Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive line up of aerofoil section Rapier plate and short case axials now extending up to 1mm. For heavy duty applications the New Aerofoil Long Cased axials have all the rugged features you would expect: hot dip galvanised long cases, rolled flanges, heavy duty aluminium aerofoil section adjustable blades and a choice of blade angles and sizes from 315mm 125mm. What s more, non-stock models are normally available within two weeks. Whatever the ducted application, Xpelair has fresh product ideas and all the accessories too. Whether it be controllers or ducting accessories, it s all presented for easy selection. Need something different? If you still can t find your perfect system then contact Xpelair CustomVent Division where we specialise in bespoke solutions. Further details on page 288. How to use the Quick selector. Xpelair Axial range fan performances are in the table opposite. Select the duty and features you require and then turn to the relevant pages indicated for full product details. 12
Product selector Scimitar XPMS Rapier XPMA Scimitar XSCS Rapier XSCA Aerofoil XLCA Page Number 16 114 13 138 152 Fan type Sickle blade Plate mounted Sickle blade Short case Long case plate mounted axial short case axial axial axial Models 14 26 14 24 259 Max diameter (mm) 63 1 63 1 125 Max extract rate (m 3 /s) 3.4 13.89 3.4 13.89. Phase Single Single & three Single Single & three Single & three No. poles 2, 4, 6 2, 4, 6, 8 2, 4, 6 2, 4, 6 2, 4, 6 Xpelair Axial inlines 13
Xpelair Scimitar XPMS Sickle blade plate fans NEW Key features The Range Application: Type: Control options: Plate mounted Sickle bladed Electronic / 5 step transformer speed controller Xpelair introduces a new generation of sickle blade fans designed for a wide range of commercial and industrial ventilation applications. The blade design optimises airflow performance whilst minimising sound levels. The blades are directly mounted to capacitor start and run external rotor motors and then dynamically balanced. The robust wall plate incorporates a bellmouth entry and four fixing points for simple installation. And for safety a roomside protective finger guard is fitted as standard. The Scimitar range can be installed at any angle and is fully speed controllable. Specification Fan Plate Pressed galvanised steel wall plate incorporating a full bellmouth and four fixing points. An inlet protection finger guard is a welded wire framework to DIN EN294. The assembly is treated with two coat plastic corrosion resistant paint to RAL 95 Black. Motor/ impeller Designed to form a compact aerodynamically efficient unit. The die cast aluminium alloy drive motor is a 1% variable-speed controllable external rotor motor which simultaneously constitutes the fan's hub ensuring the motor is effectively cooled by the passing airflow. Motors are either class B or F with protection to IP44 or IP54. The motors feature maintenance free ball bearings with high temperature grease for temperatures from -3ºC to a maximum of +7ºC (dependant on model). Sickle bladed impellers are pressed steel. The motor / impellers are balanced in two planes to DIN ISO 19 part1: 1986 grade G 6.3. TK thermal protection is provided. Electrical supply 2-2V single phase 5Hz. Terminal Boxes and control Terminal box is to IP54. A range of 5 step transformer speed controllers are available. A starter with overload protection may also be used. 14
Performance Data MODEL XPMS25-12 XPMS315-12 XPMS25-14 XPMS315-14 XPMS355-14 XPMS-14 XPMS45-14 Reference number 91524AA 91526AA 91525AA 91527AA 91529AA 9153AA 91532AA Fan blade diameter (mm) 25 315 25 315 355 45 No. poles 2 2 4 4 4 4 4 Nominal fan speed (rpm) 25 1 141 1365 1 1 Airflow (FID, m 3 /s) Pa.5 1.6.27.68.9 1.39 1.87 25Pa.45 1.3.19.62.78 1.26 1.76 5Pa..99.11.49.69 1.15 1.63 75Pa.38.94.7.3.56 1.3 1.52 1Pa.25.9.83 1.39 125Pa.87.47 1.21 15Pa.82.9 175Pa.78 Pa.73 225Pa.55 25Pa.35 275Pa.25 Sound pressure level (db(a) @3m) 68 44 54 54 61 67 Max electrical power (W) 1 3 47 1 1 3 47 Full load current (A). 1.58.21.56.78 1.35 2. Starting current (A).88 3.7.34 1. 1. 2. 5.3 Motor insulation class B B B B F F F IP rating IP44 IP44 IP44 IP44 IP44 IP44 IP54 Max operating temperature (ºC) 45 55 7 Weight (kg) 3.8 5.8 3.4 5.5 6.8 7.3 9.6 MODEL XPMS5-14 XPMS5-14 XPMS-16 XPMS45-16 XPMS5-16 XPMS5-16 XPMS63-16 Reference number 91534AA 91536AA 91531AA 91533AA 91535AA 91537AA 91539AA Fan blade diameter (mm) 5 5 45 5 5 63 No. poles 4 4 6 6 6 6 6 Nominal fan speed (rpm) 1347 13 9 9 85 9 87 Airflow (FID, m 3 /s) Pa 2.31 3.15.91 1.31 1.55 2.28 3.4 25Pa 2.16 2.97.75 1.13 1.39 2.8 2.78 5Pa 2.5 2.77.47.89 1.11 1.85 2.53 75Pa 1.84 2.55 1. 2.19 1Pa 1.67 2.3 1.18 1.81 125Pa 1.44 2.1 15Pa 1. 1.72 Sound pressure level (db(a) @3m) 66 62 54 58 56 55 55 Max electrical power (W) 635 11 1 23 43 5 Full load current (A) 3.1 4.38.62.94 1.5 1.95 2.5 Starting current (A) 5.9 6.5.9 1.5 1.65 4.5 4.7 Motor insulation class F F F F F F F IP rating IP54 IP54 IP44 IP44 IP54 IP54 IP54 Max operating temperature (ºC) 7 Weight (kg) 13.5.4 7.1 7.9 14.3.4.5 Installation Xpelair Scimitar XPMS Plate fans can be installed at any angle. All models are supplied complete with inlet side finger guards to DIN294. Installation through a outside wall should be with a finger guard if below 2.5m, and suitable external weather protection. Use either an external louvre grille EG or a louvre shutter XLS. Xpelair Scimitar XPMS Sickle blade plate fans 15
XPMS45-16 Xpelair Scimitar XPMS Sickle blade plate fans Performance Graphs XPMS25 to 45 2 2 XPMS315-12 2 1 1 1 1 XPMS-14 XPMS45-14 1 XPMS25-12 XPMS-16 XPMS25-14 XPMS315-14 XPMS35-14.25.5.75 1. 1.25 1.5 1.75 2. Dimensions Dimensions (mm) Model A B ØC ØD ØE F G H XPMS25 37 3 7 254 265 49 73 6 XPMS315 43 3 9 345 355 62 78 11 XPMS355 485 435 9 388 68 79 16 XPMS 5 49 9 417 425 86 79 16 XPMS45 576 535 11 465 4 86 81 16 XPMS5 656 615 11 535-12 65.5 16 XPMS5 725 675 11 594-119 65.5 16 XPMS63 5 75 11 67-13 75 16
Performance Graphs XPMS5 to 63 2 2 2 1 1 1 1 XPMS5-14 1 XPMS5-16 XPMS63-16 XPMS5-16.5 1. 1.5 2. 2.5 3. 3.5 4. XPMS5-14 Xpelair Scimitar XPMS Sickle blade plate fans 17
