IMT Tire Service Vehicles Tools and Accessories PREDATOr Tire Service Truck 980 Metrostar Tire Service Truck commander Tire Trucks tirehand Tire Manipulators
Tire Service Trucks This is a job for Predator trucks Get your customers back on the job quicker and easier with an IMT Predator tire service truck. Ideal for handling truck and mid-size tires found in construction and other off-road applications, Predator trucks offer plenty of payload capacity, durable center-mount cranes, and heavy-duty compressors. These trucks are designed to make things easy on the operator, with fully integrated systems that employ matched components and applicationspecific features. Predator trucks deliver maximum storage capacity, without cutting into the cargo area. The lockable storage areas are perfect for carrying tools, service books, repair materials, valve and wheel hardware, among other things. When equipped with optional liquid ballast tanks and pumping systems, Predator trucks are easily adapted for servicing agricultural tires as well. Standard features include an aluminum service body, a rotary-screw air compressor system, a hydraulic lift gate, and a premium electrical system. We also offer 24-hour availability on all critical-wear parts, helping you ensure maximum uptime for your customers. Incorporating the needs of service technicians, Predator trucks feature maximum storage capacity while preserving valuable cargo space. 4
The Predator 8511 is ideal for handling truck tires and mid-sized off-road tires. The Predator 8513 features an aluminum service body with enhanced tool storage capacity and is equipped with a rotary-screw air compressor and lift gate. 5
Tire Service Trucks Precision IMT cranes built to perform IMT specialty cranes feature a figure-four design; when mounted on Predator trucks it provides compact stowing and equal distribution of weight. Center-mount cranes offer proper placement of torsional loads and enable quick setup at the job site. Our full line of cranes meets stringent ASME/ ANSI B30.22 industry standards, and they feature a capacity shutdown system to prevent boom overload. They are also equipped with extension cylinders and stabilizer legs to withstand the rigors of changing off-road agricultural and grader tires. The cylinders are fully protected to provide longer component life and reduced maintenance. Prior to assembly, each crane is painted with DuPont Imron 5000 for added durability and finish luster. Customize your vehicle with a choice of options Integrated liquid ballast tank and pumping system 31-inch (78.7 cm) extended rack with adjustable tire support bars Additional adjustable shelving Vehicle identification packages Standard wireless remote controls are fully proportional to enhance the precise positioning of loads and overall crane maneuverability. IMT remotes offer smooth, safe, and visible tire changing operation. Predator Approx. Total Max. Crane Model Payload Available Min. Chassis GVW Capacity @ 10 ft Storage Capacity Deck Cargo Area 8511 Up to 5450 lb (2472 kg) 11,000 lb (4989 kg) N/A 85 cu ft (2.4 m 3 ) 67.1 sq ft (6.2 m 2 ) 8511CR Up to 5450 lb (2472 kg) 15,000 lb (6804 kg) 3000 lb (1361 kg) 85 cu ft (2.4 m 3 ) 67.1 sq ft (6.2 m 2 ) 8513 Up to 6250 lb (2835 kg) 11,000 lb (4989 kg) N/A 85 cu ft (2.4 m 3 ) 81.3 sq ft (7.6 m 2 ) 8513CR Up to 6250 lb (2835 kg) 17,500 lb (7938 kg) 3000 lb (1361 kg) 85 cu ft (2.4 m 3 ) 81.3 sq ft (7.6 m 2 ) 8516 Up to 8700 lb (3946 kg) 19,000 lb (8618 kg) N/A 89 cu ft (2.5 m 3 ) 100 sq ft (9.3 m 2 ) 6
