PD2C MATERIAL LIST Visit our website at www.paccarwinch.com for the most comprehensive collection of winch, hoist and drive information on the internet. Most publications and specification sheets are available for downloading. Refer to Publication LIT 203 for maintenance and service procedures. PACR WINCH DIVISION P.O. BOX 547 BROKEN ARROW, OK U.S.A. 7403 PHONE (98) 25-85 FAX (98) 259-575 www.paccarwinch.com LIT2299 R3 4/2009 Printed in U.S.A. Copyright 2009 PACCAR Winch Division All rights reserved.
Serial Numbers and Model Numbers are located to the left hand side of the hydraulic motor, stamped into the base. Always refer to the Serial Number and Model Number when requesting information or service parts. PD 2 C 4 05-04X - POWER DRUM EXPLANATION OF MODEL NUMBER MAX RATING DESIGN MODEL GEAR RATIO MOTOR SIZE DRUM SIZE OPTION PD DESIGNATES POWER DRUM 2 DESIGNATES 5,000 LB. FIRST LAYER LINE PULL C DESIGNATES THE MODEL SERIES RELATING TO DESIGN CHANGES 4 DESIGNATES TOTAL GEAR REDUCTION, 4 = 4.62: 05 DESIGNATES HYDRAULIC MOTOR DISPLACEMENT IN CU IN/REV (DECIMAL POINT ELIMINATED. EXAMPLE: 05 = 5. CU IN/REV) 04X DESIGNATES THE DRUM (X OPTIONS: U DESIGNATES UNDERWIND, L DESIGNATES LEFT HAND BASE, P DESIGNATES RATCHET & PAWL) PERMITS TESTING AND INSPECTION PER API 2C FOR OFFSHORE CRANES TO ORDER: () List model and serial numbers of the winch. (2) Refer to exploded view and select the component(s) needed and note item number. (3) Find item number on material list, show part number, description and quantity required on your order. (4) Refer to Parts List and show price for each component or assembly. RECOMMENDED PLANETARY GEAR OIL For simplicity, BRADEN has listed available products in each temperature range that have been tested and found to meet our specifications. This is not to say that other lubricant brands would not perform equally as well. If the following lubricant brands are not available in your area, make certain your lubricant vendor supplies you with oil that is equivalent to those products listed below. PREVAILING AMBIENT TEMPERATURE o F -40-30 -20-0 0 0 20 30 40 50 60 70 80 90 00 0 20 30 o F MOBILGEAR 600 XP 50 OR EQUIVALENT AGMA 4 EP, ISO VG 50 MOBILGEAR SHC 50 SYNTHETIC OR EQUIVALENT MOBILGEAR 600 XP 220 OR EQUIVALENT AGMA 5 EP, ISO VG 220 o C -40-30 -20-0 0 0 20 30 40 50 o C i NOTE: SHADED TEMPERATURE RANGE IN THE CHART ABOVE NOT RECOMMENDED FOR SEVERE APPLICATIONS SUCH AS: OFFSHORE CRANES, SUSTAINED FAST DUTY CYCLES OR FREQUENT LIFTING. Planetary hoists are factory filled with Mobilgear 600 XP 50, or equivalent. Consult your oil supplier for other equivalent oils if required. Mobil Shell Chevron Texaco Mobilgear 600 XP 50 Omala 50 Gear Compounds EP 50 Meropa 50 Mobilgear 600 XP 220 Omala 220 Gear Compounds EP 220 Meropa 220
