This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product is tested according to EU noise legislation 000//EC Phase Ratings, 0 Hz, PF 0,8 Rating (ESP) Prime Rating (PRP) Voltage kva kw kva kw Amp 00/0,60 9,0 0,60 8,0,0 Rating (ESP): Prime Rating (PRP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. ESP is in accordance with ISO 88. Overload is not allowed. Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 88. 0 % overload capability is available for a period of hour within -hour perod of operation,in accordance with ISO 06. STANDARD SPECIFICATIONS Water cooled, Diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack and cables Engine coolant heater Base frame design incorporates an integral fuel tank and anti-vibration isolators Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust silencer and steel bellows supplied separately Static battery charger Manual for application and installation OPTIONAL EQUIPMENTS ENGINE - Remote Radiator Cooling - Fuel-Water Seperator Filter ALTERNATOR - Anti-Condensation Heater OTHER ACCESSORIES - Automatic or manual fuel filling system - Manual oil drain pump - Residential silencer - Enclosure: weater protective or sound attenuated - Trailer - Tool kit for maintenance - Main Fuel Tank CONTROL SYSTEM - Charge Ammeter TRANSFER SWITCH - Three Pole Contactor - Four Pole Contactor - Motor Switch Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice. AKS 8060
DIESEL ENGINE SPECIFICATIONS Manufacturer Model No. of Cylinders and Build Aspiration and Cooling Maximum Power Total Displacement L,00 Bore and Stroke mm 80 X 90 Compression Ratio 8: Rated Speed (rpm) rpm 00 Governor Oil Capacity L,0 Coolant Capacity L 7,00 Intake Air Flow m³ /min.,60 Radiator Cooling Air m³ /min. 80,00 Exhaust Gas Flow m³ /min.,0 Mechanical Exhaust Gas Temperature C 0,00 Start System Fuel Consumption Load L/h Aksa ACRX Cylinder, In Line Naturally Aspirated V d.c. %00,0 00 rpm,0 kw [8,00HP] ALTERNATOR SPECIFICATIONS Make Aksa Frequency Hz 0 Power kva,00 Design Brushless, poles Cos Phi 0,80 Phase Voltage V 00/0 Insulation Class H Rotor Single Bearing System, Flexible Disc Excitation System Electronic ( AVR ) DIEMENSIONS AND WEIGHT Open Type Dry Weight Lenght Width Height Tank Capacity kg. L 0,00 00,00 760,00 97,00,00 Canopy Dry Weight Lenght Width Height Tank Capacity kg. L ANS 70 8 7 Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice. AKS 8060
- Control System 6 Devices Construction and Finish Installation Generating Set Control Unit Standard Specifications Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice. AKS 8060
Instruments Options Static Battery Charger Protection Circuits Standards Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice. AKS 8060
ANS - Canopy 6 7 8 9 0 Steel structures. Emergency stop push button. Control panel Corrosion-resistant locks and hinges. oil could be drained via valve and a hose Exhaust system in the canopy. special large access doors for easy maintanance Base frame -fuel tank. Lifting Points. sound proofing materials Power out Introduction Sound-attenuated and weather protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers.our modular designed sound insulated canopies (8 7kVA) fit directly to the open generator set to provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability. Standard Specifications Compact footprint, low profile design. Enclosure, generator set, exhaust system and base-tank are pre-assembled, package Body made from steel components treated with polyester powder coating Fire retardant foam insulation Easy access to all service points Exhaust system inside canopy Large doors on each side Control panel viewing window in a lockable access door Emergency stop push button mounted on enclosure exterior Cooling fan and battery charging alternator fully guarded Fuel fill and battery can only be reached via lockable access doors. Lifting points on the top of canopy and base frame Customer options available to meet your applications needs. pre-integrated and shipped as one Width 8 Lenght Height 7 Fuel Tank Capacity L Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice. AKS 8060