Xpelair Scimitar XPMS Sickle blade plate fans Controllers 5 Step Transformer Starter & Thermal Electronic Speed Speed Controller Overload Protection Controller T1 STP1 XCW XPMS25-12 91367AA 8993AA XPMS25-14 91367AA 8993AA XPMS315-12 91368AA 8994AA XPMS315-14 91367AA 8993AA XPMS355-14 91367AA 8993AA XPMS-14 91367AA 8994AA XPMS-16 91367AA 8993AA XPMS45-14 91368AA 8994AA XPMS45-16 91367AA 8993AA XPMS5-14 91368AA 98AA XPMS5-16 91367AA 8994AA XPMS5-14 91369AA 98AA XPMS5-16 91368AA 8994AA XPMS63-16 91368AA 8994AA Accessories Fan Diameter Air Operated External Louvre Louvre Shutter Grille EG XLS 25mm 315mm 355mm mm 45mm 5mm 5mm 63mm 8995AA 8995AA 91144AA 8996AA 8997AA 95AA 9541AA 9541AA 89534AA 89534AA 89535AA 89535AA 89535AA 9538AA 9539AA 9539AA Air Operated Louvre Shutters XLS Hole XLS315 315x315mm Ref. 8995AA XLS35 35x35mm Ref. 91144AA XLS xmm Ref. 8996AA XLS45 45x45mm Ref. 8997AA XLS5 5x5mm Ref. 95AA XLS67 67x67mm Ref. 9541AA Aluminium construction Fixed to outside of exterior wall Air operated Use with: XPM 18
Wiring Diagrams XPMS 315/35/ with single phase starter STP1 XPMS 45 with single phase starter STP1 XPMS 5/63 with single phase starter STP1 XPMS 315/35/ with single phase starter STP1 and industrial fan controller XCW Xpelair Scimitar XPMS Sickle blade plate fans 19
Xpelair Scimitar XPMS Sickle blade plate fans Wiring diagrams XPMS 45 with single phase starter STP1 and industrial fan controller XCW XPMS 5/63 with single phase starter STP1 and industrial fan controller XCW XPMS 315/35/ with single phase starter STP1 and 5 step transformer speed controller T1 11
Wiring diagrams XPMS 45 with single phase starter STP1 and 5 step transformer speed controller T1 XPMS 5/63 with single phase starter STP1 and 5 step transformer speed controller T1 Xpelair Scimitar XPMS Sickle blade plate fans 111
Xpelair Rapier XPMA Plate mounted axial fans NEW Key features The Range Application: Type: Control options: Plate mounted axial Axial blade Electronic / 5 step transformer speed controller Xpelair Rapier is a new range of cast aluminium aerofoil blade section plate fans which now extends from 315mm to 71mm. The range has also been extended to include 4, 6 and 8 pole versions. Rapier plate fans are suitable for wall mounting and short duct in larger areas in commercial, agricultural and high performance industrial installations including kitchens, factories, garages and warehouses. The wall plate with bellmouth entry is manufactured in pressed steel with a corrosion resistant powder coated finish. For safety the front is protected by a robust finger guard. All Xpelair Rapier fans are fully speed controllable. They are suitable for installation in reverse operation with a reduction in performance. At the heart of the unit is a proven capacitor start and run Class F external rotor motor cast aluminium blade assembly. Specification Fan Plate Pressed galvanised steel wall plate incorporating a full bellmouth and four fixing points. An inlet protection finger guard is a welded wire framework to DIN EN294. The assembly is treated with two coat plastic corrosion resistant paint to RAL 95 Black. Motor/ impeller Designed to form a compact aerodynamically efficient unit. The die cast aluminium alloy drive motor is a 1% variable-speed controllable external rotor motor which simultaneously constitutes the fan's hub ensuring the motor is effectively cooled by the passing airflow. Motors are class F with protection to IP54. The motors feature maintenance free deep-groove ball bearings with high temperature grease for temperatures from -ºC to +ºC or +7ºC dependant on model. Impellers are profiled die cast aluminium consisting of seven aerofoil blades. The motor / impellers are balanced in two planes to DIN ISO 19 part1: 1986 grade G 6.3. TK thermal protection is provided. Electrical supply 2-2V single phase 5Hz or -415V three phase 5Hz Terminal Boxes and control Terminal box is to IP54. A range of 5 step transformer speed controllers are available A starter with overload protection may also be used. 112
Performance Data Single Phase MODEL XPMA315-12 XPMA315-14 XPMA355-14 XPMA-14 XPMA45-14 XPMA5-14 Reference number 915AA 91541AA 91543AA 91545AA 91547AA 9149AA Fan blade diameter (mm) 315 315 355 45 5 No. poles 2 4 4 4 4 4 Nominal fan speed (rpm) 265 1 133 135 137 129 Airflow (m 3 /s) Pa 1.6.55.96 1.44 1.75 2.24 25Pa 1.2.48.87 1.33 1.64 2.12 5Pa.99.42.76 1.19 1.53 1.97 75Pa.95 1. 1.39 1.81 1Pa.92 1.18 1. 125Pa.88 1.26 15Pa.84 175Pa.79 Pa.69 Sound pressure level (db(a)@3m) 61 48 53 58 58 Max electrical power rating (W) 47 13 19 29 3 51 Full load current (A) 2.1.59.84 1.45 1. 2.3 Starting current (A) 6. 1.5 1.5 2.4 3.6 4.3 Motor insulation class F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 7 7 7 Weight (kg) 9.8 6.1 7.1 9.4 11.3 16.6 Single Phase MODEL XPMA-16 XPMA45-16 XPMA5-16 XPMA5-16 XPMA63-16 XPMA71-16 Reference number 91546AA 91548AA 91549AA 91551AA 915AA 91553AA Fan blade diameter (mm) 45 5 5 63 71 No. poles 4 6 6 6 6 6 Nominal fan speed (rpm) 9 93 9 8 8 85 Airflow (m 3 /s) Pa 1.39 1.18 1.54 2.47 3.35 4.56 25Pa.81 1.4 1.35 2.22 3.8 4.21 5Pa.79 1.3 1.93 2.77 3.91 75Pa 1.5 2.34 3.48 1Pa 125Pa 15Pa 175Pa Sound pressure level (db(a)@3m) 48 49 54 55 59 61 Max electrical power rating (W) 13 17 43 89 Full load current (A)..75.96 1.95 2.7 4.1 Starting current (A) 1.4 1.5 2.7 4.6 5.3 8. Motor insulation class F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 7 7 7 65 Weight (kg) 9.4 11.3 16.6 18.6 24.5 32. Three phase MODEL XPMA45-34 XPMA5-34 XPMA5-34 XPMA63-34 XPMA71-34 XPMA45-36 XPMA5-36 Reference number 91554AA 91556AA 91558AA 915AA 91562AA 91555AA 91557AA Fan blade diameter (mm) 45 5 5 63 71 45 5 No. poles 4 4 4 4 4 6 6 Nominal fan speed (rpm) 139 13 13 13 135 9 9 Airflow (m 3 /s) Pa 1.76 2.31 3.43 5.22 6.81 1.18 1.53 25Pa 1.66 2. 3.27 5.3 6.69.97 1.37 5Pa 1.58 2.1 3.1 4.85 6.53.77 1.14 75Pa 1.23 1.98 2.89 4.66 6.36 1Pa 1.23 1.84 2.66 4.49 6.18 125Pa 1.64 2.41 4.27 5.99 15Pa 2.37 4.3 5.77 175Pa 3.73 5.51 Pa 3.42 5.23 25Pa 4.49 Sound pressure level (db(a)@3m) 58 61 63 7 7 49 52 Max electrical power rating (W) 3 55 125 19 29 125 Full load current (A).75 1.5 2. 3. 4.9.35.56 Starting current (A) 2.6 3.7 11. 14. 23. 1. 1.5 Motor insulation class F F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 7 7 65 7 7 Weight (kg) 11.3 16.6 22.5 32.5 43. 11.3 15.1 Xpelair Rapier XPMA Plate mounted axial fans 113
