PRODUCT OVERVIEW Baldor s mission is to be the best (as determined by our customers) marketers, designers and manufacturers
Motors General Purpose TEFC 1/12 Hp thru 600 Hp stock, to 800 Hp custom Enclosures: TEFC and TENV Single Phase Single Phase 1/12 thru 15 Hp stock Enclosures TEFC, TENV and ODP Foot or face mount General Purpose ODP 1/12 Hp thru 600 Hp stock, to 1500 Hp custom Enclosures: ODP, WPI, WPII 50 Hertz 1/3 thru 60 Hp stock, custom to 1250 Hp Enclosures: TEFC, ODP and Explosion Proof Foot and face mount NEMA or IEC Mounting Two Speed 1/12 Hp thru 25 Hp stock, 1000 Hp custom Enclosures: TEFC, OPEN and OPSB C-Face and D-Flange C-Face motors from stock in most all configurations and product families D-Flange motors are as custom items or through Mod Express NEMA or IEC style Woodworking/Arbor Saw Low Profile Supplied with keyway and non threaded shaft Custom shaft threading thru Mod Express Double row ball bearings for maximum shaft stability 7-1/2 thru 15 Hp stocked Farm Duty 1/3 Hp thru 30 Hp Epoxy finish Inverter Duty 1/3 Hp thru 200 Hp stock, custom to 800 Hp Enclosures: TEBC, TENV and TEFC Stocked as Washdown, Paint Free, All Stainless and Explosion Proof Inverter Gear Motors also Commercial Duty SmartMotor 1/4 Hp thru 3 Hp Enclosures: ODP and TEAO Vector Duty 1/3 Hp thru 500 Hp stock, custom to 800 Hp Enclosures: TEBC and TENV Stocked with foot and face mount to 256TC frame Includes mounted 1024 PPR optical encoder and Milspec-style connector 1-10 Hp Washdown duty stocked 230 or 460 volts 1 thru 10 Hp stock TEFC Enclosure: C-Face with base Optional 32 character operator keypad and cable
Motors Direct Current Motors and Drives F2 Mount Enclosures: TEFC and ODP 1 Hp thru 60 Hp stocked Super-E Cast Iron TEFC 15 Hp thru 30 Hp in stock F2 mount on other sizes through Mod Express Quarry/ Crusher Duty 1 thru 15 Hp Quarry Duty Design C in stock 100 thru 300 Hp Crusher Duty stocked with roller bearing for heavy belted loads Automotive Duty TEFC, U-Frame 1/4 Hp thru 100 Hp Epoxy Finish GM7EQ Approved High Efficiency Low Noise Levels Brake Motors 1/4 Hp thru 30 Hp stock, larger as custom Standard and Super Efficient Enclosures: ODP, TEFC, TENV and Explosion Proof Washdown Super-E 1/2 thru 5 Hp Design D Oil Field Pump 2 thru 150 Hp stock Enclosure: TEFC and ODP 230/460/796 12-lead or 460/796 6-lead High slip Design D winding IEC Frame Metric DC Drive 18 thru 30 kw stock, 1100 kw custom Enclosures: TEFC F2 mounted Conduit box B3 foot, B5 flange or B14 face mount 50 or 60 Hz Permanent Magnet DC SCR-rated 90 or 180 volt 1/50-5 Hp stocked Enclosures: TENV and TEFC C-Face with base Tach Adaptable Explosion proof in stock 1/4 thru 1.5 Hp Integral tach in stock 1/4 thru 5 Hp Wound Field DC SCR-rated 90, 180, 240 or 500 volt 1/4 thru 500 Hp stocked Enclosures: TENV, TEFC, DPFG, DPBV, TEUC and TEAO C-Face with base thru 10 Hp in stock Tach adaptable Explosion proof thru 3 Hp in stock Low Voltage and DC Power 12 and 24 volt permanent magnet, 1/4 thru 1 Hp stocked 115 and 230 volt compound wound power motors stocked 1/3 thru 1.5 Hp, custom to 500 Hp Enclosure: TENV and TEFC Base mounted Lifting Magnet Generators 230 volt, three phase compound wound with drooping voltage characteristic 5 thru 40 kw stocked, custom to 100 kw Heavy steel frame with cast iron endplates Choice of foot or foot with face mount Tachometers/Feedback Devices 50 or 100 volt/1000 RPM DC tachs in choice of: PY flange or base mount, XC42 or 46 foot and face 8.5 rabbet pancake style AC or DC output PY flange encoder Hollow shaft encoders and pulse generators DC SCR Drive 230 Volt 5 thru 300 Hp 460 Volt 5 thru 600 Hp 240 or 500 Armature Volts DC Motor Field Supply One Way or Line Regenerative Armature or Motor Feedback 115 Volt 1/100 thru 2 Hp
