3 48 SR-M6 x 4 17 18672 Cut-O and Deep Recessing Blades W/o. depth stop. For clockwise and counterclockwise operation. For mounting cutting insert cat. no. 18674-18675. For basic holder cat. no. 1867. 18672 Designation D max W B L H 3 18672 mm mm mm mm mm SGIH 26-2 5 2,2 26 11 21,4 12 SGIH 26-3 75 3,1 26 11 21,4 13 SGIH 26-4 8 4,1 26 11 21,4 14 SGIH 32-2 4 2,2 32 15 25, 17 SGIH 32-3 1 3,1 32 15 25, 18 SGIH 32-4 1 4,1 32 15 25, 19 SGIH 32-5 12 5,1 32 15 25, 11 18674 Cutting Inserts or Recessing and Parting-O Neutral. Suitable or cut-o blades cat. no. 18672. 18674 PMK Solid carbide types H 42 Coating Coated Designation W ±,1 R ±,5 18674 mm mm a GTN-2 2,2,16 1 pcs. 113 GTN-3 3,1,2 1 pcs. 114 GTN-4 4,1,24 1 pcs. 115 GTN-5 5,1,28 1 pcs. 116 W R 7 18675 Cutting Inserts or Cutting-O. Suitable or cut-o blades cat. no. 18672. 18675 PMK Solid carbide types H 42 Coating Coated Designation W ±,1 K R ±,5 18675 mm mm a GTR-3-4D 3,1 4,2 1 pcs. 225 GTR-4-4D 4,1 4,24 1 pcs. 23 18.78 Fax order hotline: +49 624 739-1217

Ino Grooving and parting o with A-CUT (cat. no. 1868-1871) The A-CUT system covers a broad range o machining processes. It is unique due to its lexibility and cost-eectiveness. Five dierent versions o cutting inserts, as well as a versatile assortment o holders are oered. Possible operations o the A-CUT system: A-CUT cutting inserts are oered with chip crushers in our dierent geometries. Each is designed or optimal perormance in suited or your application. Geometry C AIMC cutting inserts are ideal or parting o and recessing most steel materials, alloyed steel and under tough conditions at medium to high eeds. Geometry J AIMJ double-ended inserts are ideal or cutting o and recessing carbon steel, alloyed steel, and austenitic, stainless steel in general tasks with low eed rates. The cutting edge has a po- and thin-walled parts. Geometry V AIPV cutting inserts have been developed or machining o precision grooves, or ree turning and radii. The V-version has a multi-directional chip delection step. Geometry F AIMF cutting inserts have been specially developed or axial and ace recessing. Cutting edge height at small diameters has been centred in order to provide extension o grooves by a series o overlapping recesses. Selection o the carbide quality A-CUT quality ISO Physical characteristics HRa, BBF= Bending strength N/mm 2 Uncoated HW 341 K1-K2 HRa 92.5 BBF 2.25 N/mm 2 Coated HC 363 P2-P4 CVD coated multilayer TiC+TiCN+TiN HC 3635 P25-P45 M2-M3 K2-K4 PVD coated TiCN Material Cast iron with lamellar graphite over HB 22, malleable cast iron, aluminium and aluminium-silicon, copper alloys, phenolic laminate and high-temperature resistant alloys Carbon steel, alloyed steel, cast steel, malleable cast iron, austenitic steel, martensitic stainless steel machining steel Steel, alloyed steel, stainless steel Recommended application area For medium-diiculty machining and inishing tasks at medium cutting speeds and eeds Suitable or medium-diiculty inish machining and roughing, machining with interrupted cut For general applications at medium cutting speeds and under unstable machine conditions Fax order hotline: +49 624 739-1217 18.79

Cutting-O and Grooving Tools 1868 For cutting-o and deep grooving. For cutting inserts AIMC, AIMJ and AIPV (cat. no. 18687-18696). Recessing blades A-CUT 7 B H W 1868 Cut-o blades should not be used or turning and proiling machining operations. Cutting inserts not included. L A 15 Designation B W A L H max. workpiece Ø Suitable base holder 1868 mm mm mm mm mm mm AH 11 19 2 19 2,2 1,6 86 15,7 38 ATBN 16-2 22 AH 11 26 2 26 2,2 1,6 11 21,4 5 ATBN 16-5 / ATBN 19-5 / ATBN 2-5 24 AH 11 26 3 26 3,1 2,4 11 21,4 75 ATBN 16-5 / ATBN 19-5 / ATBN 2-5 25 AH 11 26 4 26 4,1 3,2 11 21,4 8 ATBN 16-5 / ATBN 19-5 / ATBN 2-5 26 AH 11 32 2 32 2,2 1,6 15 24,8 5 ATBN 2-6 / ATBN 25-6 / ATBN 32-6 29 AH 11 32 3 32 3,1 2,4 15 24,8 1 ATBN 2-6 / ATBN 25-6 / ATBN 32-6 21 AH 11 32 4 32 4,1 3,2 15 24,8 1 ATBN 2-6 / ATBN 25-6 / ATBN 32-6 211 AH 11 32 5 32 5,1 4, 15 24,8 125 ATBN 2-6 / ATBN 25-6 / ATBN 32-6 212 AH 11 32 6 32 6,4 5,2 15 24,8 125 ATBN 2-6 / ATBN 25-6 / ATBN 32-6 213 18681 Clip holders A-CUT For cutting-o und grooving. For cutting inserts AIMC, AIMJ and AIPV (cat. no. 18687-18696). Tool holders should not be used or turning (please use tool holder cat. no. 18682). Ejector included, cutting inserts not included. D max H F W L Designation H W B L F max. workpiece Ø 18681 18681 mm mm mm mm mm mm AHR/L 21 1212 2 12 2,2 12 11 11,2 32 21 31 AHR/L 21 1212 3 12 3,1 12 11 1,8 32 22 32 AHR/L 21 1616 2 16 2,2 16 11 15,2 32 23 33 AHR/L 21 1616 3 16 3,1 16 11 14,8 35 24 34 AHR/L 21 22 2 2 2,2 2 11 19,2 35 26 36 AHR/L 21 22 3 2 3,1 2 12 18,8 52 27 37 AHR/L 21 22 4 2 4,1 2 12 18,4 57 28 38 AHR/L 21 2525 3 25 3,1 25 15 23,8 56 29 39 AHR/L 21 2525 4 25 4,1 25 15 23,4 65 21 31 H B 18681 18682 For cutting-o, grooving and turning. For cutting inserts AIMC, AIMJ and AIPV (cat. no. 18687-18696). Clip holders A-CUT H T 45 L Cutting inserts AIMC and AIMJ (cat. no. 18687-18692) should only be used or grooving operations. Cutting inserts not included. Clamping screw see cat. no. 18685. F W B Designation H W B L F T Clamping Screw 18682 18682 mm mm mm mm mm mm AHR/L 211 1616 3 16 3,1 16 1 14,7 9,9 M5 x 16 21 31 AHR/L 211 1616 4 16 4,1 16 1 14,2 13, M5 x 16 22 32 AHR/L 211 22 3 2 3,1 2 125 18,7 9,9 M5 x 2 23 33 AHR/L 211 22 4 2 4,1 2 125 18,2 13, M5 x 2 24 34 AHR/L 211 2525 3 25 3,1 25 15 23,7 9,9 M5 x 2 25 35 AHR/L 211 2525 4 25 4,1 25 15 23,2 13, M5 x 25 26 36 AHR/L 211 2525 5 25 5,1 25 15 22,7 13, M5 x 25 27 37 AHR/L 211 2525 6 25 6,4 25 15 22,2 16, M5 x 25 28 38 H 18682 18.8 Fax order hotline: +49 624 739-1217