Xpelair Rapier XPMA Plate mounted axial fans Performance Data Three phase MODEL XPMA5-36 XPMA63-36 XPMA71-36 XPMA-36 XPMA1-36 XPMA-38 XPMA1-38 Reference number 91559AA 91561AA 91563AA 91564AA 91566AA 91565AA 91567AA Fan blade diameter (mm) 5 63 71 1 1 No. poles 6 6 6 6 6 8 8 Nominal fan speed (rpm) 8 8 89 9 935 6 67 Airflow (m 3 /s) Pa 2. 3.39 4.71 6. 13.89 4.87 9. 25Pa 2.15 3.12 4.44 6.1 13.61 4. 9. 5Pa 1.84 2.83 4.11 5.75 13.33 3.82 8.72 75Pa 2.38 3.73 5.34 13.3 2.86 8.23 1Pa 3.29 4.85 12.71 7.26 125Pa 4.1 12.35 6.72 15Pa 11.94 175Pa 11.42 Pa 1.9 Sound pressure level (db(a) @3m) 55 62 62 78 55 66 Max electrical power rating (W) 39 7 89 1 55 7 2 Full load current (A).81 1.5 1. 2.7 1.5 1. 4. Starting current (A) 1.75 3.6 6.4 9.8 67. 5.5 13. Motor insulation class F F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 65 7 65 7 Weight (kg).5 24.5 32. 38. 85. 38. 64. Installation Xpelair Rapier XPMA Plate fans can be installed at any angle. All models are supplied complete with inlet side finger guards to DIN294. Installation through a outside wall should be with a finger guard if below 2.5m, and suitable external weather protection. Use either an external louvre grille EG or a louvre shutter XLS. 114
Quick Selector 315 2 pole 225 Max static pressure [Pa] 315 4 pole 75 355 4 pole 4 pole 85 6 pole 37 45 4 pole 115 45 6 pole 55 5 4 pole 145 5 6 pole 65 5 4 pole 185 5 6 pole 78 63 4 pole 21 63 6 pole 71 4 pole 71 6 pole 6 pole 8 pole 1 6 pole 1 8 pole 9 75 11 138 2 1 1 3 5 2 4 6 8 1 12 14 245 Airflow [m 3 /h] [m 3 /s] Xpelair Rapier XPMA Plate mounted axial fans 115
Xpelair Rapier XPMA Plate mounted axial fans Performance Graphs XPMA315-12 2 23V 1 1 1V 13V 15V.2.4.6.8 1. 1.2 XPMA315-14 9 7 23V 5 3 1.1.2.3.4.5.6 XPMA355-14 23V 1V 13V 15V.2.4.6.8 1. 116
Performance Graphs XPMA-14 23V 1V 13V 15V.2.4.6.8 1. 1.2 1.4 1.6 XPMA-16 23V 3 1 XPMA45-14 1 1.2.4.6.8 1. 15V 13V 15V 1V.2.4.6.8 1. 1.2 1.4 1.6 1.8 13V 23V 1V Xpelair Rapier XPMA Plate mounted axial fans 117
Xpelair Rapier XPMA Plate mounted axial fans Performance Graphs XPMA45-16 5 XPMA 3 XPMA 1 XPMA XPMA XPMA5-14 1.2.4.6.8 1. 1.2 1 XPMA 1 XPMA XPMA XPMA XPMA5-16.2.4.6.8 1. 1.2 1.4 1.6 1.8 2. 2.2 2.4 XPMA 5 3 XPMA XPMA 1 XPMA.2.4.6.8 1. 1.2 1.4 1.6 118
Performance Graphs XPMA5-16 7 23V 5 3 1V 13V 1 15V XPMA63-16 1.5 1. 1.5 2. 2.5 23V XPMA71-16 1 1 15V 1V.5 1. 1.5 2. 2.5 3. 3.5 15V 13V 13V 1V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 23V Xpelair Rapier XPMA Plate mounted axial fans 119
Xpelair Rapier XPMA Plate mounted axial fans Performance Graphs XPMA45-34 1 1 V 1V 23V 1V XPMA45-36.2.4.6.8 1. 1.2 1.4 1.6 1.8 5 V 3 1V 23V 1 1V.2.4.6.8 1. 1.2 XPMA5-34 1 1 V 1 1 1V 23V 1V.5 1. 1.2 2. 2.5 1
Performance Graphs XPMA5-36 V 1V 23V 1V XPMA5-34 1.2.4.6.8 1. 1.2 1.4 1.6 1 V 1 1 XPMA5-36.5 1. 1.5 2. 2.5 3. 3.5 1V 1V 1V 1V 23V 23V.5 1. 1.5 2. 2.5 V Xpelair Rapier XPMA Plate mounted axial fans 121
Xpelair Rapier XPMA Plate mounted axial fans Performance Graphs XPMA63-34 2 V 1 1 1V 23V 1V XPMA63-36 1.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 V 23V 1V 1V.5 1. 1.5 2. 2.5 3. 3.5 XPMA71-34 2 2 V 1 1 1V 23V 1V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 6. 6.5 7. 7.5 122
Performance Graphs XPMA71-36 1 1 V 1V 23V 1V XPMA-36 1.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 1 V 1 XPMA-38 1V 23V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 6. 6.5 1V 1V 1V 23V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. V Xpelair Rapier XPMA Plate mounted axial fans 123
Xpelair Rapier XPMA Plate mounted axial fans Performance Graphs XPMA1-36 25 V 15 1 5 XPMA1-38 1 1 2 3 4 5 6 7 8 9 1 11 12 13 14 1 V 23V 1V 1V 1 2 3 4 5 6 7 8 9 1 124
Controllers and Accessories XPMA315-12 5 Step Transformer Starter & Thermal Speed Controller Overload Protection T1/T3 STP1/STP3 91368AA XPMA315-14 91367AA XPMA355-14 91367AA XPMA-14 91367AA XPMA-16 91367AA Three Phase Single Phase XPMA45-14 XPMA45-16 XPMA5-14 XPMA5-16 XPMA5-16 XPMA63-16 XPMA71-16 XPMA45-34 XPMA45-36 XPMA5-34 XPMA5-36 XPMA5-34 XPMA5-36 XPMA63-34 XPMA63-36 XPMA71-34 XPMA71-36 XPMA-36 XPMA-38 XPMA1-36 XPMA1-38 91368AA 91367AA 91367AA 91367AA 91368AA 91368AA 91369AA 91361AA 91361AA 91362AA 91361AA 91363AA 91361AA 91364AA 91362AA 91364AA 91362AA 91363AA 91362AA N/A 91364AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA 91373AA Xpelair Rapier XPMA Plate mounted axial fans 125
Xpelair Rapier XPMA Plate mounted axial fans Controllers and Accessories Fan Diameter Air Operated External Louvre Louvre Shutter Grille EG XLS 315mm 355mm mm 8995AA 91144AA 8996AA 89534AA 89535AA 89535AA External Louvre Grilles EG Hole diameter EG3 3x3mm Ref. 89534AA EG45 45x45mm Ref. 89535AA EG5 5x5mm Ref. 9538AA EG67 67x67mm Ref. 9539AA Weather resistant recess mounting fixed louvre grille for exterior walls Aluminium construction Fitted birdguard A C 45mm 8997AA 89535AA 5mm 95AA 9538AA 5mm 9541AA 9539AA D 63mm 9541AA 9539AA 71mm mm 1mm B Dimensions (mm) Model A B C D EG3 345 285 55 292 EG45 495 435 55 442 Dimensions Dimensions (mm) Model A B ØC ØD ØE F G H XPMA315-12 43 3 9 3 328 18 86 11 XPMA315-14 43 3 9 3 328 79 84 11 XPMA355-14 485 435 9 367 372 9 86 12 XPMA-14 5 49 9 412 4 16 87 12 XPMA-16 5 49 9 412 4 16 87 12 XPMA45-14 575 535 11 463 4 98 9 14 XPMA45-16 575 535 11 463 4 98 9 14 XPMA5-14 655 615 11 517 528 121 77 16 XPMA5-16 655 615 11 517 528 121 77 16 XPMA5-16 725 675 11 568 589 1 62 16 XPMA63-16 5 75 11 643 67 154 66 XPMA71-16 85 81 14.5 71 763 2 66 XPMA45-34 575 535 11 463 4 123 28 14 XPMA45-36 575 535 11 463 4 123 28 14 XPMA5-34 655 615 11 517 528 141 82 16 XPMA5-36 655 615 11 517 528 141 82 16 XPMA5-34 725 675 11 568 589 143 62 16 XPMA5-36 725 675 11 568 589 138 62 16 XPMA63-34 5 75 11 643 67 175 66 XPMA63-36 5 75 11 643 67 141 66 XPMA71-34 85 81 14.5 7 763 242 51 XPMA71-36 85 81 14.5 7 763 242 51 XPMA-36 97 91 14.5 7 87 2 51 XPMA-38 97 91 14.5 7 87 2 51 XPMA1-36 117 1135 14.5 19 167 286 XPMA1-38 117 1135 14.5 19 167 286 38 126
Wiring Diagrams XPMA with single phase starter STP1 XPMA with single phase starter STP1 and 5 step transformer speed controller T1 XPMA with three phase starter STP3 XPMA with three phase starter STP3 and 5 step transformer speed controller T3 Xpelair Rapier XPMA Plate mounted axial fans 127
