Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28 mount accelerometers. Rain tight & ex-proof for CSA Class 1, Grps A-D, Div.1. 1/4 NPT stud for mounting to machine case. 1 NPT top conduit union. Zinc Plated 7084-002 Flange Mount 7295-002 For surface mounting of 7295 housing. 1/4 NPT center hole. 3 equally spaced 6.6 (.26) dia. mount holes on 38 (1.50) dia. circle. 99506-020 99506-021 9061-XXXX Magnetic Mount Magnetic Mount Bulk Cable 99506-040 Mounting Pad SA6200A-X0X; SV6300A-001 SA6200A-X1X; SV6300A-011 8978-200-0000 SA6200A, ST6900 Series & SV6300A Strong rare earth magnet provides up to 16 kg [35 lbs] pull force for temporary mounting of 1/4-28 tapped accelerometers. Housing has 1/4-28 center hole & includes sensor mounting stud. Same as 99506-020 except metric version. Housing has M6X1 center hole and comes with matching sensor mounting stud..250 dia. bulk cable with twisted, shielded pair wires. For customer attachment to mating connector P/N 8978-200-0000. Specify - XXXX in 0.1 m increments (e.g. 9061-0250=25.0 m ). Mounting pad for magnet, 1 Polyurethane Jacketed 7295-002, Accelerometer EP Housing Assembled Disassembled 7084-002 Flange Mount 99506-040, Mounting Pad, 1 99506-XXX Magnetic Mount 125 mm [5.0 in.] Weight: 0.7 kg [1.5lb] Weight: 0.5 kg [1 lb] Weight: 0.5 kg [1 lb] Weight: 0. 25 kg [0.5 lb] 2.28
Seismic Sensor Accessories SA, SV & ST 6000 Series Mating Connector/Cable Assemblies 8978-111-XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. 9334-111-XXXX-YYYY, Splashproof Cable Assembly w/ Armor Two (2) pin socket connector with integral, molded splash proof boot with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters. 8978-211-XXXX, Cable Assembly Two (2) pin socket connector with cable strain relief with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. Note: All 8978 connector/cable assemblies rated to 121 o C (250 o F) max. 9334-211-XXXX-YYYY, Cable Assembly, w/ Armor Two (2) pin socket connector with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters. 8978-200-0000, Connector Assembly Two (2) pin socket connector with cable strain relief, no cable. 3719-002, Mounting Stud 1/4-28 UNF to 1/4-28 UNF 3719-007, Mounting Stud 1/4-28 UNF to M6 X 1 3719-008, Mounting Stud 1/4-28 UNF to 3/8-24 UNF 3719-009, Mounting Stud 1/4-28 UNF to 1/4-18 NPT 9338-101, Sensor Spot Facing Kit Tool with a 3/16 pilot and drill bits and taps NOTE: All 8978 connector/cable assemblies rated to 121 C (250 F) max. 2.29
Seismic Sensor Accessories Probe Driver / Signal Conditioner / Transmitter Housings Features Provides physical protection NEMA 4/IP 65 Models for 2, 4 or 8 units Conduit terminations (when used) Hazard rated - 2 or 4 unit models Metrix Product Applications 1 Signal Conditioner Models 5534 & 5544 (Pg 2.12) 5535 & 5545 (Pg 2.06) Signal Condtioner Models 5510, 5516 (Pg 1.26) Proximity Probe Transmitter Models TXA & TXR (Pg 1.20) Probe Driver Model 5533 (Pg 1.18) 1 Products (ordered separately) to be DIN-rail mount to fi t enclosures. Weatherproof Versions Polyester coated steel housing with gasketed cover and stainless steel clips comes with conduit hubs and DINrail/s for mounting Metrix Instrument Co. products. NEMA 4/IP 65 Model 7876-001 shown - 2 units (max. capacity) 1 NPT EXIT (Model 7876) (Model 8172) 1 1/4 NPT (Model 8173) 3/4 NPT ENTRY (QTY 2 for 7876) (QTY 4 for 8172) (QTY 8 for 8173) 7876-001 with 1 unit Explosionproof Versions Cast aluminum housing with threaded cover & DIN-rail/s for mounting Metrix Instrument Co. products. NEC & CSA rated for Class I, (C,D) & Class II (E, F & G), Div.1 areas. ATEX rating EEx d IIC T5 or T6. Explosionproof Model 7595-001 shown - 2 units (max. capacity) 3/4 NPT 1/2 NPT ATEX How To Select... Model Environmental Rating Units Empty Weight Dimensions in mm (inches) 7876-001 Weatherproof 2 2 kg (4.4 lb) 200 x 250 x 100 (8 x10 x 4) 8172-001 Weatherproof 4 3 kg (6.6 lb) 250 x 300 x 125 (10 x 12 x 5) 8173-001 Weatherproof 8 4 kg (8.8 lb) 300 x 350 x 150 (12 x 14 x 6) 7595-001 Explosionproof 2 5 kg (11 lb) 178 x 178 x 163 (7 x 7 x 6.4) 8156-001 Explosionproof 4 11 kg (24 lb) 280 x 229 x 190 (11 x 9 x 7.5) Note: Customized and pre-wired housings available upon request. Please contact us for more information. 2.30
Velocity Sensor Accessories 5485C PART NO. NAME USED WITH DESCRIPTION 8531-001 Mounting 5485C 1/4-28 mount adaptor - loose with screws and stud. (0.2 Kg) 8531-002 Mounting Same as -001 except shipped attached to sensor. 8531-XXX, Mounting 2.31