Capabilities Stock Availability Baldor maintains the largest inventory of stock motors, drives, gear products and generators in the industry 36 distribution centers in the US and Canada Over 6500 items for immediate shipment Custom Capabilities Custom motor lead-time in two weeks on existing designs Special electrical and mechanical designs suited to OEM needs Mod Express Mod Express performs simple modifications to stock product to allow shipment in 2-3 days Modification changes include: mounting, enclosures, shaft, space heaters, drains, seals and weatherproofing Grinders, Buffers and Lathes Grinders Bench and Tool Grinders Industrial Quality Continuous Duty 6 through 14 wheels Pedestals and other accessories Buffers Cotton wheel buffing Extra long double shafts Fractional through 7.5 Hp Portable Generators Industrial portables range from 1,100 to 11,000 watts Gasoline, multi-fuel and diesel designs Available features include: Focal Vibration System, Auto Idler, Switchless Full Power Towables & Light Towers Ratings from 25KVA to 250KVA Available with or without trailer Diesel engines Mobile Light Towers - 6000 watt - (4) 1000 Watt Halide Bulbs - 30 ft. Mast Industrial Prime/Standby Diesel Ratings from 20 kw to 2000 KW LP and Nat. Gas to 880 kw Engines include: GM, John Deere, Detroit, Mitsubishi Prime Power, Commercial standby, Peak shaving Super-E Explosion Proof 1 Hp thru 60 Hp stock, to 300 Hp custom Class 1 Group C & D, Class II Group F & G U.L. approved cast conduit box standard Low voltage Explosion Proof 1/4 Hp thru 300 Hp stock Class I Group C & D; Class II Group F & G Corrosion resistant epoxy finish U.L. approved cast conduit box included Dental/Polishing Lathes Explosion Proof - 1.15 SF Can be used for Dental, Jewelry and Lapidary applications Single and two speed models Generators Explosion Proof Motors 2 Hp thru 100 Hp stock Class I Group C & D only, T3C Corrosion resistant epoxy finish U.L. approved cast conduit box included Labyrith-type recessed slinger & XP breather/drain 230/460 and 575 Volt in stock
Washdown Duty Motors Washdown Duty 1/2 Hp thru 20 Hp stock Base mount, C-Face with or without base or JM pump shaft Available with BISSC approval Standard and Super-E efficiency IEC Ratings Available Paint-Free Washdown Duty 1/2 Hp thru 10 Hp stock C-Face with or without base Labyrinth seals Standard and Super-E efficiency IEC Ratings Available All-Stainless Washdown Duty 1/2 Hp thru 10 Hp stock C-Face with or without base Labyrinth seals Standard and Super-E efficiency IEC Ratings Available Premium Efficient Super-E Motors Totally Enclosed Fan Cooled 1 Hp thru 500 Hp Stock, to 800 Hp custom Enclosures: TEFC Super-E Open Drip Proof 1 Hp thru 300 Hp stock, to 1500 Hp custom Enclosures: ODTF, OPEN, OPSB, WPI and WPII Super-E Single Phase Single Phase 1/4 Hp thru 5 Hp stock, to 15 Hp custom Enclosures: TEFC and ODP Foot or face mount Dirty Duty Washdown 1/2 Hp thru 10 Hp stock C-Face with or without base Weatherproof per IEEE 45 and USCG 259 for below deck use Standard efficiency Inverter/Vector Duty Washdown 230/460 volts Inverter Washdown, 1 thru 10 Hp stock Inverter Paint Free, 1 thru 10 Hp stock Vector Washdown, 1 thru 10 Hp stock Enclosure: TENV and TEFC C-Face with base PMDC Washdown SCR-rated 90 and 180 volt 1/4 thru 5 Hp in stock Enclosure: TENV and TEFC C-Face with foot Paint Free Washdown in stock 1/4 thru 1 Hp Super-E Brake Motors 1 Hp thru 30 Hp stock brake connection NEMA standard BA dimension Easily convertible to C-Face HVAC Motors HVAC 1/4 Hp thru 75 Hp Enclosures: OPAO, TEAO TEFC and OPEN Chiller/Cooling Tower Corrosion Resistant Epoxy Finish Double sealed Bearings with Inpro/Seal Stainless Steel Nameplate Corrosion Resistant Hardware Designed for high humidity environment 5 Hp-7 Hp in stock