BRADEN PD2C COMPONENTS 46 39 44 23 30 27 26 24 45 25 28 57 26 29 22 300 40 4 200 43 34 00 3 35 2
BRADEN PD2C MAIN ASSEMBLY COMPONENTS ITEM DESCRIPTION PART # QTY 00 Primary Planet Carrier Assembly 200 Output Planet Carrier Assembly 300 Brake Cylinder Assembly 22 Base (see below) Cable Drum (0 Drum) 26757 24 Cable Drum (02 Drum) 2558 Cable Drum (04 Drum) from S/N 902358 2883 Cable Drum (05 Drum) 2590 25 Cable Drum Closure (0 & 04 Drum) 26763 Cable Drum Closure (02 & 05 Drum) 2556 26 Ball Bearing 240 2 27 Oil Seal* (Support End) 2409 28 O-Ring* 2033 29 Oil Seal* (Drum Closure) 2288 3 Primary Thrust Race 4028 34 Output Sun See Next 35 Primary Sun Column 40 Capscrew (02 & 05 Hex Head /2 x /2) 04322 8 Capscrew (0 & 04 Hex Head /2 x -/4) 0474 8 4 Lockwasher 026 8 43 Output Thrust Race 4029 45 Drain Plug 324 45a O-Ring 23950 Cable Wedge Standard (7/6-5/8 in) 4030 57 Cable Wedge (3/8 in. 0 mm) 24494 Cable Wedge (3/4 in. 9 mm) 24492 Cable Wedge (Poly Rope - /8 in) 2443 ITEM DESCRIPTION Gear Reduction Ratio QTY 2: 29: 4: 59: Sun Gears PART # PART # PART # PART # 34 Output Sun Gear 25608 25608 2560 2560 35 Primary Sun Gear 2574 25652 25652 25640 O-RING AND SEAL KITS Part Number 675 - PD2C Seal Kit (Contains all seals and O-rings to service any PD2C winch. Not all parts in this kit will be used on any one winch.) * indicates part in seal kit Part Number 6567- Brake Valve O-Ring Kit (Contains all O-rings and backup rings to service all Braden PD2C gear motor brake valves.) BASE CONFIGURATIONS COMMON BASE PARTS ITEM DESCRIPTION PART # QTY. 30 Retaining Ring 70575 Plug Hex (Standard Winches) 3386 44 Plug Flush 24420 Sight Glass (- option) 25958 44a O-ring for Item 44 plugs* 2486 46 Relief Valve 8062 44 46 39 4 23 30 9 95 90 92 97 96 22 CAST BASE (02 & 05 DRUM) ITEM DESCRIPTION PART # QTY. 22 23 Base (Right Hand) Bearing Support (0 & 04 Drum) 2565 0645 Base (Left Hand) Bearing Support (02 & 05 Drum) 0074 0644 39 Capscrew (/2-3 X -/2 G8 Z) 04322 8 4 Lockwasher (/2) 026 8 3 FABRICATED BASE ITEM DESCRIPTION QTY -0-02 / -05-02 (LH) -04 23 BEARING SUPPORT 0645 06459 06459 06459 39 CAPSCREW (HEX HD /2 X /4 G8, Z) 8 0474 0474 0474 0474 90 BASE 26344 26344 26344 26344 9 SIDE PLATE, BEARING SUPPORT END 26764 06466 06466 2722 92 SIDE PLATE, MOTOR END 26765 06465 06537 2723 93 CAPSCREW (SPECIAL) 6 0334 0334 0334 0334 94 LOCKWASHER 6 278 278 278 278 95 96 97 TIE BAR CAPSCREW (HEX HD /2 X /4 G8, Z) LOCKWASHER (/2) 2 2 26223 0474 026 26223 0474 026 26223 0474 026 TIE BAR CAPSCREW (HEX HD /2 X /4 G8, Z) LOCKWASHER (/2) 2 4 4 26223 0474 026 94 93 DRUM OPTION CODE
THIS PAGE INTENTIONALLY LEFT BLANK 4