Xpelair Scimitar XSCS Sickle blade short case axial fans NEW Key features The Range Application: Type: Control options: Short case axial Sickle blade Electronic / 5 step transformer speed controller Xpelair introduces a new generation of sickle blade fans designed for a wide range of commercial and industrial ducted ventilation applications. The blade design optimises airflow performance whilst minimising sound levels. The blades are directly mounted to capacitor start and run external rotor motors and then dynamically balanced. The robust short case is rolled and electro welded with rolled flanges. Cased units are supplied in form B running with motor downstream. The Scimitar range can be installed at any angle and is fully speed controllable. Specification Casings Manufactured in galvanised sheet metal incorporating flanges at each end drilled for connection to ductwork. The casing is further protected by a corrosion resistant two coat paint process. Motors/impellers Motor mounting is via a rigid welded steel rod construction and supports the motor at four points. Designed to form a compact aerodynamically efficient unit. The die cast aluminium alloy drive motor is a 1% variable-speed controllable external rotor motor which simultaneously constitutes the fan's hub ensuring the motor is effectively cooled by the passing airflow. Motors are Class B or F with protection to IP44 or IP54. The motors feature maintenance free ball bearings with high temperature grease for temperatures from -ºC to a maximum of +65ºC (dependant on model). Impellers are pressed steel. The motor / impellers are balanced in two planes to DIN ISO 19 part1: 1986 grade G 6.3. TK thermal protection is provided. Electrical supply 2-2V single phase 5Hz. Terminal Boxes and control Terminal box is to IP54. A range of 5 step transformer speed controllers are available A starter with overload protection may also be used. 128
Performance Data MODEL XSCS315-12 XSCS315-14 XSCS355-14 XSCS-14 XSCS45-14 Reference number 91526AA 91527AA 91529AA 9153AA 91532AA Fan blade diameter (mm) 315 315 355 45 No. poles 2 4 4 4 4 Nominal fan speed (rpm) 141 1365 143 143 Airflow (FID, m 3 /s) Pa 1.6.68.9 1.39 1.87 25Pa 1.3.62.78 1.26 1.76 5Pa.99.49.69 1.15 1.63 75Pa.94.3.56 1.3 1.52 1Pa.9.83 1.39 125Pa.87.47 1.21 15Pa.82.9 175Pa.78 Pa.73 225Pa.55 25Pa.35 275Pa.25 Sound pressure level (db(a) @3m) 68 54 59 64 67 Max electrical power (W) 3 12 132 1 4 Full load current (A) 1.58.52.58.73 2. Starting current (A) 3.7 1. 1. 2. 4.5 Motor insulation class B B F B F IP rating IP44 IP44 IP44 IP44 IP54 Max operating temperature (ºC) 55 Weight (kg) 6.1 5.5 7. 8.3 14.5 MODEL XSCS5-14 XSCS5-14 XSCS-16 XSCS45-16 XSCS5-16 XSCS5-16 XSCS63-16 Reference number 91534AA 91536AA 91531AA 91533AA 91535AA 91537AA 91539AA Fan blade diameter (mm) 5 5 45 5 5 63 No. poles 4 4 6 6 6 6 6 Nominal fan speed (rpm) 127 13 9 9 885 9 89 Airflow (FID, m 3 /s) Pa 2.31 3.15.91 1.31 1.55 2.28 3.4 25Pa 2.16 2.97.75 1.13 1.39 2.8 2.78 5Pa 2.5 2.77.47.89 1.11 1.85 2.53 75Pa 1.84 2.55 1. 2.19 1Pa 1.67 2.3 1.18 1.81 125Pa 1.44 2.1 15Pa 1. 1.72 Sound pressure level (db(a) @3m) 66 62 54 58 56 55 Max electrical power (W) 7 11 1 3 43 77 Full load current (A) 3.3 4.38.62.92 1.65 1.95 3.5 Starting current (A) 6. 7.3.9 1.5 2.9 4.5 5. Motor insulation class F F F F F F F IP rating IP54 IP54 IP44 IP44 IP54 IP54 IP54 Max operating temperature (ºC) 65 Weight (kg) 16.8.9 8.1 1. 14.3.4 21.4 Installation Illustration shows a suspended system. Where a unit is installed with support from below coupling flanges, mounting feet and antivibration mounts are recommended. These are available in the Short Case Axial Fan Xtras SCX which comprise of: 2 matching coupling flanges, 2 flexible connection sleeves, 4 worm drive clips, 2 mounting feet and 4 anti-vibration mounts Fan size: 315mm 35mm mm 45mm 5mm 5mm Ref. 91317AA Ref. 91318AA Ref. 91319AA Ref. 913AA Ref. 91321AA Ref. 91322AA A F C D XSCS SHORT CASE AXIAL A B C B Coupling flange Silencer Suspension rods E D E F Airflow Mounting feet Flexible connection Worm drive clip Xpelair Scimitar XSCS Sickle blade short case axial fans 129
Xpelair Scimitar XSCS Sickle blade short case axial fans Performance Graphs XSCS25 to 45 2 2 XSCS315-12 2 1 1 1 1 XSCS-14 XSCS45-14 1 XSCS45-16 XSCS-16 XSCS35-14 XSCS315-14.25.5.75 1. 1.25 1.5 1.75 2. Dimensions Dimensions (mm) Model ØA B ØC ØD ØE F G H XSCS315 356 8x45º 9.5 317 382 135 72 6 XSCS355 395 8x45º 9.5 356 421 135 72 6 XSCS 438 12x3º 9.5 466 155 72 6 XSCS45 487 12x3º 9.5 451 515 1 72 6 XSCS5 541 12x3º 9.5 53 567 165 72 6 XSCS5 5 16x22.5º 11.5 559 635 21 72 8 XSCS63 674 16x22.5º 11.5 634 77 2 72 8 13
Performance Graphs XSCS5 to 63 2 2 2 1 1 1 1 XSCS5-14 1 XSCS5-16 XSCS5-16 XSCS63-16.5 1. 1.5 2. 2.5 3. 3.5 4. XSCS5-14 Xpelair Scimitar XSCS Sickle blade short case axial fans 131
Xpelair Scimitar XSCS Sickle blade short case axial fans Controllers 5 Step Transformer Starter & Thermal Electronic Speed Speed Controller Overload Protection Controller T1 STP1 XCW XSCS315-12 91368AA 8994AA XSCS315-14 91367AA 8993AA XSCS355-14 91367AA 8993AA XSCS-14 91367AA 8994AA XSCS-16 91367AA 8993AA XSCS45-14 91368AA 8994AA XSCS45-16 91367AA 8993AA XSCS5-14 91368AA 98AA XSCS5-16 91367AA 8994AA XSCS5-14 91369AA 98AA XSCS5-16 91368AA 8994AA XSCS63-16 91368AA 98AA Accessories Fan Diameter Short Case Axial Axial Silencer Axial Fan Silencer with Pod Xtras XCA XCP 315mm 91317AA 91944AA 91956AA 355mm 91318AA 91945AA 91957AA mm 91319AA 91946AA 91958AA 45mm 913AA 91947AA 91959AA 5mm 91321AA 91948AA 919AA 5mm 91322AA 91949AA 91961AA 63mm 92267AA 9195AA 91962AA 132
Wiring Diagrams XSCS 315/35/ with single phase starter STP1 XSCS 45 with single phase starter STP1 XSCS 5/63 with single phase starter STP1 XSCS 315/35/ with single phase starter STP1 and industrial fan controller XCW Xpelair Scimitar XSCS Sickle blade short case axial fans 133
Xpelair Scimitar XSCS Sickle blade short case axial fans Wiring Diagrams XSCS 45 with single phase starter STP1 and industrial fan controller XCW XSCS 5/63 with single phase starter STP1 and industrial fan controller XCW XSCS 315/35/ with single phase starter STP1 and 5 step transformer speed controller T1 134
Wiring Diagrams XSCS 45 with single phase starter STP1 and 5 step transformer speed controller T1 XSCS 5/63 with single phase starter STP1 and 5 step transformer speed controller T1 Xpelair Scimitar XSCS Sickle blade short case axial fans 135
Xpelair Rapier XSCA Short case axial fans NEW Key features The Range Type: Application: Control options: Ducted axial ventilation Commercial / Industrial Electronic / 5 step transformer speed controller Xpelair XSCA is a high performance range of twenty three compact and efficient industrial axial cased fans featuring external rotor motors and high pressure axial blade impellers. Available from 315 to 1mm in single and three phase versions. Suitable for medium pressure, low noise ducted applications in commercial, agricultural and high performance industrial installations including kitchens, factories, garages and warehouses. At the heart of the XSCA range is a proven capacitor start and run Class F external rotor motor and axial blade impeller assembly designed for high output performance with low noise. All the impellers are die cast aerofoil section. Form B running. The casing is manufactured in galvanised steel with a corrosion resistant powder coated finish and the terminal box IP54 making it suitable for external applications. The units are fully speed controllable and can be wired for reverse operation. Specification Casings Manufactured in galvanised sheet metal incorporating flanges at each end drilled for connection to ductwork. The casing is further protected by a corrosion resistant two coat paint process. Motors Designed to form a compact aerodynamically efficient unit. The die cast aluminium alloy drive motor is a 1% variable-speed controllable external rotor motor which simultaneously constitutes the fan's hub ensuring the motor is effectively cooled by the passing airflow. Motors are class F with protection to IP54. The motors feature maintenance free deep-groove ball bearings with high temperature grease for temperatures from -ºC to +ºC or +7ºC dependant on model. Impellers are profiled die cast aluminium consisting of seven aerofoil blades. The motor / impellers are balanced in two planes to DIN ISO 19 part1: 1986 grade G 6.3. TK thermal protection is provided. Electrical supply 2-2V single phase 5Hz or - 415V three phase 5Hz. Terminal Box and control Terminal box is to IP54. A range of 5 step transformer speed controllers are available A starter with overload protection may also be used. 136
Performance Data Single Phase MODEL XSCA315-12 XSCA315-14 XSCA355-14 XSCA-14 XSCA45-14 XSCA5-14 Reference number 91584AA 91585AA 91587AA 91589AA 91591AA 9178AA Fan blade diameter (mm) 315 315 355 45 5 No. poles 2 4 4 4 4 4 Nominal fan speed (rpm) 265 1 133 135 137 129 Airflow (m 3 /s) Pa 1.6.61.96 1.44 1.75 2.24 25Pa 1.2.57.87 1.33 1.64 2.12 5Pa.99.5.76 1.19 1.53 1.97 75Pa.95. 1. 1.39 1.81 1Pa.92 1.18 1. 125Pa.88 1.26 15Pa.84 175Pa.79 Pa.69 Sound pressure level (db(a) @3m) 61 48 53 58 58 Max electrical power rating (W) 47 13 19 29 3 51 Full load current (A) 2.1.59.84 1.45 1. 2.3 Starting current (A) 6. 1.5 1.5 2.4 3.6 4.3 Motor insulation class F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 7 7 7 Weight (kg) 11 7 8 1 12 1 Single Phase MODEL XSCA-16 XSCA45-16 XSCA5-16 XSCA5-16 XSCA63-16 XSCA71-16 Reference number 9159AA 91592AA 91593AA 91594AA 91595AA 91597AA Fan blade diameter (mm) 45 5 5 63 71 No. poles 4 6 6 6 6 6 Nominal fan speed (rpm) 9 93 9 8 8 85 Airflow (m 3 /s) Pa 1.39 1.18 1.54 2.47 3.35 4.56 25Pa.81 1.4 1.35 2.22 3.8 4.31 5Pa.79 1.3 1.93 2.77 3.89 75Pa 1.5 2.34 3.47 1Pa 125Pa 15Pa 175Pa Sound pressure level (db(a) @3m) 48 49 54 55 59 61 Max electrical power rating (W) 13 17 43 89 Full load current (A)..75.96 1.95 2.7 4.1 Starting current (A) 1.4 1.5 2.7 4.6 5.3 8. Motor insulation class F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 7 7 7 65 Weight (kg) 1 12 14 17 35 Three phase MODEL XSCA45-34 XSCA5-34 XSCA5-34 XSCA63-34 XSCA71-34 XSCA45-36 XSCA5-36 Reference number 91598AA 91AA 912AA 914AA 916AA 91599AA 911AA Fan blade diameter (mm) 45 5 5 63 71 45 5 No. poles 4 4 4 4 4 6 6 Nominal fan speed (rpm) 139 13 13 13 135 9 9 Airflow (m 3 /s) Pa 1.76 2.31 3.43 5.22 6.81 1.18 1.53 25Pa 1.66 2. 3.27 5.3 6.69.97 1.37 5Pa 1.68 2.1 3.1 4.85 6.53.77 1.14 75Pa 1.23 1.98 2.89 4.66 6.36 1Pa 1.23 1.84 2.66 4.49 6.18 125Pa 1.64 2.41 4.27 5.99 15Pa 2.37 4.3 5.77 175Pa 3.73 5.51 Pa 3.42 5.23 25PA 4.49 Sound pressure level (db(a) @3m) 58 61 63 7 7 49 52 Max electrical power rating (W) 3 55 125 19 29 125 Full load current (A).75 1.5 2. 3. 4.9.35.56 Starting current (A) 2.6 3.7 11. 14. 23. 1. 1.5 Motor insulation class F F F F F F F IP rating IP54 IP54 IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 7 7 65 7 7 Weight (kg) 8 1 19 3 46 8 8 Xpelair Rapier XSCA Short case axial fans 137
Xpelair Rapier XSCA Short case axial fans Performance Data Three phase MODEL XSCA5-36 XSCA63-36 XSCA71-36 XSCA-36 XSCA1-36 Reference number 913AA 915AA 917AA 918AA 919AA Fan blade diameter (mm) 5 63 71 1 No. poles 6 6 6 6 6 Nominal fan speed (rpm) 8 8 89 9 935 Airflow (m 3 /s) Pa 2. 3.39 4.71 6. 13.89 25Pa 2.15 3.12 4.44 6.1 13.61 5Pa 1.84 2.83 4.11 5.75 13.33 75Pa 2.38 3.73 5.34 13.3 1Pa 3.29 4.85 12.71 125Pa 4.1 12.35 15Pa 11.94 175Pa 11.42 Pa 1.9 Sound pressure level (db(a) @3m) 55 62 62 78 Max electrical power rating (W) 39 7 89 1 55 Full load current (A).81 1.5 1. 2.7 1.5 Starting current (A) 1.75 3.6 6.4 9.8 67. Motor insulation class F F F F F IP rating IP54 IP54 IP54 IP54 IP54 Max operating temperature (ºC) 65 7 Weight (kg) 12 13 35 74 Sound Power Data Dimensions (mm) Model ØA ØB ØC ØD E F G XSCA315-12 382 317 9.5 356 135 8x45º 6 XSCA315-14 382 317 9.5 356 135 8x45º 6 XSCA355-14 421 356 9.5 395 135 8x45º 6 XSCA-14 466 9.5 438 155 12x3º 6 XSCA-16 466 9.5 438 155 12x3º 6 XSCA45-14 515 451 9.5 487 1 12x3º 6 XSCA45-16 515 451 9.5 487 1 12x3º 6 XSCA5-14 567 53 9.5 541 165 12x3º 6 XSCA5-16 567 53 9.5 541 165 12x3º 6 XSCA5-16 635 559 11.5 5 21 16x22.5º 8 XSCA63-16 77 634 11.5 674 2 16x22.5º 8 XSCA71-16 785 711 11.5 751 2 16x22.5º 1 XSCA45-34 515 451 9.5 487 1 12x3º 6 XSCA45-36 515 451 9.5 487 1 12x3º 6 XSCA5-34 567 53 9.5 541 165 12x3º 6 XSCA5-36 567 53 9.5 541 165 12x3º 6 XSCA5-34 635 559 11.5 5 21 16x22.5º 8 XSCA5-36 635 559 11.5 5 21 16x22.5º 8 XSCA63-34 77 634 11.5 674 2 16x22.5º 8 XSCA63-36 77 634 11.5 674 2 16x22.5º 8 XSCA71-34 785 711 11.5 751 2 16x22.5º 1 XSCA71-36 785 711 11.5 751 2 16x22.5º 1 XSCA-36 875 797 11.5 837 2 24x15º 1 XSCA1-36 1 11 11.5 143 33 24x15º 5 Installation Illustration shows a suspended system. Where a unit is installed with support from below coupling flanges, mounting feet and antivibration mounts are recommended. C D B Airflow These are available in the Short Case Axial Fan Xtras SCX which comprise of: 2 matching coupling flanges, 2 flexible connection sleeves, 4 worm drive clips, 2 mounting feet and 4 anti-vibration mounts A F Fan size: 315mm 355mm mm 45mm 5mm 5mm Ref. 91317AA Ref. 91318AA Ref. 91319AA Ref. 913AA Ref. 91321AA Ref. 91322AA XSCA SHORT CASE AXIAL A Coupling flange B Silencer C Suspension rods E D E F Mounting feet Flexible connection Worm drive clip 138