18684 With internal coolant low. Seal thread R 1/8. When using the seal, the boring bar can be shortened by max. 1 mm. For internal turning and grooving. For cutting inserts AIMC, AIMJ and AIPV (cat. no. 18687-18696). Boring bars A-CUT with IK Cutting inserts AIMC and AIMJ (cat. no. 18687-18692) should only be used or grooving operations. For optimum results, the cutting edge should be positioned above centre by C mm. Delivery complete with clamping screws (cat. no. 18685), TORX wrench T2 and seal, without Cutting inserts. 18684 (1) Seal thread (2) Seal Designation D smallest borehole Ø Tmax C W F L 1 L2 H Clamping 18684 18684 mm mm mm mm mm mm mm mm mm screw AHR/L 619 25C 2 25 35 6,5,3 2,2 2, 2 51, 11,5 SR 76-121 21 31 AHR/L 619 25C 3 25 47 8,,5 3,1 2,8 2 51, 11,5 SR 76-122 22 32 AHR/L 619 25C 4 25 47 8,,5 4,1 2,8 2 51, 11,5 SR 76-122 23 33 AHR/L 619 32C 2 32 43 7,5,3 2,2 25, 25 63,5 14,5 SR 76-122 24 34 AHR/L 619 32C 3 32 52 1,,5 3,1 26,6 25 57, 14,5 SR 76-122 25 35 AHR/L 619 32C 4 32 52 1,,5 4,1 26,6 25 51, 14, SR 76-122 26 36 AHR/L 619 4C 4 4 47 12,,5 4,1 33, 3 51, 18, SR 76-122 21 31 18685 Spare clamping screw or A-CUT holder For A-CUT tool holder, cat. no. 18682 and A-CUT boring bars, cat. no. 18684 18685 Designation 18685 a M5 x 16 hexagon socket 1 pcs. 11 M5 x 2 hexagon socket 1 pcs. 12 M5 x 25 hexagon socket 1 pcs. 13 M6 x 25 hexagon socket 1 pcs. 14 SR 76-121 TORX 1 pcs. 15 SR 76-122 TORX 1 pcs. 16 18687-18689 With chip breaker geometry C (strong cutting edge). Cutting insert A-CUT AIMC For cutting-o and grooving most types o steel materials, alloyed steel and stainless steel. For hard materials under tough conditions at medium to high eeds. 18687-18689 NK PMK P Carbide type HW 341 HC 3635 HC 363 Coating Uncoated Coated Coated W+/-,1 K R 18687 18688 18689 mm Degree mm a AIMC 1.6 1,6,16 5 pcs. 31 51 AIMC 2 2,2,2 5 pcs. 32 42 52 AIMC 2 6L 2,2 6,2 5 pcs. 33 53 AIMC 2 6R 2,2 6,2 5 pcs. 34 54 AIMC 3 3,1,2 5 pcs. 35 45 55 AIMC 3 6L 3,1 6,2 5 pcs. 36 46 56 AIMC 3 6R 3,1 6,2 5 pcs. 37 47 57 AIMC 4 4,1,25 5 pcs. 38 48 58 AIMC 4 6L 4,1 6,25 5 pcs. 39 59 AIMC 4 6R 4,1 6,25 5 pcs. 31 51 AIMC 5 5,1,3 5 pcs. 311 411 511 AIMC 5 6L 5,1 6,3 5 pcs. 312 512 AIMC 5 6R 5,1 6,3 5 pcs. 313 513 AIMC 6 6,4,35 5 pcs. 314 414 514 AIMC 6 6L 6,4 6,35 5 pcs. 315 515 AIMC 6 6R 6,4 6,35 5 pcs. 316 516 neutral Lethand Righthand Fax order hotline: +49 624 739-1217 18.81

Cutting-O and Grooving Tools 1869-18692 Cutting insert A-CUT AIMJ With chip breaker geometry J (cutting edge with positive rake angle). For cutting o and grooving or carbon steel, alloyed steel, and austenitic, stainless steel in general tasks with low eed rates. For sot materials, small diameters and thin-walled parts. neutral Lethand Righthand 1869-18692 NK PMK P Carbide type HW 341 HC 3635 HC 363 Coating Uncoated Coated Coated W+/-,1 K R 1869 18691 18692 mm Degree mm a AIMJ 2 2,2,2 5 pcs. 31 41 51 AIMJ 2 6L 2,2 6,2 5 pcs. 32 42 52 AIMJ 2 6R 2,2 6,2 5 pcs. 33 43 53 AIMJ 3 3,1,2 5 pcs. 34 44 54 AIMJ 3 6L 3,1 6,2 5 pcs. 35 45 55 AIMJ 3 6R 3,1 6,2 5 pcs. 36 46 56 AIMJ 4 4,1,25 5 pcs. 37 47 57 AIMJ 4 6L 4,1 6,25 5 pcs. 38 48 58 AIMJ 4 6R 4,1 6,25 5 pcs. 39 49 59 AIMJ 5 5,1,3 5 pcs. 31 51 18695 with chip breaker geometry V (multi-directional chip delection step). For machining o precision grooves, or ree turning and or proile operations. Schneideinsätze A-CUT AIPV R W 18695 R PMK Carbide type HC 3635 Coating Coated Designation W +/-,2 R 18695 mm mm a AIPV 3.E.4 3,4 5 pcs. 21 AIPV 4.E.4 4,4 5 pcs. 22 AIPV 6.E.4 6,4 5 pcs. 24 18696 Cutting insert A-CUT AIPV with chip breaker geometry V (multi-directional chip delection step). For machining o Seeger circlip grooves. PMK Carbide type HC 3635 Coating Coated Designation W +/-,2 R 18696 mm mm a AIPV 1.85.1 1,85,1 5 pcs. 21 AIPV 2..2 2,,2 5 pcs. 22 AIPV 2.15.15 2,15,15 5 pcs. 23 AIPV 2.65.15 2,65,15 5 pcs. 24 W R PMK Carbide type HC 3635 Coating Coated Designation W +/-,2 R 18695 mm mm a AIPV 3.E 1.5 3 1,5 5 pcs. 25 AIPV 4.E 2. 4 2, 5 pcs. 26 AIPV 6.E 3. 6 3, 5 pcs. 28 18696 PMK Carbide type HC 3635 Coating Coated Designation W +/-,2 R 18696 mm mm a AIPV 3..2 3,,2 5 pcs. 25 AIPV 4..2 4,,2 5 pcs. 27 AIPV 4.15.15 4,15,15 5 pcs. 28 18.82 Fax order hotline: +49 624 739-1217

