Electrical Work for Rennovation of LT-25 & 26 to convert it in LABs for Name of work :- Chemical Department MNIT Jaipur. G SHEDULE Based on BSR 2013 S.No Qty Items Unit Rate Amount S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. (Make: AKG, BEC, 1 Precision, Polypack, Polycab) 1.1 100.0 20 mm, Gr.I R. mtr. 32.00 3200.00 1.2 450.0 25 mm R. mtr. 42.00 18900.00 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kv grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,modular plate with grid plate, screws, making connections, testing etc. as required. (Make BSR Group-1) 2 2.1 40.0 Medium point (up to 6 mtr.) P. point 377.00 15080.00 2.2 20.0 Long point (up to 10 mtr..) P. point 508.00 10160.00 Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kv grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. (Make BSR Group-1) 3 3.1 5.0 Medium point (up to 6 mtr.) P. point 340.00 1700.00 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (RR Kabel, 4 National, Finolex) 4.1 800.0 2 x 2.5 sq. mm. + 1x1.5sqmm Mtr. 53.00 42400.00 4.2 100.0 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. Mtr. 77.00 7700.00 4.3 200.0 4 x 4.0 sq.mm Mtr. 113.00 22600.00 Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or 5 recessed conduit/casing capping. Unarmoured Telephone cable in existing surface or recessed conduit/casing capping. Delton, Finolex, National, RR Kabel, 5.1 Polycab, Havell's 5.1.1 150.0 3 pair Mtr. 16.00 2400.00
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. (Make: Schneider (neo break), Siemens, GE ( G2000), ABB, Legrand (Ekinoxe / Lexic)) 6 6.1 Single pole MCB 6.1.1 132.0 6 A to 32 A rating Each 151.00 19932.00 6.2 Triple pole MCB 6.1.2 16.0 40 A 63 A rating Each 1034.00 16544.00 P&F 240/415 V isolator conforming to IS:13947- III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. (Make: Schneider (neo break), Siemens, GE ( G2000), ABB, Legrand 7 (Ekinoxe / Lexic)) 7.2 Four pole Isolator 7.2.2 12.0 63 A rating Each 631.00 7572.00 7.2.3 3.0 100 A rating Each 746.00 2238.00 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link, neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs, testing etc. as required. (Make: Schneider (neo break), Siemens, GE ( G2000), ABB, Legrand (Ekinoxe / Lexic)) 8 8.1 Double door (Three phase) 8.1.1 3.0 12 Way Each 4575.00 13725.00 P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing, phophatised,powder painted complete with insulated suitable rating copper bus bar, neutral link, earth link and din bar, masking sheet,conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs, testing etc. as required. (Make: Schneider (neo break), Siemens, GE ( G2000), 9 ABB, Legrand (Ekinoxe / Lexic)) 9.1 1.0 12 Way, Gr.I Each 8072.00 8072.00 P&F metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without MCB) including making connections, testing etc.as required (Make: Schneider (neo break), Siemens, GE ( G2000), ABB, Legrand 10 (Ekinoxe / Lexic)) 10.1 Single / Double Pole (Three pin) 10.1.1 24.0 32 A Each 850.00 20400.00 10.2 Three / Four pole (Five pin) 10.2.1 12.0 30A-32A Each 1782.00 21384.00 P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required (Make: Legrand ( Myrius ), ABB ( Classic Luminia ), Anchor ( Wood ), Schneider ( Opale ), 11 Philips, Havell's ( Crabtree )) 11.1 45.0 6 A one way switch Each 92.00 4140.00 11.2 200.0 16 A one way switch Each 138.00 27600.00 11.3 45.0 6 A 3 pin shuttered socket Each 120.00 5400.00 11.4 200.0 16 A 6 pin shuttered socket Each 138.00 27600.00 11.5 12.0 RJ-11 telephone jack single two line Each 86.00 1032.00 11.6 24.0 RJ-45 computer jack with shutter Each 149.00 3576.00 11.7 65.0 5 step fan regulator 2 Module Each 460.00 29900.00
11.8 10.0 Blanking plate Each 19.00 190.00 P & F following size mounting grid plates with cover plates. (Make: Legrand ( Myrius ), ABB ( Classic Luminia ), Anchor ( Wood ), Schneider ( Opale ), Philips, Havell's ( 12 Crabtree )) 12.1 36.0 3 Module Each 74.00 2664.00 12.2 100.0 5/6 Module Each 109.00 10900.00 12.3 15.0 8 Module Each 161.00 2415.00 P & F following size hot dip galvanized M.S. box with earthing terminal in recess/ surface suitable for modular accessories as required. (Make: Legrand ( Myrius ), ABB ( Classic Luminia ), Anchor ( Wood ), Schneider ( Opale ), Philips, Havell's ( Crabtree )) 13 13.1 36.0 3 Module Each 47.00 1692.00 13.2 100.0 5/6 Module Each 82.00 8200.00 13.3 15.0 8 Module Each 95.00 1425.00 SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate M.S. base channel,hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) 14 10.0 Sqm 2752.00 27520.00 Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with 15 heat shrinkable PVC sleeves. 15.1 5.0 Electrolytic grade Aluminium bus bar Kg 420.00 2100.00 16 SF of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Make:- Schneider, L&T, HPL, Secure, AE, Neptune, Raychem RPG 16.1 1.0 Digital type, Gr.I Each 1100.00 1100.00 SF of CT operated direct reading type Ampere meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.make:- Schneider, L&T, HPL, Secure, AE, Neptune, 17 Raychem RPG 17.1 Digital type, Gr.I 17.1.1 1.0 Below 500 A, Gr.I Each 1100.00 1100.00 SF of Current Transformer, with all necessary support in existing panel including connection etc. as required. Make :-C&S, L&T, Nippen, Schneider, Siemens, AE, Kappa, Milborn 18 18.1 3.0 from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy, Gr.I Each 323.00 969.00 19 1.0 SF of selector switch of 10 A for voltmeter (4 position ) including making connection etc. as required.make :-GE, Siemens, C&S, HPL, L&T ( salzer ), ABB, Schneider Each 228.00 228.00