Predator 8511, 8511CR, 8511AG and 8511CRAG IMT farm tire trucks are durable trucks that can carry payloads from up to 8700 lb (3946 kg). Standard features: Designed for 11,000- to 23,000-pound (4989 to 10,432 kg) GVW chassis Corrosion-resistant aluminum construction Series 60 direct-drive rotary screw air compressor 60 cfm at 150 psi (28.3 L/s at 10.3 bar) Automotive-type weatherproof wire harnessing for the electrical system Standard light package includes four-corner visible strobes, full compartment lighting, and full work-area flood lights 1600-pound (725.7 kg) hydraulic rear lift gate Predator 8513, 8513CR, 8513AG and 8513CRAG IMT farm tire trucks are durable trucks that can carry payloads from 1850 to 8516 pounds. Standard features: Designed for 11,000- to 23,000-pound (4989 to 10,432 kg) GVW chassis Corrosion-resistant aluminum construction Series 60 direct-drive rotary screw air compressor 60 cfm at 150 psi (28.3 L/s at 10.3 bar) Automotive-type weatherproof wire harnessing for the electrical system Standard light package includes four-corner visible strobes, full compartment lighting, and full work-area flood lights 1600-pound (725.7 kg) hydraulic rear lift gate Predator 8516, 8516CR, 8516AG and 8516CRAG The 11-foot and 13-foot Predator mini-boom trucks feature a crane for specific tire-handling applications. Standard features: Designed for 15,000- to 20,000-pound (6803.8 to 9071.8 kg) GVW chassis 11-foot and 13-foot corrosion-resistant aluminum bodies Series 85 direct-drive rotary screw air compressor 85 cfm at 150 psi (40.12 L/s at 10.3 bar) 30,000 ft-lb (4.2 tm) articulating crane with capacity from 5000 pounds at 6 feet to 1950 pounds at 15 feet (2267.9 kg at 1.8 m to 884.5 kg at 4.6 m) Handles up to 29.5 x 29 tire with rim or 33.25 x 39 tire up to 3000 pounds (1360.7 kg) 1600-pound (725.7 kg) hydraulic rear lift gate 7
Tire Service Trucks Get around town faster with MetroStar The 980 MetroStar is an agile unit that is perfect complement to any commercial service fleet. It s highly maneuverable and loaded with storage space, making it ideal for quick-response highway service and in-town tire repair. Every feature of the 980 MetroStar has been designed with commercial users in mind. With its 31 cubic feet of storage and 44.5-square-foot deck cargo area, the 980 MetroStar can haul up to 12 truck tires and all your tools. It s also equipped with a heavy-duty hydraulic lift gate, a compressor, and two hoses for air tools and tire inflation. 980 MetroStar tire trucks are durable trucks that can carry payloads from 1850 to 8516 pounds (839.1 kg to 3862.8 kg). Standard features: Designed for 56-inch (142.2 cm) CA 3/4- or 1-ton single, rear-wheel chassis Cargo deck can hold up to 12 truck tires Series 60 direct-drive rotary screw air compressor 60 cfm at 150 psi (28.3 L/s at 10.3 bar) Standard light package includes amber beacon light, full compartment lighting, and full work-area flood lights 1000-pound (453.6 kg) hydraulic rear lift gate Each 980 MetroStar is designed as an agile unit for commercial fleet service. 8
Approx. Total Model Payload Available Min. Chassis GVW Storage Capacity Deck Cargo Area 980 MetroStar Up to 1850 lb (839 kg) 8800 lb (3992 kg) 27.5 cu ft (0.8 m 3 ) 44.5 sq ft (4.1 m 2 ) 9
