Euromas-Polyester 8 Euromas-Polyester, an enclosure available in sizes made of 0% glassbead-reinforced polyester, has been designed to satisfy the highest standards. It makes it possible for the user to employ a plastic enclosure in situations where high robustness and chemical resistance are required. Used primarily as a terminal and distribution enclosure, its main applications are in the fields of electrical and mechanical engineering and shipbuilding, electroplating and petrochemical industry. A wide range of accessories is available for all applications (DIN rails, terminals, hinges, wall brackets, leadsealable capstan headed screws). When fitted with oil and petrol resistant seals (neoprene or polyurethanefoamed seal), ingress protection up to IP is guaranteed. A silicone seal is available as standard for use in temperature ranges of around 0. The captive screws are made of VA material and secured with screw locking devices. For technical reasons, all screws including for mounting plates are screwed into threaded inserts. All Euromas-Polyester enclosures are UL-listed.
Enclosure material: Duroplastic UP polyester, (-0% glassfibre content); for technical data see pages -. Colour: Grey, similar to RAL 7000. Scope of delivery: Upper and lower section; screws made of VA; earthing screws. Ingress protection: max. IP / DIN EN 09; increased protection up to IP x7 on request. Lid seal: Standard: Sponge cord (neoprene or polyurethane, foamed) resistant up to 90 C. Silicone (SIL) version: Silicone seal resistant up to 0 C. For technical data see page. Accessories (additional charge): M: Mounting plate, sheet steel, galvanised KP: Capstan-headed screw, sealable, screws per set IS: Allen screws E: Earthing bar, mounted with clamps WL: Set of wall brackets = pcs TS : Top hat rail DIN EN 07 TH TS : G-rail DIN EN 07 G TS : Top hat rail DIN EN 07 TH SchD: Set of hinges, diecast Notes: Cable glands, see page Terminal assignment, see page We will be happy to help you with your special enclosure processing requirements, for example with the fitting of cable glands All Euromas Polyester enclosures are UL-listed (UL file no. E 9 70) Standard enclosures External dimensions Silicone seal Model L W H Model P 0 00000 7.0 P 0 00000 80 7. P 0 SIL 0000 P 0000 0 7. P SIL 000 P 0000 0 7. P SIL 000 P 9 09000 90 7. P 9 SIL 0900 P 0000 0 7. P SIL 000 P 0000 9.0 P 0000 0 7 7. P SIL 000 P 0000 0 7 7. P SIL 000 P 0000 80 7 7. P SIL 000 P 7 07000 0 7 7. P 7 SIL 0700 P 9 09000 90 7 7. P 9 SIL 0900 P 0 00000 0 0 9.0 P 0 SIL 0000 P 0000 0 0 9.0 P SIL 000 P 0000 0 9.0 P SIL 000 P 0000 0 0 9.0 P SIL 000 P 0000 0 0 9.0 P SIL 000 P 0000 0 00 8.0 P SIL 000 P 7 07000 0.0 P 7 SIL 0700 P 8 08000 0.0 P 8 SIL 0800 P 9 09000 0 0 9.0 P 9 SIL 0900 P 0 00000 00 0.0 P 0 SIL 0000 P 0000 00 0.0 P SIL 000 P 0000 00 0.0 P SIL 000 P 0000 0 0 9.0 P SIL 000 P 0000 00 0.0 P SIL 000 All dimensions in mm. Please refer to technical data. 9
Euromas-Polyester P 0 /. / Enclosure P 0 00000 /. / Accessories (additional charge) KP: Capstan-headed screws, sealable 00790 IS: Allen screws 007900 /. Ø. 9 9 7. Ø 7. 8 Ø 8 /. M /. /. /. /. R Z-07 P 0 80/79. /. /0. P 0 00000 P 0 SIL 0000 (SIL = with silicone seal) 7/7. /0. 8/7. 80/79 8 0.. 8.. Ø 7. Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 00800 TS : G-rail DIN EN 07 G 0070 TS : Top hat rail DIN EN 07 TH 0070 7/7 8 M 9 8 M / Ø. 0/9 7/70 0. Z-07 0 Accessories described on pages -.
P 0000 P SIL 000 (SIL = with silicone seal) 0/09. 9/9 8/80. P Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 0000 7/7. /0. 8/7. 0/09 98 0.. 8.. Ø 7. M M 7/7 8 89 7. / Ø. 80/79 0/00 0. Z-07 P 0000 P SIL 000 (SIL = with silicone seal) 0/9. /. /0. P Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 0000 7/7. /0. 8/7. 0/9 8 0... 8. Ø 7. 7/7 8 M 9 7. 8. M / Ø. 0/9 /0 0. Z-07 Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data.