Quick Selector 315 2 pole 225 Max static pressure [Pa] 315 4 pole 75 355 4 pole 4 pole 85 6 pole 37 45 4 pole 115 45 6 pole 55 5 4 pole 145 5 6 pole 65 5 4 pole 185 5 6 pole 78 63 4 pole 21 63 6 pole 9 71 4 pole 71 6 pole 6 pole 1 6 pole 11 138 2 1 3 5 2 4 6 8 1 12 14 245 Airflow [m 3 /h] [m 3 /s] Xpelair Rapier XSCA Short case axial fans 139
Xpelair Rapier XSCA Short case axial fans Performance Graphs XSCA315-12 2 23V 1 1 1V 13V 15V.2.4.6.8 1. 1.2 XSCA315-14 9 7 23V 5 3 1.1.2.3.4.5.6 XSCA355-14 23V 1V 13V 15V.2.4.6.8 1. 1
Performance Graphs XSCA-14 23V 1V 13V 15V.2.4.6.8 1. 1.2 1.4 1.6 XSCA-16 23V 3 1 XSCA45-14 1 1.2.4.6.8 1. 15V 13V 15V 1V.2.4.6.8 1. 1.2 1.4 1.6 1.8 13V 23V 1V Xpelair Rapier XSCA Short case axial fans 141
Xpelair Rapier XSCA Short case axial fans Performance Graphs XSCA45-16 5 XPMA 3 XPMA 1 XPMA XPMA XSCA5-14 1.2.4.6.8 1. 1.2 1 XPMA 1 XPMA XPMA XPMA XSCA5-16.2.4.6.8 1. 1.2 1.4 1.6 1.8 2. 2.2 2.4 XPMA 5 3 XPMA XPMA 1 XPMA.2.4.6.8 1. 1.2 1.4 1.6 142
Performance Graphs XSCA5-16 7 23V 5 3 1V 13V 1 15V XSCA63-16 1.5 1. 1.5 2. 2.5 23V XSCA71-16 1 1 15V 1V.5 1. 1.5 2. 2.5 3. 3.5 15V 13V 13V 1V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 23V Xpelair Rapier XSCA Short case axial fans 143
V Xpelair Rapier XSCA Short case axial fans Performance Graphs XSCA45-34 1 1 1V 23V 1V XSCA45-36.2.4.6.8 1. 1.2 1.4 1.6 1.8 5 V 3 1V 23V 1 1V.2.4.6.8 1. 1.2 XSCA5-34 1 1 V 1 1 1V 23V 1V.5 1. 1.2 2. 2.5 144
Performance Graphs XSCA5-36 V 1V 23V 1V XSCA5-34 1.2.4.6.8 1. 1.2 1.4 1.6 1 V 1 1 XSCA5-36.5 1. 1.5 2. 2.5 3. 3.5 1V 1V 1V 1V 23V 23V.5 1. 1.5 2. 2.5 V Xpelair Rapier XSCA Short case axial fans 145
Xpelair Rapier XSCA Short case axial fans Performance Graphs XSCA63-34 2 V 1 1 1V 23V 1V XSCA63-36 1.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 V 23V 1V 1V.5 1. 1.5 2. 2.5 3. 3.5 XSCA71-34 2 2 V 1 1 1V 23V 1V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 6. 6.5 7. 7.5 146
Performance Graphs XSCA71-36 1 1 V 1V 23V 1V XSCA-36 1.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 1 V 1 XSCA1-36 25 15 1 5 1V 1V 23V.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 6. 6.5 1 2 3 4 5 6 7 8 9 1 11 12 13 14 V Xpelair Rapier XSCA Short case axial fans 147
Xpelair Rapier XSCA Short case axial fans Controllers 5 Step Transformer Starter & Thermal Speed Controller Overload Protection T1/T3 STP1/STP3 5 Step Transformer Starter & Thermal Speed Controller Overload Protection T1/T3 STP1/STP3 XSCA315-12 91368AA XSCA45-34 91361AA 91373AA XSCA315-14 91367AA XSCA45-36 91361AA 91373AA XSCA355-14 91367AA XSCA5-34 91362AA 91373AA XSCA-14 91367AA XSCA5-36 91361AA 91373AA XSCA-16 91367AA XSCA5-34 91363AA 91373AA Single Phase XSCA45-14 XSCA45-16 91368AA 91367AA Three Phase XSCA5-36 XSCA63-34 91361AA 91364AA 91373AA 91373AA XSCA5-14 91367AA XSCA63-36 91362AA 91373AA XSCA5-16 91367AA XSCA71-34 91364AA 91373AA XSCA5-16 91368AA XSCA71-36 91362AA 91373AA XSCA63-16 91368AA XSCA-36 91363AA 91373AA XSCA71-16 91369AA XSCA1-36 N/A 91373AA Accessories Fan Diameter Short Case Axial Axial Silencer External Louvre Louvre Shutter Axial Fan Silencer with Pod Grille EG XLS Xtras XCA XCP 315mm 91317AA 91944AA 91956AA 89535AA 8995AA 355mm 91318AA 91945AA 91957AA 89535AA 91144AA mm 91319AA 91946AA 91958AA 89535AA 8996AA 45mm 913AA 91947AA 91959AA 89535AA 8997AA 5mm 91321AA 91948AA 919AA 9538AA 95AA 5mm 91322AA 91949AA 91961AA 9539AA 9541AA 63mm 92267AA 9195AA 91962AA 9539AA 9541AA 71mm 92268AA 91951AA 91963AA mm 92269AA 91952AA 91964AA 1mm 92271AA 91954AA 91966AA 148
Wiring Diagrams XSCA with single phase starter STP1 XSCA with single phase starter STP1 and 5 step transformer speed controller T1 XSCA with three phase starter STP3 XSCA with three phase starter STP3 and 5 step transformer speed controller T3 Xpelair Rapier XSCA Short case axial fans 149
Xpelair Aerofoil XLCA Long case axial fans NEW Key features Type: Application: Control options: Legislation: Machinery Directive Long Case Ducted Electronic / 5 step transformer speed controller (most models) CIBSE guide HSE The Range Engineering Excellence. Long case axial units are used in a wide range of applications ranging from industrial processes to kitchen ventilation in retail food outlets. Sizes 315mm to 125mm with performance from 1 up to 15,m 3 /h at static pressure up to 15 Pa. Higher pressures are possible on multistage versions, contra rotating. The New Aero Long Case range has all the quality features you would expect from Xpelair: A case with rolled flange which is then hot dipped galvanised. Heavy duty high performance blades which are x-ray quality tested at manufacture. Precision balancing for optimum performance. Foot mounted motors selected for speed controllability wherever possible. Check out the Aero performance graphs to discover the huge range of performance options; the range outperforms many comparable long case fans often allowing a smaller ducting system components to be chosen where others have to move on to a larger frame size. Popular models are ex stock. Made to order units are normally available ex-factory within 14 days of order confirmation. Specification Explanation and key Casings Casing and heavy duty motor support pad are manufactured in mild steel with all steel parts hot dip galvanised after manufacture. Flanges are roll formed and drilled to DIN 24154. To observe direction of rotation, a sight port is provided closed by a rubber grommet. Impellers Hubs and aerodynamically profiled blades are manufactured in cast aluminium alloy. The components are X ray examined to ensure quality and reliability. The blades are adjustable pitch to optimise duty angle The pitch angle is factory set before despatch. The solidity varies for a wider range of performance. The assembly is attached positively to the shaft using a conical inner hub locked by way of a keywayed mild steel cotter. Motors Standard close squirrel cage motors rated to IEC 34 with four pad fixings. The motor insulation is to Class F and and protected to IP55 against dust and water jets. Maintenance free greased for life bearings are L1 life rated. Continuous operating range is from -ºC to +ºC. B form of running- Motor downstream Electrical supply 2-2V single phase 5Hz or -415V three phase 5Hz. Terminal box External terminal boxes are fitted as standard. Most XLCA units up to 63 mm are voltage speed controllable. Non speed controllable models are indicated. Appropriate electronic controllers and 5 step transformer speed controllers are available. XLCA315-14-32 XLCA315-14-3 Fans available from stock Fans available to order 2 pole models 4 pole models 6 pole models 15
