Miniature Magnetic Latching Key features of the RY2L series include: Standard ice cube, 14-pin solder lug termination Operates by pulse input and maintains condition even during power failure Coils rated for continuous duty xcellent self-holding performance (magnetic latch) Built-in mechanical indicator to show set/reset condition DIN rail, surface, and panel mount sockets available for a wide range of mounting applications Contact Material Silver, gold-plated Contact Resistance Minimum Applicable Load Operating Time 50mΩ or less (initial value) 5V DC, 100mA 30ms or less (AC); 20ms or less (DC) UL Recognized File No. 55996 CSA Certified File No.LR35144 Release Time 30ms or less (AC); 20ms or less (DC) Specifications Maximum Continuous Applied Voltage (AC/DC) at 20 C Set and Reset Voltages (AC/DC) at 20 C Power Consumption Insulation Resistance Dielectric Strength 110% of the rated voltage 80% of the rated voltage Set coil: DC: approximately 1.2W AC: approximately 0.75VA (50Hz); 0.7VA (60Hz) Reset coil: DC: approximately 0.60W AC: approximately 0.35VA 100MΩ minimum Between live and dead parts: 1,500V AC, 1 minute Between contact circuit and operating coil: 1,000V AC, 1 minute Between contact circuits: 1,000V AC, 1 minute Between contacts of same pole: 700V AC, 1 minute Ordering Information Order standard voltages for fastest delivery. Allow extra delivery time for non-standard voltages. Basic Part No. RY2LS-U Coil Voltage: AC120V Response Frequency 1,800 operations/hour Vibration Resistance 60N (0 6G); Maximum frequency 55Hz Shock Resistance 100N or more (10G or more) Life xpectancy lectrical: 200,000 operations Mechanical: 10,000,000 operations Operating Temperature 30 to +70 C Weight 34g (approximately) www.idec.com USA: (800) 262-IDC or (408) 747-0550, Canada (888) 317-IDC -31 Courtesy of Steven ngineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Part Numbers Part Number: Termination Contact Configuration Part No. S: Solder/plug-in DPDT RY2LS-U V: PCB 0.032" (0.8mm) wide DPDT RY2LV-U Ratings Coil Ratings Set Coil Reset Coil Rated Voltage Rated Current ±15% at 20 C Rated Current ±15% at 20 C Coil Resistance ±10% at 20 C Coil Resistance ±10% at 20 C 60Hz 50Hz 60Hz 50Hz 6V 120mA 127mA 14.3Ω 61mA 61.8mA 7.8Ω 12V 60mA 64mA 64.6Ω 30.5mA 31.1mA 34.1Ω AC 24V 30mA 32mA 282Ω 14.2mA 14.4mA 127Ω 120V 6mA 6.3mA 7,480Ω 2.8mA 2.8mA 3,380Ω 6V 200mA 30Ω 100mA 60Ω 12V 100mA 120Ω 51mA 235Ω DC 24V 51mA 470Ω 25.5mA 940Ω 48V 25.5mA 1,880Ω 12.8mA 3,760Ω Contact Ratings Resistive Inductive Voltage Nominal UL CSA Nominal UL CSA 30V DC 3A 3A 3A 1.5A 1.5A 110V DC 0.2A 0.2A 120V AC 3A 3A 3A 1.5A 1.5A 1.5A 240V AC 3A 3A 3A 0.8A 2.Inductive load cos ø = 0.3, L/R = 7ms. Applicable Sockets Part Numbers: Sockets Relay Standard DIN Rail Mount Finger-Safe DIN Rail Mount Panel Mount PC Mount Spring (0ptional) RY2LS SY4S-05 SY4S-05C SY4S-51 1.See Section F for details on sockets. All DIN rail mount sockets shown above can be mounted using DIN rail BNDN1000. SY4S-61 SY4S-62 SFA-101 SFA-202 SFA-301 SFA-302 SY4S-51F1-32 www.idec.com USA: (800) 262-IDC or (408) 747-0550, Canada (888) 317-IDC Courtesy of Steven ngineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Internal Circuits 1 5 4 8 (-) 9 10 11 12(+) 13(-) Set (+) 14 Reset Bottom View Shown in reset (unlatched) position. Dimensions PCB Terminal RY2LV 0.031" (0.8mm) 1.40" (35.9mm) 0.137" or Less (3.5mm) 0.103" (2.64mm) 0.019" (0.5mm) 1.07" (27.5mm) Ø 0.039" (1mm) 10 Holes 0.827" (21.2mm) 0.296" (7.6mm) 0.26" (6.7mm) 0.154" (3.9mm) 0.26" (6.7mm) 0.254" (6.5mm) 0.174" (4.46mm) 3 Places Plug-in RY2LS 0.161" (4.13mm) 0.50" (12.8mm) Total length from panel surface including socket: SY4S-05: 2.42" (62.1mm) maximum; SY4S-51: 1.56" (40mm) Total length from panel surface including hold-down spring: SY4S-02: 2.50" (64.1mm) maximum; SY4S-51: 1.64" (42mm) 0.019" (0.5mm) 1.40" (36mm) or Less 0.103" (2.64mm) 0.214" (5.5mm) Ø 0.119" x 0.047" (3.05 x 1.2mm) Hole 1.07" (27.5mm) 0.827" (21.2mm) 0.133" (3.4mm) 0.28" (7.2mm) 0.764" (19.6mm) 0.52" (13.3mm) Ø 0.195" (5mm) 2 holes 0.646" (16.6mm) 0.148" (3.8mm) www.idec.com USA: (800) 262-IDC or (408) 747-0550, Canada (888) 317-IDC -33 Courtesy of Steven ngineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com