ARTILLIAN.COM T E K R M E O T F T Y E L L E PA APPAttLachments GAnRd Other TM EMPOWER YOUR TRACTOR! TM (508) 459-4394
Make itwork for you. Artillian Pallet Fork ystems work seamlessly with John Deere, Kubota and other tractors and skid steers up to 3000 lb lift capacity equipped with a front loader. tart with the Artillian Fork Frame you need and you're ready to move. Compatible with John Deere and kid teer Quick Attach loaders (Kubota, Yanmar and Bobcat) Lifts pallets up to 3000 lbs 3" adjustable fork spacing from 10" to 40" width Chain slots in all four corners to secure loads tart With an ARTILLIAN John Deere Version Fork Frame shown in 3000 lb capacity; 2300 lb also available Lubricious Coating eases adjustment of attachments Class II Receiver built into 3000 lb fork frames Proudly Made in UA kid teer Quick Attach fork frame shown 3000 lb capacity Cascade Fork Tines The lightest fork tines available today! Hammer-forged ITA Class II fixed fork tines, full and standard taper styles Available in 36", 42" or 48" lengths 4" Wide Fork Tines Best for compact tractors 3" tandard Fork Tines Best for sub-compact tractors NOTE: kid teer Pallet Fork Frame fits Universal Quick Attach or kid teer Quick Attach loader meeting the AE J2513 tandard.
Pallet Fork Frame. Why Choose the Artillian Fork Frame ystem? trong yet lightweight; lifts up to 3000 lbs Proprietary design optimizes payload lifting capacity -- providing ideal balance between capacity and strength Versatile -- use for more than just forks Kubota with kid teer Quick Attach hown with 3" wide Fork Tines Optional and Detachable Backrest/Brush Guard Designed to maximize visibility of load afety Guard rises 29" (.75m) above forks Weighs just 23 lbs (10.5 kg) Easily removable when not needed Designed for 500 lb (227 kg) load directly against top edge ARTILLIAN.COM (508) 459-4394
You design it. Customize your Artillian Fork Frame with any combination of Artillian Grapples and Rakes, all compatible with John Deere and kid teer Quick Attach loaders (Kubota, Yanmar, Bobcat etc.) Easily removes brush, debris, and other materials, leaving surface undisturbed Unique sectional Grapple and Rake design allows custom configuration for different tasks Configure Your Grapple and The Artillian Grapple ystem can be used for work above or below grade. Tackle brush, roots, rocks, land-grading and even firewood processing. Use Grapple ections for clamping onto objects. Use Rake ections for widening the Grapple bed or as a standalone rock bucket or rake. You can quickly and easily add and remove Grapple and Rake ections right on your worksite to suit the tasks at hand. tart with Fork Frame (two options) John Deere Fork Frame 2300 or 3000 lb capacity kid teer Universal Quick Attach Fork Frame 3000 lb capacity NOTE: kid teer Pallet Fork Frame fits Universal Quick Attach or kid teer Quick Attach loader meeting the AE J2513 tandard. Rake - Grapple - Rake John Deere Fork Frame Grapple - Grapple kid teer Quick Attach Fork Frame
ake Combination Rake ection Rakes widen the bed of the Grapple or can be used alone as a ground rake, digging tool, rock bucket, brush hauler, excavator/tiller, etc. Grapple ection Each Grapple ection provides up to 1020 lbs of clamping force at the tips. Using multiple Grapples doubles or triples these capabilities Grapple hinges have two settings. One for the widest opening and another for the highest clamping power, depending on the type of work being done Permanently attached fast-action hardware secures Grapple and Rake sections to the pallet fork frame in seconds Made primarily of 3/8" thick ultra-high-strength and wear-resistant steel for many years of durable life Optional Fangs provide even more versatility and holding power Includes everything needed to go to work right out of the box Proudly Made in UA Grapple - Rake - Grapple kid teer Quick Attach Fork Frame Grapple - Grapple - Grapple John Deere Fork Frame Rake - Rake - Rake John Deere Fork Frame ARTILLIAN.COM (508) 459-4394
Add Your Accessory Attachments. 3pt Hitch Attachment Connects 3pt hitch attachments to your front end loader Landscape with your rakes, blades, cultivators, scarifiers, booms, etc. Front Hoe Bucket Does many jobs of rear backhoe for about 1/30 the cost Mounts in four positions (center, offset left, offset right, upside down) Use for transplanting, trenching, etc. Bolt-on End Plates and Debris Guards for the Artillian Grapple and Rakes Improves containment for loose materials, e.g. rocks, leaves, firewood Reduces project clean-up time Class ll Receiver Attachment Attach trailer ball mounts, bale spears, shackles, winches, and many other tools compatible with 2" receiver hitch NOTE: Necessary for 2300 lb Fork Frame NOTE: Rock Bucket ides and the Debris Guards are best used in conjunction, but sold separately John Deere Turf tabilizer Feet Far less turf damage to lawn than OEM backhoe feet Bolt-on Fangs Prevents rotation of objects and secures small objects in the Artillian Grapple Visit ARTILLIAN.com Hydraulic Diverter Kits Add a third hydraulic circuit to your loader for powering our Grapples, Plow Adapters and other attachments Fork & Bucket Cart and Pallet Fork Caster Cart Great way to store and easily move forks around your shop John Deere Ballast Box Trolley For safe mobility around your shop
Horse Blinders Protect eyes against blinding glare Designed to resist damage from bushes, branches, etc. Install in minutes Tractor and kid teer Blades Great for snow removal and general purpose Full power angling casts snow to either side for productive plowing pring trip mechanism and hydraulic relief valve protects both loader and blade from unavoidable surface obstructions Blade Kit includes mount kit, plumbing from relief block to plow piston, and hardware Compatible with most major brand tractors and skid steers with front loader Mounting options include kid teer, Universal Pin, and John Deere Quick Attach 5 through 8 11 gauge moldboard Four heavy duty trip springs Blade markers included Extension Wings for the John Deere 54 Blade Widens the John Deere 54 Blade to 66" covering the tractor footprint John Deere 54 Blade Adapters Quick Hitch & Quick-Tatch TM Hitch/54 Blade Full moldboard trip design Extended 4" push frame Durable powder coat finish Reversible cutting edge Rotating type skid shoes ARTILLIAN.COM (508) 459-4394
Empower Your Tractor at www.artillian.com. Artillian is a U.. manufacturer of attachments for compact and sub-compact tractors, specializing in pallet fork sets and grapple systems. Founded in 2010, Artillian is recognized for exceptional quality, innovative new products and unparalleled customer satisfaction. TM Yanmar is a registered trademark of Yanmar America Corporation. Artillian and Curtis Industries and its products are not endorsed or affiliated with Yanmar America Corporation. Bobcat is a registered trademark of Bobcat Company. Artillian and Curtis Industries and its products are not endorsed or affiliated with Bobcat Company. John Deere is a registered trademarks of Deere & Company. Artillian and Curtis Industries and its products are not endorsed or affiliated with John Deere & Company. Kubota is a registered trademark of Kubota Corporation. Artillian and Curtis Industries and its products are not endorsed or affiliated with Kubota Corporation. Printed in UA 0817 EMPOWER YOUR TRACTOR! A Division of Curtis Industries, LLC ARTILLIAN.COM West Boylston, MA 01583 UA TM ARTILLIAN.COM (508) 459-4394