TIMEPIECES USER MANUAL

TIMEPIECES USER MANUAL

Table of Contents Two Year Limited Warranty... 4 General Information: Water Resistance.... 6 Screw Down Crowns.... 7 Watches without a Calendar: Two Hand /Three Hand Models... 8 Watches with a Calendar: Two Hand /Three Hand Models... 9 Multi-Function Models: Two-Eye Multi-Function Models... 11 Three-Eye Multi-Function Models... 13 Chronograph Models: Eyes at 12:00, 6:00, 9:00/Date at 3:00.. 15 Eyes at 2:00, 6:00, 10:00/Date at 4:00.. 19 Eyes at 3:00, 6:00, 9:00/No Date... 22 Eyes at 3:00, 6:00, 9:00/Date at 4:00... 25 Three-Eye Chronograph/Dual Time... 28 Warranty Certificate... 33 2

Congratulations on your Tommy Bahama Timepiece purchase. Tommy Bahama, the purveyor of island lifestyles, bears witness to the perfection of timepiece making. Imposing a distinctive style that is always in pace with the philosophy to make life one long weekend.

TWO YEAR LIMITED WARRANTY Tommy Bahama timepieces carry a two (2) year warranty from the date of purchase by the original consumer. The warranty covers defects in materials and workmanship under normal use. This warranty does not include wear of the strap, bracelet, case, and crystal, or any timepiece that has undergone alteration of those parts. The warranty is void if the timepiece has been damaged by accident, negligence, unauthorized service, or other factors not due to defects in materials or workmanship. Any other form of guarantee given to you by the retailer is his/her responsibility. For more information, we recommend that you carefully read the section on WATER RESISTANCE. There is a $8.50 handling charge to cover return shipping, insurance and handling. When shipping your timepiece, we ask that you DO NOT include the gift box. For International returns/repairs, please visit www.haskelltimepieces.com/ tommybahama TO ACTIVATE YOUR WARRANTY Please visit www.haskelltimepieces.com/tommybahama TO REQUEST REPAIR WORK Please fill in the Tommy Bahama Timepiece Service Request form (available at www.haskelltimepieces.com/tommybahama) and send it along with your timepiece, a copy of the Tommy Bahama Warranty Certificate (or sales receipt), and a description of the problem to the authorized Tommy Bahama Timepiece Service Center. Postage, packing and insurance costs are your responsibility. Tommy Bahama Service Center Serving the United States of America, Canada and the Caribbean ONLY HASKELL TIMEPIECES, LLC Timepiece Service Center 114 Seaview Drive. Secaucus, NJ 07096 Tel: 201-271-2524 customerservice@haskelltimepieces.com 4

TWO YEAR LIMITED WARRANTY Some retail stores will have supplies of reversible shipping cartons (for protection in shipping) and extra service request forms we provide for your use. We will also send you a shipping mailer if you request one by calling our service center: 1-201-271-2524 When shipping your timepiece, we ask that you DO NOT include the gift box. We highly recommend you insure your parcel shipment since you are liable for getting the timepiece to our service center. You are also responsible for adequately protecting the timepiece during shipment. For service work that is not covered under warranty, such as battery, crystal, case or crown replacement, Tommy Bahama Timepiece Service Centers will perform the services you request for a charge dependent upon timepiece style and type of work requested. These charges may be subject to change. The Tommy Bahama Service Center will contact you with an estimate for repairs not covered under warranty. APPLICABLE IN THE US NO IMPLIED WARRANTIES SHALL APPLY TO THIS PRODUCT FOR ANY PERIOD BEYOND THE TWO (2) YEAR TERM OF THIS WRITTEN WARRANTY UNDER NO CIRCUMSTANCES SHALL THE MANUFACTURER BE LIABLE FOR ANY INCIDENTAL DAMAGES SUSTAINED IN CONNECTION WITH THIS PRODUCT, AND ANY RECOVERY MAY NOT BE GREATER THAN THE PURCHASE PRICE PAID FOR THIS PRODUCT. Some states, however, do not allow the exclusion or limitation on how long an implied warranty lasts or allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. No person or company is authorized to change the terms of this warranty. 5

