Overview Air-cooled units Design The scope of supply of the includes: DRIVE-CLiQ cable for the connection between Active Interface Module and DRIVE-CLiQ cable for the connection between the Control Unit and first Motor Module are used in conjunction with Active Line Modules. contain a Clean Power Filter with basic RI suppression, the pre-charging circuit for the, the line supply voltage sensing circuit and monitoring sensors. The bypass contactor is an integral component in frame sizes FI and GI, thereby making the module very compact. The bypass contactor must be provided separately for frame sizes HI and JI. Line harmonics are largely suppressed by the Clean Power Filter. Active Interface Module chassis format, air-cooled chassis format, liquid-cooled of the s at 400 V or 690 V kw Order No. 6SL3330-7TE3-1AA3 13 6SL3300-7TE3-6AA0 6SL3330-7TE3-6AA3 160 6SL3300-7TE3-6AA0 6SL3330-7TE33-8AA3 35 6SL3300-7TE33-8AA0 6SL3330-7TE35-0AA3 6SL3335-7TE35-0AA3 300 6SL3300-7TE35-0AA0 6SL3330-7TE36-1AA3 380 6SL3300-7TE38-4AA0 6SL3330-7TE37-5AA3 450 6SL3300-7TE38-4AA0 6SL3330-7TE38-4AA3 6SL3335-7TE38-4AA3 500 6SL3300-7TE38-4AA0 6SL3330-7TE41-0AA3 630 6SL3300-7TE41-4AA0 6SL3330-7TE41-AA3 800 6SL3300-7TE41-4AA0 6SL3330-7TE41-4AA3 900 6SL3300-7TE41-4AA0 6SL3330-7TG35-8AA3 6SL3335-7TG35-8AA3 560 6SL3300-7TG35-8AA0 6SL3330-7TG37-4AA3 800 6SL3300-7TG37-4AA0 6SL3330-7TG41-0AA3 1100 6SL3300-7TG41-3AA0 6SL3330-7TG41-3AA3 6SL3335-7TG41-3AA3 1400 6SL3300-7TG41-3AA0 Siemens D 1.3 011 /37
Air-cooled units Technical data 6SL3300-7TE38-4AA0 6SL3300-7TE41-4AA0 at 400 V kw 380 450/500 630 800/900 - Air-cooled 6SL3330-7TE36-1AA3 6SL3330-7TE37-5AA3 6SL3330-7TE38-4AA3 6SL3330-7TE41-0AA3 6SL3330-7TE41-AA3 6SL3330-7TE41-4AA3 - Liquid-cooled 6SL3335-7TE38-4AA3 A 605 840 985 1405 Bypass contactor 3RT1476-6AP36 3WL1110-BB34-4AN-Z C 3WL111-BB34-4AN-Z C 3WL1116-BB34-4AN-Z C Current demand 4 V DC auxiliary power supply A 0.17 0.17 0.17 0.17 30 V AC - Making A 9.9 9.9 10.5 10.5 - Holding A 4.6 4.6 4.9 4.9 DC link capacitance μf 134400 134400 30400 30400 of the drive line-up, max. 1) Power loss, max. ) At 50 Hz 400 V kw 5.5 6.1 7.5 8.5 At 60 Hz 460 V kw 5.5 6.1 7.5 8.5 Cooling air requirement m 3 /s 0.4 0.4 0.4 0.4 Line supply/load connection L1, L, L3/U, V, W 4 hole for M1 4 hole for M1 3 hole for M1 3 hole for M1 Conductor cross-section, max. (IEC) mm 4 40 4 40 6 40 6 40 PE/GND connection M1 nut M1 nut 4 M1 nut 4 M1 nut Conductor cross-section, max. (IEC) mm 40 40 4 40 4 40 Degree of protection IP00 IP00 IP00 IP00 Dimensions Width mm 305 305 505 505 Height mm 1750 1750 1750 1750 Depth mm 544 544 544 544 Weight, approx. kg 390 390 60 60 Frame size HI HI JI JI 1) Information on higher capacities is included in the SINAMICS Low Voltage Engineering Manual. ) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions. Siemens D 1.3 011 /41