Euromas-Polyester P 9 90/89. 7/7. /0. P 9 09000 P 9 SIL 0900 (SIL = with silicone seal) 7/7. /0. 8/7. 90/89 78 8. 0... Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 0000 TS : G-rail DIN EN 07 G 000 TS : Top hat rail DIN EN 07 TH 00 M 7/7 9 / Ø. Ø 7. 0/9 8/80 0. Z-07 P 0/9. /. 0/00. P 0000 P SIL 000 (SIL = with silicone seal) 7/7. /0. 8/7. R8, 0/9 8 /. 0.. 8.. Accessories (additional charge) KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 000 TS : G-rail DIN EN 07 G 00 TS : Top hat rail DIN EN 07 TH 00 7/7 M 09 /0. / Ø. Ø 7. 00/99 /0 0. Z-077 Accessories described on pages -.
Enclosure P 0000 /. / P Accessories (additional charge) KP: Capstan-headed screws, sealable 00790 IS: Allen screws 007900 WL: Set of wall brackets = pcs 000 /. / / 9 9 8 /. /. 8 M / Ø. Ø 7. /. /. R 8 Z-078 P 0000 P SIL 000 (SIL = with silicone seal) 0/09. 9/9 8/80. P Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 0000 7/7. /0. 8/7. 0/09 98 0. 9. 0. 7. Ø 7. M 7/7 89 / Ø. 80/79 0/00 0. Z-079 Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data.
Euromas-Polyester P 0/9. /. /0. P 0000 P SIL 000 (SIL = with silicone seal) 7/7. /0. 8/7.8 0/9 8 0. 9. 0. 7. Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 00000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 0000 M 7/7 9 / Ø. Ø 7. 0/9 /0 0. Z-070 P 80/79. /. /0. P 0000 P SIL 000 (SIL = with silicone seal) 7/7. /0. 8/7. 80/79 8 0. 9. 0. 7. Accessories (additional charge) KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 00800 TS : G-rail DIN EN 07 G 0070 TS : Top hat rail DIN EN 07 TH 0070 7/7 9 M / Ø. Ø 7. 0/9 7/70 0. Z-07 Accessories described on pages -.
P 7 07000 P 7 SIL 0700 (SIL = with silicone seal) 0/9 /. 0/00. P 7 Accessories (additional charge) KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 000 TS : G-rail DIN EN 07 G 00 TS : Top hat rail DIN EN 07 TH 00 7/7. /0. 8/7. R8, /. 0/9 8 0. 0. 9. 7. 09 7/7 M /0. / Ø. Ø 8 00/99 /0 0. Z-07 P 9 09000 P 9 SIL 0900 (SIL = with silicone seal) 90/89. 7/7. /0. P 9 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 0079 IS: Allen screws 00790 WL: Set of wall brackets = pcs 000 TS : Top hat rail DIN EN 07 TH 0000 TS : G-rail DIN EN 07 G 000 TS : Top hat rail DIN EN 07 TH 00 7/7. /0. 8/7. 90/89 78 0. 0. 9. 7. 7/7 M 9 / Ø. Ø 7. 0/9 8/80 0. Z-07 Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data.
Euromas-Polyester P 0 0/9. /. /. P 0 00000 P 0 SIL 0000 (SIL = with silicone seal) 0/9. /. 8/8. M 0/9 0 Ø. 0 7 9 Ø 0 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00700 KP: Capstan-headed screws, sealable 00797 IS: Allen screws 007970 E: Earthing bar, mounted with clamps 00800 WL: Set of wall brackets = pcs 0000 TS : Top hat rail DIN EN 07 TH 0090 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 0/9 0 7 90/89 8/7. 0/9 8/7 R0. anti-turn locking device 79 Z-07 P 0/9 0/0 8/8 P 0000 P SIL 000 (SIL = with silicone seal) 0/9 0/0 /0 0/9 0 9 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 00799 IS: Allen screws 007990 E: Earthing bar, mounted with clamps 00700 WL: Set of wall brackets = pcs 0000 TS : Top hat rail DIN EN 07 TH 000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 M Ø. Ø 0. 0/9 8 9 / /0 80/79 /0 R8 80 Z-07 Accessories described on pages -.
P 0000 P SIL 000 (SIL = with silicone seal) / 08/07 8/8 P 0/9 0/0 /0 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 00799 IS: Allen screws 007990 E: Earthing bar, mounted with clamps 0000 WL: Set of wall brackets = pcs 0000 TS : Top hat rail DIN EN 07 TH 000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 / 0 9 M Ø. Ø 0. 0/9 8 9 / /0 8/8 / R8 anti-turn locking device 80 Z-077 P 0000 P SIL 000 (SIL = with silicone seal) 0/9. /. /. P Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00800 KP: Capstan-headed screws, sealable 00797 IS: Allen screws 007970 E: Earthing bar, mounted with clamps 00900 WL: Set of wall brackets = pcs 0000 TS : Top hat rail DIN EN 07 TH 000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 Ø. Ø 0/9. /. 8/8. 0/9 0 0 7 9 0 M 0/9 0 7 90/89 8/7 0/9 8/7 R0. 79 Z-078 Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data. 7
Euromas-Polyester P 0/9. /. /. P 0000 P SIL 000 (SIL = with silicone seal) 0/9. /. 8/8. 0/9 0 0 7 9 0 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00900 KP: Capstan-headed screws, sealable 00797 IS: Allen screws 007970 E: Earthing bar, mounted with clamps 00000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 000 TS : Top hat rail DIN EN 07 TH 000 M Ø. Ø 0/9 0 7 90/89 8/7 0/9 8/7 R0. 79 Z-079 P 00/99 8/8 /0 0/9 0/0 8/8 P 0000 P SIL 000 (SIL = with silicone seal) Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 00797 IS: Allen screws 007970 WL: Set of wall brackets = pcs 0000 TS : Top hat rail DIN EN 07 TH 0000 0/7.9 0 8 0 00/98 M / 90/88 Ø. Ø 0. 88/8 9 0/09 R0. 70 Z-0770 8 Accessories described on pages -.
P 7 07000 P 7 SIL 0700 (SIL = with silicone seal) / 09/08 7/ P 7 Z-077 / 7/ 09/07 P 8 0/8 /0 7/7 / 0 9 Ø. Ø 0/9 / 7/7 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 00799 IS: Allen screws 007990 E: Earthing bar, mounted with clamps 00900 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 0070 TS : Top hat rail DIN EN 07 TH 0070 / Ø. 9 0. Ø 0/9 00 00 80/79 8/7 7 / / R0 09 P 8 08000 P 8 SIL 0800 (SIL = with silicone seal) Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 0080 IS: Allen screws 00800 E: Earthing bar, mounted with clamps 00900 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 0070 TS : Top hat rail DIN EN 07 TH 0070 0/9 00 00 M 80/79 8/7 7 / / R0. 9 Z-077 Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data. 9
Euromas-Polyester P 9 0/9 / / * bottom due to conical form. P 9 09000 P 9 SIL 0900 (SIL = with silicone seal) 0/9 / 8/8 0/9 0 90.8 70.8 9.8 0.8 Ø. Ø 0 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 00797 IS: Allen screws 007970 E: Earthing bar, mounted with clamps 00000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 000 TS : Top hat rail DIN EN 07 TH 000 0/9 0 70 90/89 8/7 M 0. Z-077 0/9 8/7 R0. anti-turn locking device 79 P 0 00/98 8/80 / P 0 00000 P 0 SIL 0000 (SIL = with silicone seal) 0/8 /0 7/7 00/98 80 0 9 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 0080 IS: Allen screws 00800 E: Earthing bar, mounted with clamps 0000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 Ø. Ø 0/8 00 00 M 7 80/78 8/ 0/8 88/8 R0. 9 Z-077 0 Accessories described on pages -.
P 0000 P SIL 000 (SIL = with silicone seal) 00/99 8/8 / P Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00070 KP: Capstan-headed screws, sealable 00799 IS: Allen screws 007990 E: Earthing bar, mounted with clamps 0000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 0/0 87/8 9/8 00/98 80 Ø. 9 0 Ø M 0/0 0 7 / 9/9 Z-077 P 0000 P SIL 000 (SIL = with silicone seal) 00/99 8/8 / P Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 00799 IS: Allen screws 008000 E: Earthing bar, mounted with clamps 0000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 000 TS : Top hat rail DIN EN 07 TH 000 0/9 / 7/7 R 0/0 00/98 80 R0 0 9 Ø. Ø 0/8 88/8 R0 0/8 00 00. 09 M 7 0/08 80/78 8/ 0/8 88/8 R0. 09 Z-077 Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data.
