Trailers and cranes for forestry and construction work
More than a centu Swedish ma 2 VRETEN AB
ry of high-quality nufacturing Vreten forestry products are the natural choice for foresters who want sturdy trailers and cranes that provide many years of trouble-free service. t only do we develop all of our products ourselves, but we can also guarantee that our products are of uniform and high quality since all of our manufacturing is done in Sweden. The little town of Vreten (just south of Sköde) has been the company's base since initiation back in the 1880s. From here, countless numbers of axes, ploughs, trailers and cranes have been supplied to farmers, foresters and contractors who demand the very best. Our long tradition of design and manufacturing has helped us develop the expertise and craftsmanship which now stand as core qualities of what we lovingly refer to as "vretenskap" the science of Vreten. MOST COMPLETE RANGE OF CRANES ON THE MARKET Vreten offers a broad range of cranes with ranges from 5.1 m to 8.1 m. We recently expanded our range even further with easy-to-handle parallel cranes, which require less hydraulic oil fl ow and can therefore be connected to even smaller models of tractors. The cranes are operated with a mechanical valve, a servo-assisted hydraulic valve or an electric proportional valve. TRAILERS WITH OR WITHOUT AUXILIARY DRIVE The trailer range is made up of models that can handle loads ranging from 7 to 14 tonnes. The biggest models have an auxiliary drive in the form of a hydraulic reel drive that drives all four wheels. Vreten dealers are at your service to adapt couplings between tractor and trailer/crane as necessary. The trailer and crane range is supplemented by a large range of accessories for even more applications. VRETEN AB 3
Trailers Vreten offers a broad range of trailers to meet a number of different needs. All models are made of high-quality steel in our workshops in Vreten. The trailers can be fi tted with different crane models. Some models are also available with roller or hub motor operation to improve manoeuvrability. 4 TRAILERS
VRETEN 1400 4WD Professional trailer for anyone who demands functionality and strength. Frame steering behind gate for best manoeuvrability. Double frame steering cylinders make the unit work smoothly, even in tough terrain. The trailer has high ground clearance and a smooth underside. Trailer data SVR 1400 4WD Load area 3.1 m 2 Carrying capacity above wheels 15,000 kg Total length 6.0 m Total width 2.38 m Centre frame 220x220 Tractor output, approx. 85-130 hp Shaft journals 90 mm Hydraulic motor 620 cm 3 3,400 kg 4WD via own pump Power output kw/hp 50kW/68 hp Fixed flow, trailer pump 90 l/min Operating pressure 190 bar Pulling power 2,900 kp 4WD via tractor Power output kw/hp Oil flow via tractor Pulling power at 185 bar operating Wheels Pump and tank Electric valve joystick for controlling trailer operation 500/60x22.5 Frame steering with double cylinders Yes Pivoting stays 6 Removable stays Hydraulic disc brakes 2 wheels Lighting equipment Yes Hydraulic disc brake Alternative wheels Hydraulic support legs With or without carriage stays 2 Suitable crane 680SE, 810DE, 77-30, 62-50, 62-50L TRAILERS 5