187. For machining o diameters 35-7 mm. For cutting insert AIMF (cat. no. 1871). Cutting inserts not included. Recessing blades or axial grooving A-Cut C T ØD W W A B B1 187 Designation or cutting insert W B min-max ØD Tmax A B1 C 187 mm mm mm mm mm mm mm AH 16 35R-2 AIMF 2N 2,1 32 35-46 2 5,2,8 15 21 AH 16 45R-2 AIMF 2N 2,1 32 45-61 2 5,2,8 15 22 AH 16 6R-2 AIMF 2N 2,1 32 6-8 2 5,2,8 15 23 AH 16 8R-2 AIMF 2N 2,1 32 79-12 2 4,,8 15 24 AH 16 1R-2 AIMF 2N 2,1 32 11-132 2 4, 15 25 AH 16 75R-3 AIMF 3N 3, 32 65-92 2 5,2 1, 15 26 AH 16 9R-3 AIMF 3N 3, 32 9-122 2 5,2,2 15 27 AH 16 12R-3 AIMF 3N 3, 32 12-16 25 5,2 15 28 AH 16 8R-4 AIMF 4N 4, 32 8-155 3 5,2 2,5 15 29 AH 16 15R-4 AIMF 4N 4, 32 15-5 3 5,2 2,5 15 21 AH 16 8R-5 AIMF 5N 5, 32 8-162 32 5,2 2,5 15 211 AH 16 15R-5 AIMF 5N 5, 32 15-6 35 5,2 2,5 15 212 AH 16 9R-6 AIMF 6N 6, 32 9-15 32 8, 2,5 15 213 AH 16 15R-6 AIMF 6N 6, 32 148-7 35 5,2 2,5 15 214 1871 With chip breaker geometry F. Specially or axial and on ace grooving. Cutting edge height at small diameters is centred in order to provide extension o grooves by a series o overlapping recesses. Ater the irst recess, the recess width can be enlarged in both directions. Cutting insert or axial grooving A-CUT AIMF AIMF cutting inserts are not exchangeable with AIMC, AIMJ, or AIPV cutting inserts (cat. no. 18687-18696). 1871 PMK Carbide type HC 363 Coating Coated Designation W +/-,1 R or ØD 1871 mm mm mm a AIMF 2N neutral 2,1,2 rom 35 5 pcs. 11 AIMF 3N neutral 3,,3 rom 54 5 pcs. 14 AIMF 4N neutral 4,,25 rom 35 5 pcs. 17 AIMF 5N neutral 5,,25 rom 4 5 pcs. 18 AIMF 6N neutral 6,,25 rom 44 5 pcs. 19 www.atorn.de Perormance requires quality. For example, with the solid carbide high-perormance ALUSPEED drill, rom ATORN. 6x guiding section Solid carbide Ultra inest grit Al-CC-coating to 8xD Twisted cooling channel Perormance requires quality. Fax order hotline: +49 624 739-1217 18.83

Ino Introduction o the T-Clamp system (cat. no. 1871-18762) The user guide provides basic inormation which enable the user to get to know all the advantages o the T-Clamp system. The T-clamp system permits multi-unctional applications in one system: deep grooving cutting o and grooving outside turning longitudinal turning and grooving precision grooving and removing o material axial grooving and acing outside grooving Cutting-o Cutting inserts repeatability sintered-in chip ormer one top and one bottom hal radius help positioning the cutting insert exactly and securely TDJ/C-multi-purpose, double-sided cutting insert or turning and grooving TSJ/C-multi-purpose, single-ended cutting insert or deep grooving and cutting-o TDT-multi-purpose, double-sided cutting insert or longitudinal turning and grooving One-part tool Longitudinal turning and Recessing easy, exact and secure positioning upper and lower guides o the cutting insert in holder no additional spare parts standard tool holders can be used Integrated tools with shank easy, exact and secure positioning upper and lower guides o the cutting insert in holder stable ooting against lateral orces no additional spare parts standard shank dimensions Axial grooving and acing Advantages o the T-clamp system T-Clamp is oered as double-sided or single-sided cutting insert or maximum economy multi-purpose use clockwise and counterclockwise turning, grooving and cutting-o with a single tool T-Clamp replaces one or more ISO tools it reduces the number o tools per machining operation less dierent types o inserts and tool holders in the magazine shorter setup time shorter times or adjustment and preparation reduces the necessity or turret indexing reduced machining times the extraordinary surace characteristics during roughing turning might replace the inishing 18.84 Fax order hotline: +49 624 739-1217

Ino T-clamp compared with the standard ISO system T-clamp system Standard ISO system Precision Recessing and cutting o Recessing Clockwise and counterclockwise turning Facing Recessing and cutting o turning turning Facing Recommended machine data Face turning Material Unalloyed steel,2%c,45%c,83%c Hardness Brinell HB 15 19 25 Alloyed steel < 2 2-25 275-325 325-375 375-425 Stainless steel Cast steel Malleable cast iron Cast iron Spheroidal graphite cast iron Martensite Austenite Carbon Alloy Short chipping Long chipping Low strength high strength Ferritic Pearlitic 175-225 275-325 135-175 - 15 15-2 2-25 11-145 2-25 18 25 16 25 H 2 H 45 9-1 7-9 115-14 8-1 85-15 8-1 Hardened cast iron 4 2 Bronze alloy Lead alloy Brass, red brass Phosphor-bronze Aluminium alloy Not heat-resistant Heat resistant Aluminium alloy, cast Magnesium Electrolytic copper 12-2 8-15 6-11 85-11 15-2 3-8 8-12 4-6 HRB 6-9 HRB 5-85 11-12 15-165 115-125 8-9 2-24 6-7 25-3 3-34 225-265 23-25 9-1 Cutting speed (m/min) 11-14 1-13 9-11 8-11 75-12 7-9 6-75 45-55 1-135 7-95 5-65 15-135 85-1 75-9 Fax order hotline: +49 624 739-1217 18.85

Cutting-O and Grooving Tools 1871 For clockwise and counterclockwise operation. For mounting cutting insert cat. no. 18747-1875. Cut-O and Deep Recessing Blades 1871 Basic tool holder or grooving blades see cat. no. 1867 24-26. B L H A W For cutting insert Dmax 1871 mm mm mm mm mm mm TGB 32-2 32 15 24,8 1,6 1,9-2,5 TDC/TDJ 4 11 TGB 32-3 32 15 24,8 2,4 2,4-3,3 TDC/TDJ/TSJ 5 12 TGB 32-4 32 15 24,8 3,2 3,2-4,3 TDC/TDJ/TSJ 1 13 TGB 32-5 32 15 24,8 4, 4,2-5,3 TDC/TDJ/TSJ 12 14 18711 For cut-o blades cat. no. 1871. Special wrench 18711 18711 11 18715-18716 For mounting cutting inserts cat.-no. 18747-18756 and 1876. Tool holders or Longitudinal Turning and Recessing 18715 H B L F E A W Tmax For cutting insert Screw size 18715 18716 mm mm mm mm mm mm mm mm TTER/L 1616-2 16 16 11 14,95 32 1,6 1,9-2,5 12 TDC/TDJ M 5 x,8 11 11 TTER/L 22-2 2 2 125 18,95 32 1,6 1,9-2,5 12 TDC/TDJ/TSJ/TDT M 5 x,8 12 12 TTER/L 2525-2 25 25 15 23,95 32 1,6 1,9-2,5 12 TDC/TDJ/TSJ/TDT M 5 x,8 13 13 TTER/L 1616-3 16 16 11 14,95 32 2,1 2,4-3,2 12 TDC/TDJ/TSJ/TDT M 5 x,8 14 14 TTER/L 22-3 2 2 125 18,95 32 2,1 2,4-3,2 12 TDC/TDJ/TSJ/TDT M 5 x,8 15 15 TTER/L 2525-3 25 25 15 23,95 32 2,1 2,4-3,2 12 TDC/TDJ/TSJ/TDT M 5 x,8 16 16 TTER/L 1616-4 16 16 11 14,55 32 2,9 3,2-4,2 15 TDC/TDJ/TSJ/TDT M 5 x,8 17 17 TTER/L 22-4 2 2 125 18,55 32 2,9 3,2-4,2 15 TDC/TDJ/TSJ/TDT M 5 x,8 18 18 TTER/L 2525-4 25 25 15 23,55 32 2,9 3,2-4,2 15 TDC/TDJ/TSJ/TDT M 5 x,8 19 19 TTER/L 22-5 2 2 125 18,5 37 3,9 4,2-5,2 2 TDC/TDJ/TSJ/TDT M 6 x 1, 11 11 TTER/L 2525-5 25 25 15 23,5 37 3,9 4,2-5,2 2 TDC/TDJ/TSJ/TDT M 6 x 1, 111 111 18719-1872 For mounting cutting insert cat. no. 18747-1876. Tool holders or External and Axial Recessing 18719 H B L F E Wmax Tmax Ø Dmin For cutting insert Screw size 18719 1872 mm mm mm mm mm mm mm mm TGFR/L 1616-4 16 16 11 14,55 32-4,3 6 3 TDC/TDJ/TSJ/TDT/TDFT-E M 5 x,8 11 11 TGFR/L 22-4 2 2 125 18,55 32-4,3 6 3 TDC/TDJ/TSJ/TDT/TDFT-E M 5 x,8 12 12 TGFR/L 2525-4 25 25 15 23,55 32-4,3 6 3 TDC/TDJ/TSJ/TDT/TDFT-E M 5 x,8 13 13 18.86 Fax order hotline: +49 624 739-1217