Euromas-Polyester P * bottom due to conical form. P 0000 P SIL 000 (SIL = with silicone seal) 0/9. 0/9. /. /. R /. 8/8. /. Accessories (additional charge) M: Mounting plate, sheet steel, galv. 00000 KP: Capstan-headed screws, sealable 00797 IS: Allen screws 007980 E: Earthing bar, mounted with clamps 0000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 00700 TS : Top hat rail DIN EN 07 TH 0070 0/9 0 0 7 9 0 R0 0/9 7 0 M 0/9 90/89 8/7 Ø. Ø Z-0777 P 00/99 8/8 / P 0000 P SIL 000 (SIL = with silicone seal) 0/9 / 7/7 00/98 80 0 9 Ø. Ø 0/9 8/7 R0. 79 Accessories (additional charge) M: Mounting plate, sheet steel, galv. 0000 KP: Capstan-headed screws, sealable 00799 IS: Allen screws 007990 E: Earthing bar, mounted with clamps 0000 WL: Set of wall brackets = pcs 0000 TS : G-rail DIN EN 07 G 0000 TS : Top hat rail DIN EN 07 TH 000 M 0/8 00 00 7 80/78 8/ Z-0778 0/8 88/8 R0. 09 Accessories described on pages -.
Euromas small cabinets By adding hinges, you can create an interesting series of small cabinets on the basis of the tried-and-tested Euromas programme (aluminium, ABS, polycarbonate). Different hinge and fastening technologies are available. Please contact us with details of your requirements. Technical data (enclosure dimensions, materials, etc.) and the appropriate set of hinges can be found in the relevant Euromas programme. Processing (drilling, milling, printing) and terminal assignment on request. All dimensions in mm. Please refer to technical data.
Euromas-Polyester accessories Model M KP IS E WL TS TS TS P 0 00790 007900 P 0 00000 0079 00790 000 00800 0070 0070 P 00000 0079 00790 000 0000 P 00000 0079 00790 000 000 0000 0000 P 9 00000 0079 00790 000 0000 000 00 P 0079 00790 000 000 00 00 P 00790 007900 P 00000 0079 00790 000 0000 P 00000 0079 00790 000 00000 0000 0000 P 0079 00790 000 00800 0070 0070 P 7 0079 00790 000 000 00 00 P 9 00000 0079 00790 000 0000 000 00 P 0 00700 00797 007970 00800 0000 0090 0000 000 P 0000 00799 007990 00700 0000 000 0000 000 P 0000 00799 007990 0000 0000 000 0000 000 P 00800 00797 007970 00900 0000 000 0000 000 P 00900 00797 007970 00000 0000 000 000 P 0000 00797 007970 0000 0000 P 7 0000 00799 007990 00900 0000 0070 0070 P 8 0000 0080 00800 00900 0000 0070 0070 P 9 0000 00797 007970 00000 0000 000 000 P 0 0000 0080 00800 0000 0000 0000 000 P 00070 00799 007990 0000 0000 0000 000 P 00000 00799 008000 0000 0000 000 000 P 00000 00797 007980 0000 0000 00700 0070 P 0000 00799 007990 0000 0000 0000 000 M: Mounting plate, sheet steel, galvanised KP: Capstan-headed screws, sealable, set = pcs IS: Allen head screws, set = pcs E: Earthing bar, mounted with clamps WL: Set of wall brackets = pcs TS : Top hat rail DIN EN 07 TH TS : G-rail DIN EN 07 G TS : Top hat rail DIN EN 07 TH Cabinet version: If you want your enclosure(s) to be fitted with hinges, please order separately: additional charge for fitting. SchD: Set of hinges, 007800 diecast Z-00
Maximum assignment with terminal blocks Phoenix Weidmüller MBK. MBK MBK UK N UK N UK 0 N AKZ. AKZ. AKZ SAK. SAK DIN-rail TS X X X X X X DIN-rail TS X X X X X DIN-rail TS X X X Bridgeable X X X X X X X X X X End angle-piece Closing plate Connection cross-section (mm ) fine-strand... 0... Connection cross-section (mm ) single-wire.. 0 Nominal voltage (V) 00 00 00 70 70 800 00 0 00 800 800 Rating (A) 7 7. Terminal width (mm)..... 0.. Model Number per DIN-rail Number per DIN-rail P 00 x MK/ or x BK terminal block P 0 7 7 P P 9 P 9 9 9 8 P 0 P x MK/ or x BK terminal block P 0 P 9 8 P 7 7 P 7 0 0 P 9 8 8 8 8 P 0 9 0. P 0 P 0 0 9 P 8 0 P 7 8 9 0 P 0 0 P 7 7 9 0 P 8 7 9 0 P 9 7 8 9 0 P 0 P P 0 7 90 8 P 9 80 9 8 77 P All dimensions in mm. Please refer to technical data.