- POTTERS WHEELS Including - COMPACT - SIT DOWN, CONE DRIVE POTTERS WHEEL No 6 Potters 280mm [11 ] head For details see page 2 - STANDARD - SIT DOWN, CONE DRIVE POTTERS WHEEL No 3 Potters 280mm [11 ] head For details see page 3 No 3 Potters 330mm [13 ] head For details see page 3 No 5 Potters 330mm [13 ] head - ELECTRONIC - SIT DOWN, POTTERS WHEEL Direct Drive Potters For details see page 4 330mm [13 ] head
- COMPACT - SIT DOWN, CONE DRIVE POTTERS WHEEL A Compact Cone Drive AVAILABLE MODELS: 0.18kW (¼ HP) Motor, 280mm (11") WHEELHEAD. ( No 6 ) $1,003.75 DESIGN: Size: 584mm x 482mm x 533mm high. Main bearings: Self lubricating bronze with double "O" ring seals. Weight: 25kg Freewheeling wheel head. Light weight and compact. Corrosion resistant Aluminium tray and wheel head. Steel frame/body zinc plated and powder coated for extreme corrosion resistance. Linkage bearings: Self lubricating polyurethane for vibration damping. Foot operated speed control. Speed range: 30-240 RPM, infinitely variable dependant on foot pedal position. Shaft: 19mm ( ¾") diameter ground steel All internal components zinc plated. Resilient mounted motor for smooth quiet operation. Guaranteed for 12 months against defective parts or faulty workmanship. Low cost. Comfortable padded seat as standard. All control linkages mounted on vibration resistant, lubricated for life polyurethane bearings.
A No 3 Potters - STANDARD - SIT DOWN, CONE DRIVE POTTERS WHEEL Venco No. 3 Full size ergonomic Action pedal 1/2hp motor, 330mm (13 ) wheel head Now with a 3 year warranty Venco No. 3 Stainless steel body option 1/2hp motor, 330mm (13 ) wheel head AVAILABLE MODELS: 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. ( No 3 ) $1208.63 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. Stainless Steel ( No 3 ) $1,350.25 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. ( No 5 ) - with speed lock $1,300.75 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. ( No 5 ) - with speed lock Stainless Steel $1,442.38 DESIGN Shaft: 19mm (¾") diameter ground steel. Weight: 30kg. Size: 685mm x 508mm x 558mm high. Main bearings: Self lubricating bronze with double "O" ring seals. Linkage bearings: Self lubricating polyurethane for vibration damping. All internal components zinc plated. Resilient mounted motor for smooth quiet operation. All control linkages mounted on vibration resistant, lubricated for life polyurethane bearings. One of the hardest wearing wheels available used by many schools world wide. Low cost. Speed range: 30-240 RPM, infinitely variable dependant on foot pedal position Freewheeling wheel head Corrosion resistant Aluminium tray and wheel head. Steel frame/body zinc plated and powder coated for extreme corrosion resistance Light weight and compact. Foot operated speed control. An additional hand operated speed control with or without speed lock is available. Comfortable padded seat available as optional extra. Guaranteed for 12 months against defective parts or faulty workmanship.
- ELECTRONIC - SIT DOWN, POTTERS WHEEL Motor: Direct drive 550W (3/4 HP) permanent magnet - no belts or pulleys (nothing to tension, no belt thump) - brushless design (maintenance free) - ultra quiet and incredible low speed torque OPTIONAL EXTRAS: Clip-on tray shelves - hand oiled plywood with aluminium brackets Standard wheelhead bats - drilled with holes to match wheelhead. (hand oiled plywood) approx 340mm diameter Riser bats - increased thickness bat for increasing the wheelhead height above that of the tray rim for throwing large diameter platters etc. Made from hand oiled plywood. Stand-up kit. - stainless steel extension legs for stad-up throwing. Increases wheelhead height to 84cm (33") from floor level. Leg feet. - extra feet may used to adjust the height of the wheel to personal taste. Up to three feet may be used on each leg. Each foot increases the height of the wheel by 22mm ( 7/8"). A set of three feet (one for each leg) is supplied as standard with each wheel. 330mm (13") wheelhead with two removable bat pins -constructed from marine grade aluminium Die-cast aluminium tray -constructed from marine grade aluminium -very strong even in class-rooms Two legs under wheelhead - where greatest stability is required. Wireless foot pedal (radio control). - no trip hazard - simply put it where ever you want it - speed hold feature; set the speed and take your foot off - ergonomic, low profile pedal Intelligent microprocessor based control system for smooth, precise control - super quiet and smooth can be used as a floor or table model (remove legs) 'easy clean' touch pad control on side of wheel - forward and reverse button - finger-tip speed control buttons perfect for speed control while decorating all stainless steel body and legs. Structure guaranteed for 10 years Energy efficient - low power consumption. 0-300 RPM compact for easy storage CE approved 110V- 240V 50/60hz operation 550W Motor, 330mm (13") WHEELHEAD. $1,605.00
- POTTERS WHEEL SPARE PARTS OPTIONS AVAILABLE: AVAILABLE FOR: $ including GST Three Peg in wheel for fitting bats All s $46.75 Separate Seat Std Cone Drive $165.99 Separate Seat Direct Drive Model $165.99 Seat (Cushion Only) $83.05 Stand-up Kit Std Cone Drive $461.34 Stand-up Kit Direct Drive Model 226.82 Work Tables Per side $87.45 Riser Batt With holws for pegs $72.00 Standard Batt With holes for pegs $50.60 Height Adjustment Feet Direct Drive Model $38.58 SPARE PARTS: AVAILABLE FOR: $ including GST 11 wheel Head + 3/4 shaft No. 6 & No. 3-11 $170.00 13 wheel head + 1 shaft No.3-13 & No.5 $187.00 Drive Assembly All Cone Drive s $145.75 Drive Cone All s $96.25 Hand lever kit No.3 & No.5 $121.00 Foot Peddle No.6, No.3 & No5 $63.25 Motor 180w (1/4HP) + cradle & spring Corresponding s $478.50 Motor 360w (1/2HP) + cradle & spring Corresponding s $528.00 Head Hole set 2 / wheel $12.10 Collars $22.00 O Ring All Cone Drive s $3.08 Fibre Washer All Cone Drive s $2.75 Stainless Steel Washer All Cone Drive s $2.75 Shaft Locke All Cone Drive s $27.50 Springs Small All Cone Drive s $11.55 Spring Large All Cone Drive s $18.15 Resilient Polyurethane shaft mounts All Cone Drive s $3.85 Each