18723-18724 For mounting cutting inserts cat.-no. 18747 and 18758. Tool Holders or Longitudinal Turning and Axial grooving 18723 18724 H B L E Wmax Tmax Ø Dmin For cutting insert Screw size 18723 18724 mm mm mm mm mm mm mm TGFPR/L 2525-4 25 25 15 18-4,3 4,8 3 TDC/TDFT-E M 5 x,8 11 11 18727-18728 For mounting cutting insert cat. no. 18748-18756 and 1876. External Undercutting Tool Holders 18727 H B L F E A Wmax Tmax Ø Dmin For cutting insert Screw size 18727 18728 mm mm mm mm mm mm mm mm mm TGEUR/L 1616-3 16 16 11 17,3 3 1,5-3 2,8 32 TDJ/TSJ/TDT M 5 x,8 31 31 TGEUR/L 22-3 2 2 125 23,3 3 1,5-3 2,8 32 TDJ/TSJ/TDT M 5 x,8 32 32 TGEUR/L 2525-3 25 25 15 28,3 3 1,5-3 2,8 32 TDJ/TSJ/TDT M 5 x,8 33 33 TGEUR/L 1616-4 16 16 11 19,45 3 1,45-4 2,8 32 TDJ/TSJ/TDT M 5 x,8 34 34 TGEUR/L 22-4 2 2 125 23,45 3 1,45-4 2,8 32 TDJ/TSJ/TDT M 5 x,8 35 35 TGEUR/L 2525-4 25 25 15 28,45 3 1,45-4 2,8 32 TDJ/TSJ/TDT M 5 x,8 36 36 18731-18732 For mounting cutting insert cat. no. 18752-18758. Ø D mm = Diameter rang or axial grooving. Ater the clearance groove the diameter or ace turning is unlimited. Tool Holders or Axial Deep Recessing and Facing 18731 H B L F E W Tmax Ø D For cutting insert Screw size 18731 18732 mm mm mm mm mm mm mm mm TTFR/L 25-3-4 25 25 15 23,55 32 4 12 22-4 TDT/TDFT-E M 5 x,8 11 11 TTFR/L 25-4-4 25 25 15 23,55 32 4 15 32-5 TDT/TDFT-E M 5 x,8 12 12 TTFR/L 25-5-4 25 25 15 23,55 32 4 15 42-6 TDT/TDFT-E M 5 x,8 13 13 TTFR/L 25-6-4 25 25 15 23,55 32 4 15 52-85 TDT/TDFT-E M 5 x,8 14 14 18735-18736 Tool Holders or Axial Deep Recessing and Facing For mounting cutting insert cat. no. 18752-18758. Ø D mm = Diameter rang or axial grooving. Ater the clearance groove the diameter or ace turning is unlimited. 18736 H B L E W Tmax Ø D For cutting insert Screw size 18735 18736 mm mm mm mm mm mm mm TTFPR/L 25-3-4 25 25 15 18 4 12 22-4 TDT/TDFT-E M 5 x,8 31 31 TTFPR/L 25-4-4 25 25 15 18 4 15 32-5 TDT/TDFT-E M 5 x,8 32 32 TTFPR/L 25-5-4 25 25 15 18 4 15 42-6 TDT/TDFT-E M 5 x,8 33 33 TTFPR/L 25-6-4 25 25 15 18 4 15 52-85 TDT/TDFT-E M 5 x,8 34 34 Fax order hotline: +49 624 739-1217 18.87

Cutting-O and Grooving Tools 18739-1874 For mounting cutting insert cat. no. 18762. Boring Bars or Internal Turning and Recessing 18739 18739 1874 TTIR/L 2-3C 11 11 TTIR/L 2-4C 12 12 TTIR/L 25-4C 13 13 TTIR/L 25-5C 14 14 TTIR/L 32-5C 15 15 Ø d L L1 B H W A Tmax Ø Dmin For cutting Seal Seal Screw mm mm mm mm mm mm mm mm mm Inserts (1) thread (2) Size TTIR/L 2-3C 2 16 4 15,8 9, 3 2,1 6,5 25 TDIT-E PL2 M 6 M 5 x,8 TTIR/L 2-4C 2 16 4 15,8 9, 4 2,9 6,5 25 TDIT-E PL2 M 6 M 5 x,8 TTIR/L 25-4C 25 2 4 17,5 11,5 4 2,9 5,8 25 TDIT-E PL25 R 1/8 M 5 x,8 TTIR/L 25-5C 25 2 4 17,3 11,5 5 3,9 6,5 31 TDIT-E PL25 R 1/8 M 6 x 1, TTIR/L 32-5C 32 25 6 2,8 14, 5 3,9 6,5 31 TDIT-E PL32 R 1/8 M 6 x 1, 18743-18744 For mounting cutting inserts cat. no. 18752-18756 and 1876-18762. Boring Bars or Internal Undercutting 18743 Typ Ø d L L1 F H A W Tmax Ø Dmin For cutting Screws 18743 18744 mm mm mm mm mm mm mm mm mm inserts size TGIUR/L 2-3 2 16 12,8 9,5 1,5 3 2,8 38 TDT/TDIT-E M 5 x,8 11 11 TGIUR/L 25-3 25 2 4 14,8 11,5 1,5 3 2,8 38 TDT/TDIT-E M 5 x,8 12 12 TGIUR/L 2-4 2 16 12,9 9,5 1,45 4 2,8 38 TDT/TDIT-E M 5 x,8 13 13 TGIUR/L 25-4 25 2 4 14,9 11,5 1,45 4 2,8 46 TDT/TDIT-E M 5 x,8 14 14 18747 Two cutting blades, with chip ormer type -C-. For cut-o blade and tool holder cat. no. 1871-18724. Cutting Inserts TDC 18747 (1) = neutral, (2) = counterclockwise, (3) = right-hand, (4) = Tolerance +/-,1 mm. NK PK Carbide H 2 H 45 Typ W +/-,5 R L K H Tmax 18747 18747 mm mm mm mm a TDC 2 2,2 2 4,7 19 1 pcs. 11 21 TDC 2-6R 2,2 2 6 4,7 19 1 pcs. 22 TDC 2-6L 2,2 2 6 4,7 19 1 pcs. 13 23 TDC 3 3,2 2 4,7 19 1 pcs. 14 24 TDC 3-6R 3,2 2 6 4,7 19 1 pcs. 15 25 TDC 3-6L 3,2 2 6 4,7 19 1 pcs. 16 26 TDC 4 4,3 2 4,7 19 1 pcs. 17 27 TDC 4-4R 4,3 2 4 4,7 19 1 pcs. 18 28 TDC 4-4L 4,3 2 4 4,7 19 1 pcs. 19 29 TDC 5 5,3 25 5,2 24 1 pcs. 11 21 18.88 Fax order hotline: +49 624 739-1217

