Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser (may be fitted with optional secondary or absolute filter)* Terminal box Donaldson Torit DCE Fan chamber Cleaner motor C Filter chamber Joint line e f to centre of inlet spigot Contaminated air inlet (may be fitted either side or at rear) Quick-release sealer gear Dust container SIDE ELEVTION FRONT ELEVTION UNIMSTER DUST COLLECTOR WITH DUST CONTINER UM 153 illustrated. Suitable for inside locations. *Secondary filter and absolute filter not available for UM 72 dust collector. SPECIFICTIONS Inlet spigot Net Filtration DIMENSIONS in mm (inside dia.) Fan Motor Dust area C d e f rating container weight mm (approx.) UM 72 6.23 m 2 575 575 2029 600 729 648 101 G1 0.75 kw 55 litre 203 kg UM 103 9.29 m 2 765 575 25 800 883 6 203 G1 K3 0.75 kw 1. kw 80 litre 295 kg 300 kg G1 0.75 kw 333 kg K3 1. kw 338 kg UM 153 13.94 m 2 765 765 2591 800 883 6 203 K5 2.20 kw 80 litre 3 kg K7 3.00 kw 378 kg G8 5. kw 393 kg G1 0.75 kw 445 kg K3 1. kw 4 kg UM 253 22.67 m 2 1146 765 2942 11 1099 883 254 K5 2.20 kw 80 litre 465 kg K7 3.00 kw 490 kg G8 5. kw 5 kg Publication 2724E (G) 0906 Donaldson reserve the right to alter design without notice. Freedom from patent restrictions must not be assumed.
Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser (may be fitted with optional secondary or absolute filter)* Terminal box Donaldson Torit DCE C Fan chamber Cleaner motor Filter chamber Seating level SIDE ELEVTION UNIMSTER HOPPER TYPE DUST COLLECTOR UM 1H illustrated. Suitable for inside locations. *Secondary filter and absolute filter not available for UM 70H dust collector. SPECIFICTIONS FRONT ELEVTION Net Filtration DIMENSIONS in mm Fan Motor area C d rating weight (approx.) UM 70H 6.23 m 2 575 575 1338 600 G1 0.75 kw 170 kg UM 100H 9.29 m 2 765 575 1652 800 G1 K3 0.75 kw 1. kw 2 kg 2 kg G1 0.75 kw 270 kg K3 1. kw 275 kg UM 1H 13.94 m 2 765 765 1708 800 K5 2.20 kw 290 kg K7 3.00 kw 315 kg G8 5. kw 330 kg G1 0.75 kw 5 kg K3 1. kw 360 kg UM 2H 22.67 m 2 1146 765 1843 11 K5 2.20 kw 375 kg K7 3.00 kw 0 kg G8 5. kw 415 kg DUST CONTINER Typical dust densities 55 litre (2 cu.ft.) 80 litre (3 cu.ft.) Size pprox net weight 55 litre 5kg 80 litre 6kg reasonable total load for removal by hand would be 25 kg Dust Sander Graphite Sand Iron Steel Density with % voidage 0.13 kg/litre 0.80 kg/litre 1.33 kg/litre 3.58 kg/litre 3.72 kg/litre 2
Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 90 Cleaned air outlet 380 required for cleaner motor cover removal Cleaner motor Filter chamber Donaldson Torit DCE C Seating level SIDE ELEVTION FRONT ELEVTION UNIMSTER VENTING TYPE DUST COLLECTOR UM 1V illustrated. Suitable for inside locations and outside when fitted with optional weather cowl. SPECIFICTIONS Filtration DIMENSIONS in mm area C d Net weight (approx.) UM 70V 6.23 m 2 575 575 678 560 93 kg UM 100V 9.29 m 2 765 575 678 560 114 kg UM 1V 13.94 m 2 765 765 7 760 1 kg UM 2V 22.67 m 2 1146 765 7 760 175 kg d required for maintenance Lifting bracket (removable) 230 minimum clearance 90 Cleaned air outlet 380 required for cleaner motor cover removal Cleaner motor Filter chamber Donaldson Torit DCE Joint line C e f to centre of inlet spigot Contaminated air inlet (may be fitted either side or at rear) Quick-release sealer gear Dust container SIDE ELEVTION UNIMSTER VENTING TYPE DUST COLLECTOR WITH DUST CONTINER UM 153V illustrated. Suitable for inside locations and outside when fitted with optional weather cowl. SPECIFICTIONS FRONT ELEVTION Filtration DIMENSIONS in mm Inlet spigot Dust Net area C d e f (inside dia.) container weight mm (approx.) UM 72V 6.23 m 2 575 575 1369 560 729 648 101 55 litre 126 kg UM 103V 9.29 m 2 765 575 14 560 845 6 203 80 litre 174 kg UM 153V 13.94 m 2 765 765 1542 760 845 6 203 80 litre 199 kg UM 253V 22.67 m 2 1146 765 1758 760 1061 883 254 80 litre 265 kg 3
Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser (may be fitted with optional secondary or absolute filter) Terminal box Donaldson Torit DCE Fan chamber Cleaner motor C Filter chamber Joint line e lternative insert with swing door for sack tipping units fitted with optional explosion relief panels Opening: 5 wide x 665 deep Quick-release hatch (removed when tipping) Standard opening on all models: 680 wide x 700 deep Seating level SIDE ELEVTION UNIMSTER SCK TIPPING UNIT UM 1STU illustrated. Suitable for inside locations. FRONT ELEVTION SPECIFICTIONS Filtration DIMENSIONS in mm Motor Net Fan weight area C d e rating (approx.) UM 100STU 9.29 m 2 765 575 2706 800 1054 K3 1. kw 313 kg UM 1STU 13.94 m 2 765 765 2762 800 1054 K3 1. kw 368 kg UM 2STU 22.67 m 2 1146 765 2897 11 1054 K3 1. kw 553 kg DESIGN LIMITS (standard equipment) Temperature range: 10 to +60 C Pressure limits: Collectors with fan: as fan performance curves from shut-off to operating pressure Venting type collectors: 300 mm W.G. to +2 mm W.G. Dimension tolerances: ±3 mm on main dimensions; ±2 mm on detail dimensions Equipment suitable for use in a potentially explosive atmosphere (Directive 94/9/EC) satisfying the requirements for group II category 2D and 3D T1 C is available 4
Unimaster Dust Collectors Series UM 70-2 c DIMENSIONS in mm c UM 70 225 225 116 UM 100 295 2 116 UM 1 320 320 116 UM 2 3 3 3 CLENED IR OUTLET DETILS UM 1 illustrated 193 193 46.5 37 193 130 284 120 120 46.5 37 46.5 130 46.5 111.5 111.5 UM 70V UM 100V and 1V 284 37 284 120 120 37 37 120 120 37 UM 2V CLENED IR OUTLET DETILS FOR VENTING TYPE COLLECTORS ll holes 4 mm 5
Unimaster Dust Collectors Series UM 70-2 180 175 180 225 180 180 175 575 645 175 575 645 180 180 575 645 765 8 UM 70H and 70V UM 100H and 100V 225 200 200 225 765 8 225 765 8 765 1145 8 1215 UM 1H and 1V UM 2H and 2V PERTURE ND MOUNTING FLNGE DETILS FOR HOPPER ND VENTING TYPE COLLECTORS ll holes 12 mm for M10 bolts 6
Unimaster Dust Collectors Series UM 70-2 2 2 2 2 190 2 575 675 765 865 190 2 765 865 765 865 UM 100STU UM 1STU 475 475 Safety bars (30 x 30 x 5 RS) welded at equal intervals between side members 2 2 765 865 1145 1245 UM 2STU PERTURE ND MOUNTING FLNGE DETILS FOR SCK TIPPING UNITS ll holes 12 mm for M10 bolts 7
Unimaster Dust Collectors Series UM 70-2 0 STTIC PRESSURE T FN INLET (mm W.G.) 0 300 2 200 1 100 G1 K3 K5 G8 K7 UNIT RESISTNCE CURVE 0 0 1000 10 2000 20 3000 00 00 IR VOLUME (m 3 /h) UNIT PERFORMNCE CURVES FN SELECTION These curves indicate static pressure available at fan inlet for a given volume when fitted inside a Unimaster dust collector. To select the most suitable fan for a given application: 1 Determine the air volume, in m 3 /h, needed to entrain the dust. 2 Read off the unit resistance, in mm W.G., at air volume required. 3 ssess pressure drop over filter bags prior to cleaning, usually to 100 mm W.G. 4 Estimate pressure drop through connected system i.e. between point of entrainment and collector inlet. 5 The sum of 2, 3 and 4 W.G. required. 6 Consult graph for fan performances available. Sack Tipping Units have K3 (1.5 kw) fans with modified outlet to ensure adequate face velocities at the tipping hatch under normal operating conditions. Typically, the exhaust rate for the UM 2STU is 1275 m 3 /h (7 cfm). UCS Controller ELECTRICL REQUIREMENTS Voltage input: 220-2V, Single Phase, Hz (for collectors with G1 or K3 fans only) 218-242V / 380-420V, Three Phase, Hz 2-277V / 4-480V, Three Phase, 60Hz or to suit local voltage 8
