TWO DECADES OF DEDICATION TO EXCELLENCE, QUALITY & DOMINATING PERFORMANCE

TWO DECADES OF DEDICATION TO EXCELLENCE, QUALITY & DOMINATING PERFORMANCE

COMPANY INTRO The roots of Speedwerx go back to the 80 s and 90 s, when owner Steve Houle was designing and building parts for his own race sleds. His innovative ideas spoke for themselves as he proved to be a dominating force in snowmobile racing, winning many races and multiple world championships along the way. Soon other competitors and consumers were asking for their own race-proven parts, and that led to the creation of the Hot Seat Performance brand in 1994, and the Speedwerx brand in 1999. For over 20 years, the Speedwerx family has been committed to winning. Whether it is on the race track with our own machines, or helping our customers achieve their goals with our products, Speedwerx is a proven winner in many different racing disciplines including Snowmobiles, ATV s, UTV s, PWC s, and our newest venture, Dirt Track Racing Cars. With 69 World and National titles, 24 X-Games Medals (10 Gold!), and Thousands of trips to Victory Lane, Speedwerx is known and respected worldwide as an industry icon that sets the bar when it comes to performance, quality, and service. The staff here at Speedwerx takes pride in our work and the products we manufacture. Most of our products are made right here in the USA and we feel that this is as important to our customers as it is to us. Our products are designed to perform in the toughest and most demanding conditions, and are thoroughly tested with thousands of laps on the track and thousands of miles on the trails and in the backcountry every year. If you re searching for the best performing and highest quality parts for your Arctic Cat Snowmobile, ATV, UTV, or your Dirt Track Race Car, look no further than Speedwerx. So go ahead and page through the new catalog. If you have any questions please let us know right away. We can be reached via phone @ 651-982-6020 from 8-5 M-F CST, we are also available via email at tech@speedwerx.com. Don t forget to check out our new website as well at www.speedwerx.com There you can order online, check for product updates and get technical support as well. Thank you for choosing Speedwerx! OUR NEW WEBSITE You may have noticed that we re-designed our website. If not, check it out today! We will have special deals on the hottest performance products available. There are also tons of videos and resources for you to browse. Be sure to friend us on facebook and follow us on twitter to stay in touch with us. GET SOCIAL WITH US Like us, friend us, follow us... Stay connected with Speedwerx, Inc. www.speedwerx.com SIGN-UP TO GET NEWS!

SEASON HIGHLIGHTS X-GAMES SNO-X TUCKER HIBBERT X-GAMES HILL-X RYAN SIMONS X-GAMES 2016 QUALIFIER WES SELBY ISOC PRO OPEN NATIONAL SNO-X POINTS TUCKER HIBBERT ISOC PRO OPEN SNO-X NATIONAL WINS 13 TUCKER HIBBERT ISOC PRO LITE SNO-X NATIONAL WINS 2 COREY WATKINSON, TYLER ADAMS CSRA PRO OPEN NATIONAL SNO-X POINTS LEE BUTLER CSRA PRO OPEN NATIONAL SNO-X WINS 5 LEE BUTLER, DAVE JONAS RMSHA HILL CLIMB NATIONAL WINS 8 DAVID MCCLURE, KYLE TAPIO, JEREMY ARCHIBALD RMSHA HILL CLIMB 600 IMP. NATIONAL POINTS DAVID MCCLURE MIRA ENDURO TRIPLE CROWN CADERETTE RACING MIRA SOO I-500 BRIAN DICK & WES SELBY ARCTIC CAT / CHRISTIAN BROTHERS RACING USXC PRO STOCK NATIONAL WINS 7 WES SELBY, ZACH HERFINDAHL USXC PRO OPEN NATIONAL WINS 7 WES SELBY, ZACH HERFINDAHL USXC PRO STOCK NATIONAL POINTS ZACH HERFINDAHL USXC PRO OPEN NATIONAL POINTS ZACH HERFINDAHL OLD FORGE SHOOT OUT 800 TRAIL MOD TOP SPEED RON GILLAND STOCK 800 GRASS DRAGS UNDEFEATED SEASON RON GILLAND STOCK 800 GRASS DRAGS WORLD CHAMPION RON GILLAND WORLD RECORD ET 800 STOCK 5.11 RON GILLAND NSRA POINTS STOCK 800 RON GILLAND NSRA POINTS STOCK 1000 RON GILLAND NSRA STOCK DRIVER OF THE YEAR RON GILLAND NSRA POINTS STOCK 700 JADE GILLAND NSRA POINTS HEAVY MOD 600 JADE GILLAND NSRA MULTIPLE WINS RON GILLAND, JADE GILLAND SNOWMOBILE PERFORMANCE SEASON HIGHLIGHTS / GET CONNECTED 1 4000 MODELS HOT PRODUCTS 2 6000 MODELS HOT PRODUCTS 3 6000 R SX MODELS HOT PRODUCTS 4 7000 MODELS HOT PRODUCTS 5 800/8000 MODELS HOT PRODUCTS 6-7 9000/1100 MODELS HOT PRODUCTS 8-9 2-STROKE EXHAUST: SINGLE PIPES / Y-PIPES 10 2-STROKE EXHAUST: LIGHTWEIGHT MUFFLERS 11 4-STROKE EXHAUST 12 FUEL CONTROL 14 ECU RE-MAPPING / TIMING KEYS 15 HYPERSHIFT CLUTCH KITS 16-17 CLUTCHING COMPONENTS 18-19 HYPERSHIFT HELIXES 20 SPEEDWERX H5 CLUTCH SPRINGS 21 DRIVE BELTS 22 STEALTH HEAD MOD KIT 22 BIG BORE KITS 23 INTAKE PERFORMANCE 24-25 MACHINE SERVICES 26-27 SPROCKETS & CHAIN 28-29 SPECIALTY TOOLS 30-31 ATV/UTV PERFORMANCE SUPER CHARGERS KITS 32 CLUTCH HOUSING BLOWER KIT 33 WET CLUTCH DELETE KIT 33 ATV & UTV EXHAUST 34 HYPERSHIFT CLUTCH KITS 35 HYPERSHIFT CLUTCHING COMPONENTS 36-38 ECU RE-PROGRAMMING 38 FUEL CONTROL 39 K&N AIR AND OIL FILTERS 40 SPECIALTY TOOLS 41 AUTOMOTIVE PERFORMANCE PERFORMANCE HEADERS 42 HEADER PARTS 43 MERGE CONTROLLERS / MANDREL BENDS 44-45 NECESSITIES APPAREL & GEAR 46 COMPANY POLICY 48 FAX-IN ORDER FORM 49

SNOWMOBILE ATV / UTV AUTOMOTIVE ZR 4000 // HOT PRODUCTS STAGE 1 KIT AC4000M ZR 4000 KIT - STAGE I KIT CONSISTS OF THESE COMPONENTS PART # PRICE 2015 ZR 4000 Clutch Kit CKA4000 $189.95 2016 ZR 4000 Clutch Kit CKA4000-3 $399.95 3.5 Flywheel/Timing Key ACFKL3.5 $21.00 Standard Lightweight Muffler (Painted Black) AC4000M $319.95 L2 Series Lightweight Muffler (Ceramic Coated) AC4000M-2 $379.95 PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT $504.95 LIGHTWEIGHT MUFFLERS Weight is horsepower! This newly designed lightweight muffler sheds weight without sacrificing reliability or performance. Our muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware. No EFI changes required. PART # DESCRIPTION WEIGHT SAVINGS PRICE AC4000M Standard Style (Stock Like Sound Levels) Black Painted 6 lbs. $319.95 AC4000M-CC Standard Style (Stock Like Sound Levels) Ceramic Coated 6 lbs. $379.95 AC4000M-2 L2 Series (Light & Loud) Ceramic Coated 8 lbs. $379.95 HYPERSHIFT CLUTCH KITS You can expect to see improved acceleration and response with our kits. Most kits come with our H5 alloy clutch springs, machined adjustable weights and a compound or progressive radius helix. Kit components depend on application. CKA4000 CKA4000 2015 ZR 4000 (Trail/Cross Country) $189.95 CKA4000-2 2015 ZR 4000 (Sno-X) $189.95 CKA4000-3 2016 ZR 4000 (Trail/Cross Country) $399.95 CKA4000-4 2016 ZR 4000 (Sno-X) $399.95 CKA4000-5 2016 ZR 4000 (Sno-X Limited/Novice 50% Throttle) $399.95 CKA4000-6 2016 ZR 4000 (Sno-X Transition 50% Throttle & ECU) $399.95 TIMING KEY Increase acceleration and throttle response and gain 3-4 hp. Requires 91+ octane premium pump fuel. ACFKL3.5 3.5 Flywheel/Timing Key $21.00 PANEL VENT KIT Cooler under the hood temperatures = more hp and longer belt life. SW-901 Side Panel Vent Kit $209.95 4TH WHEEL KITS These kits are suggested for studded and racing applications. Kit improves rigidity and stability with studs. SPX4WK 2015-2016 RR Models (New & Improved) $299.95 SPX4WK-4 2015-2016 LXR Models $185.00 SPX4WK 2 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

