System User Interface

System User Interface

System UI Configurations Run Screen Items Tools Setup Items Auxiliary Inputs Calibrations

Configuration Flexibility

Machine support Supports up to two base machine configurations Each base configuration supports a machine type of: Sprayer Liquid Fertilizer Toolbar Anhydrous Ammonia Toolbar User Interface and functionality is specific to machine type

Profiles Each base machine can support up to four profiles Allow for machines that have multiple boom setups Examples: 90 /120 roll over booms Nozzles on 20 center, drops on 30

Machine Dependent UI Sprayer Particle size monitoring Min/Max pressure warnings Solution pump speed monitoring Spray nozzles support Predefined ISOBUS nozzles Up to 50 custom nozzles Nh3 toolbar Liquid/Vapor state monitoring Nh3 temperature monitoring Container fills/edits by tank %

Run Screen Content GUI boom state to show Switch on, section spraying Switch on, section off by AutoSwath Switch off GUI container level Fluid level changes as container empties Color changes when countdown threshold is reached

Sprayer Run Screen GUI pressure gauge with integrated droplet size monitor Configurable pressure gauge range to make specific to current spray activity GUI display of spray nozzle in use Quick access to: Nozzle configuration Controller settings System diagnostics

Run Screen Items

Density Conversion

Target Rate

Ground Speed

Actual Rate

Container Settings

Nozzle Settings

Pressure Settings

Totals

Tools

Tools Boom Prime Allows operator to set a prime pressure and easily prime the boom to the set pressure Maintains the prime pressure when all sections are off Requirements Pressure sensor must be installed and calibrated If a pressure sensor is not being used the system still has PWM Standby Used for PWM Control Valve types only

Tools Nh3 Tube Check Allows the operator to check for plugged knives with the toolbar raised Requirements Operator has to accept a warning Section valve switches must be turned on Operator has to hold the tube check button Section valves open and control valve increments open to start dispensing product When operator releases button valves close

Setup Items

Manage Profiles

Manage Nozzles

Servo Control Valve

PWM Control Valve

PWM Settings Tool

Look Aheads

Alarm Settings

System Settings

Nozzle Attribute Setup

Particle Size Classification

Pressure Gauge for AI11004

Auxiliary Input Setup

Switch Assignments

Calibrations

Calibrations All calibrations have been removed from the configuration A single menu to access for all calibrations Pressure (Up to 3 sensors) Flow Meter Pump Speed Ground Speed

Pressure Sensor Calibrations

Pressure Sensor Manual Calibration Manually Enter mv/bar or Use Calculator

Multiple Set Point

Flow Meter Calibrations

Manual Calibration Manual Calibration Manually Enter pulses/liter

Static Dispense Volume

Field Dispense Volume

Nozzle Catch Method

Pump Sensor Calibration

Pump Sensor Calibration Manually enter number of pulses/revolution of the pump speed sensor

Ground Speed Calibration

Ground Speed Sensor Manual Calibration Manually Enter Pulses/Meter Distance Calibration

Task Controller

AGL Task Controller Task Controller allows the following: Integration with the Display s map screen Automatic Swath Control Prescription Rate Control Data logging to the.agdata file Display handles products/mixes

Questions