Installation A A B C Flexible connector Silencer Antivibration mounts AERO AXIAL B C Dimensions MODEL ØA ØB C E ØF z x ØG J XLCA315 398 3 5 366 8 x 12 2 XLCA355 438 359 225 5 8 x 12 2 XLCA 484 1 25 448 12 x 12 2 XLCA45 534 45 2 4 497 12 x 12 2.5 XLCA5 584 54 315 4 551 12 x 12 2.5 XLCA5 664 565 345 7 629 16 x 14 3 XLCA63 734 634 7 698 16 x 14 3 XLCA71 814 711 45 5 775 16 x 14 3 XLCA 94 797 5 7 861 24 x 14 3 XLCA9 14 894 5 7 958 24 x 14 4 XLCA1 115 13 63 7 167 24 x 14 4 XLCA125 137 125 85 1 1337 32 x 18 4 Xpelair Aerofoil XLCA Long case axial fans 151
Xpelair Aerofoil XLCA Long case axial fans Forms of running Standard form of running B. Arrows indicating correct rotating and direction of airflow are indicated on the outside of the fan case. Ancillaries Xpelair offers a wide range of ancillaries, e.g.: mounting feet for both horizontal or vertical operation matching flanges complete flex. connectors air operated dampers anti-vibration mounts silencers with or without pod Fan selection Select fans within the curve. Do not select above curve end otherwise the fan will work in stall and will be damaged. Fan installation Installation recommendations are as follows: Fans with free inlet and outlet should be installed with 1.5 x fan diameter distance on extract and supply side to the next item of equipment. Fans should have a bellmouth on the air entry to get a smooth airstream. High performance fans will work at higher efficiencies and save energy if diffusers are mounted on the outlet. When installing fans into systems and with other equipment (9º bends, filters, silencers etc) correct bend radius and distance should be considered to avoid losses. Flexible connectors must be installed without kinks in the duct. This guidance will ensure optimum performance. 152
EXAMPLE Required duty point by customer Volume flow : 3,8 m 3 /s static pressure: 5 Pa (for total pressure, add velocity pressure to static pressure - 9 Pa dyn. pressure + 5 Pa static pressure = 1 Pa total pressure) Fan speed: 14 1/min (4-pole) How to use: After having chosen right fan performance curve, mark volume flow and pressure. The intersection on the graph provides the following fan data: motor speed or number of poles 14 rpm - 4-pole pitch angle : degrees fan efficiency : 58 % sound power level: 87 db XLCA 63 Motor power: After peak-absorbed power see chart: 1.24 kw Motor power: 1.5 kw Peak power is the max power over the whole pitch angle in the worst case. Xpelair Aerofoil XLCA Long case axial fans 153
Xpelair Aerofoil XLCA Long case axial fans Quick Selector For individual performance tables and fan curves refer to the following pages Size Performance table Fan curves (page) (page) XLCA315-12 158 17 XLCA315-14 158 17 XLCA355-12 159 171 XLCA355-14 159 171 XLCA-12 1 172 XLCA-14 1 172 XLCA-32 163 172 XLCA-34 163 172 XLCA45-14 161 173 XLCA45-34 164 173 XLCA5-14 161 174 XLCA5-34 164 174 XLCA5-14 162 175 XLCA5-34 165 175 XLCA5-36 165 175 XLCA63-34 166 176 XLCA63-36 166 176 XLCA71-34 167 177 XLCA-34 167 178 XLCA9-34 168 179 XLCA1-34 168 1 XLCA125-34 169 181 2 pole fans 5 355 3 315 1 1 15.56 2.78 4.17 Airflow [m 3 /h] [m 3 /s] 154
Quick Selector 4 pole fans 1 45 5 5 63 71 9 1 125 1 315 355 1 1 1.1 1. 1 1 6 pole fans 1 1 5 63 1 1.1 1 1 Airflow [m 3 /h] [m 3 /s] Airflow [m 3 /h] [m 3 /s] Xpelair Aerofoil XLCA Long case axial fans 155
Xpelair Aerofoil XLCA Long case axial fans Performance Data 2 Pole Single Phase 315mm XLCA315-12-8 XLCA315-12-1 XLCA315-12-12 XLCA315-12-14 XLCA315-12-16 XLCA315-12-18 XLCA315-12- Reference number 91623AA 91624AA 91625AA 91626AA 91627AA 91628AA 91629AA Pitch angle 8º 1º 12º 14º 16º 18º º Nominal fan speed (rpm) 28 28 28 28 28 28 28 Airflow (m 3 /s) 5Pa.46.56.62.7 1Pa.44.52..68.76.82.88 15Pa..48.58.66.72..86 Pa.36.44.54.62.68.76.82 25Pa.32..48.56.64.7.78 3Pa.24.32.36.56.64 Sound pressure level (db(a) @3m) 73 72 72 69 68 68 67 Max electrical power rating (kw).48.48.48.48.48.48.48 Full load current (A) 3.3 3.3 3.3 3.3 3.3 3.3 3.3 Starting current (A) 19.1 19.1 19.1 19.1 19.1 19.1 19.1 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 98AA 98AA 98AA 98AA 98AA 98AA 98AA Starter with thermal overload protection 2 Pole Single Phase 315mm XLCA315-12-22 XLCA315-12-24 XLCA315-12-26 XLCA315-12-28 XLCA315-12-3 XLCA315-12-32 Reference number 9163AA 91631AA 91632AA 91633AA 91634AA 91635AA Pitch angle 22º 24º 26º 28º 3º 32º Nominal fan speed (rpm) 28 28 28 28 28 28 Airflow (m 3 /s) 1Pa.92 15Pa.94 1.2 1.8 1.16 1.24 Pa.88.96 1.4 1.1 1.18 1.24 25Pa.84.92.98 1.6 1.12 1.18 3Pa.76.86.92.98 1.2 1.1 35Pa.76..88.92.98 Sound pressure level (db(a) @3m) 69 69 7 71 72 71 Max electrical power rating (kw).48.48.65.65.65.65 Full load current (A) 3.3 3.3 4.1 4.1 4.1 4.1 Starting current (A) 19.1 19.1 23.8 23.8 23.8 23.8 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 98AA 98AA 98AA 98AA 98AA 98AA Starter with thermal overload protection 4 Pole Single Phase 315mm XLCA315-14-8 XLCA315-14-1 XLCA315-14-12 XLCA315-14-14 XLCA315-14-16 XLCA315-14-18 XLCA315-14- Reference number 9161AA 91611AA 91612AA 91613AA 91614AA 91615AA 91616AA Pitch angle 8º 1º 12º 14º 16º 18º º Nominal fan speed (rpm) 14 14 14 14 14 14 14 Airflow (m 3 /s) 25Pa.22.26.3.34.38.41.44 5Pa.18.22.27.31.34.38.42 75Pa.13.16.18.23.28.33 Sound pressure level (db(a) @3m) 72 71 71 68 67 67 66 Max electrical power rating (kw).3.3.3.3.3.3.3 Full load current (A) 2.1 2.1 2.1 2.1 2.1 2.1 2.1 Starting current (A) 12.2 12.2 12.2 12.2 12.2 12.2 12.2 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA Starter with thermal overload protection 4 Pole Single Phase 315mm XLCA315-14-22 XLCA315-14-24 XLCA315-14-26 XLCA315-14-28 XLCA315-14-3 XLCA315-14-32 Reference number 91617AA 91618AA 91619AA 916AA 91621AA 91622AA Pitch angle 22º 24º 26º 28º 3º 32º Nominal fan speed (rpm) 14 14 14 14 14 14 Airflow (m 3 /s) 25Pa.48.52 5Pa.44.48.52.56.59.63 75Pa.38.43.46.5.52. Sound pressure level (db(a) @3m) 69 68 68 69 69 69 Max electrical power rating (kw).3.3.3.3.3.3 Full load current (A) 2.1 2.1 2.1 2.1 2.1 2.1 Starting current (A) 12.2 12.2 12.2 12.2 12.2 12.2 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA Starter with thermal overload protection 156