Tire Trucks Big tires, tall jobs short work for Commander trucks Built tough for the most punishing off-road conditions, Commander tire trucks deliver unsurpassed performance. They are fully integrated packages designed for optimal reliability and efficiency for agricultural, commercial, construction, and mining applications. Available in four models to better fit a variety of applications, Commander trucks feature strategically placed hose reels, efficiently designed storage areas, adjustable shelving, and steel pullout drawers, giving you plenty of room for tools without sacrificing payload capacity. The trucks are also equipped with on-demand air, wireless remote controls for precise load positioning and enhanced maneuverability, and the powerful IMT TireHand tire manipulator. It s a powerful package designed to keep your customers downtime to an absolute minimum. Commander tire trucks include plenty of tool storage space. 10
Extension outrigger cylinders are designed to withstand the rigors of changing off-the-road tires. Storage areas offer the ultimate in tool storage without sacrificing payload capacity. 11
Tire Truck Features Built to perform, even on the toughest jobs Our full line of Commander models meet stringent ASME/ANSI B30.22 industry standards. Capacity shutdown systems on select models eliminate boom overload, and a counterbalance valve system prevents sudden cylinder collapse in the event of hose failure and uncontrolled boom drift. The lighting and electrical systems incorporate a clearly labeled, automotive-type weatherproof wiring harness. These systems operate independently from the chassis systems. Easy-to-use, easy-to-see, lighted rocker switches control the strobe warning light, compartment lights, and floodlights, and indicate which circuits are in operation. An unlighted switch in the on position acts as a blown-fuse indicator. DuPont Imron 5000 paint, standard on all factorypainted vehicles, provides an outstanding finish with high luster and durability. Compressed air system provides air on demand and is excellent for heavy-duty use. Each system includes two 1/2-inch x 50-foot air hose reels, an in-line moisture separator, an air regulator and oiler, an engine speed controller, and an air receiver. The exclusive IMT industrial compressed air cooler and filtration system allows air tools to operate with cool, dry, clean air the coolest, driest air in the industry extending tool life. Commander Min. Chassis Max. Crane Max. Tire Weight Approx. Total Model Gross Vehicle Weight Capacity @ 10 ft with TireHand Payload Available* (excluding tools) I 26,000 lb (11,793 kg) 5200 lb (2359 kg) N/A Up to 8500 lb (3856 kg) II 29,000 lb (13,154 kg) 7400 lb (3357 kg) Up to 3000 lb (1361 kg) Up to 10,000 (4536 kg) III 33,000 lb (14,968 kg) 12,000 lb (5443 kg) Up to 5000 lb (2268 kg) Up to 7000 lb (3175 kg) IV 60,000 lb (27,215 kg) 22,500 lb (10,206 kg) Up to 14,000 lb (6350 kg) Up to 13,000 lb (5897 kg) *Payload dependent on chassis tire weight. TireHand Model Tire Size Capacity Max. Capacity Crane Capacity Range TH7 24.00-49 with rim 37.5-39 Up to 3000 lb 12,000 lb @ 6' 4700 lb @ 15' 1" TH10 27.00-49 with rim 45/65-45 Up to 5000 lb 14,000 lb @ 7' 8000 lb @ 16' 2" 14K160 55/80-63 with rim 53.5/85-57 Up to 14,000 lb 15,000 lb @ 15' 7" 25,000 lb @ 8' 12
Commander I The Commander I model is an all-around service unit for commercial truck, agriculture, and contractor tire service applications. Designed for a 26,000-pound (11,793.4 kg) GVW chassis, this truck meets most non-cdl driver requirements. Rugged steel construction for versatile tire payload capability up to 8500 pounds (3855.5 kg) 1600-pound (725.7 kg) hydraulic rear lift gate Chassis, crane, and compressor hour meters for easy planned maintenance Commander II The Commander II truck is an all-around service unit for contractor and mine tire service applications, designed for a 26,000- to 33,000-pound (11,793.4 to 14,968.5 kg) GVW chassis, meeting some