20 1.0 SF of CT linked selector switch of 10 A for Ampere meter (4 position ) including making connection etc. as required.gr.1 Each 286.00 286.00 SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required. Make :-Siemens, C&S, GE, ESBEE ( L&T ), BCH, ABB, Schneider, Vaishno, Rass 21 control, Kaycee, HPL,Milborn 21.1 2.0 Red/yellow/Green colour, Gr.I Each 150.00 300.00 21.2 1.0 Blue colour, Gr.I Each 250.00 250.00 SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR, shunt trip,earth fault trip, push ( test ) to trip, including making connections with lugs & spreaders, etc. as required. Make:- Schneider (neo break), C & S, ABB (S270) 22 22.1 With Thermal Magnetic release 22.1.1 4.0 up to 100 Amp, 25 ka, fixed O/L & S/C setting Each 4302.00 17208.00 22.1.2 2.0 up to 125 Amp, 25 ka, adjustable O/L & fixed S/C setting, Ics = 100 % Icu Each 6150.00 12300.00 22.1.3 1.0 250 Amp, 35 ka, adjustable O/L & fixed S/C setting, Ics = 100 % Icu, Gr.I Each 18989.00 18989.00 23 Supply and fixing of following accessories for MCCB 23.1 1.0 Extended Rotary Handle Each 2041.00 2041.00 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.make 24 :-Gloster,CCI, Finolex 24.1 35.0 Sq.mm 24.1.1 150.0 3.5 core, Mtr. 269.64 40446.00 24.2 50.0 Sq.mm 24.2.1 50.0 3.5 core Mtr. 319.93 15996.50 24.3 70.0 Sq,mm 24.3.1 170.0 3.5 core Mtr. 388.00 65960.00 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Make Gripwel, Comet, Metalcraft, Cabend, Trinity 25 Touch, HMI 25.1 6.0 3.5 x 35.0 sq.mm Set 119.00 714.00 25.2 2.0 3 x 50.0 sq.mm Set 123.00 246.00 25.3 2.0 3.5 x 70.0 sq.mm Set 186.00 372.00
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of 26 8.0 size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. Set 4250.00 34000.00 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as 27 required. 27.1 220.0 8 SWG G.I. ( Hot Dipped ) Wire Mtr. 9.00 1980.00 27.2 245.0 25mm x 6mm G.I. ( Hot Dipped ) Strip Mtr. 110.00 26950.00 28 S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required 28.1 15.0 32mm dia Mtr. 234.00 3510.00 P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. Make :- Almonard, CG, Khaitan, Bajaj, Usha, 29 Orient, Ortem, Havell's,Polar 29.1 65.0 1200 mm Sweep 5 Star rated, Gr.I Each 1896.00 123240.00 P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,is:2312 marked in existing opening including making connections testing etc. as required. Make:- Alstom, CG, 30 Almonard, Havell's, Usha, EPC, Orient 30.1 14.0 450 mm sweep(900/1400 RPM) Each 5349.00 74886.00 P & F extra down rod of 15 mm dia. ERW (Electrical resistance welded ) of 1.6mm 31 40.0 nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. Mtr. 89.00 3560.00 P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. Power Consumption of 7W/ 10W / 15W / 18W with ~ 500 / 750 / 1100 / 1250 lumens, System Lumen efficacy of 70 lm / watt output suitable to replace 1x18W / 2x18W / 2x 26W CFL Downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintaned. CCT 3000 K, 4000 K & 6000 K. Fixture shall be CE compliance. Make:- Philips, Bajaj 32 32.1 Surface Mounting 32.2 15.0 LED Downlight 18/20W Each 1000.00 15000.00 P & F energy efficient direct fit (Retrofit) LED tube system (with integral driver), on existing fixture. Power Consumption of 18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000 K, 4000 K & 6000 K. Make:- Philips, 33 Bajaj 33.1 10.0 4' LED Tube shape fixture 18W Each 700.00 7000.00
P & F of IP20 LED ceiling / recessed / suspended mounting light fixture made from CRCA sheet steel housing, high purity / transmisivity diffuser for uniform light distribution. High efficiency driver electronics having efficiency > 85% and in compliance to IEC standards (Integral with light fixture). Power Consumption of 40W / 50W / 60W ~ 3000/3300/4200 lumens, System lumen efficacy of 70-80 lm/watt output suitable for 2x36WFTL / 2x36W CFL / 3x36W CFL light fixtures, life time of 50,000 burning hours with 70% initial lumens maintained. CCT 3000 K, 4000 K & 6000 K. Fixtures shall be CE 34 compliance.make:- Philips, Bajaj 34.1 Recessed Mounting 35.1.1 30.0 36W LED light fixture 2'x2' with acrylic / prismatic front cover. Each 3125.00 93750.00 Supply, Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. Amp, Avaya, Molex, Penduit, Dax 36 250.0 Mtr. Grand Total 36.00 9000.00 961742.50 Rs. Percentage "Above" or "Below" or "At par" Rate Quoted by Price Sr.No. "Above" Descripti or Total on of Estimated cost of work (in Rupees) % in "Below" In Words Cost (in Item Figures or "At Rupees) Par" 1 2 3 4 5 6 7 1 961742.00 - TOTAL COST OF 9,61,742.00 #NAME? 0.00 Grand Total (in words) Executive Engineer MNIT Jaipur