Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride, e.g. brckish wter, sewter nd sline solutions bllst tnks on ships offshore pplictions Brief description The pressure trnsmitter fetures n impervious nd hysteresis-free cermic mesuring cell, titnium cse, nd titnium process connection. Titnium ws selected s the mteril due its extremely high corrosion resistnce, in prticulr to orgnic cids nd solutions contining chloride. The device cn record reltive pressures in mesuring rnges of.6 br up to 00 br. 4 ma to 0 ma (two-wire) nd DC 0 V to 0 V (three-wire) re vilble s stndrd signls. Type 400 with ttched cble Customer benefits process-relible The full finl inspection in the fully utomted mesuring nd clibrtion fcility gurntees tht ech pressure trnsmitter is of high qulity. The durbility of the used mterils results in high plnt vilbility. In combintion with the oil-free cermic mesuring cell which prevents filling oil leks in the event of burst, this gurntees high degree of process relibility for criticl processes such s reverse osmosis. economic A proven design ensures efficient production, which in turn leds to short delivery times. The resistnt mterils reduce clening nd repir processes, thereby reducing plnt downtimes s well s the resulting costs of these. The compct nd light design opens up mny fields of ppliction for users nd mkes purchse decisions esier when replcements re needed. Specil fetures mesuring cell mde of luminum oxide cermic cse nd process connection mde of titnium long-term stbility < 0. % pprox. 40 % weight reduction when compred to similr stinless steel versions potting s protection ginst vibrtions, condenstion, nd moisture mde in Germny Approvls/pprovl mrks
Pge /8 Technicl dt Generl Informtion Reference conditions DIN 6086 nd DIN EN 60770 Sensor Mesuring principle Thick film on cermic bodies (piezo-resistive) Admissible lod chnges > 0 million, 0 % to 00 % mesuring rnge Mounting position Any Clibrtion position Device upright, process connection t the bottom Mesuring rnge nd ccurcy Mesuring rnge Linerity Accurcy t Long-term 0 C d -0 C to +00 C e stbility b Output Overlod cpcity c Burst pressure br % MSP f % MSP % MSP % MSP br br per yer 0 br to.6 br reltive pressure 0. 0.5.6 0. 6 0 br to.5 br reltive pressure 0. 0.5.6 6 0 br to 4 br reltive pressure 0. 0.5.6 5 0 br to 6 br reltive pressure 0.5 0.5.4 5 0 br to 0 br reltive pressure 0.5 0.5.4 0 8 0 br to 6 br reltive pressure 0.5 0.5.4 50 75 0 br to 5 br reltive pressure 0.5 0.5.4 50 75 0 br to 40 br reltive pressure 0.5 0.5.4 0 00 0 br to 60 br reltive pressure 0.5 0.5.4 0 00 0 br to 00 br reltive pressure 0.5 0.5.4 80 50 - br to +0.6 br reltive pressure 0. 0.6.6 6 - br to +.5 br reltive pressure 0. 0.6.6 6 - br to + br reltive pressure 0. 0.6.6 5 - br to +5 br reltive pressure 0.5 0.5.4 5 - br to +9 br reltive pressure 0.5 0.5.4 0 8 - br to +5 br reltive pressure 0.5 0.5.4 50 75 - br to +4 br reltive pressure 0.5 0.5.4 50 75 Linerity ccording to limit point setting b Reference conditions EN 698- c All pressure trnsmitters re vcuum-proof. d Includes: linerity, hysteresis, repetbility, devition of mesuring rnge initil vlue nd mesuring rnge end vlue e Includes: linerity, hysteresis, repetbility, devition of mesuring rnge initil vlue nd mesuring rnge end vlue, therml effect on mesuring rnge strt nd mesuring spn f MSP = mesuring spn Anlog output Current 4 to 0 ma, two-wire (output 405) Voltge DC 0 to 0 V, three-wire (output 45) Jump response time t 90 ms Burden Current RL (U B -8 V) 0.0 A (Ω) for 4 to 0 ma, two-wire (output 405) Voltge RL 0 kω for DC 0 to 0 V, three-wire (output 45)
Pge /8 Mechnicl fetures Mteril Process connection Titnium grde.705 (Ti) Process sel 600 EPDM Process sel 60 FPM Sensor Cermic Al O 96 % Cse Titnium grde.705 (Ti) Attched cble Technomelt PA 678, PVC (electricl connection ) Round plug M PBT-GF0 (electricl connection 6) Cble socket PBT-GF0, PA, EPDM (electricl connection 6) Weight 44 g with G /4 (process connection 5) nd round plug M (electricl connection 6) Ensure the medium durbility of the sel mteril! Environmentl influences Medium temperture -0 C to +5 C Ambient temperture -0 C to +85 C Storge temperture -40 C to +5 C -0 C to +00 C for version with ttched cble Admissible humidity Opertion 00 % rel. humidity including condenstion on the device outer cse Storge 90 % rel. humidity without condenstion Admissible mechnicl lod Vibrtion resistnce 0 g, 5 to,000 Hz, ccording to IEC 60068--6 Shock resistnce 00 g for ms, ccording to IEC 60068--7 Electromgnetic comptibility Interference emission Clss B, ccording to EN 66-- Interference immunity Industril requirement, ccording to EN 66-- Protection type According to EN 6059 for electricl connection Attched cble b IP67 Round plug M b IP67 Cble socket b, c IP65 The product is suitble for industril use s well s for households nd smll businesses. b The protection type is only chieved with suitble mounted counter piece. c Connecting cble dimeter, minimum 6 mm, mximum 8 mm
Pge 4/8 Auxiliry power Voltge supply U B 4 ma to 0 ma, two-wire (output 405) DC 0 V to 0 V, rted voltge supply DC 4 V DC 0 V to 0 V, three-wire (output 45) DC.5 V to 0 V, rted voltge supply DC 4 V Current consumption 4 ma to 0 ma, two-wire (output 405) 5 ma DC 0 V to 0 V, three-wire (output 45) ma Reverse voltge protection yes Electricl circuit SELV Requirements The device must be equipped with n electricl circuit tht meets the requirements of EN 600- with regrdto "Limited-energy circuits". Residul ripple: the voltge peks must not exceed or fll below the specified voltge supply vlues. Approvls/pprovl mrks Approvl mrk Test fcility Certificte/certifiction number Inspection bsis Vlid for DNV GL DNV GL TAA0000 Clss Guideline DNVGL-CG-009 Only in connection with bsic typ extension 06; observe order detils
Pge 5/8 Dimensions Electricl connection Attched cble 6 Round plug M 6 Cble socket Process connection 5 G/4 A Profile sel G /4 5 G/ A Profile sel G /4 A Profile sel G /
Pge 6/8 Connection digrm The connection digrm in the dt sheet provides preliminry informtion bout the connection options. For the electricl connection, only use the instlltion instructions or the operting mnul. The knowledge nd the correct technicl complince with the sfety informtion nd wrnings contined in these documents re mndtory for mounting, electricl connection, nd strtup s well s for sfety during opertion. Connection Terminl ssignment (figure: connection to the pressure trnsmitter) 4 4 ma to 0 ma, two-wire (output 405) Voltge supply DC 8 V to 0 V DC 0 V to 0 V, three-wire (output 45) Voltge supply DC.5 V to 0 V U B /S+ 0V/S- U B 0V/S- S+ Functionl bonding conductor FB - 4 Attched cble Round plug M Cble socket WH BN WH BN YE The pressure trnsmitter hs to be connected to the potentil equliztion system of the plnt through the electricl connection or process connection. Color coding: connecting cble round plug M BN Brown WH White BU Blue 4 BK Blck The color coding is only vlid for A-coded stndrd cbles!
Pge 7/8 Order detils b () Bsic type 400 JUMO MIDAS C8 SW OEM pressure trnsmitter sewter () Bsic type extension 000 None 06 DNV GL pprovl 999 Specil version () Input 455 0 br to.6 br reltive pressure 456 0 br to.5 br reltive pressure 457 0 br to 4 br reltive pressure 458 0 br to 6 br reltive pressure 459 0 br to 0 br reltive pressure 460 0 br to 6 br reltive pressure 46 0 br to 5 br reltive pressure 46 0 br to 40 br reltive pressure 46 0 br to 60 br reltive pressure 464 0 br to 00 br reltive pressure 479 - br to +0.6 br reltive pressure 480 - br to +.5 br reltive pressure 48 - br to + br reltive pressure 48 - br to +5 br reltive pressure 48 - br to +9 br reltive pressure 484 - br to +5 br reltive pressure 485 - br to +4 br reltive pressure 999 Specil mesuring rnge for reltive pressure (4) Output 405 4 ma to 0 ma, two-wire 45 DC 0 V to 0 V, three-wire (5) Process connection 5 G /4 DIN 85-5 G / DIN 85- (6) Process connection mteril 60 Titnium (7) Mteril sel 600 EPDM 60 FPM (8) Electricl connection Attched cble, m (other lengths upon request) b 6 Round plug M 6 Cble socket DIN EN 750-80, Form A (9) Extr codes 60 Enlrged pressure chnnel With DNV GL pprovl, specil mesuring rnges (input) re not llowed to exceed the 00 br limit. Without DNV GL pprovl () () () (4) (5) (6) (7) (8) (9) Order code / - - - - - - / Order exmple 400 / 000-460 - 405-5 - 60-60 - / 60
Pge 8/8 Accessories The ccessories re not checked ccording to DNV GL requirements. Article Prt no. M socket, 4 pole, with control cble 5 m 0054