* OVERWIND U N D E R W STD. I N D DRUM ROTATION TO HOIST 04 & 05 DRUM/ BASE SHOWN * OVERWIND U N D E R W STD. I N D Underwound will have U in model number RH BASE (Standard) LH BASE (Optional) BRAKE CLUTCH COMPONENTS SAE B SAE C ITEM DESCRIPTION PART # PART # QTY 49 Outer brake race NSS NSS 50 Inner brake race NSS NSS 5 Sprag bearing 27684 27684 2 52 Thrust Washer 2458 2458 2 53 Retaining ring 2034 2034 2 54 Sprag clutch NSS NSS 55 Retaining ring 2403 24506 53 52 5 55 50 54 49 5 52 53 NSS- Not Serviced Seperately Replace entire assembly if wear is present BRAKE CLUTCH ROTATION Note: Designation of cable drum rotation is determined by viewing winch from hydraulic motor end while hoisting. On the BRADEN PD2C the inner race of the brake clutch sprag assembly, when viewed from the motor side, must freewheel in the direction opposite as the cable drum during hoisting PART #876 & #8774 PART #8776 & #8777 Inner Race Freewheels Clockwise when Viewed From Motor End Inner Race Freewheels CounterClockwise when Viewed From Motor End Motor Side of Brake Clutch Assembly COMPLETE BRAKE CLUTCH ASSEMBLIES PART # DESCRIPTION APPLICATION 876 RH Base Overwind, LH Base Underwind SAE C 4T 8776 RH Base Underwind, LH Base Overwind 8774 RH Overwind, LH Underwind SAE B 3T 8777 RH Underwind, LH Overwind 5
BRAKE CYLINDER ASSEMBLY NOTE: MOTOR ADAPTOR MAY BE SPLINED FOR USE IN EARLY MODEL BRAKE ASSEMBLIES. IF ITEM #23 IS SPLINED, USE SPLINED DISCS PN#2029 IF MAJOR REBUILD OF BRAKE ASSEMBLY IS REQUIRED, THE SPLINED MOTOR ADAPTOR IS REPLACED BY THE LOBED MOTOR ADAPTOR AND 8 LOBED DISKS PRIMARY PLANET CARRIER ASSEMBLY 4 3 4 ITEM DESCRIPTION PART # QTY Brake Cylinder (Lobed Disc) * 00035 Motor Adapter (4 Bolt C) 05, 064, 049/024, 064/032 00028 23 Motor Adapter (2 Bolt B) 029, 034, 039 00458 Motor Adapter (2 Bolt A) 080 00097 2 Brake Piston Seal* 25642 3 Pressure Plate 25635 4 Piston Backup Ring 25636 5 Die Spring 25644 2 6 Friction Disk 2036 7 7 Brake Disk Steel (Lobed) 00027 Brake Disc Steel (Splined) 2029 8 36 Spacer 25637 4 Lockwasher (for 4 Bolt C & 2 Bolt A) 026 4 Lockwasher (for 2 Bolt B) 278 4 42 Capscrew (/2 NC x 2 G8, Z Hex) 29855 4 47 O-Ring* 2498 48 Backup Ring* 25643 99 Spring Spacer 00200 = Brake Cylinder with cast spring pockets P/N 25564 is replaced by 00035 brake cylinder and 00200 spring spacer 37 5 2 0 ITEM DESCRIPTION Gear Reduction Ratio QTY 2: 29: 4: 59: Primary Carrier Assy PART # PART # PART # PART # 8805 8806 8807 880 0 Primary Planet Carrier 2575 25730 25606 25604 Primary Planet Gear 26280 26278 26278 26276 3 2 Primary Planet Gear Shaft 2564 2564 2564 2564 3 3 Bearing 2475 2475 2475 2475 3 4 Thrust Washer 2536 2536 2536 2536 6 5 Rollpin (Primary Planet Carrier) 243 243 243 243 3 37 Primary Thrust Plate 25729 25729 25729 25729 6