Performance Data 2 Pole Single Phase 355mm XLCA355-12-8 XLCA355-12-1 XLCA355-12-12 XLCA355-12-14 XLCA355-12-16 XLCA355-12-18 XLCA355-12- Reference number 91649AA 9165AA 91651AA 91652AA 91653AA 91654AA 91655AA Pitch angle (º) 8º 1º 12º 14º 16º 18º º Nominal fan speed (rpm) 28 28 28 28 28 28 28 Airflow (m 3 /s) 5Pa.76.88 1Pa.7.82.92 1.12 1. 15Pa.66.76.84 1.4 1.14 1.26 1.34 Pa.58.7.78.94 1.6 1.18 1.26 25Pa.52..68.84.96 1.8 1.18 3Pa.44.52..74.88.98 1.8 35Pa.38.44.62.76.84.96 Sound pressure level (db(a) @3m) 74 74 74 74 74 74 69 Max electrical power rating (kw).48.48.48.48.48.65.65 Full load current (A) 3.3 3.3 3.3 3.3 3.3 4.1 4.1 Starting current (A) 19.1 19.1 19.1 19.1 19.1 23.8 23.8 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 98AA 98AA 98AA 98AA 98AA 98AA 98AA Starter with thermal overload protection 2 Pole Single Phase 355mm XLCA355-12-22 XLCA355-12-24 XLCA355-12-26 XLCA355-12-28 XLCA355-12-3 XLCA355-12-32 Reference number 91656AA 91657AA 91658AA 91659AA 916AA 91661AA Pitch angle (º) 22º 24º 26º 28º 3º 32º Nominal fan speed (rpm) 28 28 28 28 28 28 Airflow (m 3 /s) 15Pa 1.48 Pa 1. 1.54 1.68 1.84 25Pa 1.34 1.44 1. 1.72 1.86 2. 3Pa 1.24 1.34 1.48 1. 1.72 1.86 35Pa 1.14 1.24 1. 1.46 1. 1.72 Pa 1.1 1. 1.32 1.5 1.78 45Pa 1. Sound pressure level (db(a) @3m) 69 69 69 7 7 7 Max electrical power rating (kw).65.95.95.95.95.95 Full load current (A) 4.1 6.2 6.2 6.2 6.2 6.2 Starting current (A) 23.8 36. 36. 36. 36. 36. 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 98AA Starter with thermal overload protection 4 Pole Single Phase 355mm XLCA355-14-8 XLCA355-14-1 XLCA355-14-12 XLCA355-14-14 XLCA355-14-16 XLCA355-14-18 XLCA355-14- Reference number 91636AA 91637AA 91638AA 91639AA 913AA 91641AA 91642AA Pitch angle 8º 1º 12º 14º 16º 18º º Nominal fan speed (rpm) 14 14 14 14 14 14 14 Airflow (m 3 /s) 25Pa.35..46.55..67 5Pa.29.34.38.46.53.58.63 75Pa.22.26.29.37.44.49.54 Sound pressure level (db(a) @3m) 58 58 58 58 58 58 52 Max electrical power rating (kw).3.3.3.3.3.3.3 Full load current (A) 2.1 2.1 2.1 2.1 2.1 2.1 2.1 Starting current (A) 12.2 12.2 12.2 12.2 12.2 12.2 12.2 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA Starter with thermal overload protection 4 Pole Single Phase 355mm XLCA355-14-22 XLCA355-14-24 XLCA355-14-26 XLCA355-14-28 XLCA355-14-3 XLCA355-14-32 Reference number 91643AA 91644AA 91645AA 91646AA 91647AA 91648AA Pitch angle 22º 24º 26º 28º 3º 32º Nominal fan speed (rpm) 14 14 14 14 14 14 Airflow (m 3 /s) 5Pa.71.77.84.92 75Pa.62.67.74.81.86.93 1Pa.56.59.66.74.79 Sound pressure level (db(a) @3m) 52 52 52 53 53 54 Max electrical power rating (kw).3.3.3.3.3.3 Full load current (A) 2.1 2.1 2.1 2.1 2.1 2.1 Starting current (A) 12.2 12.2 12.2 12.2 12.2 12.2 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA Starter with thermal overload protection Xpelair Aerofoil XLCA Long case axial fans 157
Xpelair Aerofoil XLCA Long case axial fans Performance Data 2 Pole Single Phase mm XLCA-12-8 XLCA-12-1 XLCA-12-12 XLCA-12-14 XLCA-12-16 XLCA-12-18 XLCA-12- Reference number 91675AA 91676AA 91677AA 91678AA 91679AA 916AA 91681AA Pitch angle 8º 1º 12º 14º 16º 18º º Nominal fan speed (rpm) 28 28 28 28 28 28 28 Airflow (m 3 /s) 5Pa 1.12 1Pa 1.4 1. 1.38 1.64 15Pa.98 1.14 1.28 1.54 1.7 1.86 1.96 Pa.9 1.8 1. 1.44 1. 1.78 1.88 25Pa.84.98 1.8 1.34 1.52 1.68 1. 3Pa.76.9 1. 1.24 1.42 1.58 1.72 35Pa.68..9 1.14 1.34 1.48 1.62 Pa.58.68. 1.2 1.24 1.36 1.5 45Pa.62.86 1.8 1.22 1.36 5Pa.98 Sound pressure level (db(a) @3m) 77 77 77 77 77 77 72 Max electrical power rating (kw).95.95.95.95.95.95.95 Full load current (A) 6.2 6.2 6.2 6.2 6.2 6.2 6.2 Starting current (A) 36. 36. 36. 36. 36. 36. 36. 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Starter with thermal overload protection 2 Pole Single Phase mm XLCA-12-22 XLCA-12-24 XLCA-12-26 XLCA-12-28 Reference number 91682AA 91683AA 91684AA 91685AA Pitch angle 22º 24º 26º 28º Nominal fan speed (rpm) 28 28 28 28 Airflow (m 3 /s) Pa 2.1 25Pa 2.2 2.24 2. 3Pa 1.96 2.8 2.32 2.52 35Pa 1.84 1.98 2.18 2.38 Pa 1.76 1.88 2.8 2.26 45Pa 1.64 1.76 1.96 2.1 5Pa 1. 1.78 1.9 Sound pressure level (db(a) @3m) 71 71 71 71 Max electrical power rating (kw) 1.5 1.5 1.5 1.5 Full load current (A) 9.4 9.4 9.4 9.4 Starting current (A) 45. 45. 45. 45. 5 Step transformer speed controller nsc* nsc* nsc* nsc* Starter with current overload protection 923AA 923AA 923AA 923AA 4 Pole Single Phase mm XLCA-14-8 XLCA-14-1 XLCA-14-12 XLCA-14-14 XLCA-14-16 XLCA-14-18 XLCA-14- Reference number 91662AA 91663AA 91664AA 91665AA 91666AA 91667AA 91668AA Pitch angle (º) 8º 1º 12º 14º 16º 18º º Nominal fan speed (rpm) 14 14 14 14 14 14 14 Airflow (m 3 /s) 25Pa.52..69.82.88 5Pa.45.53..72..89.95 75Pa.38.45.5.62.71.79.86 1Pa.3.34..5.61.68.76 125Pa.48 Sound pressure level (db(a) @3m) 61 61 61 61 61 61 55 Max electrical power rating (kw).48.48.48.48.48.48.48 Full load current (A) 2.1 2.1 2.1 2.1 2.1 2.1 2.1 Starting current (A) 12.2 12.2 12.2 12.2 12.2 12.2 12.2 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA Starter with thermal overload protection 4 Pole Single Phase mm XLCA-14-22 XLCA-14-24 XLCA-14-26 XLCA-14-28 XLCA-14-3 XLCA-14-32 Reference number 91669AA 9167AA 91671AA 91672AA 91673AA 91674AA Pitch angle 22º 24º 26º 28º 3º 32º Nominal fan speed (rpm) 14 14 14 14 14 14 Airflow (m 3 /s) 5Pa 1.6 1. 75Pa.98 1.5 1.15 1.26 1.35 1Pa.88.94 1.4 1.12 1.22 1.3 125Pa.81.9.97 1.8 1.15 Sound pressure level (db(a) @3m) 55 55 55 56 56 56 Max electrical power rating (kw).48.48.48.48.48.48 Full load current (A) 2.1 2.1 2.1 2.1 2.1 2.1 Starting current (A) 12.2 12.2 12.2 12.2 12.2 12.2 5 Step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 8994AA 8994AA 8994AA 8994AA 8994AA 8994AA Starter with thermal overload protection * Not speed controllable 158