Unimaster Dust Collectors Series UM 70-2 NOISE LEVELS Machinery noise levels are an important consideration in the design and selection of new equipment. Several EC Directives and National Laws/Regulations adopting these directives make reference to airborne noise emissions. ctions that employers are required to comply with if employees are subjected to a daily personal noise exposure Lep,d of d() or more are also specified. ll Unimaster dust collectors, when fitted with an acoustic diffuser, secondary filter or absolute filter, operating an 8 hour shift, are below this action limit. WEIGHTED SOUND PRESSURE LEVELS ll readings were taken in normal industrial areas, i.e. semi-reverberant surroundings, with local equipment silent. Measurements were taken at maximum air flow conditions at 1.0 metre radius from the equipment housing and 1.6 metres above base level, using a precision sound level meter and octave filter. G1 K3 K5 K7 G8 With acoustic diffuser 65 d() 67 d() 68 d() 69 d() 72 d() With secondary filter * 67 d() 68 d() 69 d() 72 d() With absolute filter * 67 d() 68 d() 69 d() 72 d() Noise levels of installed equipment may vary due to site conditions. *Secondary and absolute filter not supplied with G1 fan. Measured data. 29 c 1 minimum clearance 194 109 175 SIDE ELEVTION (Detail of cleaned air outlet with weather cowl and lid removed) SIDE ELEVTION OPTIONL WETHER COWL UM 1V illustrated SPECIFICTIONS DIMENSIONS in mm c FRONT ELEVTION Net weight (approx.) UM 70V 5 584 473 12 kg UM 100V 775 584 473 12 kg UM 1V 775 774 697 19 kg UM 2V 1156 774 697 19 kg 9
Unimaster Dust Collectors Series UM 70-2 80 Joint line RER ELEVTION SIDE ELEVTION POSITION OF OPTIONL EXPLOSION RELIEF FLNGE UM 153 illustrated UM type: 72 103 153 253 70H 100H 1H 2H 70V 100V 1V 2V 72V 103V 153V 253V Dimension in mm: 76 114 171 105 114 114 171 105 114 114 171 105 76 76 133 67 If a vent duct is not connected to the explosion relief flange, then a minimum clearance of 0 mm should be made to the rear of the collector to ensure efficient operation of the explosion venting process. Consideration should be given to the local surrounding area in regards to the pressure and flame effects. 80 152 (UM 100) 209 (UM 1) 143 (UM 2) 548 (UM 100 and 1) 614 (UM 2) 468 (UM 100 and 1) 2 (UM 2) 100 RER ELEVTION SIDE ELEVTION POSITION OF OPTIONL EXPLOSION RELIEF FLNGES FOR SCK TIPPING UNITS UM 1STU illustrated If vent ducts are not connected to the explosion relief flanges, then a minimum clearance of 0 mm should be made to the rear of the collector to ensure efficient operation of the explosion venting process. Consideration should be given to the local surrounding area in regards to the pressure and flame effects. 10
Unimaster Dust Collectors Series UM 70-2 51 3 pitches @ 130 mm 51 74 4 pitches @ 130 mm 74 44 20 44 20 20 20 3 pitches @ 1 mm 468 548 3 pitches @ 1 mm 468 548 44 452 44 628 532 708 UM 70 UM 100 and 1 59.5 7 pitches @ 1 mm 59.5 27 20 20 4 pitches @ 130 mm 534 614 27 1024 1104 UM 2 OPTIONL EXPLOSION RELIEF FLNGE MOUNTING DETILS ll vertical holes drilled 10 mm for M8 bolts. ll horizontal holes threaded to accept M8 bolts. 11
www.donaldson.com Humberstone Lane Thurmaston Leicester LE4 8HP England Tel +44 (0)116 269 6161 Fax +44 (0)116 269 3028 Email: IFS-uk@emea.donaldson.com Research Park Zone 1 Interleuvenlaan 1-3001 Leuven (Heverlee) elgium Tel +32 (0)16 383 970 Fax +32 (0)16 383 938 Email: IFS-europe@emea.donaldson.com