OUTPUT PLANET CARRIER ASSEMBLY 7 2 5 38 9 20 9 2 8 6 ITEM DESCRIPTION Gear Reduction Ratio QTY 2: 29: 4: 59: Output Carrier Assy PART # PART # PART # PART # 8804 8804 8802 8802 5 Rollpin (Output Planet Carrier) 23584 23584 23584 23584 3 6 Output Planet Carrier 25602 25602 25562 25562 7 Output Planet Gear 26279 26279 26277 26277 3 8 Output Planet Gear Shaft 2563 2563 2563 2563 3 9 Bearing 25292 25292 25292 25292 6 20 Bearing Spacer 25443 25443 25443 25443 3 2 Thrust Washer 24306 24306 24306 24306 6 38 Output Thrust Plate 25638 25638 25638 25638 7
STANDARD MOTOR GROUPS 66 63 6 59 62 60 83 65 58 65 66 68 70 6 62a 59 60 83 58 66 65 68 63 V 33/20 TWO-SPEED, BRAKE VALVE 879 V 33/20 TWO-SPEED, BRAKE VALVE 29576 6 62 68 59 72 59 6 68 62 64 64 69 40 4 69 40 4 63 67 85 65 70 66 049/024 & 064/032 MOTOR TWO-SPEED 63 65 67 60 58 70 83 05 & 064 MOTOR SINGLE-SPEED 66 63 66 62b 62a 60 59 40 4 6 62b 66 62a 59 70 72 68 65 65 68 07 & 062 MOTOR SINGLE-SPEED 080 MOTOR SINGLE-SPEED 8
MOTOR GROUPS 59 68 6 64 68 63 60 83 58 66 65 67 70 029, 034, & 039 MOTOR SINGLE-SPEED 69 Hydraulic Motors ITEM DESCRIPTION PART # QTY Pilot O-Ring* 029 (2 bolt B) 25385 2063 034 (2 bolt B) 2492 2063 039 (2 bolt B) 2555 2063 039 (2 bolt B) Underwound 03887 2063 039 (4 bolt C) CT winches 25896 0330 5 05 (4 bolt C) 25897 0330 064 (4 bolt C) 25777 0330 049/024 (4 bolt C) 2682 0330 V33/20 (4 bolt C) 0074 0330 064/032 (4 bolt C) 28956 0330 07 Replaced By 062 (2 bolt B) * 06079 2063 080 (2 bolt A) 2624 22586 MOTOR GROUP (STANDARD WINCHES) 049/024 ITEM QTY DESCRIPTION 039, 05, 064 064/032 029, 034, 039 080 07/062 V33/20 4 BOLT-C 4 BOLT-C 2 BOLT-B 2 BOLT-A 2 BOLT-B 4 BOLT-C 40 4 CAPSCREW 04322 04322 04322 2908 04322 04322 4 4 LOCKWASHER 026 026 026 026 026 026 58 MANIFOLD 24779 25539 25664 59 O-RING 3838 3838 25366 7832 2273 2465 4 CAPSCREW 244 2963 60 4 CAPSCREW EARLY 3544 3544 4 CAPSCREW CURRENT 3827 3827 6 4 CAPSCREW 234 234 25622 29630 3587 62 BRAKE VALVE ASSY 872 8984 875 879 62A BRAKE VALVE BLOCK 2625 27403 29576 62B BRAKE VALVE CARTRIDGE 2626 27258 29598 63 HOSE ASSY 25749 25749 25749 25952 25952 64 HOSE ASSY 3704 3707 3704 65 ADAPTER 25864 25864 25864 25864 25864 25864 66 FITTING 263 25864 253 3284 25302 25302 67 SWIVEL TEE 25748 25748 25748 68 CONNECTOR 25302 25302 25302 2640 2640 2640 69 REDUCER ELBOW 24236 24236 24236 70 HOSE ASSY 25750 25750 25750 25750 25952 72 HYD. MOTOR 73 NEEDLE VALVE 74 TEE-MALE BRANCH 75 6445-4 CAP NUT 76 WARNING TAG 83 O-RING 250 25366 2465 85 TEE, -4 ORB 29078 NOTE: These drawings are standard configurations. Verify hoses, fittings, and capscrews using tables found on pages 0 and. 9