Liquid-cooled units s Overview at 400 V or 690 V DC link kw A Order No. 300 549 6SL3335-7TE35-0AA3 500 940 6SL3335-7TE38-4AA3 560 644 6SL3335-7TG35-8AA3 1400 14 6SL3335-7TG41-3AA3 The self-commutated infeed/regenerative feedback units (with IGBTs in infeed and regenerative feedback directions) generate a regulated DC link voltage. This means that the connected Motor Modules are decoupled from the line voltage. Line voltage fluctuations within the permissible supply tolerances have no effect on the motor voltage. If required, the s can also provide reactive power compensation. s are designed for connection to grounded TN/TT and non-grounded IT supply systems. Liquid-cooled s are especially suitable for applications where installation space is restricted and for critical environmental conditions. s are always operated together with the associated. These include the necessary pre-charging circuit as well as a Clean Power Filter. System components such as line reactors,, motor reactors and motor filters are air-cooled. See also selection and ordering data in the section Chassis Format, air-cooled Active Interface Module. Description Accessories for re-ordering Warning labels in 16 languages Using this set of labels, another language can be placed over the German or English labels available as standard. A set of labels is provided with the devices. The following languages are available once in the set of labels: Chinese (simplified), Danish, Finnish, French, Greek, Italian, Japanese, Korean, Dutch, Polish, Portuguese/ Brazilian, Russian, Swedish, Spanish, Czech, Turkish Dust protection blanking plugs (50 units) For DRIVE-CLiQ port Order No. 6SL3166-3AB00-0AA0 6SL3066-4CA00-0AA0 Line-side components as well as recommended system components ( Components). Design The liquid-cooled s have the following interfaces as standard: 1 line supply connection 1 connection for the 4 V DC electronics power supply 1 DC link connection (DCP, DCN) for supplying the connected Motor Modules 3 DRIVE-CLiQ sockets 1 temperature sensor input (KTY84-130, PTC or Pt100) 1 PE/protective conductor connection coolant connections The following are included in the scope of supply of the Active Line Modules: 1 DRIVE-CLiQ cable to connect to the CU30- or SIMOTION D4x5 Control Unit 1 CD-ROM with Manual in PDF format seals for coolant connections Siemens D 1.3 011 /75
Liquid-cooled units s Technical data s 6SL3335-7TE35-0AA3 6SL3335-7TE38-4AA3 For I N DC (50 Hz 400 V) kw 300 500 For I H DC (50 Hz 400 V) kw 70 465 For I N DC (60 Hz 460 V) hp 500 700 For I H DC (60 Hz 460 V) hp 400 700 DC link I N DC A 549 941 Base load I 1) H DC A 489 837 Maximum I max DC A 83 1410 Infeed/regenerative feedback I N E A 490 840 Maximum I max E A 735 160 Current demand 4 V DC auxiliary power supply A 1.5 1.6 DC link capacitance μf 9600 17400 Power loss, at 50 Hz 400 V ) Dissipated to the coolant kw 3.1 5.5 Dissipated to the ambient air kw 0.14 0.3 Total kw 3.4 5.75 Coolant flow rate 3) l/min 1 16 Volume of liquid dm 3 0.91 0.74 in the integrated heat exchanger Pressure drop, typ. 4) Pa 70000 70000 for volumetric flow Heat exchanger material Stainless steel Aluminum Sound pressure level L 5) pa db 5 54 (1 m) at 50/60 Hz Line supply connection U1, V1, W1 Hole for M1 x hole for M1 Conductor cross-section, max. (IEC) mm 40 4 185 DC link connection DCP, DCN hole for M1 Busbar hole for M1 Busbar PE/GND connection hole for M1 hole for M1 Conductor cross-section, max. (IEC) mm 40 4 185 Cable length, max. 6) Shielded m 700 3900 Unshielded m 4050 5850 Degree of protection IP00 IP00 Dimensions Width mm 150 65 Height mm 117 100 Depth mm 545 545 Weight, approx. kg 80 110 Frame size GXL HXL 1) The base load I H DC is the basis for a duty cycle of 150 % for 60 s or I max DC for 5 s with a duty cycle duration of 300 s. ) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions. 3) The value applies to water and a mixture of water and Antifrogen N mixture with 45 % Antifrogen N as coolant. 