18748 Two cutting blades, with chip ormer type -J-. For cut-o blades and tool holders cat. no. 1871-1872 and 18727-18728. Double Ended Inserts TDJ (1) = neutral, (2) = counterclockwise, (3) = right-hand, (4) = Tolerance +/-,1 mm. NK PK Carbide H 2 H 45 W +/-,5 R L K H Tmax 18748 18748 mm mm mm mm a TDJ 2 2,2 2 4,7 19 1 pcs. 11 21 TDJ 2-6R 2,2 2 6 4,7 19 1 pcs. 12 22 TDJ 2-6L 2,2 2 6 4,7 19 1 pcs. 13 23 TDJ 3 3,2 2 4,7 19 1 pcs. 14 24 TDJ 3-6R 3,2 2 6 4,7 19 1 pcs. 15 25 TDJ 3-6L 3,2 2 6 4,7 19 1 pcs. 16 26 TDJ 4 4,3 2 4,7 19 1 pcs. 17 27 TDJ 4-4R 4,3 2 4 4,7 19 1 pcs. 18 28 TDJ 4-4L 4,3 2 4 4,7 19 1 pcs. 19 29 TDJ 5 5,3 25 5,2 24 1 pcs. 11 21 1875 Single lute, with chip ormer type -J-. For cut-o blades and tool holders cat. no. 1871-1872 and 18727-18728. Single Ended Inserts TSJ (1) = neutral, (2) = counterclockwise, (3) = right-hand, (4) = Tolerance +/-,1 mm. 18748 1875 NK PK Carbide H 2 H 45 W +/-,5 R L K H 1875 1875 mm mm mm a TSJ 3 3,2 2 4,7 1 pcs. 11 21 TSJ 3-6R 3,2 2 6 4,7 1 pcs. 12 22 TSJ 3-6L 3,2 2 6 4,7 1 pcs. 23 TSJ 4 4,3 2 4,7 1 pcs. 14 24 TSJ 4-4R 4,3 2 4 4,7 1 pcs. 25 TSJ 5 5,3 25 5,2 1 pcs. 17 27 18752 Precision Double Ended Inserts TDT-E Two cutting blades, with chip ormer type -T-. For tool holders cat. no. 18715-1872, 18727-18736 and 18743-18744. (1) = Tolerance +/-,25 mm. 18752 NK PMK Carbide H 2 H 42 W +/-,2 R +/-,5 B L H 18752 18752 mm mm mm mm a TDT 3.E-.4 3,4 2,2 2 4,7 1 pcs. 11 21 TDT 4.E-.4 4,4 3, 2 4,7 1 pcs. 12 22 TDT 4.E-.8 4,8 3, 2 4,7 1 pcs. 13 TDT 5.E-.4 5,4 4, 25 5,2 1 pcs. 14 24 TDT 5.E-.8 5,8 4, 25 5,2 1 pcs. 15 25 18754 Two cutting blades, with chip ormer type -T-. For tool holders cat. no. 18715-1872, 18727-18736 and 18743-18744. Double Ended Inserts TDT-E (1) = Tolerance +/-,1 mm. 18754 NK PMK Carbide H 2 H 42 W +/-,5 R B L H 18754 18754 mm mm mm a TDT 3E-.4 3,4 2,2 2 4,7 1 pcs. 11 21 TDT 4E-.4 4,4 3, 2 4,7 1 pcs. 12 22 Fax order hotline: +49 624 739-1217 18.89

Cutting-O and Grooving Tools 18756 Precision Double Ended Inserts TDT-E Two cutting blades, with chip ormer type -T-. For tool holders and boring bars cat. no. 18715-1872, 18727-18736 and 18743-18744. (1) = Tolerance +/-,25 mm. 18756 NK PMK Carbide H 2 H 42 W +/-,2 R +/-,5 B L H 18756 18756 mm mm mm mm a TDT 3.E-1.5 3 1,5 2,2 2 4,7 1 pcs. 11 21 TDT 4.E-2. 4 2, 3, 2 4,7 1 pcs. 12 22 TDT 5.E-2.5 5 2,5 4, 25 5,2 1 pcs. 13 23 18758 Two cutting blades, with chip ormer type -T-. For tool holder cat. no. 18719-18724 and 18731-18736. Double Ended Inserts TDFT-E (1) = Tolerance +/-,1 mm. 18758 NK PMK Carbide H 2 H 42 W +/-,2 R B L H 18758 18758 mm mm mm a TDFT 3E-.4R 3,4 2,2 2 4,7 1 pcs. 11 21 TDFT 3E-.4L 3,4 2,2 2 4,7 1 pcs. 12 22 TDFT 4E-.4R 4,4 3, 2 4,7 1 pcs. 13 23 TDFT 4E-.4L 4,4 3, 2 4,7 1 pcs. 14 24 1876 Two cutting blades, with chip ormer type -T-. For tool holders and boring bars cat. no. 18715-1872, 18727-18728 and 18739-18744. Precision Double Ended Inserts TDT (1) = Tolerance +/-,25 mm. 1876 NK PMK Carbide H 2 H 42 W +/-,2 R B L L1 H 1876 1876 mm mm mm mm mm a TDT 1.-. 1,, 2,2 2 2,5 4,7 1 pcs. 11 31 TDT 1.3-. 1,3, 2,2 2 2,5 4,7 1 pcs. 12 32 TDT 1.6-.1 1,6,1 2,2 2 2,5 4,7 1 pcs. 13 33 TDT 1.85-.1 1,85,1 2,2 2 3,5 4,7 1 pcs. 14 34 TDT 2.15-.15 2,15,15 2,2 2 3,5 4,7 1 pcs. 15 35 TDT 2.65-.15 2,65,15 2,2 2 5, 4,7 1 pcs. 16 36 TDT 3.15-.15 3,15,15 2,2 2 5, 4,7 1 pcs. 17 37 TDT 4.15-.15 4,15,15 3, 2 5, 4,7 1 pcs. 18 38 TDT 5.15-.15 5,15,15 4, 25 5, 5,2 1 pcs. 19 39 18762 Precision Double Ended Inserts TDIT-E Two cutting blades. For boring bars cat. no. 18739-18744. (1) = Tolerance +/-,25 mm. 18762 NK PMK Carbide H 2 H 42 W +/-,2 R +/-,5 B L H 18762 18762 mm mm mm mm a TDIT 3.E-.4 3,4 2,2 2 4,7 1 pcs. 11 31 TDIT 4.E-.4 4,4 3, 2 4,7 1 pcs. 12 32 TDIT 4.E-.8 4,8 3, 2 4,7 1 pcs. 13 33 TDIT 5.E-.4 5,4 4, 25 5,2 1 pcs. 14 34 TDIT 5.E-.8 5,8 4, 25 5,2 1 pcs. 15 35 18.9 Fax order hotline: +49 624 739-1217

