GRUNDFOS DATA BOOKLET CRT 4-5 A-P-A-E-AUUE 3x23D/4Y V Grundfos pump 961798 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crt4/961798/crt-4-5-a-p-a-e-auue.html info@lenntech.com tel. +31 152 61 9 fax. +31 152 616 289 BE > THINK > INNOVATE
Position Qty. Description 1 CRT 4-5 A-P-A-E-AUUE Product No.: On request Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation. The pump has the following characteristics: - Impellers, intermediate chambers and outer sleeve are made of Titanium. - Pump head cover and base are made of Titanium. - The shaft seal has assembly length according to EN 12756. - Power transmission is via cast iron split coupling. - Pipework connection is via PJE flanges/couplings. The motor is a 3-phase AC motor. Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Technical: Rated flow: Rated head: Primary shaft seal: Approvals on nameplate: Curve tolerance: Materials: Pump housing: Impeller: Bush material: 6 m³/h 3.6 m AUUE CE,TR ISO996:212 3B Titanium ASTM B 265 Titanium ASTM B 265 NONE Installation: Maximum ambient temperature: 6 C Max pressure at stated temp: 25 bar / 12 C 25 bar / -2 C Flange standard: PJE Pipe connection: 42,4 mm Flange size for motor: FT1 Electrical data: Motor type: IE Efficiency class: Rated power - P2: Power (P2) required by pump: Mains frequency: Rated voltage: 8C IE3 1.1 kw 1.1 kw 1.1 kw 5 Hz 3 x 22-24D/38-415Y V 1/1
Position Qty. Description Rated current: 4.35/2.5 A Starting current: 45-5 % Cos phi - power factor:.83-.76 Rated speed: 284-287 rpm Efficiency: IE3 82,7% Motor efficiency at full load: 82.7 % Motor efficiency at 3/4 load: 84.6 % Motor efficiency at 1/2 load: 85.4 % Number of poles: 2 Enclosure class (IEC 34-5): 55 Dust/Jetting Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 19.7 kg Gross weight: 24.7 kg 2/1
On request CRT 4-5 A-P-A-E-AUUE 5 Hz H [m] CRT 4-5, 3*4 V, 5Hz eta [%] 5 1 45 9 4 8 35 7 3 6 25 5 2 4 15 3 1 2 5 1 P [W].5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 6. 6.5 7. 7.5 8. Q [m³/h] NPSH [m] 1 P1 5 8 P2 4 6 3 4 2 2 1 3/1
4 x ø13 ø42.2 21 211 18 151 1 141 19 Description Value General information: Product name: CRT 4-5 A-P-A-E-AUUE Product No: On request EAN number: On request Technical: Rated flow: 6 m³/h Rated head: 3.6 m Head max: 5.7 m Stages: 6 Impellers: 5 Primary shaft seal: AUUE Approvals on nameplate: CE,TR Curve tolerance: ISO996:212 3B Pump version: A Model: A Materials: Pump housing: Titanium ASTM B 265 Impeller: Titanium ASTM B 265 Material code: A Code for rubber: E Bush material: NONE Installation: Maximum ambient temperature: 6 C Max pressure at stated temp: 25 bar / 12 C 25 bar / -2 C Flange standard: PJE Pipe connection: 42,4 mm Flange size for motor: FT1 Connect code: P Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Electrical data: Motor type: 8C IE Efficiency class: IE3 Rated power - P2: 1.1 kw Power (P2) required by pump: 1.1 kw 1.1 kw Mains frequency: 5 Hz Rated voltage: 3 x 22-24D/38-415Y V Rated current: 4.35/2.5 A Starting current: 45-5 % Cos phi - power factor:.83-.76 Rated speed: 284-287 rpm Efficiency: IE3 82,7% Motor efficiency at full load: 82.7 % Motor efficiency at 3/4 load: 84.6 % Motor efficiency at 1/2 load: 85.4 % Number of