POWER Inverters
+1 305 505 5586 Power Inverter A Series Nexen Energy have brought together the latest in engineering and manufacturing process of advanced DC to AC power electronic products. Our Power Inverters are an All-In-One Power package designed for multiple applications. Features 12v, 24v and 48v Low Frequency Inverters 120vac /240vac Split Phase Current 10msec Automatic Transfer Switch State-of-Art Auto Load Sense & Power Saver Pure Sinewave Output Current Multi Stage Smart Integrated Battery Charger Built-In LED Monitor Display Applications Solar Renewable Energy Requirements DC Power Source Usage Alternative Uniteruptable Power Supply Solution House Energy Source and Backup Business Energy Source and Backup Vehicles with AC Energy Requirements
A Series Power Inverters Direct Connect Terminal Block Allows a 300 percent surge capacity for up to 20 seconds Pure Sine Wave Output Effectively run sensitive equipments Conformal-Coated Boards Allows this inverter great for mobile applications Built-In Transfer and Charger Built in smart battery charger of 65 amps and automatic transfer switch of 80 amps Low Frequency Low Level harmonic distortion DC to AC inversion process AGS - Automatic Generator Start Bulit-In Automatic Generator Start function for a complete backup solution. Key Features Inverter High overload ability up to 300% rated power (20 sec) Low voltage trip selectable (9.5V/10V or 10V/10.5V) e Power saver to 10W (3 sec sensing cycle)/3w (30s sensing cycle) DC13V battery recover point, dedicated for solar system Transfer 10ms typical transfer time between battery and AC 15s delay before transfer when AC resumes for extra protection Input AC voltage range selectable (184-253V or 154-253V) 30/40A Through Current Ability Allows start up and through power with depleted batteries Charger 3 step intelligent battery charging (bulk, absorption, and float) 8 pre set battery type (Flooded, Gel, AGM) Battery Selector Powerful charge rate up to 90A, selectable from 0-100% PFC (Power Factor Correction) Technology for less power usage Controls Switch the unit on/off, select/deselect power saver mode 17 alarms/warnings for easier operation and trouble-shooting Front panel LED indicators and adjustable switch selectors Battery/AC priority switch available for off grid solar application Low/high battery, overload, over temperature protection circuitry RS232/USB communication port available Generator compatible All-In-One Our inverter is a 3 products in one: It is an inverter that converts 12,24 and 48V DC (direct current) power into 120V AC (alternating current) electricity to power tools and appliances. With a built-in transfer switch that will automatically switch between shore power and battery-bank power within 10 mili seconds on a backup appliation. An AC-to-DC battery converter charger uses AC power from the grid or from a generator to recharge a battery bank.the battery-type selector on the top of the inverter charger allows the ability to adjust the charging voltage to the battery bank.
Technical Specifications General specifications: Input wave form: APC PRODUCT RANGE Sine wave (Utility or generator) Nominal voltage: Low voltage trip: Low voltage re engage: High voltage trip: High voltage re engage: Max input AC voltage: 120VAC 90V+/-4% 100V+/-4% 140V+/-4% 135V+/-4% 150VAC 230VAC 184V/154V+/-4% 196V/164+/-4% 253V+/-4% 243V+/-4% 270VAC Nominal input frequency: Low frequency trip: High frequency trip: Output wave form: Overload protection: Short circuit protection: Transfer switch rating: Efficiency on line transfer mode: Line transfer time: Bypass without battery connected: Max bypass current: Bypass over load current: 50Hz or 60Hz(Auto detect) 47Hz for 50Hz, 57Hz for 60Hz 55Hz for 50Hz, 65Hz for 60Hz (Bypass mode) same as input Circuit breaker Circuit breaker 30 amp or 40 amp 95%+ 10 ms typical Yes 30 amp or 40 amp 35 amp or 45 amp: alarm Inverter specification/output Output wave form: Pure sine wave or quasi sine wave Output continuous power watts: 1000 2000 3000 4000 5000 6000 Output continuous power VA: 1000 2000 3000 4000 5000 6000 Power factor: Nominal output voltage rms: Output voltage regulation: Output frequency: Nominal efficiency: 0.9-1.0 120/230VAC +-/10% rms 50Hz+/-0.3Hz or 60Hz+/-0.3Hz >88% Surge ratings: 3000 6000 9000 12000 15000 18000 Short circuit protection: Yes, fault after 10 secs Inverter specification/input: Nominal input voltage: Minimum start voltage: Low battery alarm: Low battery trip: High voltage alarm: Power saver: Power saver: 12V 24V 48V 10V 20V 40V 10.5V 21V 42V 10V 20V 40V 16V 32V 64V Below 25 watts when enabled() Same switched on/off on remote Charger mode specifications: Input voltage range: Output voltage: Charger current: Battery initial voltage for start up: Over charger protection shutdown: 95-127VAC 194-243VAC/164-243VAC(W) Dependent on battery type 35A/70A 0-15.7V for 12V(*2 for 24V; *4 for 48V) 15.7V for 12V(*2 for 24V; *4 for 48V) Nexen LLC Sales & Service +1 305 505 5586
NEXENERGY GREEN SOLUTIONS ENJOY THE SUNNY SIDE OF OUR SOLUTIONS SWITCH YOUR ENERGY NEEDS TO EFFICIENT RENEWABLE TECHNOLOGIES. FROM STORED ENERGY TO ENERGY GENERATION, WE'VE GOT YOU COVERED. Nexen LLC T. +1 (305) 505 5586