VRETEN 1200 4WD Powerful trailer for anyone who demands functionality and strength. Frame steering behind gate for best manoeuvrability. Double frame steering cylinders make the unit work smoothly, even in tough terrain. The trailer has high ground clearance and a smooth underside. Trailer data SVR 1200 4WD Load area 2.6 m 2 Carrying capacity above wheels 13,000 kg Total length 5.8 m Total width 2.2 m Centre frame 200x200 Tractor output, approx. 65-100 hp Shaft journals 80 mm Hydraulic motor 470 cm 3 2,700 kg 4WD via own pump Power output kw/hp 44kW/60 hp Fixed flow, trailer pump Approx. 90 l/min Operating pressure 190 bar Pulling power 2,600 kp 4WD via tractor Power output kw/hp Oil flow via tractor Pulling power at 185 bar operating Wheels Pump and tank Electric valve joystick for controlling trailer operation 24 kw/32 hp 60-90 l/min 1,300 kp 400/55x22.5 Frame steering with double cylinders Yes Pivoting stays 6 Removable stays Hydraulic disc brakes Lighting equipment Hydraulic disc brake Alternative wheels 500/60x22.5 Hydraulic support legs With telescope or carriage stays 2 Suitable crane 680SE, 77-30, 65-40, 62-50, 62-50L 6 TRAILERS
VRETEN 1100 Double beam trailer A complete, multi-purpose trailer for all seasons and all needs. A trailer and crane combination makes it possible for you to handle many diffi cult jobs quite easily. Trailer data VRETEN 1100 Load area 2.4 m 2 Carrying capacity above wheels 11,000 kg Total length 5.3 m Total width 2.25 m Centre frame Double frame Tractor output, approx. 40-90 hp Shaft journals 70 mm Hydraulic motor 393 cm 3 1,900 kg 4WD via own pump Power output kw/hp Fixed flow, trailer pump Operating pressure Pulling power 4WD via tractor Power output kw/hp Oil flow via tractor Pulling power at 185 bar operating Wheels Pump and tank Electric valve joystick for controlling trailer operation 20 kw/27 hp 50-65 l/min 1,000 kp 400/60x15.5 Frame steering with double cylinders Yes Pivoting stays 6 Removable stays Hydraulic disc brakes Lighting equipment Hydraulic disc brake Alternative wheels 400/55x22.5 Hydraulic support legs Telescope stays Suitable crane 51-40, 53-50, 60-30, 65-40, 77-30, 61-40, 61-40L TRAILERS 7
VRETEN 1000 Vreten 1000 is a powerful yet fl exible trailer. It combines the adaptability and fl exibility of a centre beam trailer with the stability of a double frame trailer. Combined with one of our grapple loaders, it meets most needs. Trailer data VRETEN 1000 Load area 2.3 m 2 Bearing capacity over wheels 10,000 kg Total length 4.9-5.9 m Total width 2.15 m Centre frame 180x180 Tractor output, approx. 45-80 hp Shaft journals 70 mm, kg 1,400 Wheels 400/60x15.5 Frame steering with double cylinders Yes Pivoting stays 6 Removable stays Hydraulic disc brakes Removable 3-point Alternative wheels 500/50x17 Hydraulic support legs Telescope Lighting equipment Hydraulic drive, 2WD Own hydraulics, oil tank on trailer Suitable crane 51-40, 53-50, 60-30, 65-40, 77-30, 61-40, 61-40L Frame steering The cylinders are well-protected under protective plates 8 TRAILERS
VRETEN 900 Vreten 900 is a classic, tried-and-true centre beam trailer with movable bunks. When combined with for example Vreten's 56-30 crane, you get an unbeatable and fl exible unit at a reasonable price. Trailer data VRETEN 900 Load area 2.1 m 2 Carrying capacity above wheels 9,000 kg Total length 5.1 m Total width 2.25 m Centre frame 160x160 Tractor output, approx. 40-70 hp Shaft journals 70 mm 1,100 kg Wheels 400/60x15.5 Frame steering with double cylinders Yes Pivoting stays 6 Removable stays Hydraulic disc brakes Removable 3-point Alternative wheels Hydraulic support legs Telescope Lighting equipment Hydraulic drive, 2WD Own hydraulics, oil tank on trailer Suitable crane 51-40, 53-50, 60-30, 65-40, 56-30 TRAILERS 9
VRETEN 700 A "dainty" forest trailer with a simple design that provides value for money and is suitable for lighter forestry work. Trailer data VRETEN 700 Load area 1.9 m 2 Carrying capacity above wheels 7,000 kg Total length 5.1 m Total width 1.9 m Centre frame 140x140 Tractor output, approx. 40-70 hp Shaft journals 70 mm 900 kg Wheels 11.5x15 Frame steering with single cylinder Yes Pivoting stays 4 Removable stays Hydraulic disc brakes Removable 3-point Alternative wheels 400/60x15.5 Hydraulic carriage legs Yes Lighting equipment Hydraulic drive Own hydraulics, oil tank on trailer Suitable crane 51-40, 50-25 Carriage leg 10 TRAILERS