ZR/XF/M 6000 // HOT PRODUCTS AC6000M-2 LIGHTWEIGHT MUFFLERS Weight is horsepower! This lightweight muffler sheds weight without sacrificing reliability or performance. Our muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware. No EFI changes required. If you are looking for the lightest and loudest muffler for your sled, than our L2 series muffler is for you! AC6000M PART # DESCRIPTION WEIGHT SAVINGS PRICE AC6000M Standard Style (Stock Like Sound Levels) Black Painted 10 lbs. $319.95 AC6000M-CC Standard Style (Stock Like Sound Levels) Ceramic Coated 10 lbs. $379.95 AC6000M-2 L2 Series (Light & Loud) Ceramic Coated 15 lbs. $379.95 HYPERSHIFT CLUTCH KITS You can expect to see improved acceleration and response with our kits. Most kits come with our H5 alloy clutch springs, machined adjustable weights and a compound or progressive radius helix. Kit components depend on application. CKA6000 CKA6000 2014-2015 ZR/XF 6000 $299.95 CKA6000-2 2014-2015 XF High Country/M 6000 $299.95 CKA6000-3 2016 ZR/XF 6000 $399.95 CKA6000-4 2016 XF High Country/M 6000 $399.95 PANEL VENT KIT Cooler under the hood temperatures = more hp and longer belt life. SW-901 Side Panel Vent Kit $209.95 MANUAL CHAIN TENSIONER KIT Designed for the most extreme and hard/aggressive riding conditions. ACMCT Manual Chain Tensioner Kit $129.95 HIGH FLOW INTAKE More air and cooler air gives you more power and performance. No EFI changes needed. AC800HFI AC800HFI High Flow Air Intake Vents $25.99 4TH WHEEL KITS These kits are suggested for studded and racing applications. Kit improves rigidity and stability with studs. SPX4WK SPX4WK 2015-2016 RR Models (New & Improved) $299.95 SPX4WK-4 ZR 129 Models $185.00 SPX4WK-5 ZR 137 /XF Models $TBD Shop online 24/7 Join our e-mail list online to receive our newsletter! 3

SNOWMOBILE ATV / UTV AUTOMOTIVE ZR 6000 R SX (SNO-X RACE SLED) // HOT PRODUCTS SNO-X MOD KIT This is the exact same kit and technology that was used to dominate the ISOC pro-open class, the winter x-games and multiple drag races around the mid-west since 2012. This same race winning reliability and performance is available to you over the counter. This kit is based off of the 2009-2016 stock Arctic Cat 600 Sno Pro engine. Kit includes: Our custom race twin pipe kit, billet head inserts, complete Hypershift clutch kit with our H5 alloy clutch springs, carb boring, crank case stuffing, crankshaft true and weld, cdi remapping and cylinder porting. We also provide you with baseline jetting specs. 2013+ models do not come with all of the parts listed due to rule changes. 2011-2012 MODELS: 160+ HP @ 8700-9000 RPM WITH A VERY STRONG OVERALL POWERBAND. 2013+ MODELS: Call for more information due to rule changes. AC612SX 2012 Speedwerx 600 SNO-X Mod Kit $3292.00 AC613SX 2013-2015 Speedwerx 600 SNO-X Mod Kit $2175.00 AC616SX 2016 Speedwerx 600 SNO-X Mod Kit $2175.00 NOTE: Labor for tear down and clean up is extra. WORLD DOMINATION KIT This is the same kit used by the T-Train Tucker Hibbert #68 to win the 2010 & 2012 FIM World SNO-X Championship. This same world championship winning performance is available to you exclusively from Speedwerx. This kit works on 2009-2016 Arctic Cat 600 Sno Pro models. Kit includes cylinder porting, crank case stuffing, carb boring, and Hypershift clutch kit. This kit it is designed to run on 91+ octane premium pump fuel for trail use or a 110 / 92 octane mix for racing. You can use the Speedwerx World Domination Kit for trail riding, cross country or sno-x applications. Please specify your type of use on this kit so we can match you up with the best clutching set-up for your application. PART# DESCRIPTION PRICE AC600WDK Speedwerx 600 Sno Pro World Domination Kit See Breakdown Below AC611SX KIT BREAKDOWN: SPD-PORT-R Speedwerx Porting - Best in the industry. Period. $500.00 (Per Cylinder) SPXCCS Speedwerx Complete Crank Case Stuffing To Proper Specifications $950.00 HSP-CARB2 Speedwerx Boring Of Your Rack-Style Carburetors $250.00 (Plus Labor) Hypershift Clutch Kit Depends on application - SNO-X / Cross-Country / Trail $179.95 - $399.95 AC600WDK WHEEL KITS 4TH WHEEL KIT These kits are suggested for cross-country racing and/or trail conversion applications. Kit comes complete with lightweight aluminum axle, lightweight aluminum spacers, idler wheels, all necessary mounting hardware and full installation instructions. SPX4WK SPX4WK 2008-2016 600 Sno Pro 4th Wheel Kit (New & Improved) $299.95 BILLET IDLER WHEELS These wheels were designed and intended for the hardest and toughest riders. The stock wheels can break and fail during races. These billet aluminum wheels are much stronger than stock and will not fail. We have ran them for several sno-x seasons without replacing them. Plus they look trick. ACBW 2006-2014 500 & 2006-2011 600 Sno Pro Models - Billet Idler Wheels $89.00ea. ACBW-2 2012-2016 600 Sno Pro Models - Billet Idler Wheels $89.00ea. ACBW LIGHTWEIGHT MUFFLER Weight is horsepower! This lightweight muffler sheds weight without sacrificing reliability or performance. Our muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware. If you are looking for the lightest and loudest muffler for your sled, than our L2 series muffler is for you! AC600M-4 2012-2016 600 Sno-Pro Standard Style (Black Painted) $319.95 AC600M-4-CC 2012-2016 600 Sno Pro Standard Style (Ceramic Coated) $379.95 AC600M-5 2012-2016 600 Sno Pro L2 Series (Light & Loud) Ceramic Coated $379.95 AC600M-3 87 OCTANE HEAD KIT Tested and designed for the extreme conditions of the Iron dog cross-country race, these heads will also work for trail applications. For riders who want to trail ride their 600 Sno Pros and not have to worry about getting premium fuel -- these heads are for you. Speedwerx will provide jetting and clutching specs to complete this set-up. There is a small power loss due to the lower compression but it is not noticeable. NOTE: Works on 2009-2016 carbureted models only. AC609BH-87D 2009-2016 600 Sno Pro 87 Octane Domes $129.95ea AC609BH-87D 4 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

ZR/XF 7000 // HOT PRODUCTS LIGHTWEIGHT MUFFLERS Weight is horsepower! This lightweight muffler sheds weight without sacrificing reliability or performance. Our muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware. No EFI changes required. If you are looking for the lightest and loudest muffler for your sled, than our L2 series muffler is for you! PART # DESCRIPTION HP GAIN WEIGHT SAVINGS PRICE AC7000M Standard Style (Stock Like Sound Levels) Stainless Steel +8 HP 3 lbs. $499.95 AC7000M-2 L2 Series (Light & Loud) Ceramic Coated +8 HP 8 lbs. $379.95 HYPERSHIFT CLUTCH KITS You can expect to see improved acceleration and response with our kits. Most kits come with our H5 alloy clutch springs, machined adjustable weights and a compound or progressive radius helix. Kit components depend on application. CKA7000 2014-2015 ZR/XF 7000 $299.95 CKA7000-2 2016 ZR/XF 7000 $399.95 CKA7000 PANEL VENT KIT Cooler under the hood temperatures = more hp and longer belt life. SW-901 Side Panel Vent Kit $209.95 MANUAL CHAIN TENSIONER KIT Designed for the most extreme and hard/aggressive riding conditions. ACMCT Manual Chain Tensioner Kit $129.95 4TH WHEEL KITS These kits are suggested for studded and racing applications. Kit improves rigidity and stability with studs. SPX4WK 2015-2016 RR Models (New & Improved) $299.95 SPX4WK-4 ZR 129 Models $185.00 SPX4WK-5 ZR 137 /XF Models $TBD SPX4WK Shop online 24/7 Join our e-mail list online to receive our newsletter! 5

