powerful high-performance shipping and storage systems Shipping and Storage Technology
Model 1002 Model Series 1000 folding universal mesh boxes All load carriers of the model series 1000 are suitable for universal use As standard one longitudinal wall is foldable. This enables easy removal of the transport goods even when stacked. As an option it is possible to equip multiple side walls with folding elements When empty the load carriers can be stacked to save space Identification marking is possible with additional plates or colour schemes Possible to drive forklift forks in from all four sides From an outside dimension of 1800 mm on, as standard all boxes of this model series have a tip-over safety device on the narrow sides for safe forklift operation Total height 1000 or 700 mm or custom dimensions for this series on request Material used: Steel St 37-2 (1.0037/S235JR) Paintwork (free of chromium, chromate and silicon) RAL 6011 (reseda green, standard), other RAL colours on request for an extra charge All walls are easy to dismantle and exchange in the case of repair Option: Design as solid wall box possible for an extra charge Option: Guide rails at the narrow or longitudinal side of the box for the storage / stacking of high-quality components that need special protection Model 1001 Model 1001 Model 1001 in folded state Model 1001 Standard box 1002 with total height 700 mm Model 1002 Length x Width x Height in (mm) 1200 x 1000 x 1000 1600 x 1200 x 1000 Outside dimensions, folded in (mm) 1200 x 1000 x 380 1600 x 1200 x 380 Inside dimensions (mm) 1110 x 910 x 812 1510 x 1110 x 812 Useful volume (m 3 ) 0,8 1,36 Filling height (mm) 812 812 Ground clearance (mm) 100 100 Tare weight (kg) 118 155 Useful load (kg) 1382 1345 Stacking load (kg) 9000 9000 Order No. 1001 1002 Features All walls can be completely lined with plastic panels Plastic panels optionally made from polyethylene or polypropylene, on request also electrically conductive. 2 Model Series 1000 Model Series 1000 3
Model Series 1000 folding universal mesh boxes Special requests We are happy to fulfill special requests of our customers, such as individual taring of boxes, attachment of specific marking plates, marking with company logo etc. Model 1006 Model Series 1000 Model 1006 Model 1007 Model 1008 Model 1008 Length x Width x Height in (mm) 2400 x 1200 x 1000 2600 x 1200 x 1000 3000 x 1200 x 1000 Outside dimensions, folded in (mm) 2400 x 1200 x 395 2600 x 1200 x 395 3000 x 1200 x 395 Model 1005, folded Inside dimensions (mm) 2310 x 1110 x 797 2510 x 1110 x 797 2910 x 1110 x 797 Useful volume (m 3 ) 2,05 2,22 2,57 Filling height (mm) 797 797 797 Model 1005, stacked powerful Strong, where others are weak. Tare weight (kg) 226 235 250 Useful load (kg) 1274 1265 1250 Stacking load (kg) 9000 9000 9000 Order No. 1006 1007 1008 Model Series 1000 Model 1004 Model 1003 Model 1004 Model 1004 with total height 700 mm Model 1005 Model Series 1000 Model 1009 Length x Width x Height in (mm) 1800 x 1200 x 1000 2000 x 1200 x 1000 2200 x 1200 x 1000 Outside dimensions, folded in (mm) 1800 x 1200 x 395 2000 x 1200 x 395 2200 x 1200 x 395 Inside dimensions (mm) 1710 x 1110 x 797 1910 x 1110 x 797 2310 x 1110 x 797 Useful volume (m 3 ) 1,5 1,69 1,87 Filling height (mm) 797 797 797 Tare weight (kg) 180 190 205 Useful load (kg) 1320 1310 1295 Stacking load (kg) 9000 9000 9000 Order No. 1003 1004 1005 Length x Width x Height in (mm) 1000 x 600 x 700 Outside dimensions, folded in (mm) 1000 x 600 x 410 Inside dimensions (mm) 910 x 510 x 515 Useful volume (m 3 ) 0,24 Filling height (mm) 515 Ground clearance (mm) 100 Tare weight (kg) 60 Useful load (kg) 750 Stacking load (kg) 3000 Order No. 1009 Features All walls are lined completely sheet metal panels Both longitudinal walls can be designed foldable, as a result removal of the content is also possible from both lengthwise sides when stacked (option for an extra charge). 4 Model Series 1000 Model Series 1000 5
Model Series 2000 & 3000 Cage frames & universal mesh boxes Model Series 4000 Robust solid wall box Cage frame with solid base frame made from folded sheet steel Floor plate beaded One-piece corner posts 5 mm thick, additionally reinforced with strong gusset plates Standard coating RAL 6011 green powerful Strong, where others are weak. Model Series 2000 Model 2001 Model 2002 Model 2003 Length x Width x Height in (mm) 1000 x 800 x 680 1200 x 800 x 680 1200 x 1000 x 680 Inside dimensions (mm) 1000 x 700 x 500 1200 x 700 x 500 1200 x 900 x 500 Useful volume (m 3 ) 0,35 0,42 0,54 Stacking height (mm) 680 680 680 Filling height (mm) 500 500 500 Entry widths (mm) 885/685 1085/685 1085/885 Tare weight (kg) 52 58 66 Useful load (kg) 1500 1500 1500 Robust solid wall box with one-piece 5 mm thick corner posts and cranked stacking pockets (with crane eyes on request) Side walls and floor 2 mm thick, beaded With hinged section on the longitudinal side of the box on request Standard coating RAL 6011 green Stacking load (kg) 4500 