1965-19651 Modular parting and grooving system MSS tool holders 1965 1965 Modular base holder MSS shank A - A* h 2 h 1 a l 2 l 3 l 1 b 1 b h 16 b h = h 1 = 16 h Size Designation h b b 1 h 2 l 1 l 2 1965 1965 mm mm mm mm mm mm mm 2 MSS-E2R/L-22J 2 2 2,1 24,3 24 11 2 11 21 25 MSS-E25R/L-2525L 25 25 25,5 31, 3 14 25 12 22 32 MSS-E32R/L-3225N 32 25 25,5 31, 38 16 32 13 23 19651 19651 h = h 1 Modular base holder MSS shank 9 h 2 h 1 a l 3 l 2 l 1 b h 9 Size Designation h b h 2 l 1 l 2 19651 19651 mm mm mm mm mm mm 2 MSS-E2R/L9-22J 2 2 2 24 11 2 11 21 25 MSS-E25R/L9-2525L 25 25 25 3 14 28 12 22 32 MSS-E32R/L9-3225N 32 25 32 38 16 34 13 23 Spare parts Clamping screw For Clamping screw 19699 Size 2 M 4 X 14 11 25 M 5 x 18 12 32 M 6 X 2 13 The modular grooving and threading system Modern tools are modularly structured in order to cover the diversity o requirements in its totality. System unctions: - Shank and insert holder are separated - Uniorm separating point or grooving and threading applications - Stable, precise connection - Can be extended with new modules - Easy handling - Application-optimised clamping unction > Flexibility > Precision > Stability > Simplicity > Proitability > Completeness Fax order hotline: +49 624 739-1217 18.91

R Cutting-O and Grooving Tools 19653-19658 Recessing inserts GX/SX outside or modular grooving system MSS 19653 19653 T max Inserts GX 16 (without grooving indexable inserts) s h 2 h 1 l 1 Size Designation Tmax l 1 h 1 h 2 R Indexable inserts 19653 19653 mm mm mm mm mm mm 2 MSS-E2R/L12-GX16-1 12 3,74 13 2 24 3, GX16-1.. 11 21 2 MSS-E2R/L12-GX16-2 12 3,4 13 2 24 3, GX16-2.. 12 22 2 MSS-E2R/L12-GX16-3 12 2,93 13 2 24 3, GX16-3.. 13 23 25 MSS-E25R/L12-GX16-1 12 5,25 13 25 3 37,5 GX16-1.. 14 24 25 MSS-E25R/L12-GX16-2 12 4,9 13 25 3 37,5 GX16-2.. 15 25 25 MSS-E25R/L12-GX16-3 12 4,43 13 25 3 37,5 GX16-3.. 16 26 25 MSS-E25R/L12-GX16-4 12 3,8 13 25 3 37,5 GX16-4.. 17 27 19654 T max 19654 Inserts GX 24 (without grooving indexable inserts) R s h 2 h 1 l 1 Size Designation Tmax l 1 h 1 h 2 R Indexable inserts 19654 19654 mm mm mm mm mm mm 2 MSS-E2R/L21-GX24-2 21 3,4 22 2 24 3, GX24-2.. 11 21 2 MSS-E2R/L21-GX24-3 21 3, 22 2 24 3, GX24-3.. 12 22 25 MSS-E25R/L21-GX24-2 21 4,9 22 25 3 37,5 GX24-2.. 13 23 25 MSS-E25R/L21-GX24-3 21 4,43 22 25 3 37,5 GX24-3.. 14 24 25 MSS-E25R/L21-GX24-4 21 3,8 22 25 3 37,5 GX24-4.. 15 25 32 MSS-E32R/L21-GX24-2 21 4,95 22 32 38 48, GX24-2.. 16 26 32 MSS-E32R/L21-GX24-3 21 4,43 22 32 38 48, GX24-3.. 17 27 32 MSS-E32R/L21-GX24-4 21 3,8 22 32 38 48, GX24-4.. 18 28 19655 19655 Inserts GX 24 axial (without grooving indexable inserts) h 2 D l1 s h 1 T max Size Designation Tmax l 1 h 1 h 2 Dmin Dmax Indexable inserts 19655 19655 mm mm mm mm mm mm mm 25 MSS-E25R/L15-GX24-2 A5-7 15 4,9 22 25 3 5 7 GX24-2.. 11 21 25 MSS-E25R/L15-GX24-2 A7-1 16 4,9 22 25 3 7 1 GX24-2.. 12 22 25 MSS-E25R/L15-GX24-2 A1-15 17 4,9 22 25 3 1 15 GX24-2.. 13 23 25 MSS-E25R/L15-GX24-3 A5-7 15 4,43 22 25 3 5 7 GX24-3.. 14 24 25 MSS-E25R/L15-GX24-3 A7-1 15 4,43 22 25 3 7 1 GX24-3.. 15 25 25 MSS-E25R/L15-GX24-3 A1-15 15 4,43 22 25 3 1 15 GX24-3.. 16 26 25 MSS-E25R/L15-GX24-3 A15-3 15 4,43 22 25 3 15 3 GX24-3.. 17 27 continuation. 18.92 Fax order hotline: +49 624 739-1217

s 19653-19658 Continuation. 19656 Recessing inserts GX/SX or modular grooving system MSS 19656 Inserts GX 24 axial long (without grooving indexable inserts) Axial modules in long can be clamped in on both sides. h 2 h 1 D l 1 T max Size Designation Tmax l 1 h 1 h 2 Dmin Dmax Indexable 19656 19656 mm mm mm mm mm mm mm inserts 25 MSS-E25R/L21-GX24-3 AS5-7 21 4,43 35 25 3 5 7 GX24-3.. 11 21 25 MSS-E25R/L21-GX24-3 AS7-1 21 4,43 35 25 3 7 1 GX24-3.. 12 22 25 MSS-E25R/L21-GX24-3 AS1-15 21 4,43 35 25 3 1 15 GX24-3.. 13 23 25 MSS-E25R/L21-GX24-3 AS15-3 21 4,43 35 25 3 15 3 GX24-3.. 14 24 25 MSS-E25R/L25-GX24-4 AS5-7 25 3,8 35 25 3 5 7 GX24-4.. 15 25 25 MSS-E25R/L25-GX24-4 AS7-1 25 3,8 35 25 3 7 1 GX24-4.. 16 26 25 MSS-E25R/L25-GX24-4 AS1-15 25 3,8 35 25 3 1 15 GX24-4.. 17 27 25 MSS-E25R/L25-GX24-4 AS15-3 25 3,8 35 25 3 15 3 GX24-4.. 18 28 19658 19658 T max R Inserts SX outside (without grooving indexable insert) h 2 h 1 a s l 1 Size Designation S Tmax l 1 h 1 h 2 R a Indexable 19658 19658 mm mm mm mm mm mm mm mm inserts 2 MSS-E2R/L2-SX2 2 2 3,57 22 2 24 3, 3 SX..2 11 21 2 MSS-E2R/L2-SX3 3 2 3,2 22 2 24 3, 3 SX..3 12 22 25 MSS-E25R/L2-SX2 2 2 5,7 22 25 3 37,5 - SX..2 13 23 25 MSS-E25R/L25-SX3 3 25 4,7 27 25 3 37,5 - SX..3 14 24 25 MSS-E25R/L35-SX3 4 35 4,7 37 25 3 37,5 - SX..3 15 25 25 MSS-E25R/L25-SX4 4 25 4,3 27 25 3 37,5 - SX..4 16 26 25 MSS-E25R/L35-SX4 4 35 4,3 37 25 3 37,5 - SX..4 17 27 L ARGE SELECT ION EASY SEARC H D on t orget! CATA ALOG UE VOLUME [2] The universal catalogue or tools and machines. Fax order hotline: +49 624 739-1217 18.93

