IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN
Max. flow capacity of 300 3 /hr and ax. discharge head of 98. The world s largest class fluoroplastic agnetic drive pup. The series are the largest class fluoroplastic agnetic drive pups in the world, offering high efficiency and durability for cheical process applications. Using larger otors for even higher output, the series opens up perforance potential in previously unexplored areas. Application exaple Cheical transfer between supply tanks and through cheical process equipent. Cheical recirculation for filtration and heat exchange applications. Scrubber liquid recirculation. Replaceents for conventional sealed pups. 100 1
IWAKI MAGNETIC DRIVE PUMPS High discharge capacity, High head and high efficiency The heavy-duty is capable of a axiu discharge capacity of 300 3 /hr and ax. discharge head of 98, enabling applications in previously unexplored areas with a wide range of liquid specific gravities. Highly cheically resistant Fluoroplastic and fine ceraic wetted parts offer high resistance to virtually every industrial cheical, irrespective of concentration. Robust structure Use of the high strength ductile cast iron external arour is andatory for heavy duty cheical process applications. High casing pressure resistance is achieved with a unique rear casing design preventing stress concentration and incorporating a triple-layer structure (PAT). A special etal shaft is used on the to withstand high radial forces and allow continuous extended operation even under harsh service conditions. Back pullout syste The back pullout syste allows easy aintenance and inspection without reoving pipework. Integrated coponents and a sealed rear casing support structure enable otor reoval safely without cheical leakage. Rear casing support Rear casing ISO copliant The is diensionally copliant with the international standard (ISO2858, 3661) and is interchangeable with conventional sealed centrifugal pups. Perforance curves (Flow range of IWAKI Magnetic drive process pups) 100 50Hz 90 HEAD () 70 60 50 40 30 20 10 MXM MDM MDE 0 5 20 40 60 100 120 140 160 1 200 220 240 260 2 300 320 CAPACITY ( 3 /hr) 2
Construction 1 Front casing 2 Ipeller 8 Gasket 7 Sleeve 3 Rear casing 8 Gasket (Air vent port) 8 Gasket (Drain port) 4 Split plate 9 O ring 6 Bearing 5 Magnet capsule Wet-end aterials Part nuber 1 2 3 4 5 6 7 8 9 Part nae 50, 100 Front casing Ipeller ETFE CFRETFE Rear casing Split plate Magnet capsule Bearing Sleeve Gasket O-ring SiC SiC PTFE Kalrez 3
IWAKI MAGNETIC DRIVE PUMPS Pup identification 100-200 E K Z C 750 I - D 2 Pup size 50: x 50 : 125 x 100: 125 x 100 Noinal ipeller size 170 to 260 Wet-end ain aterial E: ETFE, CFRETFE, P: Motor poles 2: 2P 4: 4P Material of Bearing/Sleeve K: SiC Material of O-ring Z: Kalrez Type of otor C: Foot ounted type otor Motor output to 750: 11kW to 75kW Pup standard I: ISO flange / IEC otor Special version A: Without drain + With base, coupling, coupling cover S: Without drain + With base, coupling, coupling cover + Special version D: With drain + With base, coupling, coupling cover X: With drain + With base, coupling, coupling cover + Special version B: Without drain + Without base, coupling, coupling cover Y: Without drain + Without base, coupling, coupling cover + Special version E: With drain + Without base, coupling, coupling cover Z: With drain + Without base, coupling, coupling cover + Special version Specification Model Pup size Suction X Discharge Noinal Ipeller size Capacity 3 /hr (L/in) Head Motor kw 50 X 50 250 260 50 (833) 25 (417) 2P 21 4P 22, 30, 37, 45, 55, 75 11, 15, 18.5, 22, 30, 37 125 X 250 255 160 (2667) (1333) 2P 23 4P 37, 45, 55, 75 11, 15, 18.5, 22, 30, 37 100 125 X 100 200 235 200 (3333) 100 (1667) 50 2P 21 4P 37, 45, 55, 75 11, 15, 18.5, 22, 30, 37 Coon specification Teperature range of liquid handled Maxiu operating pressure Motor /100: -10 to 105 C, 50: -10 to 120 C 1.6MPa Foot ounted type otor 4
Perforance curves (50Hz) 50Hz 100 90 70 50 (2P) HEAD () 60 50 (2P) 100 (2P) 40 30 20 10 50 (4P) (4P) 100 (4P) 0 0 20 40 60 100 120 140 160 1 200 220 240 260 2 300 320 CAPACITY ( 3 /hr) 5
50 100 n a A b c L d e f g i j h2 h1 H W n W n W h2 h1 H h2 h1 H a b c L a b c L d e f d e f j j g i g i B A B A B 50 100 W 320 400 360 H (405) (505) (4) L (625) (625) (625) A 50 dia. dia. 100 dia. B dia. 125 dia. 125 dia. a 125 125 125 b 500 500 500 c d 370 370 370 e 95 120 120 f 125 160 160 g 150 150 150 h1 1 225 200 h2 225 2 2 i j 14 18 18 n 250 315 2 14 14 14 6 IWAKI MAGNETIC DRIVE PUMPS Diension ()
IWAKI MAGNETIC DRIVE PUMPS IWAKI Process agnetic drive pup series MDE SERIES The ost reliable, large-sized agnetic drive pup designed for process use Specifications Max.discharge capacity: 4.0 3 /in Max.head: 55 Main aterials: ETFE,, SiC Liquid tep. range: 0 to 100 C MDM SERIES Magnetic drive process pups with dry running capability Specifications Max.discharge capacity: 1.4 3 /in Max.head: 74 Main aterials: CFRETFE/ Liquid tep. range: -20 to 105 C(CFRETFE), -20 to 150 C() MXM SERIES Magnetic drive pups with an excellent balance of features and perforance Specifications Max.discharge capacity: 600L/in Max.head: 29 Main aterials: CFRETFE Liquid tep. range: -10 to 105 C https://www.iwaki.es IWAKI Europe Branch Spain, Carretera de l'hospitalet, 147 3a B, 08940 Cornella-Barcelona, Spain TEL: +34-934/741-638 FAX: +34-934/741-638 E-Mail: sales@iwaki.de Caution for safety use: Before use of pup, read instruction anual carefully to use the product correctly. Actual pups ay differ fro the photos. Specifications and diensions are subject to change without prior notice. For further details please contact us. Legal attention related to export. Our products and/or parts of products fall in the category of goods contained in control list of international regie for export control. Please be reinded that export license could be required when products are exported due to export control regulations of countries. CAT-E 0088-02 2013.03.1000.MSN