SNOWMOBILE ATV / UTV AUTOMOTIVE ZR/XF/M 800/8000 // HOT PRODUCTS SPEEDWERX PROCHARGER SUPERCHARGER KIT For years Speedwerx has been leading the industry in snowmobile performance and this kit takes it to a completely new level. We have developed a complete supercharger kit for the Arctic Cat 800cc sleds using a top of the line supercharger from ProCharger, one of the industry leaders in superchargers. Our kit comes complete with everything needed for a complete install with a few options to choose from. This kit makes 225 hp on premium pump gas from sea level to 13,000 ft. Please call for race gas applications. No chassis modifications are needed to install the kit. New for 2016 our kits will include a water to air intercooler set-up and cogged pulleys and belt. With our new water to air intercooler set-up you can expect to see 80 F charge temps on average during a typical mountain riding day. PART # APPLICATION PRICE ACSC-800-12-WAC 2012-2015 XF/M 800/8000 Models $7500.00 ACSC-800-16-WAC 2016 XF/M 8000 Models $7500.00 ADVANTAGES OF THE SPEEDWERX PROCHARGER SUPERCHARGER KIT: - No lag (Best throttle response you ve ever seen in the mountains) - Stock-like sound levels with our standard muffler - Self contained oiling system (No tanks or pumps to worry about) - Lower under-hood temps compared to a turbo set-up - Low charge temps (80 F on average in mountain riding conditions) - Instant throttle response - Best fuel controller on the market with 4D mapping - No chassis mods required - Only 5-10 lbs. heavier than stock after install (Depends on muffler option) - Made in the USA KIT INCLUDES: - Speedwerx Full Supercharger Exhaust System - Speedwerx Clutch Kit With Machined Adjustable Weights & H5 Alloy Springs - Larger Injectors (Plug & Play) - Cold Air Intake - Power Commander PCV Fuel Controller With 4D Mapping - ProCharger Supercharger - Complete Mounting Brackets & Hardware - Pulleys & Drive Belt - High Flow Aluminum Charge Box & Charge Tubes - Water To Air Heat Exchanger, Pump & Wiring Harness - Water To Air Intercooler ACSC-800-012-IC 012 THIS SPEEDWERX PROCHARGER SUPERCHARGER KIT COMES AS A COMPLETE BOLT-ON KIT. (APPROXIMATE INSTALL TIME IS 8 HOURS!) SUGGESTED UPGRADES: AT-200 Dynojet AFR Meter $279.99 POD-300 Dynojet Display, Data Logger & Adjuster $249.99 AC800M-8-SC L2 Series (Light & Loud) Muffler $379.95 PRO-INSTALL Speedwerx Professional Installation and Tune $1000.00 3007-873-C Stock Head Core $378.49 ACFHM-800-12:1 Stock Head Mod To 12:1 $99.95 6 Speedwerx, Inc. 651.982.6020 or or 651.982.0600 www.speedwerx.com

ZR/XF/M 800/8000 // HOT PRODUCTS EXTERMINATOR KITS Our Exterminator kits are designed to ensure our customers are running the correct combination of parts for their particular model. Not only will our kit s put you ahead of your competition, they also offer better pricing in kit form. These set-ups are designed for everyday type riding and in most applications run on premium pump gas. We have grouped different options of performance upgrades together to ensure our customers are looking at the correct combination of parts for their machine, giving you the confidence that you are getting the best bang for your buck. STAGE 1 KIT CONSISTS OF THESE COMPONENTS PART # PRICE Hypershift Clutch Kit CKA800-XX $185.95-$399.95 High Flow Y-Pipe AC800Y-4 $209.95 Power Commander PCV Fuel Controller 11-004 $379.95 PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT $739.95 STAGE 2 KIT CONSISTS OF THESE COMPONENTS PART # PRICE Hypershift Clutch Kit CKA800-XX $185.95-$399.95 Single Pipe Kit (Includes Y-Pipe) AC800S-XX $719.95 Power Commander PCV Fuel Controller 11-004 $379.95 1.5 Flywheel/Timing Key ACFKL1.5 $21.00 Boyesen RAD Valves RAD53-2 $329.95 High Flow Intake Kit AC800HFI $25.99 PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT $1569.95 KITS 800/8000 MODELS STAGE 2 KIT LIGHTWEIGHT MUFFLERS Weight is horsepower! This lightweight muffler sheds weight without sacrificing reliability or performance. Our muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware. No EFI changes required. If you are looking for the lightest and loudest muffler for your sled, than our L2 series muffler is for you! AC800M-8 PART # DESCRIPTION WEIGHT SAVINGS PRICE AC800M-7 Standard Style (Stock Like Sound Levels) Black Painted 10-11 lbs. $319.95 AC800M-7-CC Standard Style (Stock Like Sound Levels) Ceramic Coated 10-11 lbs. $379.95 AC800M-8 L2 Series (Light & Loud) Ceramic Coated 15-16 lbs. $379.95 AC800M-7 HYPERSHIFT CLUTCH KITS You can expect to see improved acceleration and response with our kits. Most kits come with our H5 alloy clutch springs, machined adjustable weights and a compound or progressive radius helix. Kit components depend on application. CKA800-6 2012-2015 ZR/XF 800/8000 $299.95 CKA800-7 2012-2015 XF High Country/M 800/8000 $185.95 CKA800-8 2016 ZR/XF 8000 $399.95 CKA800-9 2016 XF High Country/M 8000 $399.95 CKA800-6 MANUAL CHAIN TENSIONER KIT Designed for the most extreme and hard/aggressive riding conditions. ACMCT Manual Chain Tensioner Kit $129.95 4TH WHEEL KITS These kits are suggested for studded and racing applications. Kit improves rigidity and stability with studs. SPX4WK 2015-2016 RR Models (New & Improved) $299.95 SPX4WK-4 ZR 129 Models $185.00 SPX4WK-5 ZR 137 /XF Models $TBD SPX4WK Shop online 24/7 Join our e-mail list online to receive our newsletter! 7

SNOWMOBILE ATV / UTV AUTOMOTIVE ZR/XF/M 9000 (1100 TURBO) // HOT PRODUCTS Our Exterminator kits are designed to ensure our customers are running the correct combination of parts for their particular model. Not only will our kit s put you ahead of your competition, they also offer better pricing in kit form. These set-ups are designed for everyday type riding and in most applications run on premium pump gas. We have grouped different options of performance upgrades together to ensure our customers are looking at the correct combination of parts for their machine, giving you the confidence that you are getting the best bang for your buck. STAGE 1 KIT 9000 & 1100 TURBO KIT - STAGE I KIT CONSISTS OF THESE COMPONENTS PART # PRICE Single Stage ECU Re-Mapping RPI-1100T $400.00 Hypershift Clutch Kit CKA1100T-XX $269.95-$399.95 L2 Series Lightweight Muffler AC1100TM-2 $379.95 Insulated Heat Tape / Panel Insulation HT1X3 $150.00 Side Panel Vent Kit SW-901 $209.95 PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT $1339.95 STAGE 2 KIT 9000 & 1100 TURBO KIT - STAGE II KIT CONSISTS OF THESE COMPONENTS PART # PRICE 4 Stage Multi-Map ECU Re-Mapping RPI-1100T-M $600.00 Hypershift Clutch Kit CKA1100T-XX $269.95-$399.95 L2 Series Lightweight Muffler AC1100TM-2 $379.95 Insulated Heat Tape / Panel Insulation HT1X3 $150.00 Side Panel Vent Kit SW-901 $209.95 Aluminum Charge Tubes AC1100TCTK $269.95 PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT $1779.95 9000 & 1100 TURBO KIT - STAGE III - RACE GAS KIT CONSISTS OF THESE COMPONENTS PART # PRICE 4 Stage Multi-Map ECU Re-Mapping RPI-1100T-M $600.00 Hypershift Clutch Kit CKA1100T-XX $269.95-$399.95 L2 Series Lightweight Muffler AC1100TM-2 $379.95 Header Down Pipe - Stainless Steel AC1100TDP $439.95 Insulated Heat Tape / Panel Insualtion HT1X3 $150.00 Side Panel Vent Kit SW-901 $209.95 Aluminum Charge Tubes AC1100TCTK $269.95 Head Stud Kit Z1THSK $183.75 PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT $2369.95 STAGE 3 KIT 8 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