4500 4500 Order No. 2001 2002 2003 Universal mesh boxes, floor group and walls made from angle steel Mesh made from construction steel webbing 50 x 50 x 4.0 mm Floor plate 2 mm thick, beaded One-piece corner posts 5 mm thick With hinged section on the longitudinal side of the box on request Standard coating RAL 6011 green Model Series 3000 Model 3011 Model 3012 Model 3012 Model Series 4000 Model 4001 Model 4002 Model 4003 Length x Width x Height in (mm) 1000 x 800 x 600 1200 x 800 x 600 1200 x 1000 x 600 Length x Width x Height in (mm) 1000 x 800 x 600 1200 x 800 x 600 1200 x 1000 x 600 Inside dimensions (mm) 975 x 775 x 500 1175 x 775 x 500 1175 x 975 x 500 Inside dimensions (mm) 925 x 725 x 500 1125 x 725 x 500 1175 x 975 x 500 Useful volume (m 3 ) 0,38 0,46 0,57 Useful volume (m 3 ) 0,34 0,41 0,57 Stacking height (mm) 600 600 600 Stacking height (mm) 600 600 600 Filling height (mm) 500 500 500 Filling height (mm) 500 500 500 Entry widths (mm) 885/685 1085/685 1085/885 Entry widths (mm) 885/685 1085/685 1085/885 Tare weight (kg) 47/50 51/54 56/60 Tare weight (kg) 65/68 71/75 56/60 Useful load (kg) 1250 1250 1250 Useful load (kg) 2000 2000 1250 Stacking load (kg) 5000 5000 5000 Stacking load (kg) 10000 10000 5000 Order No. 3001 3002 3003 Order No. 4001 4002 3003 Order No. with hinged section 3011 3012 3013 Order No. with hinged section 4011 4012 3013 6 Model Series 2000 / 3000 Model Series 4000 7
Custom Designs for transport and storage systems Custom frame for the transport and protective storage of engine hoods for the utility vehicle industry Special frame for engine hoods in the utility vehicle industry. Length x Width x Height in (mm) 1900 x 1200 x 1250 Tare weight (kg) 184 Filling capacity (units) 10 Custom Designs for transport and storage systems If you cannot find a suitable solution for your task in the standard Elkas range, we will develop a custom load carrier coordinated precisely to your requirements. Custom load carrier for car side panels with automatic locking The hold-down units can be locked and unlocked both automatically as well as manually. Length x Width x Height in (mm) 2500 x 1200 x 2000 Tare weight (kg) 372 Filling capacity (units) 12 Tailored for the field of activity, we design and construct the matching products. With the knowledge of our employees and the experience gained from many projects we regularly arrive at practical and economically attractive solutions. Elkas containers are designed and constructed, so that they can be integrated seamlessly into the material flow. Every custom container is first produced as a sample and tested in its area of activity. Details are then optimized during discussions, before the load carrier goes into series production. Custom load carrier for car wing with manual locking Optimum component protection for highly sensitive outer skin parts. Length x Width x Height in (mm) 2400 x 1600 x 1500 Tare weight (kg) 281 Filling capacity (units) 12 8 Custom Designs Custom Designs 9
Custom Designs for transport and storage systems Folding custom load carrier for Diesel engines with central one-handed locking The engine load carrier can be locked and unlocked with one hand. In the unloaded state the load carrier can be stored and transported with reduced volume by means of the hinged joint. Length x Width x Height in (mm) 2400 x 1500 x 520 Tare weight (kg) 349 Filling capacity (units) 6 Folding stanchion rack for outer skin parts of a sliding door In automatic operation the stanchion rack can be positioned precisely with the help of centering plates. The partly galvanized stanchions are designed foldable, in order to save valuable storage and transport capacities. Length x Width x Height in (mm) 2400 x 1800 x 1240/500 Tare weight (kg) 443 Useful load (kg) 1000 Stacking load (kg) 6000 Special pallet for the storage of foamed parts for cars An intermediate floor made from double-walled panels has been designed able to fold up, making loading possible on two levels. Length x Width x Height in (mm) 1200 x 800 x 1000 Tare weight (kg) 113 Special rack for the storage and transport of electrodes made from compressed graphite for the steel industry Length x Width x Height in (mm) 1210 x 1200 x 650 Tare weight (kg) 717 Filling capacity (units) 3 Number of levels 2 Custom load carrier for C-column linings with compartments made from double-walled panels Optimum component protection through the separation of the compartments and the plastic cover at the operator side. Length x Width x Height in (mm) 1600 x 800 x 1500 Special pallet for the automatic storage of cores in the foundry industry Length x Width x Height in (mm) 2000 x 800 x 680 Tare weight (kg) 116 Tare weight (kg) 157 Number of compartments 12 10 Custom Designs Custom Designs 11
Shipping and Storage Technology Elkas GmbH & Co. KG, Shipping and Storage Technology Bahnhofstraße 30 35075 Gladenbach (Germany) Phone: + 49 (0) 6462 / 91 95-0 Fax: + 49 (0) 6462 / 91 95-26 Internet: www.elkas.de E-Mail: info@elkas.de