4) The value is valid for water as coolant. Additional information and notes on other coolants is provided in the SINAMICS Low Voltage Engineering Manual. 5) Total sound pressure level of Active Interface Module and Active Line Module. 6) Sum of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual. Siemens D 1.3 011 /77
System components Line-side components Recommended line-side system components Assignment of line-side power components to air-cooled and liquid-cooled s or, chassis format at 400 V input Bypass contactor or 690 V Active Interface Module kw A 6SL3300-... Order No. 13 10 7TE3-6AA0 6SL3330-7TE3-1AA3 Included in Active Interface Module 160 60 7TE3-6AA0 6SL3330-7TE3-6AA3 Included in Active Interface Module 35 380 7TE33-8AA0 6SL3330-7TE33-8AA3 Included in Active Interface Module 300 490 7TE35-0AA0 6SL3330-7TE35-0AA3 Included in Active Interface Module 6SL3335-7TE35-0AA3 380 605 7TE38-4AA0 6SL3330-7TE36-1AA3 3RT1476-6AP36 500 840 7TE38-4AA0 6SL3330-7TE38-4AA3 6SL3335-7TE38-4AA3 3WL1110-BB34-4AN-Z C 630 985 7TE41-4AA0 6SL3330-7TE41-0AA3 3WL111-BB34-4AN-Z C 900 1405 7TE41-4AA0 6SL3330-7TE41-4AA3 3WL1116-BB34-4AN-Z C Line voltage 500 690 V 3 AC 560 575 7TG35-8AA0 6SL3330-7TG35-8AA3 3RT1476-6AP36 6SL3335-7TG35-8AA3 800 735 7TG37-4AA0 6SL3330-7TG37-4AA3 3RT1476-6AP36 1100 105 7TG41-3AA0 6SL3330-7TG41-0AA3 3WL11-4BB34-4AN-Z C 1400 170 7TG41-3AA0 6SL3330-7TG41-3AA3 6SL3335-7TG41-3AA3 3WL116-4BB34-4AN-Z C power at 400 V or 690 V input Active Interface Module 1) Liquid-cooled version, 6SL3335-... Active Line Module Switch disconnector without handle and shaft Switch disconnector with handle and shaft Cable protection fuse Cable protection fuse incl. semiconductor protection kw A 6SL3300-... 6SL3330-... 6SL3335-... Order No. Order No. Order No. A Order No. A Line voltage 380... 480 V 3 AC 13 10 7TE3-6AA0 7TE3-1AA3 3KL5530-1AB01 3KL5530-1GB01 3NA35 315 3NE130-315 160 60 7TE3-6AA0 7TE3-6AA3 3KL5730-1AB01 3KL5730-1GB01 3NA354 355 3NE1331-350 35 380 7TE33-8AA0 7TE33-8AA3 3KL5730-1AB01 3KL5730-1GB01 3NA3365 500 3NE1334-500 300 490 7TE35-0AA0 7TE35-0AA3 3KL6130-1AB0 3KL6130-1GB0 3NA337 630 3NE1436-630 7TE35-0AA3 1) 380 605 7TE38-4AA0 7TE36-1AA3 3KL630-1AB0 3KL630-1GB0 3NA3475 800 3NE1438-800 500 840 7TE38-4AA0 7TE38-4AA3 7TE38-4AA3 1) 3NA336 ( units) 630 985 7TE41-4AA0 7TE41-0AA3 3NA3365 ( units) 900 1405 7TE41-4AA0 7TE41-4AA3 3NA3365 45 3NE1334- ( units) 500 3NE1436- ( units) 3 500 3NE1448-560 575 7TG35-8AA0 7TG35-8AA3 315 3NE1447-670 7TG35-8AA3 1) 3KL6130-1AB0 3KL6130-1GB0 3NA335-6 ( units) 800 735 7TG37-4AA0 7TG37-4AA3 3KL630-1AB0 3KL630-1GB0 3NA3360-6 ( units) 400 3NE1448-850 1100 105 7TG41-3AA0 7TG41-0AA3 3NA3354-6 3 355 3NE1436- ( units) 1400 170 7TG41-3AA0 7TG41-3AA3 3NA3365-6 3 500 3NE1438-7TG41-3AA3 1) ( units) 500 630 850 630 800 /100 Siemens D 1.3 011