Design Overview Input Section Modular Picking Bay Head Section Breaking Axle Powerunit Technical Dimensions Options List
DESIGN MPS modular design allows for the customer to add onto the number of picking bays required as their separation requirements change or production increases. Fully containerised to reduce transport costs Can meet the customer demands by not limiting the number of bays they can choose. 1200mm (48 ) wide conveyor. Wider belts available on request. Heavy duty input section with impact bars and feedboot with additional support legs. Fixed stairway access which complies with all safety regulations Overall stability is provided from heavy duty inner and outer box sections with support stays spanning from each jackleg to conveyor chassis. Conveyor durability is provided with heavy duty side plate and conveyor side frame depth of 1050mm (42 ). Universal sliding platforms on picking bays simplifies installation procedure
8. 7. 9. 10 2. 3. 1. 6. 5. 4. ITEM NO: ASSEMBLY DESCRIPTION ITEM NO: ASSEMBLY DESCRIPTION 1 Left Hand Stair Assembly 6 Front Jacking Legs 2 Braking Axle 7 Conveyor Head Section 3 Rear Jacking Legs 8 Modular Enclosure 4 Chassis Supports 9 Right Hand Stair Assembly 5 Picking Bay 10 Conveyor Tail Section
1200mm (48 ) wide Input section. Wider Input section available on request. Robust design with additional support legs Impact bars to take the impact from feeding material, prolonging the life of the conveyor belt Feedboot capacity of 1.3m³ (46 cubic ft) Extended Feedboot sides and various hopper liners available
Modular design allows for customer to increase bay capacity as and when needs require. Universal sliding platforms on picking bays simplifies installation procedure Heavy duty side plate and conveyor side frame depth of 1050mm (42 ). Standard handrails meet all safety requirements Option of enclosure frame for cladding available which incorporates handrails. Can be easily adopted for fully enclosed heated and ventilated cabin
Diamond lagged drive drum Drive drum Ø 339mm 2.5 self lube triple seal bearings Option of hydraulic or electric drive Option of upgraded belt scrapper Flow control for adjustment of belt speed Overband magnet can be easily attached Walkway for head section also available Upgraded Belt Scraper
Tandem wheeled: 9.5R 17.5.14 Air Brake option as shown Diesel Powerpack, Diesel & Hydraulic tanks will be fitted to Axle
Various power sources available; CAT 2.2 @ 2200 RPM 31KW Electric Direct Drive 7.5KW / 15KW 8HP Petrol Engine with Direct Drive Electric Motors- (Engine for Jacklegs/ Electric motor for conveyor belt) Diesel Genset - Allows for operator to connect to Electric mains Average fuel consumption; CAT2.2 consumes 9.48 ltr/hr @ 100% load (2.5USG) Deutz Tdi 2011 consumes 13.14 Ltr/Hr @ 100% load (3.5USG) Encompasses a Hydraulic Tank with 235ltr (62USG) capacity and a Diesel Tank of 72ltr (19USG) All power systems comply with current emissions laws
Diesel Genset brings to the user a unique trio of Highly efficient running solutions. 1. Diesel / Electric Generator Conveyor belt on the machine can be driven by a Direct Electric Drive. This feature can be up to 40% more efficient than a traditional Diesel / Hydraulic system or indeed other types of Dual Power systems consisting of an Electric / Hydraulic combination. 2. Mains Electric Easily allows the operator to turn off the Genset and switch over to Mains Electric (where available). This is the ultimate in Running Cost efficiency 3. An Edge machine with an inboard Diesel Genset can easily be set up to allow the machine to be powered by another Diesel Electric Machine close by. This has obvious running and maintenance cost advantages.
POWERSOURCE OPTIONS CAT 2.2 (51HP) or CAT2.2 Turbo (68HP) Dual Power-Diesel Electric/Mains Electric 7.5KW / 15KW Overband Magnet Cabins built to customer specifications Impact Bed Auto-lube system Braking Axle
Hydraulic blowers / air knives Hardox lined Hopper Heavy Duty Belts Cabins built to customer specifications; (insulation, lighting, heating and ventilation) Dust suppression system Choice of Static or Mobile with braking axle options available Various Conveyor widths available on request Watch a preview video of the MPS48. Click link below http://www.youtube.com/watch?v=7uirknw8xie&feature=share&list=uuea3zs_1d5bx1 ije LDWtA
EDGE Innovate (NI) Ltd, Head Quarters, 30 Farlough Road, Dungannon, Co. Tyrone, NI BT71 4DT T: +44 (0)28 8774 0525 E: info@edgeinnovate.com F:+ 44 (0) 2887 747244 W: www.edgeinnovate.com The units depicted show all options currently available. Current models may differ from those featured in this brochure. Please contact EDGE to clarify specifications and options. The material in this brochure is of general application for information and guidance only and no representation or warranty is made or given by the manufacturer that its products will be suitable for a customer s particular purpose and enquiry should always be made of the manufacturer to ensure such suitability. Whilst reasonable efforts have been made in the preparation of this document to ensure its accuracy. The manufacturer assumes no liability resulting from errors or omissions in this document or from the use or interpretation of the information contained herein. The manufacturer reserves the right to make changes to the information in this brochure and the product design without reservation and without notification to users.