Cutting-O and Grooving Tools 1966-19661 Modular cutting-o and grooving system MSS boring bars 1966 1966 Modular cutting-o and grooving system MSS boring bar 1,5 x D * T max D d A l 2 h h l 1 Size Designation l 2 d 1 d 2 l 1 l 3 T max D min Insert 1966 1966 mm mm mm mm mm mm mm mm 16 MSS-I16R/L9-1.5D-N 24 2 25 1, 82 5 4 2 MSS-I16R/L 11 21 2 MSS-I2R/L9-1.5D-N 3 2 25 1, 87 5 5 25 MSS-I2R/L 12 22 25 MSS-I25R/L9-1.5D-N 38 25 32 1,5 12 56 6 32 MSS-I25R/L 13 23 32 MSS-I32R/L9-1.5D-N 48 32 4 2, 119 6 9 4 MSS-I32R/L 14 24 19661 19661 Modular cutting-o and grooving system MSS boring bar 2,5 x D D d A T max d 2 l 2 l 3 l 1 Size Designation l 2 d 1 l 1 T max D min Insert 19661 19661 mm mm mm mm mm mm 16 MSS-I16R/L9-2.5D-N 4 2 4,5 18 4 2 MSS-I16R/L 11 21 2 MSS-I2R/L9-2.5D-N 5 25 6, 2 5 25 MSS-I2R/L 12 22 25 MSS-I25R/L9-2.5D-N 63 32 7, 25 6 32 MSS-I25R/L 13 23 32 MSS-I32R/L9-2.5D-N 8 4 9,5 3 9 4 MSS-I4R/L 14 24 Spare parts Clamping screw For Clamping screw 19699 Size 16 M 2,5 x 1, 14 2 M 3, X 11, 15 25 M 3,5 x 12,5 16 32 M 4,5 X 17, 17 18.94 Fax order hotline: +49 624 739-1217

19663-19664 Recessing inserts GX inside or modular grooving system MSS 19663 19663 T max Inserts GX 9 (without grooving indexable inserts) D min s s 1 h 2 Size Designation Tmax s 1 h 2 D min Indexable 19663 19663 mm mm mm mm mm inserts 16 MSS-I16R/L4-GX9-1 4 1, 3,8 16,4 2 GX9-1.. 11 21 16 MSS-I16R/L4-GX9-2 4 1, 3,8 16,4 2 GX9-2.. 12 22 2 MSS-I2R/L5-GX9-1 5 12, 3,8 2,4 25 GX9-1.. 13 23 2 MSS-I2R/L5-GX9-2 5 12, 3,8 2,4 25 GX9-2.. 14 24 25 MSS-I25R/L6-GX9-1 6 15,5 3,8 24,9 32 GX9-1.. 15 25 25 MSS-I25R/L6-GX9-2 6 15,5 3,8 24,9 32 GX9-2.. 16 26 19664 T max 19664 Inserts GX 16 (without grooving indexable inserts) h 2 D min Size Designation Tmax s 1 h 2 D min Indexable 19664 19664 mm mm mm mm mm inserts 32 MSS-I32R/L9-GX16-1 9 2 5,9 32,2 4 GX16-1.. 11 21 32 MSS-I32R/L9-GX16-2 9 2 5,9 32,2 4 GX16-2.. 12 22 32 MSS-I32R/L9-GX16-3 9 2 5,9 32,2 4 GX16-3.. 13 23 32 MSS-I32R/L9-GX16-4 9 2 5,9 32,2 4 GX16-4.. 14 24 s 1 s Ino Modular parting and grooving system MSS description H216T HW-K15 Ductility 2 4 6 8 1 Wear resistance 2 4 6 8 1 Characteristics/application: Ideally suited or aluminium High wear resistance High temperature stability Minimal adhesion tendency CTCP335 HC-P35 HC-M3 HC-K35 CTP134 HC-P3 HC-M25 HC-K3 Ductility 2 4 6 8 1 Wear resistance 2 4 6 8 1 Ductility 2 4 6 8 1 Wear resistance 2 4 6 8 1 Characteristics/application: Excellent wear resistance Good oxidation resistance High ductility Good temperature stability Characteristics/application: Excellent all-round type Ideal or stainless steels High cutting edge stability Fax order hotline: +49 624 739-1217 18.95

1 Cutting-O and Grooving Tools Threading lathe tools 1967-19672 Cutting inserts or modular grooving system MSS 1967 1967 Cutting inserts or system GX-E - 27P - M4 PMKS N Carbide type CTP134 H216T Coating PVD Uncoated Designation s l r a max 1967 1967 mm mm mm mm a GX9-1E2.N.2-M4 2 9,2 1,5 1 pcs. 11 GX9-2E3.N.3-M4 3 9,3 2, 1 pcs. 12 GX16-1E2.N.2-27P 2 16,2 2, 1 pcs. 21 GX16-1E2.N.2-M4 2 16,2 2, 1 pcs. 13 GX16-2E3.N.3-27P 3 16,3 3, 1 pcs. 22 GX16-2E3.N.3-M4 3 16,3 3, 1 pcs. 14 GX16-3E4.N.4-27P 4 16,4 3,5 1 pcs. 23 GX16-3E4.N.4-M4 4 16,4 3,5 1 pcs. 15 GX24-2E3.N.3-27P 3 24,3 3,5 1 pcs. 24 GX24-2E3.N.3-M4 3 24,3 3,5 1 pcs. 16 GX24-3E4.N.4-27P 4 24,4 4, 1 pcs. 25 GX24-3E4.N.4-M4 4 24,4 4, 1 pcs. 17 19671 19671 Cutting inserts or system SX - 27P - M2 PMKS N Carbide type CTP134 H216T Coating PVD Uncoated Designation s l r a max 19671 19671 mm mm mm mm a SX E2.N.2-27P 2 11,2 1,5 1 pcs. 21 SX E2.N.2-M2 2 11,2 1,5 1 pcs. 11 SX E3.N.3-27P 3 11,3 2, 1 pcs. 22 SX E3.N.3-M2 3 11,3 2, 1 pcs. 12 SX E4.N.4-27P 4 13,4 2,5 1 pcs. 23 SX E4.N.4-M2 4 13,4 2,5 1 pcs. 13 6 r s a max r 19672 19672 Cutting inserts or system GX-R - M3 PMKS PK Carbide type CTP134 CTCP335 Coating PVD Ti(C,N)+Al2O3 Designation s l r a max 19672 19672 mm mm mm mm a GX16-2R1.5N 3 16, 1,5 1,5 1 pcs. 11 GX16-3R2.N 4 16, 2, 2, 1 pcs. 12 GX16-3R2.5N 5 16, 2,5 2,5 1 pcs. 13 GX24-2R1.5N-M3 3 24,4 1,5 1,5 1 pcs. 21 GX24-3R2.N-M3 4 24,4 2, 2,5 1 pcs. 22 GX24-3R3.N-M3 5 24,4 2,5 3, 1 pcs. 23 s 1 6 a max r l 18.96 Fax order hotline: +49 624 739-1217