ZR/XF/M 9000 (1100 TURBO) // HOT PRODUCTS ECU MAPPING This is as simple as it gets for adding serious HP to your 9000/1100 Turbo. We have developed our own software that allows us to reprogram the stock ECU and adjust fuel, boost limits, timing, rev limiter and waste gate activation/deactivation RPM. With this software there are no limits to what we can do to unleash the most power from your 1100 Turbo. All of these great features allow us to produce up to 290+ HP with the stock turbo. It also allows us to make up to 240 HP on premium pump gas all while improving the fuel mileage by up to 2 gallons per tank compared to stock. So over time the mapping will pay for itself! ECU boxes that are sent in will be remapped within 1 business day for a fast and speedy turn around. For those that cannot wait, we have core boxes on hand ready to be sent out. ECU mapping is available in 2 different forms. Our single map version where we can put any single map in your box, or our multi map function that allows us to run up to 4 different maps at one time and you can select on the go (real-time) which map you would prefer to run. Both set-ups look stock and can easily be hidden from your competition. MAPS AVAILABLE: (NOTE: ALL HP CLAIMS ARE WITH AN INTAKE TEMPERATURE OF 100 F AND HIGHER! NORMAL OPERATION IS 60 F!) 87 OCTANE SAFE TRAIL MAP 177 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER 91 OCTANE SAFE TRAIL MAP 210 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (IMPROVES FUEL MILEAGE OVER STOCK) 91 OCTANE SAFE TRAIL MAP 240 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (IMPROVES FUEL MILEAGE OVER STOCK) 110+ OCTANE LAKE RACE MAP 260 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (REQUIRES HEAD STUD KIT!) 114+ OCTANE DRAG RACE MAP 290+ HP W/ SPEEDWERX WASTE GATE MOD (REQUIRES HEAD STUD KIT!) RPI-1100T 2012-2016 Single Map ECU Re-Program $400.00 RPI-1100T-M 2012-2016 4 Stage Mulit-Map (Includes mapping and map selector switch assembly) $600.00 Z1WGM 2009-2016 Models - Waste Gate Modification For 290 HP Level $34.95 NOTE: You must send your ECU box to us for remapping or call and arrange for an exchange! LIGHTWEIGHT MUFFLERS Our lightweight mufflers are designed to improve performance and overall power all while reducing weight. These systems offer a different sound with stock-like runability without any EFI changes. For the 1100 Turbo/9000 models we are only offering our L2 series muffler because it has the same sound as our older standard version muffler due to the turbo reducing most of the exhaust noise. The L2 series is also lighter and runs cooler since the exhaust doesn t have to stay in the muffler as long before it exits the machine. AC1100TSP PART # DESCRIPTION HP GAIN WEIGHT SAVINGS PRICE AC1100TM-2 L2 Series (Light & Loud) Ceramic Coated +10 HP 10 lbs. $379.95 AC1100TSP Straight Pipe (Stainless Steel) +10 HP 20 lbs. $259.95 AC1100TM-2 HYPERSHIFT CLUTCH KITS You can expect to see improved acceleration and response with our kits. Most kits come with our H5 alloy clutch springs, machined adjustable weights and a compound or progressive radius helix. Kit components depend on application. CKA1100T 2012-2015 F/ZR/XF 1100 Turbo/9000 $269.95 CKA1100T-2 2012-2015 XF High Country/M 1100 Turbo/9000 $299.95 CKA1100T-3 2016 ZR/XF 9000 $399.95 CKA1100T-4 2016 XF High Country/M 9000 $399.95 CKA1100T-2 PANEL VENT KIT Cooler under the hood temperatures = more hp and longer belt life. SW-901 Side Panel Vent Kit $209.95 CHARGE TUBE KIT Our charge tube kit is made from thin wall 18-gauge.049 aluminum. It is designed to help dissipate heat quicker than the stock tubes and other thicker walled aluminum tubes on the market. It is also more durable under higher boost pressures than the stock rubber hoses. Tubes come polished for a great look. AC1100TCTK 2012-2016 1100 Turbo/9000 Models $269.95 Shop online 24/7 Join our e-mail list online to receive our newsletter! 9

SNOWMOBILE ATV / UTV AUTOMOTIVE 2-STROKE EXHAUST //SINGLE PIPES & Y-PIPES FAT DADDY SINGLE PIPES ABOUT OUR EXHAUSTS: All of our Fat Daddy single pipes undergo countless hours of testing and development combined with hours of design and fitting. We have taken the time necessary to produce the best single pipes for your machines. Here are some of the key benefits to using our single pipes: STRAIGHT-UP USA HORSEPOWER Every pipe is designed, DYNO tested and then field tested to produce real, accurate and reliable horsepower gains. Our pipes are not built for one run across the lake or on the trail. Our pipes are built to last and our pipes work! CERAMIC COATING All of our single pipes come with a long lasting finish that offers a great look while also acting as a thermal barrier to keep heat inside the pipe for optimum performance. LIGHTWEIGHT All of our single pipes are lighter than the stock system. You can expect an average weight savings of 5 lbs. GREAT FIT All single pipes are designed to run into the stock muffler for simple installation. QUIET You can expect stock sound levels while using the stock muffler. DETAILED INSTRUCTIONS Each single pipe comes complete with a full instruction/set-up sheet which includes jetting specifications if needed, clutch set-up suggestions, as well as full installation instructions. ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS PART # PRICE 800 F / M / XF Procross/Proclimb (0-5,000 Ft.) 12-16 9-10 5 lbs. AC800S-9 $719.95 800 F / M / XF Procross/Proclimb (5,000 Ft.+) 12-16 9-10 5 lbs. AC800S-10 $719.95 *800 F / M / XF Procross/Proclimb Models 12-16 9-10 5 Lbs. AC800S-ADJ-2 $885.95 800 Crossfire / Crossfire R 8 (0-5,000 Ft.) 10-11 9 5 lbs. AC800S-5 $719.95 800 Crossfire / Crossfire R 8 (5,000 Ft.+) 10-11 9 5 lbs. AC800S-8 $719.95 *800 Crossfire / Crossfire R 8 10-11 9 5 lbs. AC800S-ADJ $885.95 800 M-Series M8 / HCR (0-5,000 Ft.) 10-11 9 5 lbs. AC800S-5 $719.95 800 M-Series M8 / HCR (5,000 Ft.+) 10-11 9 5 lbs. AC800S-8 $719.95 *800 M-Series M8 / HCR 10-11 9 5 lbs. AC800S-ADJ $885.95 800 Speedwerx Sno Pro Big Bore (0-5,000 Ft.) 08-11 N/A N/A AC6/800S $719.95 800 Speedwerx Sno Pro Big Bore (5,000 Ft. +) 08-11 N/A N/A AC6/800S-2 $719.95 *925 Speedwerx Big Bore 800 F/M/XF 12-16 N/A 5 Lbs. AC925S-ADJ-2 $885.95 1000 Crossfire / Crossfire R 1000 07-11 16-17 5 lbs. AC1000S-4 $719.95 1000 M-Series M1000 07-11 16-17 5 lbs. AC1000S-4 $719.95 * Adjustable pipe kit features 2 stinger options for different elevations. AC800S-5 GET THE POWER TO THE GROUND: When adding horsepower to your machine it is very important to be running at the proper RPM! For best results we highly suggest the use of one of our Hypershift clutch kits. SEE PAGES 16-17 FOR MORE DETAILS. AC800S-ADJ ONE STINGER INSTALLED & ONE STINGER LOOSE ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS PART # PRICE 600 Crossfire / F-Series / M-Series 07-11 N/A AC600Y $209.95 800 Crossfire / Crossfire R / F-Series / M-Series 07-16 4 AC800Y-4 $209.95 1000 Crossfire / F-Series / M-Series 07-11 7-8 AC1000Y $209.95 AC800Y-4 10 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

2-STROKE EXHAUST // MUFFLERS SPEEDWERX L 2 COMPETITION SERIES MUFFLERS (LIGHT & LOUD) The new L2 Series muffler is designed to be lighter and louder than our original lightweight muffler. You will see up to a 15 pound weight savings! These are made from mild steel and they are ceramic coated. Disclaimer: Designed for competition use only! Speedwerx, Inc. is not responsible for the performance or noise of these exhaust systems. These exhaust systems are designed to be lighter and louder than our original lightweight muffler systems. The mufflers are suggested to be used for closed course racing only. ARCTIC CAT MODEL YEAR WEIGHT SAVINGS PART # PRICE 800 F / M / XF Models 2012-16 15 lbs. AC800M-8 $379.95 800 M / XF Models 2010-2011 15 lbs. AC800M-10 $379.95 6000 Models 2014-16 15 lbs. AC6000M-2 $379.95 4000 Models 2015-16 8 lbs. AC4000M-2 $379.95 600 SP Models 2012-16 9 lbs. AC600M-5 $379.95 Please Note: 800 models only; + 200 RPM above 5000 elevation. AC800M-8 STANDARD LIGHTWEIGHT MUFFLERS Our lightweight mufflers cut anywhere from 3 to 12 pounds depending on model! All of our mufflers are designed to reduce weight while keeping sound levels as low as possible. Our mufflers have more bark than stock units but we try not to make them too obnoxious. In other words, they won t blow you off of your seat! Some of our mufflers are even quieter than stock. Our 2010-2016 800 mufflers are 4-6 decibels quieter than OEM @ 4000 RPM! We always have performance on our minds and our mufflers will either perform the same or better than the stock system. Our mufflers utilize the stock outlet location and require no major chassis modifications for installation. All mufflers come standard painted with a hi-temp black paint and most mufflers come with installation instructions if needed. ARCTIC CAT MODEL YEAR WEIGHT SAVINGS PART # PRICE CERAMIC PART # PRICE 500 Sno Pro 10-14 3 lbs. AC600M-3 $319.95 AC600M-3-CC $379.95 600 F-Series 6 07-11 4 lbs. AC600M $319.95 AC600M-CC $379.95 600 M-Series M6 05-11 4 lbs. AC600M-2 $319.95 AC600M-2-CC $379.95 600 Sno Pro 08-11 3 lbs. AC600M-3 $319.95 AC600M-3-CC $379.95 600 Sno Pro 12-16 3 lbs. AC600M-4 $319.95 AC600M-4-CC $379.95 800 F / M / XF Procross / Proclimb 12-16 11 Lbs. AC800M-7 $319.95 AC800M-7-CC $379.95 800 Crossfire / Crossfire R 8 10-11 10-11 lbs. AC800M-5 $319.95 AC800M-5-CC $379.95 800 F-Series 8 10-11 4 lbs. AC800M-4 $319.95 AC800M-4-CC $379.95 800 M-Series M8 / HCR 10-11 10-11 lbs. AC800M-5 $319.95 AC800M-5-CC $379.95 1000 Crossfire / Crossfire R 1000 07-11 11 lbs. AC1000M-2 $319.95 AC1000M-2-CC $379.95 1000 M-Series M1000 07-11 11 lbs. AC1000M-2 $319.95 AC1000M-2-CC $379.95 4000 Models 15-16 6 lbs. AC4000M $319.95 AC4000M-CC $379.95 6000 Models 14-16 10 lbs. AC6000M $319.95 AC6000M-CC $379.95 AC800M-5 AC800M-7 Shop online 24/7 Join our e-mail list online to receive our newsletter! 11

SNOWMOBILE ATV / UTV AUTOMOTIVE 4-STROKE EXHAUST COMPONENTS // AC1100TEX AC1100TDP 9000 / 1100 TURBO STAINLESS STEEL DOWN PIPE Our new down pipe design has a better merge and blends better from the waste gate to the exhaust. This allows for more overall performance and horsepower. The Speedwerx 1100 turbo down pipe is intended for 240+ HP set-ups only! This down pipe will not work properly on models running less then 240 HP. ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS PART# PRICE 9000 / 1100 Turbo F / M / XF 2012-2016 +5 HP -2 Lbs. AC1100TDP $439.95 9000 / 1100 TURBO FULL EXHAUST SYSTEM The merged waste gate exhaust system for the 2012 1100 turbo models is a complete system from the turbo and back. You will see unmatched power and weight savings with both of these Speedwerx full exhaust kits. As always, our full exhaust kits are made right here in Minnesota, USA! ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS PART# PRICE 9000 / 1100 Turbo F / M / XF 2012-2016 +15 HP -10 Lbs. AC1100TEX $799.95 SPEEDWERX L 2 COMPETITION SERIES MUFFLERS (LIGHT & LOUD) The new L2 Series muffler is designed to be lighter and louder than our original lightweight muffler. You will see up to a 15 pound weight savings! These are made from mild steel and they are ceramic coated. Disclaimer: Designed for competition use only! Speedwerx, Inc. is not responsible for the performance or noise of these exhaust systems. These exhaust systems are designed to be lighter and louder than our original lightweight muffler systems. The mufflers are suggested to be used for closed course racing only. ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS Part # Price 9000 / 1100 TURBO 2012-2016 +10 HP -10 lbs. AC1100TM-2 $379.95 ZR 7000 2016 +8-8 lbs. AC7000M-2 $379.95 AC1100TM-2 9000 / 1100 TURBO L 2 COMPETITION SERIES STAINLESS STEEL STRAIGHT PIPE Lightest & Loudest! Our new stainless steel straight pipe is designed to be as light as possible. This system is loud and is typically used for race applications. Disclaimer: Designed for competition use only! Speedwerx, Inc. is not responsible for the performance or noise of these exhaust systems. These exhaust systems are designed to be lighter and louder than our original lightweight muffler systems. The mufflers are suggested to be used for closed course racing only. AC1100TSP ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS PART# PRICE 9000 / 1100 Turbo F / M / XF 2012-2016 +10 HP -20 Lbs. AC1100TSP $259.95 SPEEDWERX LIGHTWEIGHT MUFFLERS Our light weight mufflers for the 4 stroke machines drop up to 8-10 lbs. depending on the model. All of 4 stroke muffler systems are designed to improve power, reduce weight and keep noise levels at a minimum. In most cases our 4 stroke mufflers will add 10 hp to your machine without any fuel / efi changes required. Mufflers come standard with our high temp black finish, or you can upgrade to a ceramic coated finish. Some systems available in stainless steel as well. ARCTIC CAT MODEL YEAR HP GAIN WEIGHT SAVINGS PART# PRICE CERAMIC PART # PRICE Z1 Turbo Models 2009-11 + 10 HP -10 lbs. ACZ1TM $319.95 ACZ1TM-CC $379.95 7000 Models 2014-16 + 8 HP -3lbs. AC7000M $499.95 S/S N/A ACZ1TM 12 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