MOTOR GROUPS (- OPTION) 62 6 73 74 68 63 59 59 6 73 74 68 62 64 40 4 64 69 40 4 66 70 64 85 67 75 65 049/024 & 064/032 MOTOR TWO-SPEED PERSONNEL HANDLING 70 67 65 75 58 60 83 66 63 69 05 & 064 MOTOR SINGLE-SPEED PERSONNEL HANDLING 83 60 66 62 59 68 64 6 73 74 63 70 65 75 67 029, 034, & 039 MOTOR SINGLE-SPEED PERSONNEL RATED MOTOR GROUPS (PERSONNEL RATED WINCHES) ITEM QTY DESCRIPTION 05 & 064/032 64 049/024 029/034/039 40 4 CAPSCREW 04322 04322 04322 4 4 LOCKWASHER 026 026 026 58 MANIFOLD 24779 25539 59 O-RING 3838 3838 25366 CAPSCREW 244 60 4 CAPSCREW EARLY 3544 CAPSCREW CURRENT 3827 6 4 CAPSCREW 234 234 25622 62 BRAKE VALVE ASSY 872 8984 875 62A BRAKE VALVE BLOCK 62B BRAKE VALVE CARTRIDGE 63 HOSE ASSY 3707 3707 3707 64 HOSE ASSY 3704 3704 3704 65 ADAPTER 25864 25864 25864 66 FITTING 265 25302 253 67 SWIVEL TEE 25748 25748 25748 68 CONNECTOR 24784 24784 24784 69 REDUCER ELBOW 24236 24236 24236 70 HOSE ASSY 373 373 373 72 HYD MOTOR 73 NEEDLE VALVE 25258 25258 25258 74 TEE-MALE BRANCH 22934 22934 22934 75 6445-4 CAP NUT 7082 7082 7082 76 WARNING TAG 25257 25257 25257 83 O-RING 250 25366 85 TEE, -4 ORB 29078 NOTE: These drawings are standard configurations. Verify hoses, fittings, and capscrews using tables found on pages 0 and. 0
BRAKE VALVE PARTS ITEM DESCRIPTION PART # QTY BRAKE VALVE HOUSING NSS 2 VALVE SPRING RETAINER 24424 RELIEF RETAINER (879 VALVE) 29609 3 SPRING RETAINER 2483 4 PLUG 22450 5 SPOOL NSS 6 DAMPER PISTON NSS 7 O-RING * 2486 2 8 CHECK VALVE POPPET 24423 RELIEF ASSEMBLY (879 VALVE) 8232 9 PILOT ORIFICE 24200 0 CHECK VALVE SPRING 2490 SPOOL SPRING 2492 2 O-RING* 2360 2 3 O-RING* 2493 4 O-RING* 2494 5 BACK-UP RING* 2495 6 BACK-UP RING* 2496 22 SHIM, VALVE SPRING 2566-7 BALL, STEEL * (872 & 875) 258 8 COMPRESSION SPRING 25480 9 ELBOW FITTING 25302 9 Plug -4 ORB (8984 & 879) 25663 59 O-Ring 3838 NSS = Not Serviced Seperately * = Included in Brake O-Ring Kit #6567 Brake Valves PART # FLANGE 872 /4" CODE 6 875 " CODE 6 879 3/4 " CODE 62 8984 /4" CODE 6 CAPSCREWS AND LOCKWASHERS PART # DESCRIPTION 2963 5/6 NC x 3 G8, Socket Head 2654 3/8 NC x 3 /2 G8, Socket Head 25622 3/8 NC x 2 3/4 G8, Socket Head 29630 3/8 NC x 4 G8, Socket Head 3587 3/8 NC x 3 G8, Socket Head 3544 3/8 NC x /2 G8, Socket Head EARLY 3827 3/8 NC x /4 G8, Socket Head CURRENT 235 7/6 NC x /2 G8 Z Socket Head 0438 7/6 NC x 3/4 G8 Z Hex Head 244 7/6 NC x 2 G8 Z Socket Head 234 7/6 NC x 3 G8 Z Socket Head 050 7/6 NC x 3 3/4 G8 Z Socket Head 0474 /2 NC x /4 G8 Z Hex Head 04322 /2 NC x /2 G8 Z Hex Head 2908 /2 NC x /2 G8 Z Socket Head 29855 /2 NC x 2 G8 Z Hex Head 03249 5/8 NC x 3/4 G8 Z Hex Head 026 Lockwasher /2 Split, Z 02423 Lockwasher 5/8 Split, Z PART # LENGTH 370 8 in. NPT -2 to JIC -4 37 0 in. NPT -2 to JIC -4 3704 2 in. NPT -2 to JIC -4 3706 6 in. NPT -2 to JIC -4 3707 7 in. NPT -2 to JIC -4 373 22 in. NPT -2 to JIC -4 24948 30 in. NPT -2 to JIC -4 25750 7 in. JIC -4 both ends 25952 20 in, JIC -4 both ends 25749 22.5 in. JIC -4 both ends 06269 4 in. ORFS swivel -8 06270 7 in. ORFS swivel -8 HOSE ASSEMBLIES SPLIT FLANGE ADAPTER EARLY - Use socket head capscrews 3544. PART NO. DESCRIPTION 25539 Split Flange Adapter CURRENT - Use socket head capscrews 3827.