Knuckle boom cranes Vreten's range of conventional knuckle boom cranes offers several choices for those who demand a lot from their crane. With a robust design, these cranes are excellent for big loads with tough and demanding lifts. KNUCKLE BOOM CRANES 11
KNUCKLE BOOMCRANES GRAPPLE LOADER 51-40 Valve rdhydraulik 210 multi-lever Rotator FR 07 Grapple 0.2 34 knm Lifts of 4 metres without grapple 800 kg Lifts at max. reach without grapple 400 kg Reach 5.1 m Hydraulic extension Recommended pump capacity, l/min 30-60 System pressure, MPA 18.5 Slewing angle, slew motor 360 12 knm 740 kg Bolted joint Ø 300. of slewing cylinders 2 (2 extra can be ordered) Hydraulic support legs Servo-assisted hydraulics Electric proportional control GRAPPLE LOADER 53-50 Valve rdhydraulik 210 2-lever Rotator FR 07 Grapple 0.2 40 knm Lifts 4 metres without grapple 1,000 kg Lifts at max. reach without grapple 600 kg Reach 5.3 m Hydraulic extension Recommended pump capacity, l/min 40-70 System pressure, MPA 18.5 Slewing angle, slew motor 360 12 knm 810 kg Bolted joint Ø 300. of slewing cylinders 4 Hydraulic support legs Servo-assisted hydraulics Electric proportional control 12 KNUCKLE BOOM CRANES
KNUCKLE BOOMCRANES GRAPPLE LOADER 60-30 Valve rdhydraulik 210 2-lever Rotator FR 07 Grapple 0.2 34 knm Lifts of 4 metres without grapple 850 kg Lifts at max. reach without grapple 400 kg Reach 6 m Hydraulic extension 1.2 m Recommended pump capacity, l/min 30-60 System pressure, MPA 18.5 Slewing angle, slew motor 360 12 knm 830 kg Bolted joint Ø 300. of slewing cylinders 4 Hydraulic support legs Servo-assisted hydraulics Electric proportional control GRAPPLE LOADER 65-40 Valve rdhydraulik 210 2-lever Rotator FR 07 Grapple 0.2 40 knm Lifts of 4 metres without grapple 950 kg Lifts at max. reach without grapple 500 kg Reach 6.5 m Hydraulic extension 1.2 Recommended pump capacity, l/min 40-70 System pressure, MPA 18.5 Slewing angle, slew motor 360 12 knm 920 kg Bolted joint Ø 300. of slewing cylinders 4 Hydraulic support legs Servo-assisted hydraulics Electric proportional control KNUCKLE BOOM CRANES 13
KNUCKLE BOOMCRANES GRAPPLE LOADER 680SE Valve rdhydraulik 210 2-lever Rotator FR 10 Grapple 0.26 48 knm Lifts of 4 metres without grapple 1,300 kg Lifts at max. reach without grapple 670 kg Reach 6.8 m Hydraulic extension 1.3 m Recommended pump capacity, l/min 50-80 System pressure, MPA 19 Slewing angle, slew motor 410 18 knm 1,050 kg Bolted joint 350x350. of slewing cylinders 4 Hydraulic support legs Servo-assisted hydraulics Electric proportional control GRAPPLE LOADER 77-30 Valve rdhydraulik 210 2-lever Rotator FR 07 Grapple 0.20 40 knm Lifts of 4 metres without grapple 850 kg Lifts at max. reach without grapple 300 kg Reach 7.7 m Double hydraulic extension 2.4 m (2x1.2 m) Recommended pump capacity, l/min 45-70 System pressure, MPA 18.5 Slewing angle, slew motor 360 kg Bolted joint Ø 300. of slewing cylinders 4 Hydraulic support legs Servo-assisted hydraulics Electric proportional control 14 KNUCKLE BOOM CRANES
KNUCKLE BOOMCRANES GRAPPLE LOADER 810DE Valve rdhydraulik 210 2-lever Rotator FR 10 Grapple 0.26 48 knm Lifts of 4 metres without grapple 1,260 kg Lifts at max. reach without grapple 580 kg Reach 8.1 m Hydraulic extension 2.6 Recommended pump capacity, l/min 50-80 System pressure, MPA 19 Slewing angle, slew motor 410 18 knm 1,100 kg Bolted joint 350x350. of slewing cylinders 4 Hydraulic support legs Servo-assisted hydraulics Electric proportional control KNUCKLE BOOM CRANES 15
Parallel cranes Vreten's parallel cranes are designed with the latest technology for simple operation, manoeuvrability, speed and precision. With the help of a folding cylinder, the crane tip can be moved in a straight path, parallel to the ground. The parallel crane requires less oil fl ow than traditional cranes, which means that it can even be used with smaller tractors. 16 PARALLEL CRANES
PARALLEL CRANES GRAPPLE LOADER 50-25 Rotator FR 07 Grapple G-16 24 knm Lifts at max. reach 385 kg Reach 5 m Hydraulic extension Recommended pump capacity, l/min 35 System pressure, MPA 17.5 Slewing angle, slew motor 360 6 knm 400 kg GRAPPLE LOADER 56-30 Rotator FR 07 Grapple G-20 29 knm Lifts at max. reach 410 kg Reach 5.7 m Hydraulic extension Recommended pump capacity, l/min 40 System pressure, MPA 17.5 Slewing angle, slew motor 380 9 knm 440 kg PARALLEL CRANES 17
PARALLEL CRANES GRAPPLE LOADER 61-40 Rotator FR 07 Grapple G-26 40 knm Lifts at max. reach 475 kg Reach 6.1 m Hydraulic extension Recommended pump capacity, l/min 50 System pressure, MPA 18 Slewing angle, slew motor 380 12 knm 625 kg GRAPPLE LOADER 61-40L Rotator FR 07 Grapple G-26 40 knm Lifts at max. reach 390 kg Reach 7.3 m Hydraulic extension 1.2 m Recommended pump capacity, l/min 50 System pressure, MPA 18 Slewing angle, slew motor 380 12 knm 675 kg 18 PARALLEL CRANES
PARALLEL CRANES GRAPPLE LOADER 62-50 Rotator FR 10 Grapple G-26 48 knm Lifts at max. reach 525 kg Reach, metres 6.2 Hydraulic extension Recommended pump capacity, l/min 60 System pressure, MPA 18 Slewing angle, slew motor 400 18 knm 840 kg GRAPPLE LOADER 62-50L Rotator FR 10 Grapple G-26 48 knm Lifts at max. reach 450 kg Reach 7.5 m Hydraulic extension 1.3 m Recommended pump capacity, l/min 60 System pressure, MPA 18 Slewing angle, slew motor 400 18 knm 910 kg PARALLEL CRANES 19
Viewes from the factory 20 VRETEN CUT
VRETEN CUT 18 Vreten Cut 18 is designed for energy wood. It s booth for loading and for simultaneous felling of energy wood. Vreten Cut 18 is constructed with fixed knife and it s easy to service. To switch the felling head in the loader is quick and no additional hosing is necessary. Vreten Cut 18 is made in Swedish steel and of course made by Vreten AB in Sweden. VRETEN CUT 18 Technikal spec Mamimal cutting diamete Mamimal opening of the grapel Approximate weight *Depending on the wood material 180mm* 900mm 150kg VRETEN CUT 21
Accessories Vreten offers an extensive range of accessories that help adapt the trailers and cranes to other tasks, such as winching, excavating and lifting different material. WINCH VR 1700 Gear-driven winch for mounting on crane book with drive, stop and release mode. Also available in radio-controlled version. EXCAVATION ATTACHMENT Excavation attachment for Vreten grapple loader, complete with bucket. Different attachments for different models. WINCH VR 1700 Technical data EXCAVATION ATTACHMENT Bucket dimensions Pulling power 1,700 kp Width 53 cm Wire 40 m with 6 mm hook Depth 60 cm Oil pressure 175 bar Welded, toothed edge Oil flow 45 l/min Line speed 0.45 m/sec 22 ACCESSORIES
ACCESSORIES CLAMSHELL BUCKET The Vreten clamshell bucket is the perfect tool for jobs such as clearing ditches and lighter excavation work. BRUSH GRAPPLE Vreten's brush grapple is an excellent tool for making quick work of lighter material. CLAMSHELL BUCKET Bucket data G 73 G 100 BRUSH GRAPPLE Technical data Max. opening 120 cm 120 cm Width 73 cm 100 cm Capacity 100 L 130 L 170 kg 200 kg Max. opening Width 138 cm 78 cm 150 kg ROUND BALE GRAPPLE Combines perfectly with our tipper platform. A practical and extremely useful solution. 4WD 4WD is available for some Vreten trailers. This is particularly useful for those working in diffi cult terrain. ACCESSORIES 23
meiro.se Svärd & Söner Tryckeri AB Vreten AB, 541 94 Skövde Tel +46 (0)500-45 70 00 Fax +46 (0)500-46 65 29 www.vreten.se Vreten retains the right to make price and design modifications without prior notice. We reserve the right to correct any misprints.