WATER RESISTANCE General Information Before using timepiece in or near water, be sure that crown is pushed incompletely. If timepiece is underwater or wet, do not use pushers, rotating bezels or crowns. If timepiece becomes wet, wipe it dry as soon as possible. If timepiece comes in contact with salt water, rinse case and bracelet immediately and thoroughly. Do not take your timepiece into a Hot Tub or Sauna. Extreme heat and pressure may cause your timepiece to lose its water resistance. Water resistance is not permanent. In the course of time, as your case becomes worn, the water resistance of the timepiece may decrease. WATER SUITABLE ATMOSPHERE RESISTANCE 3 ATM / Suitable for washing hands and light splashing 30 Meters /100 Feet 5 ATM / 50 Meters / 165 Feet 10 ATM / 100 Meters / 300 Feet 20 ATM / 200 Meters / 660 Feet Suitable for light swimming. E.g.: Bathing in a pool or low tide waters, but not suitable for diving Suitable for most water sports. E.g.: Swimming, surfing and snorkeling, but not suitable for deep water diving Suitable for all high impact water sports and scuba diving at depths not requiring helium gas Water resistance is not guaranteed for a depth beyond that which is indicated on your Tommy Bahama timepiece. The water resistance of your Tommy Bahama timepiece is ensured by a set of seals. However, these seals are subject to deterioration due to natural aging and should be changed regularly. 6

General Information SCREW DOWN CROWNS Some Tommy Bahama Relax gents models are fitted with screw down crowns. TO OPERATE n Unscrew crown using thumb and forefinger by rotating counterclockwise until the crown releases from the case. (fig. 1) n Follow the setting guide for the movement type of your Tommy Bahama watch. n Simultaneously press and rotate the crown clockwise with thumb and forefinger until the crown screws down firmly against the case. (fig. 2) 1 2 NOTE: Crown must be screwed into the case to assure water resistance. If crown is not screwed into the case properly, water, dust and particles can damage your watch. 7

Watches without a Calendar TWO HAND /THREE HAND MODELS TO SET THE TIME: 1. Pull crown out to first click position B. 2. Turn crown to set time. 3. Push crown back to position A A B 1 A B 1 A B 1. Second Hand 8

Watches with a Calendar TWO HAND /THREE HAND MODELS TO SET THE TIME: 1. Pull crown out to second click position C. 2. Turn crown to set time. 1 1 A B C A B C 1 A B C 1. Calendar 9

Watches with a Calendar TO SET THE DATE: 1. Pull crown out to first click position B. 2. Turn crown clockwise or counter-clockwise to set date. NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date and then reset to the correct time. 10

Multi Function Models TWO-EYE MULTI-FUNCTION MODELS TO SET THE DAY (OF THE WEEK): 1. Pull crown out to second click position C. 2. Turn crown clockwise to set day. 1. Second Hand 2. Day Hand 2 3 3. Date Hand A B C 1 2 1 3 A B C NOTE: The Day Hand will move together with the Hour Hand and Minute Hand. Keep turning the crown until the desired day has been reached. 11

Multi Function Models TO SET THE TIME: 1. Pull crown out to second click position C. 2. Turn crown to set time. NOTE: The 24 Hour Hand will also be set during time setting. TO SET THE DATE: 1. Pull crown out to first click position B. 2. Turn crown counter-clockwise to set date. NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date and then reset to the correct time. 12

Multi Function Models THREE-EYE MULTI-FUNCTION MODELS TO SET THE DAY (OF THE WEEK): 1. Pull crown out to second click position C. 2. Turn crown clockwise to set day. 1 5 2 1. Hour Hand 2. Minute Hand 3. Second Hand 4. 24 Hour Hand 5. Day Hand 6. Date Hand 4 3 6 A B C 1 2 5 6 3 4 A B C NOTE: The Day Hand will move together with the Hour Hand and Minute Hand. Keep turning the crown until the desired day has been reached. 13