Transmitter Accessories ST5484E, ST5491E 8200-001, Conduit Elbow & Reducer Provides access and physical protection for fi eld wiring. Suitable for Class I, Div. 1 (Grps C & D) and Class II, Div. 1 (Grps E, F & G), hazardous areas. 1 to ¾ NPT reducer for customer connection included. NEMA 4 IP 65. Material: copper free aluminum. 8200-002, Conduit Elbow & Reducer Conduit Elbow with terminal block 8200-005, Conduit Elbow & Reducer Provides access and physical protection for fi eld wiring. 8200-006, Conduit Elbow & Reducer Conduit Elbow with terminal block 8201-001, Conduit Union Fits between transmitter and 8200-001 conduit elbow to facilitate installation and wiring where there is not enough room to rotate the elbow. Suitable for Class I, Div. 1 (Grps A, B, C & D) and Class II, Div. 1 (Grps E, F & G), hazardous areas. Material: zinc plated steel. 7084-001, Flange Mount Provides a means to surface mount transmitters rather than NPT stud (½ : NPT center hole). Three equally spaced 6.6 mm (0.26 ) diameter mounting holes on 38 mm (1.50 ) diameter circle. 7084-002, Flange Mount Same as 7084-001, except center hole is ¼ NPT. Material: stainless steel 8253-002, Bushing Bushing for ½ NPT mount when screwed onto standard ¼ NPT base. Material: stainless steel. 8169-75-002-XXX, Two-wire, Cable Assembly 2 conductor (20 AWG) twisted, shielded PVC jacketed cable, with plated steel grip for cable strain relief, male ¾ NPT end. Specify -XXX for length in feet. Example: 8169-75-002-010 =10 ft (3.1M). Material: zinc plated steel. 8978-111-XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. 9334-111-XXXX-YYYY, Splashproof Cable Assembly w/ Armor Two (2) pin socket connector with integral, molded splash proof boot with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters. 8978-211-XXXX, Cable Assembly Two (2) pin socket connector with cable strain relief with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. Note: All 8978 connector/cable assemblies rated to 121 o C (250 o F) max. 9334-211-XXXX-YYYY, Cable Assembly, w/ Armor Two (2) pin socket connector with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters. 8978-200-0000, Connector Assembly Two (2) pin socket connector with cable strain relief, no cable. 93818-004, Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Diameter range:.156 to.25. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures. 93818-018, Armored Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Armor diameter range:.40 to.50. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures. 2.32
Transmitter Accessories ST6900 Series & IT6810 8978-111-XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. 9334-111-XXXX-YYYY, Splashproof Cable Assembly w/ss armor Two (2) pin socket connector with integral, molded splash proof boot with 7.1 mm (0.28 ) diameter, ss armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters. 8978-211-XXXX, Cable Assembly Two (2) pin socket connector with cable strain relief with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. Note: All 8978 connector/cable assemblies rated to 121 o C (250 o F) max. 9334-211-XXXX-YYYY, Cable Assembly, w/ Armor Two (2) pin socket connector with 7.1 mm (0.28 ) diameter, ss armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters. 8978-200-0000, Connector Assembly Two (2) pin socket connector with cable strain relief, no cable. 3719-002, Mounting Stud 1/4-28 UNF to 1/4-28 UNF 3719-007, Mounting Stud 1/4-28 UNF to M6 X 1 8841-044, Mounting Stud 1/4-28 UNF to 1/4-18 NPT 3719-008, Mounting Stud 1/4-28 UNF to 3/8-24 UNF 3719-009, Mounting Stud 1/4-28 UNF to 1/4-18 NPT Note: These mounting studs are also used for 2-pin MS connector style accelerometers 2.33
Transmitter Accessories PMC/BETA 162VTS 7084-001, Flange Mount Provides a means to surface mount transmitters rather than NPT stud (½ : NPT center hole). Three equally spaced 6.6 mm (0.26 ) diameter mounting holes on 38 mm (1.50 ) diameter circle. 7084-002, Flange Mount Same as 7084-001, except center hole is ¼ NPT. Material: SS 8253-002, Bushing Bushing for ½ NPT mount when screwed onto standard ¼ NPT base. Material: stainless steel. 8169-75-002-XXX, Two-wire, Cable Assembly 2 conductor (20 AWG) twisted, shielded PVC jacketed cable, with plated steel grip for cable strain relief, male ¾ NPT end. Specify -XXX for length in feet. Example: 8169-75-002-010 =10 ft (3.1M). Material: zinc plated steel. 91174-036, Conduit Elbow & Reducer Provides access and physical protection for fi eld wiring. Suitable for Class I, Div. 1 (Grps C & D) and Class II, Div. 1 (Grps E, F & G), hazardous areas. 1/2 to 1/2 NPT reducer for customer connection included. NEMA 4 IP 65. Material: copper free aluminum. 8200-004, Conduit Elbow Conduit Elbow with terminal block, 1/2 to 1/2 NPT female. Supporting Accessories for MS Style Connector 93818-004, Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Diameter range:.156 to.25. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures. 93818-018, Armored Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Armor diameter range:.40 to.50. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures. 8841-058, 1 to 1/2 Reducer Retrofit adapter 2.34