FITTINGS A B C D E G H F I J K L M N O P PART # DESCRIPTION ID 25302 Elbow, -4 JIC to -4 ORB A 253 Elbow, -4 JIC to -6 ORB A 22934 Tee, /8-27 NPT-F Run to /8-27 NPT-M Branch B 24236 Street Elbow, Reducer, /4-8M to /8-27F C 3708 Street Elbow, /8-27 D 24784 Adapter, 7/6 ORB to /8-27 NPT-F E 25748 Swivel Tee, -4 JIC M Run X -4 JIC F Swivel Branch F 25864 Adapter, -4 JIC to -4 ORB G 3284 Adapter, -4 JIC to -6 ORB G 25258 Needle Valve H 265 Elbow (45 deg), -2 NPT to -4 JIC I 263 Elbow (90 deg), -2 NPT to -4JIC I 29078 Tee, -4 ORB to -4 JIC J 00945 ELBOW, ORFS Swivel K 00946 Adapter, -4 ORB to -6 ORFS L 02632 Tee, -4 ORFS to -6 ORB M 69325 Plug, -4 ORB N 7082 Cap, -4 JIC O 22934 Tee, F'M pipe to Male pipe -2 P 23508 Reducer Pipe -4 to -2-2640 Elbow JIC Swivel -4/-4 - Bolt Diam. Inches /4 5/6 3/8 7/6 /2 9/6 5/8 Thread per inch 20 28 8 24 6 24 4 20 3 20 2 8 8 RECOMMENDED FASTENER TORQUE Torque LB-FT (N.m) Torque LB-FT (N.m) Grade 5 Grade 8 Bolt Diam. Thread per Grade 5 Grade 8 Dry Lubed Dry Lubed Inches inch Dry Lubed Dry Lubed 8 () 7 (23) 3 (42) 50 (68) 75 (02) 0 (49) 50 (203) 6 (8) 3 (7) 23 (3) 35 (47) 55 (75) 80 (08) 5 (56) 2 (6) 24 (33) 45 (6) 70 (95) 0 (49) 50 (203) 20 (285) 9 (2) 8 (24) 35 (47) 50 (68) 80 (08) 0 (49) 60 (27) To convert LB-FT to Kg-m, multiply LB-FT value by 0.383 3/4 7/8 /8 /4 3/8 /2 0 6 9 4 8 4 7 2 7 2 6 2 6 2 265 (359) 420 (569) 640 (868) 790 (07) 20 (58) 460 (979) 940 (2360) 200 (27) 325 (44) 485 (658) 590 (800) 835 (32) 095 (485) 460 (979) 380 (55) 600 (83) 90 (234) 290 (749) 820 (2468) 2385 (3234) 360 (4284) 280 (380) 450 (60) 680 (922) 970 (35) 360 (87) 790 (2427).2370 (324) 8-2008 2
METRIC CONVERSION TABLE MULTIPLY: BY: TO GET: MULTIPLY: BY: TO GET: LINEAR inches (in.) X 25.4 = millimeters (mm) millimeters (mm) X 0.3937 = inches (in.) feet (ft.) X 0.3048 = meters (m) meters (m) X 3.28 = feet (ft.) miles (mi.) X.6093 = kilometers (km) kilometers (km) X 0.624 = miles (mi.) AREA inches 2 (sq.in.) X 645.5 = millimeters 2 (mm 2 ) millimeters 2 (mm 2 ) X 0.00055 = inches 2 (sq.in.) feet 2 (sq.ft.) X 0.0929 = meters 2 (m 2 ) meters 2 (m 2 ) X 0.764 = feet 2 (sq.ft.) VOLUME inches 3 (cu.in.) X 0.0639 = liters (l) liters (l) X 6.024 = inches 3 (cu.in.) quarts (qts.) X 0.94635 = liters (l) liters (l) X.0567 = quarts (qts.) gallons (gal.) X 3.7854 = liters (l) liters (l) X 0.2642 = gallon (gal.) inches 3 (cu.in.) X 6.39 = centimeters 3 (cc) centimeters3 (cc) X 0.0602 = inches 3 (cu.in.) feet 3 (cu.ft.) X 28.37 = liters (l) liters (l) X 0.0353 = feet 3 (cu.ft.) feet 3 (cu.ft.) X 0.02832 = meters 3 (m 3 ) meters3 (m3) X 35.35 = feet 3 (cu.ft.) fluid ounce (fl.oz.) X 29.57 = millileters (ml) milliliters (ml) X 0.0338 = fluid ounce (fl.oz.) MASS ounces (oz.) X 28.35 = grams (g) grams (g) X 0.03527 = ounces (oz.) pounds (lbs.) X 0.4536 = kilograms (kg) kilograms (kg) X 2.2046 = pounds (lbs.) tons (2000 lbs.) X 907.8 = kilograms (kg) kilograms (kg) X 0.0002 = tons (2000 lbs.) tons (2000 lbs.) X 0.9078 = metric tons (t) metric tons (t) X.023 = tons (2000 lbs.) tons (long) (2240 lbs.) X 03.05 = kilograms (kg) kilograms (kg) X 0.000984 = tons (long) (2240 lbs.) PRESSURE inches Hg (60 o F) X 3600 = kilopascals (kpa) kilopascals (kpa) X 0.296 = inches Hg (60 o F) pounds/sq.in. (PSI) X 6.895 = kilopascals (kpa) kilopascals (kpa) X 0.45 = pounds/sq.in. (PSI) pounds/sq.in. (PSI) X 0.0703 = kilograms/sq.cm. (kg/cm 2 ) kilograms/sq.cm. (kg/cm2) X 4.22 = pounds/sq.in. (PSI) pounds/sq.in. (PSI) X 0.069 = bars bars X 4.5 = pounds/sq.in. (PSI) inches H 2O (60 o F) X 0.2488 = kilopascals (kpa) kilopascals (kpa) X 4.093 = inches H 2O (60 o F) bars X 00 = kilopascals (kpa) kilopascals (kpa) X 0.0 = bars POWER horsepower (hp) X 0.746 = kilowatts (kw) kilowatts (kw) X.34 = horsepower (hp) ft.-lbs./min. X 0.0226 = watts (W) watts (W) X 44.25 = ft.-lbs./min. TORQUE pound-inches (in.-lbs.) X 0.298 = newton-meters (N-m) newton-meters (N-m) X 8.85 = pound-inches (in.lbs.) pound-feet (ft.-lbs.) X.3558 = newton-meters (N-m) newton-meters (N-m) X 0.7376 = pound-feet (ft.-lbs.) pound-feet (ft.-lbs.) X.383 = kilograms/meter (kg-m) kilogram/meter (kg-m) X 7.233 = pound-feet (ft.-lbs.) VELOCITY miles/hour (m/h) X 0.298 = kilometers/hour (km/hr) kilometers/hour (km/hr) X 0.624 = miles/hour (m/h) feet/second (ft./sec.) X 0.3048 = meter/second (m/s) meters/second (m/s) X 3.28 = feet/second (ft./sec.) feet/minute (ft./min.) X 0.3048 = meter/minute (m/min) meters/minute (m/min) X 3.28 = feet/minute (ft./min.) TEMPERATURE o Celsius = 0.556 ( o F - 32) o Fahrenheit = (.8 X o C) + 32 COMMON METRIC PREFIXES mega (M) 6 =,000,000 or 0 deci (d) = 0. or 0 - kilo (k) =,000 or 0 3 centi (c) = 0.0 or 0-2 hecto (h) = 00 or 0 2 milli (m) = 0.00 or 0-3 deka (da) = 0 or 0 micro (m) = 0.000.00 or 0-6 3