Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com +91 9920 900 311 +91 9619 010 130
Company Overview: INVACO (Industrial Valve Company) is leading manufacturer of industrial valves. INVACO is an export oriented valve manufacturer producing top quality valves. INVACO valves are designed, developed, manufactured and tested under rigorous 100% quality control, inspections with full traceability of NACE, chemical, mechanical, hydro & air test records. All INVACO valves are produced in accordance with international standards like API, ASME, ANSI, AWWA, MSS, DIN, EN, ISO, BS, JIS, AS, IS etc. Contents INVACO committed to excellence by manufacturing top quality valves to meet customer s needs with low cost, on-time delivery & providing finest service in industry. INVACO manufacture Ball valves (Floating & Trunnion Mounted), Butterfly Valves (Damper, Slee ved, Double offset & Triple Offset), Gate Valves, Globe Valves & Check Valves for oil & gas, petrochemicals, refineries, power plants, water treatment plants, chemical, paper & pulp, sugar, steel, pharma, pipe- line transmission and other process industries. INVACO (Industrial Valve Company) is specialized in design, manufacturing & testing of CAST Steel Check Valves. All valves are designed as per ASME B16.34, API 6D, API 602, API 594, BS 1868, BS 5352 and follows ISO Company Overview Product Range Quality Standards GA Drawing Material of Construction Dimensions 01 01 02 03 04 05-06 9001:2015 Quality Management Systems. INVACO, Quality Policy 07 manufacture Check valve size from 2 to 24 (50mm to 600mm) with pressure range from Class 150 to Class 2500 and equivalent EN pressure ratings. All Check valves produced from materials like WCB, WC6, WC9, CA15, LCB, LCC, CF8, CF3, CF3M, CF8, CF8M, Alloy20, 4A, 5A, 6A, Aluminum Bronze, Inconel, Monel, Hast Alloys, and other special materials. INVACO (Industrial Valve Company) aims to produced a zero defect valves for long life and reliable services. Making continual improvements aims towards to minimize the Total Ownership Cost for valued customers. Also aims to established sales and services of valves & actuators worldwide. INVACO is ready to serve various global industries towards a sustainable new world. This catalog provides basic information of Check Valves. Every effort has been made to maintain technical accuracies however INVACO has reserve rights to make any change in design and materials without prior notice. Product Range for Check Valve: Valve Design Check Valve ASME CLASS / in ( mm) 150 300 600 800 900 1500 2500 2 24 (50 600 ) 2 24 (50 600 ) 2 24 (50 600 ) ---- 2 16 (50 400 ) 2 14 (50 350 ) 2 10 (50 250 ) Forge Check Valve ---- ---- ---- 1/2 2 ( 15 50 ) 1/2 2 ( 15 50 ) 1/2 2 ( 15 50 ) ---- 1
Quality Standards for Check Valve: Design Standards:- Gate Valve Globe Valve Check Valve API 600, API 602, ASME B16.34, BS 1414, ISO 10434, BS 5352 ASME B16.34, BS 1873, API 600, API 602, BS 5352 ASME B 16.34, API 6D, BS 1868, API 594, API 602, BS 5352 Common Standards:- API 598 Valve Inspection and Testing. ASME B 16.5 Pipe Flanges and Flanged Fittings. ASME B 16.47 Large Diameter Steel Flanges. ASME B 16.10 Face to Face and End to End Dimension of Valves. ASME B 16.25 Butt Welding Ends. ASME B 16.11 Forged Steel Socket Welding and threaded Fittings. ASME B 1.20.1 Pipe Threads for general Purposes. MSS SP- 6 MSS SP- 25 MSS SP- 55 MSS SP- 44 MSS SP 61 BS 6755 BS EN 12266 BS EN 6364 BS EN 558 BS EN 1092 BS EN 12516 Standards Finishes for contact surface for flanges. Standard marking system for valves, fittings, flanges. Steel Casting Visual methods for Evaluation of surface Irregularities. Steel Pipeline Flanges. Pressure Testing of Valves. Testing of Valves. Industrial Valves Testing of Valves. Valves for Cryogenic Services. Face to Face & Centre to face dimensions soft, metal valves for use in pipe Systems. Flanges & their joints- Circular Flanges for Pipes, valves, Fittings & Accessories. Industrial Valves Shell Design Strength. ISO 9001:2015 Quality management System Requirements. ISO 5208 Industrial valves pressure testing for metallic valves. NACE MR0175 Petroleum & Natural Gas industries materials for use in H2S containing Environments in Oil and Gas production. NACE TM 0284 Standard Test Method ( HIC). NACE TM 0177 Standard Test Method. NACE MR 0103 Standard 2
GA Drawing for Check Valve (Model 6000): Design Features Reference Standards : - 2 to 24 (50mm to 600mm) Design: - ASME B16.34, API 6D, BS 1868 Rating: - Class 150 to Class 2500 Face to Face: -ASME B16.10, API 6D, EN 558 Disc Design as per Gravitational Acceleration Drilling:- ASME B16.5, EN1092 Stallite or Hardface Testing: - API 598, EN 12266 Tongue & Groove Design But Weld End :- ASME B16.25 Operations: - Handwheel, Gear & Actuation Special: - NACE MR 01-75 3