Shop online 24/7 Join our e-mail list online to receive our newsletter! 13

SNOWMOBILE ATV / UTV AUTOMOTIVE FUEL CONTROL // POWER COMMANDER PCV POWER COMMANDER FUEL CONTROLLERS The Power Commander is a fuel injection adjustment unit that plugs inline with the bike s stock ECU (electronic control unit). The PC uses original equipment style connectors, so no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and, in some cases, ignition curves via the PC s onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bike s ECU. Removing the PC returns the bike to its previous stock condition. Each unit comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file. PCV ARCTIC CAT YEAR PCV PRICE PCV PTI PRICE ZR 6000 El Tigre 2015 11-021 $379.95 TBD TBD 400/500 SP / 600/700 F / M / XF 2005-2016 11-007 $379.95 11-007PTI $449.95 ZR / XF 7000 2014-2016 11-015 $379.95 11-015PTI $449.95 800cc/1000cc Models 2009-2016 11-013 $449.95 11-013PTI $549.95 800cc/1000cc Models 2009-2016 11-004 $379.95 11-004PTI $449.95 Z1 Models (Non-Turbo) 2009-2011 11-003 $379.95 N/A N/A 9000 / 1100 Turbo 2012-2016 11-009 $379.95 11-009PTI $449.95 POWER COMMANDER V (PCV): Reduced Size (Less than half the size of PCIII) USB Powered From Computer (9 Volt Adaptor is no longer needed for programming) 2 Position Map Switching Function Built In (Map switch not included) Gear / Speed Input (Allows for map adjustment based on gear and speed) 10 Throttle Position Columns (Up from 9 on the PCIII) Enhanced Accel Pump Utility (Increased adjustment and sensitivity ranges) -100% / +250% Fuel Change Rate (Allows more adjustment range) Analog Input (Allows user to use any 0-5 volt sensor and built an adjustment table based on its input such as boost or temp.) AUTO TUNE MODULE DYNOJET IS PLEASED TO BE ABLE TO BRING YOU THE LATEST IN TUNING ACCESSORIES. WE NOW OFFER A WIDE BAND AUTO TUNE KIT THAT CAN BE USED WITH ANY POWER COMMANDER V. AT-200 The Dynojet Auto Tune Kit plugs into the PCV with a single cable. The only other connections needed are a +12 volt and a ground. With the Auto Tune Kit connected the user can specify what air/fuel ratio (how rich or lean) to make each specific RPM and throttle position % combination. This makes it possible to adjust cruise for best fuel economy as well as larger throttle openings for peak power. Dynojet includes base settings for the air/fuel ratios, but they are fully adjustable if need be. AT-200 Single Channel Single Cylinder - PCV Models Only! (Acts as an O2 Gauge!) $279.99 AT-300 Dual Channel Twin Cylinder - PCV Models Only! (Acts as a dual O2 Gauge!) $399.99 48292001 Replacement O2 Sensor for All AutoTune Kits $99.85ea POD-300 DATA VIEWER & LOGGER THE POD-300 IS AN ACCESSORY DISPLAY FOR DYNOJET DEVICES THAT SUPPORT DJ-CAN; INCLUDING THE POPULAR POWER COMMANDER V, AUTOTUNE, WIDEBAND 2, AND CMD. Simply connect the included CAN cable and you re ready to go; there s no need to tap power or deal with other messy connections. POD-300 Need to adjust your tune in the field, or datalog the supported channels to further refine your tune? No problem, with the POD-300 you re just a few clicks away from taking advantage of the many features with it s easy to use menu system. Handle Bar Mount Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio- (w/wb2 or AutoTune connected) Real time fuel adjustments Weather resistant for use in all conditions Log channels saved to internal memory and can be viewed / analyzed with Dynojet s PowerCore Software High contrast display, viewable in direct sunlight 3 Programmable light alarms Can Cable 26300062 POD Commander - 300 Data Viewer & Logger $249.99 61300062 Handle Bar mount for POD Commander - 300 Display $59.95 76950145 6 Can Cable $14.00 76950143 18 Can Cable $14.00 76950117 36 Can Cable $15.00 76950690 6 Can Cable $16.00 76950680 10 Can Cable $ CALL 76950530 20 Can Cable $ CALL 14 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

ECU RE-MAPPING // ECU BOX RE-MAPPING This is as simple as it gets for adding serious HP to your 9000/1100 Turbo. We have developed our own software that allows us to reprogram the stock ECU and adjust fuel, boost limits, timing, rev limiter and waste gate activation/deactivation RPM. With this software there are no limits to what we can do to unleash the most power from your 1100 Turbo. All of these great features allow us to produce up to 290+ HP with the stock turbo. It also allows us to make up to 240 HP on premium pump gas all while improving the fuel mileage by up to 2 gallons per tank compared to stock. So over time the mapping will pay for itself! ECU boxes that are sent in will be remapped within 1 business day for a fast and speedy turn around. For those that cannot wait, we have core boxes on hand ready to be sent out. ECU mapping is available in 2 different forms. Our single map version where we can put any single map in your box, or our multi map function that allows us to run up to 4 different maps at one time and you can select on the go (real-time) which map you would prefer to run. Both set-ups look stock and can easily be hidden from your competition. MAPS AVAILABLE: (NOTE: ALL HP CLAIMS ARE WITH AN INTAKE TEMPERATURE OF 100 F AND HIGHER! NORMAL OPERATION IS 60 F!) 87 OCTANE SAFE TRAIL MAP 177 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER 91 OCTANE SAFE TRAIL MAP 210 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (IMPROVES FUEL MILEAGE OVER STOCK) 91 OCTANE SAFE TRAIL MAP 240 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (IMPROVES FUEL MILEAGE OVER STOCK) 110+ OCTANE LAKE RACE MAP 260 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (REQUIRES HEAD STUD KIT!) 114+ OCTANE DRAG RACE MAP 290+ HP W/ SPEEDWERX WASTE GATE MOD (REQUIRES HEAD STUD KIT!) RPI-1100T 2012-2016 Single Map ECU Re-Program $400.00 RPI-1100T-M 2012-2016 4 Stage Mulit-Map (Includes mapping and map selector switch assembly) $600.00 Z1WGM 2009-2016 Models - Waste Gate Modification For 290 HP Level $34.95 NOTE: You must send your ECU box to us for remapping or call and arrange for an exchange! TIMING KEYS // ADVANCE OR RETARD TIMING TIMING KEYS EFI APPLICATIONS: Add more power to your machine with the use of these new keys. They work great to add acceleration and throttle response in many applications. Available in three different degrees. NOTE: Keys fit on all new stock Crossfire/F-Series/M-Series EFI ZR / MC / KC & 800 Procross/Proclimb models! ACFKL1.5 Advances 1.5 $21.00 ACFKL2.5 Advances 2.5 $21.00 ACFKL3.5 Advances 3.5 $21.00 ACFKL STYLE ACFK STYLE CARB APPLICATIONS: Add even more power with the use of 1, 2, or 3 degree advanced flywheel keys. Especially if you have a ZR and want to have the extra power like the Mountain Cat CDI boxes have. ACFK1 Advances 1 $21.00 ACFK2 Advances 2 $21.00 ACFK3 Advances 3 $21.00 IMPORTANT: AN ENGINE S TIMING CURVE IS A VERY IMPORTANT INGREDIENT WHEN IT COMES TO PERFORMANCE. WE OFFER TIMING KEYS FOR MOST ARCTIC CAT MODELS. IF YOU ARE NOT SURE WHICH TIMING KEY YOU NEED, PLEASE CONTACT OUR TECH LINE @ 651.982.6020! Shop online 24/7 Join our e-mail list online to receive our newsletter! 15

