96 Pressure Switches Electronic Pressure Switches Electronic
Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure protection (up to x) Small, compact electronic switches Broad diversity of electronic and mechanical connection options Ceramic sensor in thick film technology Monitoring of a pressure range due to window function Hysteresis adjustable within a wide range ( % 98 %, set at factory) High level of adaptability to your requirements (custom solutions) 06
Electronic pressure switches, series Technical details Type: Transistor output: Supply voltage: Output current: Idle power consumption: 0500 NO 050 NC PNP output (High-Side N-channel) 9.6 3 VDC with reverse voltage protection 0.5 A with short-circuit and overvoltage protection < 30 ma Adjustment range p nom : 0 bar 0 4 bar 0 0 bar 0 6 bar 0 40 bar 0 00 bar Max. overpressure ) : 4 bar 0 bar 0 bar 40 bar 00 bar 50 bar Burst pressure ) : 8 bar 0 bar 35 bar 60 bar 40 bar 300 bar Mechanical life expectancy: Pressure rise: Accuracy: Switching point adjustment range: 5,000,000 pulsations at rise rates to bar/ms at p nom bar/ms ±0.5 % of adjustment range p nom (full scale (FS)) at room temperature 3 00 % of adjustment range p nom (FS), set at factory Hysteresis ) : 98 % FS, programmable at factory (max. tolerance ±.0% of adjustment range p nom ) Default-Hysteresis without order specification: Operating mode: Resolution: Long term stability: Repeatability 3) : Switching time: Switch-on / -off delay: 0. % of adjustment range p nom (FS) ±0. % of adjustment range p nom (FS) per year ±0. % of adjustment range p nom (FS) < 4 ms Adjustable between 0 and s (please specify when ordering, otherwise default 0 s is set) Temperature error 3) : ±0.04 % of adjustment range p nom (FS) / C Compensated temperature range: 0 C +70 C (3 F 58 F), total error % Temperature range ambient: -30 C +00 C (- F F) with T seal: -30 C +0 C (- F +30 F) Temperature range media: with NBR seal: -30 C +00 C (- F + F) with EPDM seal: -30 C +5 C (- F +57 F) Wetted parts material with FKM seal: -0 C +5 C (-4 F +57 F) Housing: Stainess steel (.4305 / AISI 303) Messuring cell: Seal material: Ceramic T, NBR, EPDM or FKM Insulation resistance: > 00 MΩ (500 VDC, Ri > 4 Ω) Vibration resistance: 0 g; at 4 000 Hz sine wave, DIN EN 60068--6 Shock resistance: 500 m/s², ms half sine wave; DIN EN 60068--7 Protection class: IP65: DIN EN 7530-803-A : Mx, AMP-Superseal, cable connector and IP6K9K: Bayonet ISO 570-A-4., Deutsch DT04-3P Electromagnetic compatibility: EMV 04/30/EU, EN 6000-6-:005, EN 6000-6-3:007 Cable output thread size: bar 4 bar 0 bar 6 bar 40 bar 00 bar 0. bar 0. bar 0.5 bar 0.8 bar bar 5 bar with hysteresis or window function (see page 0), programmable at factory For DIN EN 7530: Pg9 (outside diameter of cable 6 to 9 mm) Weight: approx. 80 g (DIN EN 7530 approx. 0 g) 0 50 bar 375 bar 500 bar 50 bar 0 bar ) Static pressure, dynamic pressure 30 to 50 % lower. Values refer to the hydraulic or pneumatic part of the electronic pressure switch. ) 3... 98 % with programming device PPD05 (see page 33). 3) Within the compensated temperature range. E 07
0500 / 050 Electrical connectors and threads DIN EN 7530-803-A M DIN EN 6076--0 A ISO 570-A-4. 4 3 3 4 3 x Uv+ Gnd Uv+ nc Uv+ Gnd 3 U out IP65 3 Gnd 4 U out 3 U Out 4 nc, IP6K9K x ~ 60 mm without coupler socket x ~ 77 mm with coupler socket x ~ 54 mm x ~ 56 mm Order number: 03 Order number: 00 Order number: 004 AMP Superseal.5 3 Deutsch DT04-3P Cable connection B A NO / NC 3 (Uv+) (Gnd) (U out ) C U out A Uv+ red Uv+ Gnd B Gnd white U out 3 Uv+ C U out black Gnd, IP6K9K x ~ 6 mm Order number: 007 x ~ 6 mm Order number: 00 x ~ 47 mm (+ 5 mm bend relief ) Cable length ~ m Order number: 0 Sealing ring G /4 DIN EN ISO 79- (DIN 385-) form E 4 NPT /4 08 RoHS II compliant Thread code: 4 Thread code: 09
0500 / 050 Order matrix for electronic pressure switches Type Adjustment range Pressure connection Seal material Electrical connection Type Normally open (NO), PNP, switching points programmed 0500 at factory ) Normally closed (NC), PNP, switching points programmed 050 at factory ) Max. overpressure ) Burst pressure Adjustment range ) 0 - bar (approx. 9 PSI) 4 bar 8 bar 00 0 bar 0 bar 0-4 bar (approx. 58 PSI) 400 0 bar 35 bar 0-0 bar (approx.45 PSI) 0 40 bar 60 bar 0-6 bar (approx. 30 PSI) 6 00 bar 40 bar 0-40 bar (approx. 580 PSI) 40 50 bar 300 bar 0-00 bar (approx.,450 PSI) 0 375 bar 500 bar 0-50 bar (approx. 3,65 PSI) 5 Pressure connection G /4 DIN EN ISO 79- (DIN 385-), form E 4 NPT /4 09 E Seal material Application areas NBR Hydraulic/machine oil, heating oil, air, nitrogen, etc. EPDM Brake fluid, water, acetylene, hydrogen etc. FKM Hydraulic fluids (HFA, HFB, HFD), petrol/gasoline etc. 3 T Hydraulic/machine oil, air, nitrogen, water, acetylene etc. 7 Electrical connection DIN EN 7530-803-A (DIN 43650-A); socket device included 03 M x - DIN EN 6076--0-A 00 Bayonet ISO 570-A-4. (DIN 7585-A-4.) 004 AMP Superseal.5 007 Deutsch DT04-3P 00 Cable connection (length of cable m standard) 0 Order number: 05XX XXX XX X XXX RoHS II ) Please state switching point and hysteresis when ordering. konform 09 ) Static pressure, dynamic pressure 30 to 50 % lower. Values refer to the hydraulic or pneumatic part of the electronic pressure switch.