Material of Construction for Check Valve (Model 6000): Bill of Material For Check Valve Sr. No. Part Carbon Steel 1 Body A216 Gr WCB Low Temp. Carbon Steel A325 Gr. LCB, LCC Stainless Steel A351 Gr. CF8M, CF8 DUPLEX A890 Gr. 4A, 5A, 6A Aluminum Bronze C95800, C95500, C63200 Nickel Alloys A494 Gr.CW6MC, CW12M, M 35-1 2 Seat Ring 3 Disc CA15, CF8, CF8M CF8M CF8M, CF8 4A, 5A, 6A C95800, C95500, C63200 CW6MC, 12MW, M35-1 4 Hinge WCB LCB, LCC 5 Hinge Pin F6a, AISI410, F304, F316 F316L F316L, F304L F51, F53, F55 MONEL 6 Bracket WCB LCB, LCC CF8M, CF8 4A, 5A, 6A 7 Bracket Bolt A193 Gr. B7 / B7M A320 Gr L7, L7M C95800, C95500, C63200 A193 Gr. B8, B8M Inconel 625, 750, 825, Monel CW6MC, 12MW, M35-1 8 Washer Carbon Steel Stainless Steel 9 Disc Nut 10 Gasket A194 Gr. 2H, 2HM SPWG + (SS304/SS316) A194 Gr. 4L, 7M, 4 SPWG + SS316 SPWG + (SS304/SS316) SPWG + Duplex 11 Cover WCB LCB, LCC CF8M, CF8 4A, 5A, 6A 12 Nut 13 Stud A194 Gr. 2H, 2HM A193 Gr. B7 / B7M A194 Gr. 4L, 7M, 4 A320 Gr L7, L7M A194 Gr. 8MA, 8M SPWG + ( Monel / Inconel ) C95800, C95500, C63200 A194 Gr. 8MA, 8M A193 Gr. B8, B8M CW6MC, 12MW, M35-1 NOTE: ** Stellite or Hardface are optional and as per customer requirement. ** "INVACO" reserve rights to change MATERIALS & DESIGN anytime without prior notice. 4
Dimensions for Check Valve (Model 6000): Design & Features:- Design: - ASME B.16.34, API 6D, BS 1868 Face to Face: - ASME B16.10, API 6D, EN 558 Flange Drilling: - ASME B16.5, EN 1092 Testing: - API 598, EN12266, ISO 5208. But-Weld End: - ASME B16.25 Materials:- Confirms to ASTM with NACE MR 01 75 Bolted Cover & Swing Disc Ring Gasket Design from Class900 & Above Threaded Seat Ring up to 3 Seal Weld Seat From 4 & above. Stellite or HardFace Disc Design considering Gravitational Acceleration Lifting Hook will be provided from 8 & above. ASME CLASS 150 F (mm) in 2 2½ 3 4 6 8 10 12 14 16 18 20 24 mm 50 65 80 100 150 200 250 300 350 400 450 500 600 RF & 203 216 241 292 356 495 622 699 787 684 978 978 1295 RTJ 216 229 254 305 368 508 635 711 800 876 991 991 1308 H mm 145 160 195 220 275 325 395 435 500 560 635 675 795 ASME CLASS 300 F (mm) in 2 2½ 3 4 6 8 10 12 14 16 18 20 24 mm 50 65 80 100 150 200 250 300 350 400 450 500 600 RF & 267 292 318 356 445 533 622 711 838 864 978 1016 1346 RTJ 283 308 333 371 460 549 638 727 854 879 994 1035 1368 H mm 155 170 200 225 275 325 415 435 500 575 635 675 795 5
ASME CLASS 600 F (mm) in 2 2½ 3 4 6 8 10 12 14 16 mm 50 65 80 100 150 200 250 300 350 400 RF & 292 330 356 432 559 660 787 838 889 991 RTJ 295 333 359 435 562 668 790 841 892 994 H mm 160 170 225 240 295 345 425 470 535 595 ASME CLASS 900 F (mm) in 2 2½ 3 4 6 8 10 12 14 mm 50 65 80 100 150 200 250 300 350 RF & 368 419 381 457 610 737 838 965 1029 RTJ 371 422 384 460 613 740 841 968 1038 H mm 240 254 270 300 385 490 595 680 760 ASME CLASS 1500 F (mm) in 2 2½ 3 4 6 8 10 12 14 mm 50 65 80 100 150 200 250 300 350 RF & 368 419 470 546 705 832 991 1130 1257 RTJ 371 422 473 549 711 842 1000 1146 1276 H mm 245 260 295 310 420 535 640 735 820 NOTE:- ** RF Raised Face, RTJ Ring Type Joint, But Weld End ** All dimensions are in mm unless & otherwise specified. ** INVACO reserves the right to change materials, design & dimensions anytime without prior notice. 6
Quality Policy At INVACO, we established this comprehensive Quality Management System to implement a strategy of continual improvement and compliance with the requirements of the ISO 9001:2015 Quality Assurance standard and other industrial valves standards by: Customer Focused: Make commitments we fully understand and believe we can meet and deliver. Meet all commitments to customers on time. Satisfy our customer s needs and exceed their expectations. Performance Driven: Verify that our products and services meet customer requirements. Monitor benchmark and continuously improve our business, products, and services, organization and employee s performance. Entire INVACO stick to the spirit and intent of this policy to ensure customer satisfaction is achieved at all respects and times. Issue No.:- 1 Next Review Date: - May 2018 (Sandesh Shamkuwar) Managing Director 7
Information: Your Local INVACO Representative: www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com +91 9619 010 130 +91 9920 900 311 WORK: 4123, Near Khadi Machine &, Petrol Pump, K.B. Road, Ambernath (w), Mumbai. OFFICE: 4 /202, Highland Residency, Thane (w), Mumbai, 400 607