Severe Duty Motors Super-E Severe Duty 1 Hp thru 500 Hp stock, to 800 Hp custom Foot and face mount including 575V Super-E Severe Duty IEEE 841 1 Hp thru 250 Hp stock, to 800 Hp custom Exceeds the IEEE 841-2001 standards for severe duty TEFC induction motors InproSeal on fan & drive end shafts Dirty Duty 1 Hp thru 20 Hp stock Foot and face mount Corrosion-resistant epoxy finish Washdown Dirty Duty Large Frame Motors TEFC Above NEMA Low and Medium Voltage 250-500 Hp stock to 800 Hp custom Severe Duty and IEEE 841 Sleeve bearings Standard aluminum and copper bar rotor designs WPI - WPII Low and Medium Voltage through 600 Hp Stock to 1500 Hp Custom Sleeve bearings Super-E NEMA Premium efficiency Standard aluminum and copper bar rotor designs Gear Products Subfractional Gearmotors AC and DC ratings Right Angle and Parallel Shaft 1/50 through 1/2 Hp Enclosures: TENV and TEFC Pump Motors Super-E Pump Motors 1 Hp thru 50 Hp stock, to 250 Hp custom Enclosures: TEFC and ODP JM, JP and West Coast Shafts Pump Motors 1/4 Hp thru 125 Hp Enclosures: ODP, OPEN, OPSB, TENV and XPFC 56J, JM, JP and West Coast Shafts P-Base Motors 1/4 Hp thru 75 Hp stocked Enclosures: OPEN and TEFC Normal, medium and high thrust designs Standard and Super Efficiencies Gears Single and Double reductions from 5:1 to 3600:1 Output ratings to 9000 in-lbs. Right angle, parallel shaft and ratio multipliers Optional mounting bases and accessories Available in Washdown Duty and Stainless Washdown Inverter Gearmotors 230 volt 3/8 Hp inverter gearmotors Right angle 490 RPM @ 68 in-lb thru 33 RPM @ 315 in-lb Parallel shaft 490 RPM @ 58 in-lb thru 82 RPM @ 350 in-lb Soft Start Digital and Solid State Controls Single Phase Starters Starters Torque Controls Electronic Brake 115, 230, 460 & 575 Volt units Ratings of 1/4 thru 800 Hp Control & Combination Starters
Drives H2 Drives Inverter, Encloderless Vector, Vector Drive and AC Servo 230 Volt 3/4 thru 60 Hp 460 Volt 3/4 thru 150 Hp 575 Volt 3/4 thru 150 Hp Graphical Operator Display PID Process Control Loop Ethernet Connection option H Series Drives Inverter, Vector Drives and AC Servo versions 230 Volt 3/4 thru 60 Hp 460 Volt 3/4 thru 1500 Hp 575 Volt 3/4 thru 1500 Hp Line Regenerative versions PID Process Control Loop Washdown Enclosures Mini Inverter Drives 230 Volt 1/3 thru 5 Hp 460 Volt 1 thru 7.5 Hp Simple Potentiometer or Fully Programmable Operator Display Heavy Duty Industrial Ratings Dynamic Braking Option NEMA 1 Enclosures Micro Inverter Drives 115 Volts 1/2 thru 2 Hp 230 Volts 1/2 thru 2 Hp Chassis Mount or NEMA 4 Enclosures Potentiometer Operator Control Start/Stop Command Auto or Manual restart Pre-Engineered Panel Inverter, Encoderless Vector and Vector Drives Open Panel, NEMA 1 or NEMA 12 Keypad, 2-Wire or 3-Wire control operation Control Bypass Option Line Disconnect Option Line Reactor & Load Reactor Option Custom Configurations Three Phase AC Reactors Usable as Input Line Reactors and Output Load Reactors Stock ratings for 3% Impedance 60 Hz ratings of 208/230, 460 and 575 Volts 50 Hz ratings of 208/240 and 380/400/415 Volts Optional NEMA 1 Enclosures Motion Control and Linear Products AC Servo Motors Peak torques over 1500 lb-in (170 Nm) Standard or low inertia Potted stator - superior protection for high voltage and current spikes Premium 200 C moisture resistant, multi-coated wire Stainless steel IP67 enclosures DC Servo Motors Peak torques to 283 lb-in (32 N-m) High continuous 155 C operating design Optimized long life copper-graphite brushes Premium 200 C moisture resistant, multi-coated wire Variety of feedback devices Linear Motors Very high acceleration - up to 10 g s (9.8 m/s 2 ) High speeds to 320 in/sec (8 m/s) High peak forces to 3100 lbs (13,800 N) Extremely low backlash, high stiffness Positioning to 50 nm Servo Drives Operate either rotary or linear brushless servo motors PC or Keypad setup 115/230/460V models - continuous to 54 amps Full auto-tuning wizard - current velocity & position Programmable Device Net, ProfibusDP, CANopen, Ethernet Motion Control Multi-axis control Digital and Analog I/O Available in PCI format or standalone units with USB and serial interfaces Program via Baldor s MintMT (Multi-Tasking), embedded C or ActiveX Device Net, ProfibusDP, CANopen, Ethernet Baldor s MintMT Software High speed compiled Basic programming language for motion and machine control Multi-tasking capability for motion, I/O, HMI and communication tasks Modular programming capability