Multi Function Models TO SET THE TIME: 1. Pull crown out to second click position C. 2. Turn crown to set time. NOTE: The 24 Hour Hand will also be set during time setting. TO SET THE DATE: 1. Pull crown out to first click position B. 2. Turn crown either clockwise or counter-clockwise to set date. NOTE: The direction of crown turning for date setting varies on different watch models. NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date and then reset to the correct time. 14

Chronograpgh Models THREE-EYE CHRONOGRAPH MODELS 1. Hour Hand 2. Minute Hand 3. Second Hand 4. Chronograph 1/10 Second Hand 5. Chronograph Second Hand 6. Chronograph Minute Hand 7. Date Window 6 1 3 4 5 2 7 S1 A B C S2 S1- Chronograph start/stop button S2- Chronograph split/split release/reset button TO ADJUST THE CHRONOGRAPH HANDS POSITION: Before setting the time, check if the Chronograph 1/10 Second Hand, Chronograph Second Hand and Chronograph Minute Hand are at the zero position. If the Chronograph is in use, press the button in the following order to reset it, and then check if the Chronograph hands have returned to zero position. 15

Chronograpgh Models If the chronograph is counting: If the chronograph is stopped: If the split time is displayed: S1 S2 S2 S2 S1 S2 In case one or several chronograph hands are not at the 12 o clock position due to certain reasons (e.g. following a battery change), that needs to be adjusted. 1. Pull crown out to second click position C. 2. Press S1 or S2 button to set the Chronograph Second Hand and Chronograph Minute Hand (mechanically coupled). By pressing S1 or S2 button, the hands will move counter-clockwise or clockwise respectively. TO SET THE TIME: 1. Pull crown out to second click position C. 2. Turn crown to set time. 16

TO SET THE DATE: 1. Pull crown out to first click position B. 2. Turn crown clockwise to set date. Chronograpgh Models NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date and then reset to the correct time. TO USE THE CHRONOGRAPH (STOPWATCH): For the measurement of elapsed time, 1. Press S1 button to start counting. 2. To stop counting, press S1 button once. Press S1 button again to resume from where it left off. 3. To reset to zero, press S1 button to stop counting and then press S2 button. 17

Chronograpgh Models For the measurement of split time, 1. Press S1 button to start counting. 2. While the chronograph is running, press S2 button once to register a lap. The chronograph is still running in the background. To display the currently accumulated time, press S2 button again. The chronograph hands will quickly advance to the ongoing measured time. 3. Repeat the last step until all the laps have been registered. 4. To reset to zero, press S1 button to stop counting and then press S2 button. NOTE: The chronograph is able to measure up to 60 minutes. 18

THREE-EYE CHRONOGRAPH MODELS 1. Hour Hand 2. Minute Hand 3. Second Hand 4. 24 Hour Hand 5. Chronograph Second Hand 6. Chronograph Minute Hand 7. Date Window Chronograpgh Models 1 6 4 2 S1- Chronograph start/stop button S2- Chronograph split/split release/reset button TO ADJUST THE CHRONOGRAPH HANDS POSITION: 3 5 7 S1 A B Before setting the time, check if the Chronograph Second Hand and Chronograph Minute Hand are at the zero position. If the Chronograph is in use, press the button in the following order to reset it, and then check if the Chronograph hands have returned to zero position. S2 If the chronograph is counting: If the chronograph is stopped: If the split time is displayed: S1 S2 S2 S2 S1 S2 19

Chronograpgh Models In case one or several Chronograph hands are not at the zero position due to certain reasons (e.g. following a battery change), that needs to be adjusted. 1. Pull crown out to position C. 2. Press S1 button to set the Chronograph Second Hand and Chronograph Minute Hand in clockwise direction. Holding down the button will allow quick advance. 3. Press S2 button to set the Chronograph Second Hand and Chronograph Minute Hand in counter-clockwise direction. Holding down the button will allow quick advance. 4. Push crown back to position A to set. TO SET THE TIME: 1. Pull crown out to position B. 2. Turn crown to set time. NOTE: The 24 Hour Hand will also be set during time setting. 20