SNOWMOBILE ATV / UTV AUTOMOTIVE HYPERSHIFT CLUTCH KITS // SPEEDWERX HYPERSHIFT CLUTCH KITS For years Speedwerx has worked very hard to set the standard in performance clutch kits utilizing titanium springs. The springs and complete clutch kits worked perfectly but the price was hard to swallow due to the steep cost of titanium. To address the cost issue we have come up with a new spring material that we call H5 Alloy. The new H5 Alloy has a lot of the same characteristics as a titanium spring (with the exception of the weight loss) but at a fraction of the cost. We thought that would make it a little easier on our customers. These springs may be new to the consumer market, but we have been running these parts for over 9 years now! Not all kits come with the new H5 Alloy material at this time, but if you want to make sure your kit includes a spring made of the new H5 Alloy all you have to do is request it! Most of our performance clutch kits come with a new H5 Alloy drive spring, a set of our machined weights that feature a black oxide coating to prevent corrosion, one of our compound radius secondary helixes and a new H5 Alloy secondary spring. If you want a smooth yet aggressive holeshot, excellent back shifting and great throttle response, ask for the best. Ask for Speedwerx. PLEASE NOTE: Not all kits are listed! If your machine or certain application is not listed, don t worry. Our staff has years of experience and tuning knowledge to make a special kit that is perfect for you! DIAMOND DRIVE ARCTIC CAT CLUTCH KIT STANDARD ARCTIC CAT CLUTCH KIT CKAF8-6-2 - STAGE 2 KIT 2012-2015 ARCTIC DRIVE CLUTCH KIT CKA800-6 HYPERSHIFT CLUTCH KIT APPLICATION CHART ARCTIC CAT MODEL YEAR MODIFIER 0-5,000 ft. PRICE 5,000-9,999 ft. PRICE 10,000 ft. + PRICE 440 Sno-Pro 2004-2007 Pump Gas Conversion Kit CKA440PG $280.00 CALL $CALL CALL $CALL ZR 4000 2015 CKA4000 $189.95 N/A N/A ZR 4000 2015 SX CKA4000-2 $189.95 N/A N/A ZR 4000 2016 CKA4000-3 $399.95 N/A N/A ZR 4000 2016 SX CKA4000-4 $399.95 N/A N/A ZR 4000 2016 SX LTD / NOVICE 50% THROTTLE CKA4000-5 $399.95 N/A N/A ZR 4000 2016 SX TRANSITION 50% AND ECU CKA4000-6 $399.95 N/A N/A 5000 ZR LXR 2014 CKA5000 $299.00 CKA5000-HA $299.00 CKA5000-HA-1 $299.00 500 Sno Pro 2010-2014 CKA500-4 $379.95 CKA500-4-HA $379.95 CKA500-4-HA-1 $379.95 500 Sno Pro 2010-2014 With Speedwerx Single Pipe CKA500-4-S $379.95 CKA500-4-S-HA $379.95 CKA500-4-S-HA-1 $379.95 500 Sno Pro 2010-2014 SNO-X Race Kit CKA500-5 $379.95 CKA500-5-HA $379.95 CKA500-5-HA-1 $379.95 500 Sno Pro 2010-2014 SNO-X Limited (ECU & Throttle) CKA500-5-LIMITED $379.95 CKA500-5-LIMITED-HA $379.95 CKA500-5-LIMITED-HA-1 $379.95 570 F-Series 2009-2014 CKA570 $265.00 CKA570-HA $CALL CKA570-HA-1 $CALL 600 F-Series/Crossfire 2011 CKAF6-5 $CALL CKAF6-5-HA $CALL CKAF6-5-HA-1 $CALL 600 M-Series 2011 CKAM6-3 $130.00 CKAM6-3-HA $CALL CKAM6-3-HA-1 $CALL 600 Sno Pro Stock 2013 Sno-X CKA613 $235.00 CKA613-HA $CALL CKA613-HA $CALL 600 Sno Pro Mod 2013 Sno-X CKA613-2 $130.00 CKA613-2-HA $CALL CKA613-2-HA $CALL 600 Sno Pro Stock 2013 Cross-Country / Trail CKA613-3 $235.00 CKA613-3-HA $CALL CKA613-3-HA $CALL 600 Sno Pro Stock 2014 Sno-X CKA614 $329.95 CKA614-HA $CALL CKA614-HA $CALL 600 Sno Pro Mod 2014 Sno-X CKA614-2 $229.95 CKA614-2-HA $CALL CKA614-2-HA $CALL 600 Sno Pro Stock 2014 Cross-Country / Trail CKA614-3 $329.95 CKA614-3-HA $CALL CKA614-3-HA $CALL 600 SP/SX 2015 CKA615 $285.00 N/A N/A 600 SP/XC 2015 CKA615-3 $185.00 N/A N/A 600 SP/SX 2016 CKA616 $399.95 N/A N/A 600 SP/XC 2016 CKA616-3 $399.95 N/A N/A 6000 El Tigre 2015 CKA6000 $299.95 CKA6000-HA $299.00 CKA6000-HA-1 $299.00 ZR/XF 6000 2014-2015 CKA6000 $299.95 CKA6000-HA $299.95 CKA6000-HA-1 $299.95 M / XFHC 6000 2014-2015 CKA6000-2 $299.95 CKA6000-2-HA $299.95 CKA6000-2-HA-1 $299.95 ZR/XF 6000 2016 CKA6000-3 $399.95 CKA6000-3-HA $399.95 CKA6000-3-HA-1 $399.95 M / XFHC 6000 2016 CKA6000-4 $399.95 CKA6000-4-HA $399.95 CKA6000-4-HA-1 $399.95 7000 XF / ZR 2014-2015 CKA7000 $299.95 CKA7000-HA $299.00 CKA7000-HA-1 $299.00 ZR / XF 7000 2016 CKA7000-2 $399.95 CKA7000-2-HA $399.95 CKA7000-2-HA-1 $399.95 730 Speedwerx 500 to 730 Sno Pro 2010-2014 Speedwerx 500 to 730cc Big Bore CKA730 $359.95 CKA730-HA $CALL CKA730-HA-1 $CALL 16 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

HYPERSHIFT CLUTCH KITS // HYPERSHIFT CLUTCH KIT APPLICATION CHART ARCTIC CAT MODEL (CONT D) YEAR MODIFIER 0-5,000 ft. PRICE 5,000-9,999 ft. PRICE 10,000 ft. + PRICE 800 Crossfire / Crossfire R 2010-2011 Stage 1 - Stock Pipe CKAF8-6 $139.00 CKAF8-6-HA $210.00 CKAF8-6-HA-1 $255.00 800 Crossfire / Crossfire R 2010-2011 Stage 2 - Speedwerx Pipe CKAF8-6-2 $225.00 N/A N/A N/A N/A 800 F-Series 2010-2011 Stage 1 CKAF8-7 $370.00 CKAF8-7-HA $CALL CKAF8-7-HA-1 $CALL 800 F-Series 2010-2011 Stage 2 CKAF8-7-2 $370.00 CKAF8-7-2-HA $CALL CKAF8-7-2-HA-1 $CALL 800 F / XF Procross 2012-2015 CKA800-6 $299.95 CKA800-6-HA $299.95 CKA800-6-HA-1 $299.95 800 M-Series 2007 CKAM8 $130.00 CKAM8-4-HA $130.00 CKAM8-4-HA-1 $130.00 800 M-Series 2010-2011 CKAM8-6 $130.00 CKAM8-6-HA $130.00 CKAM8-6-HA-1 $130.00 800 M-Series 2010-2011 With Speedwerx Single Pipe CKAM8-7 $130.00 CKAM8-7-HA $130.00 CKAM8-7-HA-1 $130.00 800 M Procross 2012-2015 CKA800-7 $185.95 CKA800-7-HA $185.95 CKA800-7-HA-1 $185.95 ZR /XF 8000 2016 CKA800-8 $399.95 CKA800-8-HA $399.95 CKA800-8-HA-1 $399.95 M / XFHC 8000 2016 CKA800-9 $399.95 CKA800-9-HA $399.95 CKA800-9-HA-1 $399.95 1000 M-Series 2008-2011 CKAM1-2 $130.00 CKAM1-HA-2 $130.00 CKAM1-HA-1-2 $130.00 Z1 Turbo / EXT 2009-2011 With 0627-073 Belt CKAZ1T-2 $275.00 CKAZ1T-2-HA $275.00 CKAZ1T-2-HA-1 $275.00 1100/9000 Turbo F / XF Procross 2012-2015 CKA1100T $269.95 CKA1100T-HA $269.95 CKA1100T-HA-1 $269.95 1100/9000 Turbo M Proclimb 2012-2015 CKA1100T-2 $299.95 CKA1100T-2-HA $299.95 CKA1100T-2-HA-1 $299.95 ZR / XF 1100T 2016 CKA1100T-3 $399.95 CKA1100T-3-HA $399.95 CKA1100T-3-HA-1 $399.95 M / XFHC 1100T 2016 CKA1100T-4 $399.95 CKA1100T-4-HA $399.95 CKA1100T-4-HA-1 $399.95 SPEEDWERX KITS ARE DESIGNED AND TESTED WITH WOODY S TRACTION PRODUCTS! WE SUGGEST WOODY S TRACTION PRODUCTS FOR ALL APPLICATIONS. BE SURE TO GET THE TRACTION YOU NEED, CALL US TO GET A WOODY S GRIP KIT. WE WILL CUSTOM TAILOR A KIT FOR YOUR MACHINE AND THE TYPE OF RIDING THAT YOU DO. CALL AND SPEAK TO ONE OF OUR TECHNICIANS - (651) 982-6020 OR EMAIL OUR TECH TEAM - TECH@SPEEDWERX.COM Shop online 24/7 Join our e-mail list online to receive our newsletter! 17

