GRUNDFOS DATA BOOKLET CRNE32-5-2 AN-F-G-E-HQQE 3x4 6 HZ Grundfos Pump 9612277 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crne32/9612277/crne-32-5-2-an-f-g-e-hqqe.html info@lenntech.com tel. +31-15-261.9. fax. +31-15-261.62.89 BE > THINK > INNOVATE
Position Qty. Description 1 CRNE 32-5-2 AN-F-G-E-HQQE Product No.: 9612277 Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation. The pump has the following characteristics: - Impellers, intermediate chambers and outer sleeve are made of - Pump head cover and base are made of - The shaft seal has assembly length according to EN 12756. - Power transmission is via cast iron split coupling. flanges/couplings. The pump is fitted with an IEC-flanged three-phase MGE motor with frequency converter and PI-controller integrated in the motor terminal box. No additional motor protection is required as both motor and electronics are protected by integrated overload and temperature protection. The pump is equipped with a pressure transmitter registering pump discharge pressure and enabling controlled pump operation based on constant pressure. A control panel enables setting of required setpoint as well as setting of pump to MIN or MAX operation or to STOP. The control panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos R Remote Control enabling further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for the connection of: - Pump start/stop (potential-free contact), - external remote setpoint setting via analog signal, - 5 V, - V, (4) - ma, - 5 V voltage supply for setpoint potentiometer, Imax = 5 ma, - pressure sensor factory-fitted. - input for forced control to MIN, MAX, External fault or Flowswitch (potential-free contact), - potential-free fault signal relay with changeover contact, - RS485 GENIbus. Controls: Frequency converter: Built-in
Position Qty. Description Pressure sensor: Y Liquid: Pumped liquid: Water Liquid temperature range: -4.. 1 C Liquid temperature during operation: C Density: 998.2 kg/m³ Technical: Speed for pump data: Rated flow: Rated head: Pump orientation: Shaft seal arrangement: Code for shaft seal: Approvals on nameplate: Curve tolerance: Materials: Base: Impeller: Bearing: Support bearing: 3528 rpm 36 m³/h 99.1 m Vertical Single HQQE CE, EAC,ACS ISO996:12 3B Stainless steel EN 1.448 AISI 316 Stainless steel EN 1.441 AISI 316 SIC Graflon Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 16 bar Max pressure at stated temp: 16 bar / 1 C 16 bar / -4 C Type of connection: DIN Size of inlet connection: DN 65 Size of outlet connection: DN 65 Pressure rating for pipe connection: PN 4 Flange size for motor: FF Electrical data: Motor standard: IEC Motor type: 16MD IE Efficiency class: IE3 Rated power - P2: 15 kw Power (P2) required by pump: 15 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-48 V Rated current:,-26, A Cos phi - power factor:,91-,86 Rated speed: 48-354 rpm Efficiency: IE3 91,9% Motor efficiency at full load: 91.9 % Number of poles: 2 Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 5 kg Gross weight: 256 kg Shipping volume:.82 m³ Danish VVS No.: 385956552
9612277 CRNE 32-5-2 5 Hz H [m] CRNE 32-5-2, 3*44 V eta [%] 14 1 % 1 1 9 % 9 8 8 % 9 8 7 6 7 % 7 6 5 6 % 5 4 5 % 4 % 4 25 % 5 15 25 35 4 45 P [kw] Q [m³/h] NPSH [m] P1 (motor+freq.converter) 15 P2 15 5 5
x14 474 17 4 X G 1/2 X18 8 G 1/2 G 1/2 8 314 226 3 24 298 35 Description General information: Value H [m] CRNE 32-5-2, 3*44 V eta [%] Product name: CRNE 32-5-2 AN-F-G-E-HQQE Product No: 9612277 EAN number: 57396687513 Technical: Speed for pump data: 3528 rpm Rated flow: 36 m³/h Rated head: 99.1 m Stages: 5 Impellers: 5 Number of reduced-diameter impellers: 2 Low NPSH: N Pump orientation: Vertical Shaft seal arrangement: Single Code for shaft seal: HQQE Approvals on nameplate: CE, EAC,ACS Curve tolerance: ISO996:12 3B Pump version: AN Model: B Materials: Base: Impeller: Stainless steel EN 1.448 AISI 316 Stainless steel EN 1.441 AISI 316 G E SIC Graflon Material code: Code for rubber: Bearing: Support bearing: Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 16 bar Max pressure at stated temp: 16 bar / 1 C 16 bar / -4 C Type of connection: DIN Connect code: F Size of inlet connection: DN 65 Size of outlet connection: DN 65 Pressure rating for pipe connection: PN 4 Flange size for motor: FF Liquid: Pumped liquid: Water Liquid temperature range: -4.. 1 C Liquid temperature during operation: C Density: 998.2 kg/m³ Electrical data: Motor standard: IEC Motor type: 16MD IE Efficiency class: IE3 Rated power - P2: 15 kw Power (P2) required by pump: 15 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-48 V Rated current:,-26, A Cos phi - power factor:,91-,86 Rated speed: 48-354 rpm Efficiency: IE3 91,9% Motor efficiency at full load: 91.9 % Number of poles: 2 Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Motor protec: YES 14 1 1 1 9 8 7 6 5 4 % 9 % 8 % 7 % 6 % 5 % 4 % 25 % 5 15 25 35 4 Q [m³/h] P NPSH [kw] [m] P1 (motor+freq.converter) 15 5 471 895 5 35 8 G 1/2 G 1/2 4 X G 1/2 Group 2 NC C2 NO NC C1 NO L1 L2 L3 314 17 226 3 : Pt B 19: Pt B 18: Pt A 17: Pt A 16: GND (frame) 15: 24V 14: Sensor input2 13: GND 12: Analog output 11: Digital input 4 : Digital input 3 1: Digital input 9: GND (frame) 8: +24V 7: Sensor input B: RS-485B Y: Screen A: RS-485A 6: GND (frame) 5: +V 4: Setpoint input 3: GND (frame) 2: Start/stop Group 3 Group 1 8 X18 74 24 298 145 185 P2 4 x 14 9 8 7 6 5 4 15 5
Description Value Motor No: 85925 Controls: Function Module: ADVANCED I/O Frequency converter: Built-in Pressure sensor: Y Others: Minimum efficiency index, MEI :.7 Net weight: 5 kg Gross weight: 256 kg Shipping volume:.82 m³ Danish VVS No.: 385956552
9612277 CRNE 32-5-2 5 Hz cos phi eta CRNE32-5-2 + 16MD 15 kw 3*44 V, 5 Hz I [A] cos phi eta.8 4.6 I.4.2. 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 n [rpm] P2 [kw] P1 [kw] n P1 (motor+freq.converter) n = %
9612277 CRNE 32-5-2 5 Hz 35 G 1/2 G 1/2 4 X G 1/2 17 226 3 8 X18 74 24 298 4 x 14 5 895 471 145 185 8 314 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details.
9612277 CRNE 32-5-2 5 Hz Group 2 NC C2 NO NC C1 NO L1 L2 L3 Group 3 : Pt B 19: Pt B 18: Pt A 17: Pt A 16: GND (frame) 15: 24V 14: Sensor input2 13: GND 12: Analog output 11: Digital input 4 : Digital input 3 1: Digital input 9: GND (frame) 8: +24V 7: Sensor input B: RS-485B Y: Screen A: RS-485A Group 1 6: GND (frame) 5: +V 4: Setpoint input 3: GND (frame) 2: Start/stop Note! All units are in [mm] unless others are stated.
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com www.lenntech.com tel. +31-15-261.9. fax. +31-15-261.62.89