Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Lano Equipment - Anoka Scott Fahey 6140 Hwy 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 763-422-3949 scott_f@lanoequip.com www.lanoequip.com Version of Excel used: Furnish separate price quote for: EXCAVATOR 1.1 Make & Model Operating Weight Engine Make & Model Tier 3, 3i, or 4 Compliant? HP at rated RPM (specify net or gross) Number of speeds Max travel speed, MPH Drawbar pull, lbs. Shoe width, in. # of rollers on lower track Ground pressure, PSI Ground clearance, in. Overall width of excavator Main pump(s) total flow, GPM Swing speed, RPM Boom length, ft-in Arm length, ft-in Arm breakout force, Normal, lb-ft Max dig depth, ft-in Reach at ground line, ft-in Dump height, ft-in Lift over end, 12, lbs. Lift over end, max reach, lbs. Lift over side, 12, lbs. Lift over side max reach, lbs. Bucket breakout force, normal lb-ft. Tail swing radius, ft-in. Does excavator include bucket? Warranty Price
http://www.kubota.com/product/kx057/kx057.aspx 2010 Kubota KX057-4 12,200 lbs Kubota V2607-CR-E4 Tier 4 49.5 GROSS / 2,200 RPM 2 SPEEDS 1.8 / 3.1 14,480 LBS 15.7" 5 ROLLERS 4.52 PSI 12.2 INCHES 6' 5.2" 39.4 GPM 2 VARIABLE, 1 GEAR 9.3 RPM INA INA 5,644 FT/LBS 12' 8.2" 20' 0.5" 13' 8.6" 3,890 LBS 2,370 LBS 1,960 LBS 1,190 LBS 11,177 FT LBS 50" NO 1 YR, 2 YRS ENGINE 1-6 MO/600 HOURS PARTS AND LABOR 7-12 MO/601-1,000 HRS PARTS ONLY $58,915.00
2.0 2.1 2.2 2.3 2.4 2.5 3.0 3.1 3.2 3.3 3.4 3.5 4.0 4.1 4.2 5.0 5.1 6.0 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14
7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22 7.23 7.24 7.25 7.26 7.27 7.28 7.29 7.30 7.31 7.32 7.33 7.34 7.35 8.0 9.0 10.0 10.1 10.2 11.0
12.0 13.0 14.0
OPERATOR ENVIRONMENT OPTIONS ROPS / FOPS Canopy - DEDUCT Suspension Seat K9946 3" Retractable Seat Belt K7942A Radio w/mp3 port and weather band V4218A Strobe EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS K7927 Travel alarm Block Heater Cab Mirror kit - 2 side, one rear Hydraulic Angle Blade with float Canopy work light (not for cab) UNDERCARRIAGE OPTIONS Rubber Tracks Steel Tracks (requires item 2.1 Air conditioned cab and item 3.4 hydraulic angle blade) HYDRAULICS OPTIONS SP2 4 way auxiliary hydraulics (for simultaneous operation of thumb with other hydraulic attachments like breakers, compactors, augers etc or to operate rotating grapples) BOOM AND ARM OPTIONS BUCKET/COUPLERS/TOOL OPTIONS QUICK ATTACH BUCKETS K7915 Quick Coupler with 2 pins, 1 locking pin and hardware K7917 12" QA 3.0 cu. ft.trenching BUCKET K7918 18" QA 4.5 cu. ft. TRENCHING BUCKET (hyd thumb tines will not mesh with teeth on this bkt) K7919 24" QA 6.3 cu. ft. TRENCHING BUCKET K7920 30" QA 8.0 cu. ft. TRENCHING BUCKET K7921 36" QA 8.0 cu. ft. TRENCHING BUCKET K7926 36" QA 3.48 cu. ft. CEMETERY BUCKET K7922 36" QA 6.64 cu. ft. DRAINAGE BUCKET (pre-drilled for bolt on edge) K7924 48" QA 8.5 cu. Ft. DRAINAGE BUCKET (pre-drilled for bolt on edge) WTB39-460 39" QA 4.6 cu. ft. TILT GRADING BUCKET (includes bolt on edge) K7916 BUCKET HANGERS Set of 2 ear blanks. Converts buckets and attachments to quick coupler style. Modification to match bucket or attachment contour required OTHER ATTACHMENTS K7474 bolt on cutting edge for 36" grading buckets K7878 bolt on cutting edge for 48" grading buckets K7937 HYDRAULIC THUMB KIT (K7915) quick coupler required)
KXB560Q HYDRAULIC BREAKER, 750 ft. lbs rated includes manual, side plates, hoses, hyd quick couplers, one moil point and one chisel point and K7477 hose kit. Requires K7931 (QA) mount bracket and K7941 hose kit K7931 BREAKER MOUNT BRACKET (req'd for KXB560Q breaker) K7941 HYD BREAKER HOSE KIT (req'd for KXB560Q breaker) K7773 ACCUMULATOR CHARGE KIT for breaker service K7932 FROST RIPPER WCB0518 COMPACTION WHEEL 19.5" DIAMETER 900 LBS WCBH118 COMPACTION WHEEL, 30" DIAMETER 1,100 LBS DC5000 16"X34" VIBRATORY PLATE COMPACTOR DC6000 18"X34" VIBRATORY PLATE COMPACTOR DC6500 24"X34" VIBRATORY PLATE COMPACTOR X1475 PLANETARY DRIVE AUGER HEAD 2 9/16" ROUND DRIVE (2" HEX AVAIL) STANDARD DUTY AUGER BIT 6" STANDARD DUTY AUGER BIT 9" STANDARD DUTY AUGER BIT 12" STANDARD DUTY AUGER BIT 15" STANDARD DUTY AUGER BIT 18" STANDARD DUTY AUGER BIT 24" STANDARD DUTY AUGER BIT 30" STANDARD DUTY AUGER BIT 36" AUGER BIT EXTENSION 24" AUGER BIT EXTENSION 48" COMPLETE SET OF OEM AIR AND FLUID FILTERS INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.: (See Special Terms and Conditions) EXTENDED WARRANTY OPTIONS One year / 1,000 hour extension to base warranty Two year / 2,000 hour extension to base warranty NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: Percent (%) of Rental Fee applied to purchase price:
VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS DELIVERY STARTING POINT - City, State, Zip Price per loaded mile
($4,449) Std $127 $248 $276 $143 $175 $280 $2,427 $135 STD $1,300 $1,387 $770 $987 $1,001 $1,051 $1,286 $1,458 $1,960 $1,038 $1,497 $5,897 $294 $150 $200 $1,925
$9,494 $727 $567 $876 $990 $2,787 $4,622 $5,272 $5,605 $5,998 $1,950 $254 $297 $335 $398 $430 $554 $734 $891 $282 $494 $149 $98 $2,400 $4,400 $20/hr overages. $275 day 8hrs $1,080 40 hrs $2,700 176 hrs 85% 90 days, 75% after
$20 hr % Discount NO FLAT RATE ALLOWED Anoka, MN 55303 $3.50 $150 minimum