18765-18767 Solid tool holder o 42 CrMo4V quenched and tempered to approx. 1.3 N/mm 2. Through powerul clamping element guided by two cylinder pins. Tool holders or grooving system DED For three-edged indexable inserts (cat. no. 18768-1877). 18765-18766 Holder R/L..1-D grooving depth to 4 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18765 18765 mm mm mm mm mm R/L 27.1212.1-D 12 12 1 24 4 DED... / DED.1.. 11 21 R/L 27.1616.1-D 16 16 125 22 4 DED... / DED.1.. 12 22 R/L 27.22.1-D 2 2 125 21 4 DED... / DED.1.. 13 23 R/L 27.2525.1-D 25 25 15-4 DED... / DED.1.. 14 24 Holder R/L..2-D grooving depth to 6 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18765 18765 mm mm mm mm mm R/L 27.1212.2-D 12 12 1 24 6 DED.2.. 15 25 R/L 27.1616.2-D 16 16 125 22 6 DED.2.. 16 26 R/L 27.22.2-D 2 2 125 21 6 DED.2.. 17 27 R/L 27.2525.2-D 25 25 15-6 DED.2.. 18 28 Holder R/L..3-D grooving depth to 6 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18765 18765 mm mm mm mm mm R/L 27.1212.3-D 12 12 1 24 6 DED.3.. 19 29 R/L 27.1616.3-D 16 16 125 22 6 DED.3.. 11 21 R/L 27.22.3-D 2 2 125 21 6 DED.3.. 111 211 R/L 27.2525.3-D 25 25 15-6 DED.3.. 112 212 Holder R/L..4-D grooving depth to 6 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18765 18765 mm mm mm mm mm R/L 27.1616.4-D 16 16 125 22 6 DED.4.. / DED.5.. 113 213 R/L 27.22.4-D 2 2 125 21 6 DED.4.. / DED.5.. 114 214 R/L 27.2525.4-D 25 25 15-6 DED.4.. / DED.5.. 115 215 Holder R/L..2-D grooving depth to 8 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18766 18766 mm mm mm mm mm R/L.78.22.2D 2 2 125 24 8 DED.2.. 11 21 R/L.78.2525.2D 25 25 15-8 DED.2.. 12 22 R/L.78.3232.2D 32 32 17-8 DED.2.. 13 23 Holder R/L..3-D grooving depth to 8 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18766 18766 mm mm mm mm mm R/L.78.22.3D 2 2 125 24 8 DED.3.. 14 24 R/L.78.2525.3D 25 25 15-8 DED.3.. 15 25 R/L.78.3232.3D 32 32 17-8 DED.3.. 16 26 Holder R/L..4-D grooving depth to 8 mm Designation H +/-,1 B +/-,1 L1 L2 T max. For grooving inserts 18766 18766 mm mm mm mm mm R/L.78.22.4D 2 2 125 24 8 DED.4.. / DED.5.. 17 27 R/L.78.2525.4D 25 25 15-8 DED.4.. / DED.5.. 18 28 R/L.78.3232.4D 32 32 17-8 DED.4.. / DED.5.. 19 29 Spare parts Clamping screw Guide pin Clamping claw Clamping claw For holders 18767 18767 18767 18767 R/L 27...1.2.3.4-D 11 12 R/L.78...2.3.4-D 11 12 R/L 27...1.2.3-D 13 15 R/L.78...2.3.-D 13 15 R/L 27...4-D 14 16 R/L.78...4.-D 14 16 see next page or suitable inserts. Fax order hotline: +49 624 739-1217 18.97

Threading lathe tools 18768-1877 Indexable inserts or grooving system DED - 3 cutting edges - Sintered type - Positive, ground cutting geometries - Extremely sot cut 18768 - For circlip grooves in accordance with DIN 471/472 - Low cutting orces - Grooving insert with chip breaker - High thermal and chemical stability - Low coeicients o riction Universal implementation o virtually all materials. Can be used with limitation or dry machining. Quality Carbide inest grit HC 862/TiAlN-coated. Designation Groove dimension S -,5 Relie angle alpha Relie angle alpha a +/-,2 For 18768 mm mm Bottom Top mm Tool holder type DED.5.-D,5,57,5 1,7 R/L..1-D 11 DED.6.-D,6,67,5 1,7 R/L..1-D 12 DED.7.-D,7,77,5 1,8 R/L..1-D 13 DED.8.-D,8,87,5 1,8 R/L..1-D 14 DED.9.-D,9,97,5 1,8 R/L..1-D 15 DED.1.-D 1, 1,7,5 1,9 R/L..1-D 16 DED.11.-D 1,1 1,24 3 3,15 R/L..1-D 17 DED.13.-D 1,3 1,44 3 3,15 R/L..1-D 18 DED.16.-D 1,6 1,74 3 3,2 R/L..1-D 11 DED.185.-D 1,85 1,99 3 3,2 R/L..1-D 111 DED.215.-D 2,15 2,29 3 3,2 R/L..2-D 113 DED.265.-D 2,65 2,79 3 3,2 R/L..2-D 115 DED.315.-D 3,15 3,29 3 3,2 R/L..3-D 117 DED.415.-D 4,15 4,29 3 3,2 R/L..4-D 119 DED.515.-D 5,15 5,29 3 3,2 R/L..4-D 12 18769 - For copy turning and ine turning Designation S +,3 r Relie angle alpha Relie angle alpha For 18769 mm mm Bottom Top Tool holder type DED.15.2-D 1,5,2 4 3 R/L..1-D 11 DED.2.2-D 2,,2 4 3 R/L..1-D 12 DED.2.4-D 2,,4 4 3 R/L..1-D 13 DED.3.2-D 3,,2 4 3 R/L..2-D 15 DED.3.6-D 3,,6 4 3 R/L..2-D 16 DED.3.8-D 3,,8 4 3 R/L..2-D 17 DED.4.2-D 4,,2 4 3 R/L..3-D 19 DED.4.8-D 4,,8 4 3 R/L..3-D 11 DED.4.12-D 4, 1,2 4 3 R/L..3-D 111 1877 11-14 - Full radius or groove turning,5 to 1,6 mm grooving width Designation S +/-,5 r T For 1877 mm mm mm Tool holder type DED.2.5-D,5,25,2 R/L..1-D 11 DED.5.1-D 1,,5,35 R/L..1-D 12 DED.6.12-D 1,2,6,4 R/L..1-D 13 DED.8.16-D 1,6,8,55 R/L..1-D 14 1877 16-11 - Full radius or groove turning 2, to 5, mm grooving width Designation S +/-,5 r T For 1877 mm mm mm Tool holder type DED.1.2-D 2, 1,,7 R/L..2-D 16 DED.12.25-D 2,5 1,25,85 R/L..2-D 17 DED.15.3-D 3, 1,5 1, R/L..3-D 18 DED.2.4-D 4, 2, 1,2 R/L..4-D 19 DED.25.5-D 5, 2,5 1,5 R/L..4-D 11 18.98 Fax order hotline: +49 624 739-1217