TO SET THE DATE: Chronograpgh Models 1. Pull crown out to first click position B. 2. Turn crown clockwise to set date. NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly. If it is necessary to set the date during that time period, first change the chronograph time to any time outside it, set the date and then reset the correct time. TO USE THE CHRONOGRAPH (STOPWATCH): For the measurement of elapsed time, 1. Press S1 button to start counting. 2. To stop counting, press S1 button once. Press S1 button again to resume from where it left off. 3. To reset to zero, press S1 button to stop counting and then press S2 button. NOTE : The chronograph is able to measure and display time in second unit up to maximum of 30 minutes. The chronograph will stop automatically after running continuously for 30 minutes. 21

Chronograpgh Models THREE-EYE CHRONOGRAPH MODELS 1. Hour Hand 2. Minute Hand 1 3. Second Hand 4. 24 Hour Hand 5. Chronograph Second Hand 6 6. Chronograph Minute Hand 3 5 S1- Chronograph start/stop button S2- Chronograph split/split release/reset button TO ADJUST THE CHRONOGRAPH HANDS POSITION: 4 2 S1 A B Before setting the time, check if the Chronograph Second Hand and Chronograph Minute Hand are at the zero position. If the Chronograph is in use, press the button in the following order to reset it, and then check if thechronograph hands have returned to zero position. S2 If the chronograph is counting: If the chronograph is stopped: If the split time is displayed: S1 S2 S2 S2 S1 S2 22

Chronograpgh Models In case one or several Chronograph hands are not at the zero position due to certain reasons (e.g. following a battery change), that needs to be adjusted. 1. Pull crown out to position B. 2. Press S1 button to set the Chronograph Second Hand and Chronograph Minute Hand in counter-clockwise direction. Holding down the button will allow quick advance. 3. Press S2 button to set the Chronograph Second Hand and Chronograph Minute Hand in clockwise direction. Holding down the button will allow quick advance. 4. Push crown back to position A to set. TO SET THE TIME: 1. Pull crown out to position B. 2. Turn crown clockwise or counter-clockwise to set time. NOTE: The 24 Hour Hand will also be set during time setting. 23

Chronograpgh Models TO USE THE CHRONOGRAPH (STOPWATCH): For the measurement of elapsed time, 1. Press S1 button to start counting. 2. To stop counting, press S1 button once. Press S1 button again to resume from where it left off. 3. To reset to zero, press S1 button to stop counting and then press S2 button. For the measurement of split time, 1. Press S1 button to start counting. 2. While the Chronograph is running, press S2 button once to register a lap. The Chronograph is still running in the background. 3. To display the currently accumulated time, press S2 button again. The two Chronograph hands will quickly advance to the ongoing measured time. 4. Repeat the last step until all the laps have been registered. 5. To reset to zero, press S1 button to stop counting and then press S2 button. 24

THREE-EYE CHRONOGRAPH MODELS 1. Hour Hand S1 2. Minute Hand 3. Second Hand or Chronograph 1/20 Second Hand 4. 24 Hour Hand 5. Chronograph Second Hand 6. Chronograph Minute Hand 7. Date Window Chronograpgh Models 6 4 S1- Chronograph start/stop button S2- Chronograph split/split release/reset button TO ADJUST THE CHRONOGRAPH HANDS POSITION: 3 1 3 2 7 A B C Before setting the time, check if the Chronograph 1/20 Second Hand (for certain models only), Chronograph Second Hand and Chronograph Minute Hand are at the zero position. If the chronograph is in use, press the button in the following order to reset it, and then check if the chronograph hands have returned to zero position. S2 If the chronograph is counting: If the chronograph is stopped: S1 S2 S2 25

Chronograpgh Models In case one or several chronograph hands are not at the zero position due to certain reasons (e.g. following a battery change), that needs to be adjusted. 1. Pull crown out to second click position C. 2. Press S1 button to set the Chronograph Second Hand. Holding down the button will allow quick advance. 3. Press S2 button to set the Chronograph 1/20 Second Hand (for certain models only). Holding down the button will allow quick advance. 4. Push crown back to position A. TO SET THE TIME: 1. Pull crown out to second click position C. 2. Turn crown to set time. NOTE: The 24 Hour Hand will also be set during time setting. TO SET THE DATE: 1. Pull crown out to first click position B. 2. Turn crown clockwise or counter-clockwise to set date. 26