non-cdl driver requirements. Rugged steel construction for versatile tire payload capability up to 10,000 pounds (4535.9 kg) Chassis, crane, and compressor hour meters for easy planned maintenance Standard full compartment illumination with flood lights and work lights in recessed body pockets Commander III The Commander III truck is an all-around service unit for contractor and mine tire service applications designed for a 33,000-pound (14,968.5 kg) GVW single-axle or larger tandem chassis. Rugged steel construction for versatile tire payload capability up to 8600 pounds (3900.9 kg) Weatherproof, undercoated, galvannealed steel tool compartments with 87 cu ft (2.5 m 3 ) capacities 26-inch (66 cm) rollout drawers and compartments with adjustable shelving and dividers Commander IV Commander IV models provide all-around service for mine tire service applications designed for a 60,000-pound (27,215.5 kg) GVW tandem chassis. Rugged steel construction provides for versatile tire payload capability up to 12,000 pounds (5443.1 kg) Large 82-inch (208.3 cm) front compartments with rollout doors for more storage Heavy-duty front bulkhead makes room for compressor components 13
TireHand Tire Manipulators Get your hands on a TireHand tire manipulator TireHand tire manipulators are the industry standard for installing and rotating the massive tires found in the mining and construction industries. They can accommodate tires up to 25,000 pounds, and are available in loader or forklift truck-mounted options Each model features 390-degree body rotation, allowing the operator to make adjustments from the security of the integrated control console. Other features include lateral shifting capabilities, optional quick-coupler attachments, and multiple-site vehicle packages. A more efficient and safe approach to changing massive tires Precise placement is a critical factor in tire change efficiency. The more precise the tire placement, the faster and easier the entire process is. That s why our TireHand manipulators offer an unbeatable combination of features to deliver an unmatched range of motion and control. It s a safe, efficient way for an operator to hydraulically grip, pull, lift, turn, and position the biggest tires. The IMT TireHand manipulator offers the fastest, most reliable way to mount and dismount massive tires. 14
TireHand Model TireHand Weight Tire Size Capacity Max. Capacity Clamping Span TH1449A 2020 lb (916.3 kg) 18-25 37.5-39 4200 lb (1905 kg) 50" 110" (127 279.4 cm) TH2551B 8640 lb (3920 kg) 18-25 50/65-51 10,000 lb (4536 kg) 52" 135" (132.1 342.9 cm) TH2557B 8100 lb (3674 kg) 23.5-25 53.5/85-57 13,000 lb (5897 kg) 43" 160" (109.2 406.4 cm) TH3565 16,600 lb (7530 kg) 18-25 58/80R63 25,000 lb (11,340 kg) 41" 164" (104 417 cm) 15
Tire Tools From jacks to hooks to breakers and more, we can equip your tire trucks with the tools and accessories you need to offer your customers top-notch tire service. IMT 210 BeadBreaker Works on single and multi-piece rims for ag and industrial use. IMT 300 Dual BeadBreaker Designed for ag and industrial applications; requires just 4½ inches of operating space. IMT 1000 BeadBreaker Designed to unseat heads on OTR tires up to 29". IMT 150 Backside Bead Push-Off Tool Provides a third hand to help in tractor and combine tire removal. 16
