model with1920 ADA ompliant Wall-Mount Fountain and Bottle Filler FATUS & BNFITS ONSTUTION 18-gauge Type 304 stainless steel swirl design bowl, 14-gauge Type 304 stainless steel bracket, and a vandal-resistant bottom plate provides a long lasting unit. BOTTL FILL Vandal-resistant, 14-gauge Type 304 stainless steel bottle filler housing with push button operation using the same all stainless steel valve with front access serviceability used in Haws drinking fountains. PUSH BUTTON VALV The push-button activated valve assembly allows for front access stream adjustment as well as cartridge and strainer access. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). BUBBL HAD Polished chrome-plated brass bubbler head with integral laminar flow prevents splashing while providing a superior flow pattern. The integral basin shank and inserted roll pin add vandal-resistant strength. Shielded, angled stream opening provides a steady, sanitary source of drinking water at.45 gpm. MOUNTING 3/16 (.47 cm) steel mounting plate with supplied mounting hardware for a solid unit base allows for easy installation to a framed wall. (P-trap and stop require rear access). QUALITY ONTOL Both fountain and bottle filler are pre-built and fully water and pressure tested to ensure proper functionality. OPTIONS emote Drinking Fountain Water hiller: Model H8, 8 gph (30.3 L) remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water. Water Filter: Model 6426, 10 x 2 (25.4 x 5.1 cm), in-line lead removal element reduces lead from incoming water supply. Support Frame: Model 6800, universal in-wall mounting support for use with most fountains. Mounting Plate: Model 6700, on-wall mounting plate for 1920 series bottle fillers, single or dual fountain retrofit installations. ustom Logo Panel: Standard Model 6475 comes with Hydration By Haws logo. ustomize the panel with your choice of logo, slogan, or graphic. For customization, call 888-640-4297. MODL HOIS / BP15 / 1920 / BP6 / 6700 Model fountain with stainless steel back panel, bottle filler with stainless steel back plate, and fountain mounting plate. HPS / BP15HPS / 1920HPS / BP6HPS / 6700 Model HPS fountain with high-polish stainless steel back panel, high-polish stainless steel bottle filler and back plate, and fountain mounting plate. SPIFIATIONS Model with 1920: ADA compliant wall-mounted, drinking fountain and bottle filler with push button operation. Fountain shall include an 18-gauge Type 304 Stainless Steel satin finish basin with integral swirl design, vandal-resistant polished chrome-plated brass bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, and 1-1/4 (3.2 cm) O.D. waste pipe. (P-trap and stop require rear access). Fountain and bottle filler use 100% lead-free waterways, push-button operated stainless steel valves with front accessible cartridge and flow adjustment, 14-gauge Type 304 Stainless Steel wall brackets (polished stainless surfaces on model 1011HPS), and vandal-resistant bottom plates. SA certified and ADA accessible, ANSI/NSF 61, Section 9, lead free. 1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com
- - MODL 1920 ADHSIV SID MODL BP15 / BP15HPS MODL BP15 / BP15HPS 8 SPAS (2 P MOUNTING BOLT IF TH MOUNTING PLAT IS INSTALLD BHIND TH FINISHD WALL. US 1 SPA P BOLT FO TOFITS WH TH MOUNTING PLAT IS INSTALLD IN FONT OF TH FINISHD WALL) INSTALLATION OV SINGL FOUNTAIN SHOWN FOM A NOTS: 1. WHN INSTALLING THIS UNIT, LOAL, STAT O FDAL ODS SHOULD B ADHD TO. -MAIL: HAWS@HAWSO.OM WBSIT: WWW.HAWSO.OM N NO. VISD P BY: N: G -20 DAWN: DAT: HK'D.: MODL AND HPS VISION G 05/31/17 WITH MODL 1920 BOTTL FILL 0A.1 SAL: 1:1 DAWING TYP: INSTALLATION SIZ: A SHT 2 OF 2 2017 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation.
- 6700 MOUNTING PLAT (BHIND FINISH WALL) - O - 6700 TOFIT PLAT (ON TOP OF FINISH WALL) 1920/1920HPS BP15/BP15HPS INSTALLATION ABOV HAWS, HPS, * IF YOU FOUNTAIN IS THIS STYL US THS DIMNSIONS 3/8" PUSH IN T (ONNT TO FOUNTAIN SUPPLY) 1. S SPAAT INSTALLATION DAWINGS FO MOUNTING PLATS AND BAKPANLS 2. WHN INSTALLING THIS UNIT, LOAL, STAT O FDAL ODS SHOULD B ADHD TO FO INSTALLATION LOATIONS, WAST & SUPPLY QUIMNTS OTH THAN SHOWN. -MAIL: HAWS@HAWSO.OM WBSIT: WWW.HAWSO.OM N NO. VISD P BY: N: - G -20 DAWN: DAT: HK'D.: MODL AND HPS VISION G 05/31/17 WITH MODL 1920 BOTTL FILL 0A.1 SAL: N/A DAWING TYP: INSTALLATION SIZ: A SHT 1 OF 2 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 1 of 2
1920 MOUNTING HOL LOATIONS NOTS: 1. S SPAT INSTALLATION DAWINGS FO MOUNTING PLATS AND BAKPANLS 2. WHN INSTALLING THIS UNIT, LOAL, STAT O FDAL ODS SHOULD B ADHD TO FO INSTALLATION LOATIONS, WAST & SUPPLY QUIMNTS OTH THAN SHOWN. -MAIL: HAWS@HAWSO.OM WBSIT: WWW.HAWSO.OM N NO. VISD P BY: 5081 N: 5172 MJ DAWN: DAT: HK'D.: MODL 1920/1920HPS/1920W VISION DS 05/25/16 FV 2 FV 02/27/17 SAL: N/A DAWING TYP: INSTALLATION SIZ: A SHT 1 OF 5 2017 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 0510000490.D
H, D H, D F G G F G G F F H D D H FOUNTAIN SID FLOO LIN MODL MTG HOLS "X" DIM TOP VIW AUTION GADING ONT/MASONY WALL MOUNTING: DO NOT SU MOUNTING PLAT TO SAM SID OF WALL AS FOUNTAIN. AVOID OMPOMISING INTGITY OF WALL WHN ANHOING FOUNTAIN. IT IS OMMNDD THAT INSTALL ALL THNIAL SUPPOT IF TH A ANY QUSTIONS AS TO HOW TO OBTAIN A POP ANHO IN ONT/MASONY WALLS. 1-800-766-5612 -MAIL: HAWS@HAWSO.OM WBSIT: WWW.HAWSO.OM N NO. VISD P BY:. N: 5172 FV 0002080016 DAWN: DAT: HK'D.: 6700 DAWING NO. V JL 09/03/03 MOUNTING PLAT, SINGL 0538700 20 FV 02/27/17 SAL: 1/5 DAWING TYP: INSTALLATION SIZ: A SHT 1 OF 2 2017 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation.