CLEW WINCH SYSTEMS Clew winch line sets from Thern Stage Equipment offer the quality and convenience of a fully engineered rigging solution. With over 60 years of hoist experience, you can depend on TSE. Max. Capacity: 2,500 lb Max. Travel Distance: Operation Method : 40 ft Manual or Power Head Block and Loft Blocks See separate block information. Loft Lines See separate rigging information. Clew Kit See separate rigging information. Haul Line See separate rigging information. Clew Winch See winch information on pages 2-10. Batten See separate rigging information. Features and Benefits: Affordable Line Sets provide economical solutions to meet over head rigging needs. Simple and Secure Operation eliminates potential hazards of heavy countweight systems. Complete Engineered Systems designed to work together eliminating the need for multiple equipment suppliers. Modular System Design allows customers to choose the equipment they require for their application. Quality Components Throughout guarantee consistent service life and are backed by a 2 Year Limited Warranty for the complete system. page 1 Thern Stage Equipment 5712 Industrial Park Rd Winona, MN 55987 800.553.2204 fax 507.454.5282 info@thernstage.com www.thernstage.com CWS-1009
CLEW WINCH SYSTEMS Clew Winch Model Max. Capacity: Max. Travel: Cap. at 40 ft: Operation Method: CW11 Series 1,100 lb 40 ft 970 lb Manual or Power CW25 Series 2,500 lb 40 ft 2,500 lb Manual or Power Features and Benefits: Secure Operation with positive load holding brakes and dual drum shaft keys. Secondary Load Holding on manual Clew Winches with lockout pin* (A) to secure drum to frame. Reliable Operation provided by enclosed worm gearing operating in sealed oil bath. Prevent Unauthorized Use on manual Clew Winches with lockout pin* (A) and removable handles. Redundant Haul Lines are standard with double compartment drums (C). *Lock-out pins not used with motorized Clew Winches. Extend Cable Life with grooved drums as standard. Minimize Fleet Angle when clew is close to winch through narrow drum compartments and parallel winding. Convenient Guide Wire Installation using adjustable guide bars (B) with tabs and shaft collars. Easy Attachment of Wire Rope provided by key hole anchors. No tools required. Universal Mounting to wall or base as standard. A B C page 2 Thern Stage Equipment 5712 Industrial Park Rd Winona, MN 55987 800.553.2204 fax 507.454.5282 info@thernstage.com www.thernstage.com CWS-1009
CLEW WINCH SYSTEMS Clew Winch Options and Accessories: D Motorized Clew Winches** (D) for electric power operation include secondary brake, rotary limit switch, and controls. Mounting Options for a variety of installation requirements. Drill Motors available for drill drive operation using hex drive input (E). Drum Modifications for multiple compartment drums or other requirements. **Manual to Motorized Conversion Kits available for fi eld conversion. E page 3 Thern Stage Equipment 5712 Industrial Park Rd Winona, MN 55987 800.553.2204 fax 507.454.5282 info@thernstage.com www.thernstage.com CWS-1009
8 7 6 5 4 3 2 1 D HEAD BLOCK BLOCK INFORMATION LOFT LINES RIGGING INFORMATION LOFT BLOCKS BLOCK INFORMATION D C BATTEN RIGGING INFORMATION 10'-0" TYPICAL C CLEW KIT RIGGING INFORMATION HAUL LINE RIGGING INFORMATION B CW11-2M SHOWN CLEW WINCH SEE WINCH INFORMATION B 3'-2" TYPICAL NOT TO SCALE NOT FOR CONSTRUCTION A 8 7 6 5 4 3 THIS PRINT IS THE PROPERTY OF THERN AND MUST NOT BE REPRODUCED EITHER IN FULL OR IN PART WITHOUT WRITTEN APPROVAL BY THERN. DESCRIPTION JCA CLEW WINCH LINE SET TYPICAL CONFIGURATION DATE 11/4/2009 2 WEIGHT N/A SCALE NTS DRAWING NUMBER REVISION 5712 INDUSTRIAL PARK ROAD WINONA, MN 55987 PHONE 1-800-553-2204 FAX 1-507-454-5282 TOLERANCES UNLESS SPECIFIED FRAC. ± 1" ANGLE ± 5 DO NOT SCALE DRAWING D3499 1 SHEET 1 OF 1 A