Chronograpgh Models NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly on the following day. If it is necessary to set the date during that time period, first change the time to any time outside it, then set the date and then reset to the correct time. TO USE THE CHRONOGRAPH (STOPWATCH): Press S2 button to switch the watch to chronograph mode, 1. Press S1 button to start counting. 2. To stop counting, press S1 button once. Press S1 button again to resume from where it left off. 3. To reset to zero, press S1 button to stop counting and then press S2 button. NOTE: For certain models, the chronograph is able to measure and display time in 1/20 second units up to maximum of 1 hour. The retrograde Chronograph 1/20 Second Hand keeps counting continuously for 60 seconds after starting, and then stops at zero position. When S1 button is pressed to stop the chronograph, the Chronograph 1/20 Second Hand will quickly advance to display the measured time. 27

Chronograpgh Models THREE-EYE CHRONOGRAPH MODELS DUAL TIME 1. Hour Hand (Home Time) 2. Minute Hand 3. Chronograph Second Hand 4. 12 Hour Hand (Local Time) 5. Chronograph Minute Hand 6. Small Second Hand 7. 24 Hour Hand (Local Time) 8. Date Window (Local Time) 3 1 2 5 7 S1- Chronograph start/stop button S2- Chronograph split/split release/reset button TO ADJUST THE CHRONOGRAPH HANDS POSITION: 6 8 4 S1 A B C Before setting the time, check if the Chronograph Second Hand and Chronograph Minute Hand are at the zero position. If the Chronograph is in use, press the button in the following order to reset it, and then check if the Chronograph hands have returned to zero position. S2 28

Chronograpgh Models If the chronograph is counting: If the chronograph is stopped: If the split time is displayed: 29 S1 S2 S2 S2 S1 S2 In case one or several Chronograph hands are not at the zero position due to certain reasons (e.g. following a battery change), that needs to be adjusted. 1. Pull crown out to position C. 2. Press S1 button to set the Chronograph Second Hand and Chronograph Minute Hand in clockwise direction. Holding down the button will allow quick advance. 3. Press S2 button to set the Chronograph Second Hand and Chronograph Minute Hand in counter-clockwise direction. Holding down the button will allow quick advance. 4. Push crown back to position A to set. TO SET THE TIME: 1. Pull crown out to position B. 2. Turn crown to set time. NOTE: The 24 Hour Hand will also be set during time setting.

Chronograpgh Models TO SET THE DATE: 1. Pull crown out to first click position B. 2. Turn crown clockwise to set date. NOTE: Do not set the date between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not change properly. If it is necessary to set the date during that time period, first change the chronograph time to any time outside it, set the date and then reset the correct time. * Calendar is linked to Hour Hand ( local time). USING THE TIME DIFFERENCE CORRECTION When moving to a country or area which is in a different timezone, the current time in the local time can be corrected. As the date calendar is linked with time, the date in the local time is also corrected. 1. Pull the crown out to the 1st click position when the second hands has reached the zero position. Turn the crown anticlockwise to set the second time zone. 30

Chronograpgh Models * Date may gain in some countries or regions. In this case, please set the date also when you set the time. 2. After the date has been set, push the crown back to the normal position. TO USE THE CHRONOGRAPH (STOPWATCH): For the measurement of elapsed time, 1. Press S1 button to start counting. 2. To stop counting, press S1 button once. Press S1 button again to resume from where it left off. 3. To reset to zero, press S1 button to stop counting and then press S2 button. NOTE : The chronograph is able to measure and display time in second unit up to maximum of 60 minutes. The chronograph will stop automatically after running continuously for 60 minutes. 31

MAKE LIFE ONE LONG WEEKEND

Warranty Certificate To activate your Tommy Bahama warranty, or for product instructions, water resistance and service information, please visit www.haskelltimepieces.com/tommybahama Date of Purchase: Model Number: Authorized Dealer Information: 33

Welcome to the Tommy Bahama Family.

MAKE LIFE ONE LONG WEEKEND 35