IMT 6000-lb Bead-seat Band and Rim Puller Four-point chain puller with swivel hook works with tire-handling crane to remove band and base from OTR tires. IMT Hydraulic Push Ram Compact and powerful to push off backside beads on earthmover tires with five-piece rims. IMT Air-Driven Tire Pumper Continuous-duty tire pumper for calcium-chloride service in the field, in the shop, or on a service truck. IMT 1800 Multi-piece Rim BeadBreaker Designed to unseat tire beads on large rims all the way up to 63-inch OTR rims used on earthmovers. IMT Pushbar Allows easy removal of lock ring and O-ring on multipiece OTR rims up to 39 inches in diameter. IMT 1000 BeadBreaker Mfr. No. 51718925 IMT 210 BeadBreaker Mfr. No. 79075107 IMT 300 Dual BeadBreaker Mfr. No. 51705003 IMT 150 Backside Bead Push-off Tool Mfr. No. 92091150 IMT 6000-lb Bead-seat Band and Rim Puller Mfr. No. 51701928 IMT Air-driven Tire Pumper Mfr. No. 51709777 with hoses and ejector; Weight: 63 lb (29 kg) Mfr. No. 51714060 less hoses and ejector; Weight: 51.5 lb (25.5 kg) IMT Pushbar Mfr. No. 92091001 IMT Hydraulic Push Rams Mfr. No. 79075026 10-ton ram 2-1/4" stroke, 5-1/2" collapsed height, 5 lb (2 kg) Mfr. No. 79075025 10-ton ram 6-1/8" stroke, 10" collapsed height, 10 lb (4 kg) Mfr. No. 79075024 10-ton ram 10-1/8" stroke, 14" collapsed height, 14 lb (6 kg) Mfr. No. 79085057 30-ton ram 2-1/16" stroke, 5" collapsed height, 15 lb (7 kg) IMT 1800 Multi-piece Rim BeadBreaker Mfr. No. 51704331 17
Tire Tools IMT Air/Hydraulic Pump Used to power agricultural, industrial, and OTR beadbreaking tools, as well as 55- and 100-ton jacks. IMT 100-ton Aluminum Jack Features 100-ton lift capacity and high-pressure shutoff valve. IMT 55-ton Aluminum Jack Suited for most heavy-lift applications in the shop or on the job site. 18
IMT Crib Set Set of 3-inch, 6-inch, and 9-inch steel cribs can be used individually or stacked together. IMT Locking Tire Sling Designed for damage-free lifting and positioning of tires over rim bases; built for tires up to 14,000 pounds. IMT Portable Calcium-Chloride Pumping System Available in a portable shop or field-service system with 300- and 400-gallon tanks. IMT Dry Oak Cribbing Blocks Available in sets of eight or 16. IMT Earthmover Bead Hooks Rated 18,000-pound capacity for quick handling of salvage tires. IMT Earthmover Bead Hook with Extended Arm Ideal for OTR salvage tires of larger diameters; 14,000-pound rated capacity. IMT Ag and Industrial Bead Hook Designed for quick handling of agricultural and industrial salvage tires; 2,000-pound rated capacity. IMT Air/Hydraulic Pump Mfr. No. 51705747 1.25 gal capacity with high-impact plastic reservoir 22 lb (10 kg) Mfr. No. 51704503 2-gal capacity with steel reservoir 31 lb (14 kg) IMT 55-ton Aluminum Jack Mfr. No. 51704499 6" stroke, 12" collapsed height 25 lb (11 kg) Mfr. No. 51712504 10" stroke, 16" collapsed height 41 lb (18 kg) IMT 100-ton Aluminum Jack Mfr No. 51704501 IMT Crib Set Mfr No. 70732492 IMT Portable Calcium Chloride Pumping System Mfr. No. 29000302 300-gal 38"Hx76.5"Lx38"W, 400 lb Mfr. No. 29000303 300-gal with rinse system 41"Hx76.5"Lx54"W, 475 lb Mfr. No. 29000402 400-gal 48"Hx76.5"Lx43"W, 450 lb Mfr. No. 29000403 400-gal with rinse system 48"Hx76.5"Lx59"W, 525 lb IMT Earthmover Bead Hooks Mfr. No. 52712702 IMT Earthmover Bead Hook with Extended Arm Mfr. No. 52712854 IMT Ag and Industrial Bead Hook Mfr. No. 60103652 IMT Locking Tire Sling Mfr. No. 92091005 10,000 lb Weight: 55 lb (25 kg), 102" diameter capacity Mfr. No. 92091003 14,000 lb Weight: 117 lb (53 kg), 122" diameter capacity IMT Dry Oak Cribbing Blocks Mfr. No. 92733437 8-block set 2 4" x 4" x 19", 2 6" x 6" x 19 2 4" x 10" x 19", 2 2" x 8" x 19 137 lb (68 kg) Mfr. No. 92073078 16-block set 2 4" x 4" x 19", 3 6" x 6" x 19 3 8" x 8" x 19", 3 4" x 10" x 19 3 6" x 10" x 19", 2 2" x 8" x 19 465 lb (230 kg) 19