poles: 2 Enclosure class (IEC 34-5): 55 Dust/Jetting Insulation class (IEC 85): F Motor protec: NONE Motor No: 85U515 Others: Minimum efficiency index, MEI :.7 Net weight: 19.7 kg Gross weight: 24.7 kg 367 251 H [m] P [W] 5 5 45 4 35 3 25 2 15 1 5 1 CRT 4-5, 3*4 V, 5Hz 1 2 3 4 5 6 7 8 6 4 2 19 141 1 151 21 ø42.2 22 HIGH VOLTAGE DIRECTION OF ROTATION L1 L2 L3 L1 L2 L3 LOW VOLTAGE DIRECTION OF ROTATION 18 211 98.3169 4 x ø13 Q [m³/h] P1 P2 9 8 7 6 5 4 3 2 1 eta [%] 1 5 4 3 2 1 NPSH [m] 4/1
On request CRT 4-5 A-P-A-E-AUUE 5 Hz 5 22 1 151 21 18 211 4 x ø13 367 251 ø42.2 19 141 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 5/1
Exploded view 251a 251d 77 28 7 7a 17 31a 219 92 31a 11 9 92 51 11b 15 1 215a 215 66a 67 49 45 18 53a 53 215a 217 531a 534 531 534a 6 6/1
Sectional drawing (TM582 for TPE2,TPE3) 5 4 3 2 1 TM582 7/1
Exploded view ( TM5726 for MGE model H/I ) 251d 251b 291 29 293 287 287a 52 277a 273b 277 252a 286 273a 273 275a 266 268 268a 289a 289 251a 288b 288 288a 252b 159e 157 158 15 156c 156 151 152 172 154 185 178 156d 187 153 188 191 156c 156b 192 159d 8/1
Parts list CRT 4-5, Product No. On request Valid from 1.5.211 (1117) Pos Description Annotation Données de classification Référence Quantité Unité + Motor 1 pcs - Base cpl. 1 pcs Plug 2 6 Base 1 56 Base plate 1 - Pump head cpl. 1 pcs 2 Pump head 1 7 Coupling guard 2 7a Combi Slot Torx screw 4 9 Hex socket head cap screw Designation: DIN 912 4 Length (mm): 2 Thread: M6 1 Shaft pin Diameter: 5 1 Length (mm): 26 1a Coupling half 2 18 Air vent screw Thread: R 1 23 Plug 1 28 Hex head screw Length (mm): 25 MM 4 Thread: M6 36 Nut Thread: M12 4 6 Formed wire spring 1 66a Washer Designation: DIN 125 A2 4 Internal diameter: 13 Outer diameter: 24 Thickness: 2,5 77 Pump head cover 1 17 Plug 1 - Rubber parts cpl. 1 pcs 25 Priming valve cpl. 1 37 O-ring 2 1 O-ring Diameter: 16,3 2 Material type: EPDM Thickness: 2,4 16 O-ring Diameter: 22, 1 Material type: EPDM Thickness: 2,75 - Documentation / labels 1 pcs 76 Nameplate 1 76a Rivet 2 26 Staybolt Length (mm): 259 4 pcs Thread: M12 55 Sleeve Material type: TITAN 1 pcs Dimension: L=152,6-8 Chamber stack Bearing type: SIC1 1 pcs 3 Intermediate chamber cpl. 1-4 Impeller cpl. 3 Intermediate chamber 1 45 Neck ring 1 65 Retainer for seal ring 1 4a Chamber w. bearing cpl. 1-5a Intermediate chamber 1 Chamber 1 45 Neck ring 1 65 Retainer for seal ring 1 47a Bearing ring, rotating 1 49 Impeller cpl. 5 5a Plate for top chamber 1 51 Shaft cpl. Diameter: M12 1 Length (mm): 259.4 9/1
Pos Description Annotation Données de classification Référence Quantité Unité 61 Spacer for shaft seal 1 64 Spacing pipe Internal diameter: 12,7 3 Outer diameter: 15 Length (mm): 26, 64a Spacing pipe 1 64c Spacing pipe Internal diameter: 12,7 1 Outer diameter: 16,2 Length (mm): 1,5 67 Lock nut Thread: M8 1 67a Split pin Designation: DIN 94 1 Diameter: 2,5 Length (mm): 2 69 Spacing pipe Internal diameter: 12,7 1 Outer diameter: 15 Length (mm): 27, 69 Spacing pipe Internal diameter: Ã 12,7 1 Outer diameter: Ã 15 Length (mm): 1, 15 Shaft seal Material type: AUUE 1 pcs 1/1
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com https://www.lenntech.com tel. +31 152 61 9 fax. +31 152 616 289