SNOWMOBILE ATV / UTV AUTOMOTIVE HYPERSHIFT CLUTCH WEIGHTS // HYPERSHIFT MACHINED ADJUSTABLE CLUTCH WEIGHTS - MADE IN THE USA! ORIGINAL HYPERSHIFT MACHINED WEIGHTS All of our machined adjustable weights come heat treated and black oxide coated to prevent wear and corrosion. We offer 3 different profiles of weights. The first being our Hammerhead (heavy tip) weights which provide you with the most aggressive shift. They work great on big torque twin cylinder engines. Then we have our Tapered Tip weights, which are the same profile as the Hammerhead weights but they feature a medium tip for a slightly less aggressive upshift and better backshift. Last but not least we have our Taper Tip 2 weights, which have a similar profile as the Tapered Tip weights but they feature the lightest tip available for the least aggressive upshift and the best backshift. The tip of the weight is adjustable so you can add 2.5 grams for fine tuning. HAMMERHEAD WEIGHTS I-60 (44.5gr) $35.95ea I-45 (47.5gr) $35.95ea I-30 (50.5gr) $35.95ea J-30 (52.5gr.) $35.95ea I-15 (53.3gr) $35.95ea I-56 (56.0gr) $35.95ea J-58 (58.0gr) $35.95ea K-60 (60.5gr) $35.95ea L-62 (62.4gr) $35.95ea M-64 (64.3gr) $35.95ea N-66 (66.5gr) $35.95ea O-68 (68.3gr) $35.95ea P-70 (70.3gr) $35.95ea Q-72 (72.5gr) $35.95ea R-74 (74.5gr) $35.95ea S-76 (76.5gr) $35.95ea T-78 (78.5gr) $35.95ea TT-80 (80.0gr) $35.95ea U-82 (82.5gr) $35.95ea V-85 (85.0gr) $35.95ea W-87 (87.0gr) $35.95ea X-89 (89.0gr) $35.95ea Y-91 (91.0gr) $35.95ea Z-93 (93.0gr) $35.95ea ZZ-95 (95.0gr) $35.95ea TAPERED TIP WEIGHTS I1-B (52.0gr) $35.95ea I-1 (53.2gr) $35.95ea J-1 (55.2gr) $35.95ea K-1 (57.0gr) $35.95ea L-1 (59.0gr) $35.95ea M-1 (60.5gr) $35.95ea M-1N (60.5gr/notch) $35.95ea N-1 (62.5gr) $35.95ea N1-N (62.5gr/notch) $35.95ea O-1 (64.5gr) $35.95ea P-1 (66.5gr) $35.95ea Q-1 (68.5gr) $35.95ea R-1 (70.0gr) $35.95ea S-1 (72.0gr) $35.95ea T-1 (74.0gr) $35.95ea TT-1 (76.0gr) $35.95ea U-1 (78.0gr) $35.95ea V-1 (80.5gr) $35.95ea W-1 (82.5gr) $35.95ea X-1 (84.5gr) $35.95ea Y-1 (86.5gr) $35.95ea FITS POLARIS P-85 AND P-90 CLUTCHES AND UP TO 2015 CAT MODELS TAPERED TIP 2 WEIGHTS I-2 (50.5gr) $35.95ea *I-2A (50.5gr) $35.95ea J-2 (52gr) $35.95ea K-2 (54gr) $35.95ea L-2 (56.0gr) $35.95ea M-2 (58.0gr) $35.95ea N-2 (60.0gr) $35.95ea N-2N (60.0gr/notch) $35.95ea P-2 (63.5gr) $35.95ea Q-2 (65.5gr) $35.95ea R-2 (67.5gr) $35.95ea S-2 (69.5gr) $35.95ea T-2 (71.5gr) $35.95ea TT-2 (73.5gr) $35.95ea U-2 (75.5gr) $35.95ea V-2 (77.5gr) $35.95ea W-2 (79.5gr) $35.95ea X-2 (81.5gr) $35.95ea Y-2 (83.5gr) $35.95ea NOTE: ALL WEIGHTS ARE SOLD WITHOUT BUSHINGS OR SET-SCREWS! IF YOUR MACHINE REQUIRES BUSHINGS, YOU MUST ORDER THEM SEPARATELY! WEIGHT BUSHINGS / SET SCREWS Weight bushings and set screws are sold separately. Be sure to order as many as you need for your model as well as the correct part. Set screws should be replaced every time you change weights! Bushing should be replaced when worn or when they are loose. RWB 25165 RWB-kit Weight Bushings $26.95set 25165 Set Screw $0.66ea RWB2-kit Bushings for Team Primary $44.95set CAM ARM REPAIR KITS Replace your worn or damaged clutch weight pins. Make sure your clutch is operating properly. Each kit will repair one primary clutch. 4639-674 4639-674 FIXED PIN STYLE $33.95 1639-030 BUSHING STYLE $47.49 ADJUSTABLE AGGRESSIVE PROFILE MACHINED WEIGHTS This new aggressive profile weight revs quicker at engagement while shifting harder through the mid-range and top end. These weights will act 4 to 6 grams heavier than a standard profile weight. (If you are replacing a 65 gram standard weight, you should order a 60-61 gram aggressive profile weight.) The tip is also adjustable so you can add up to 2.5 grams for fine tuning. The engagement RPM will increase about 200 RPM over the standard profile. 5-SERIES ADJUSTABLE MACHINED WEIGHTS These weights are designed to match the power curve and shift characteristics of some of the new 4-stroke engines on the market. These weights all act 4-6 grams heavier in the clutch than they weigh on the scale. ADJUSTABLE WEIGHT COMPONENTS ADJUSTMENT KIT/INDIVIDUAL COMPONENTS This kit comes with a base of set screws, button head screws, washers and loc-tite for fine tuning and adjusting your new speedwerx weights. With this kit you can add from 0.5g - 2.4g per weight. Individual parts are also available. SPXAWK ADJUSTABLE AGGRESSIVE PROFILE MEDIUM TIP WEIGHTS I3-1 (54.0gr) $35.95ea J3-1 (56.0gr) $35.95ea J3-1N (55.1gr) $35.95ea K3-1 (58.2gr) $35.95ea K3-1N (57.0gr) $35.95ea O3-1 (65.0gr) $35.95ea Q3-1N (70.8gr) $35.95ea S3-1 (74.3gr) $35.95ea T3-1 (76.1gr) $35.95ea U3-1 (80.1gr) $35.95ea V3-1 (82.7gr) $35.95ea W3-1 (84.8gr) $35.95ea ZZ3-1 (95.0gr) $35.95ea These weights act 4-6 grams heavier! ADJUSTABLE AGGRESSIVE PROFILE LIGHT TIP WEIGHTS J3-2 (54.5gr) $35.95ea K3-2 (56.5gr) $35.95ea L3-2 (58.5gr) $35.95ea M3-2 (60.3gr) $35.95ea N3-2 (62.5gr) $35.95ea O3-2 (64.3gr) $35.95ea P3-2 (66.2gr) $35.95ea Q3-2 (68.3gr) $35.95ea R3-2 (70.2gr) $35.95ea S3-2 (72.3gr) $35.95ea These weights act 4-6 grams heavier! FITS POLARIS P-85 AND P-90 CLUTCHES AND UP TO 2015 CAT MODELS 18 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com ADJUSTABLE 5-SERIES WEIGHTS M-5 (62.6gr) $35.95ea N-5 (64.4gr) $35.95ea O-5 (66.5gr) $35.95ea P-5 (68.4gr) $35.95ea Q-5 (70.4gr) $35.95ea R-5 (72.6gr) $35.95ea S-5 (74.3gr) $35.95ea T-5 (76.4gr) $35.95ea These weights act 4-6 grams heavier! ADJUSTMENT KIT SPXAWK Adjustment Kit $15.95 THREADLOCK TUBE 0150425 BLUE - MEDIUM $2.50 WASHERS 1175203 0.4g $0.30ea SET SCREWS 25165 (8-32 x 3/16 ) - 0.3gr $0.66ea 25167 (8-32 x 5/16 ) - 0.5gr $0.66ea 25168 (8-32 x 3/8 ) - 0.6gr $0.66ea 25169 (8-32 x 1/2 ) - 0.9gr $0.66ea BUTTON-HEAD SCREWS 24021 (8-32 x 3/16 ) - 0.9g $0.99ea 24022 (8-32 x 1/4 ) - 1.0g $0.99ea 24691 (8-32 x 5/16 ) - 1.1g $0.99ea 24023 (8-32 x 3/8 ) - 1.2g $0.99ea 24024 (8-32 x 1/2 ) - 1.5g $0.99ea

HYPERSHIFT CLUTCH WEIGHTS // HYPERSHIFT MACHINED CLUTCH WEIGHTS - MADE IN THE USA! NEW TEAM BOSS PRIMARY CLUTCH WEIGHTS BUSHINGS SOLD SEPARATELY These new T series weights are built specifically for the new Arctic Cat Team primary clutches they are built to with stand all requirements that come with these new clutches. All of our machined weights come heat treated and black oxide coated to prevent wear and corrosion. We offer 4 different profiles of weights all of them are adjustable by about 2.5 grams heavier on the tip with the use of our adjustable weight kit. Bushings sold separately. Hammerhead (heavy tip) weights which provide you with the most aggressive shift. Tapered Tip weights feature a medium tip for a slightly less aggressive up-shift and better back-shift. Taper Tip 2 weights feature the lightest tip available for the least aggressive up-shift and the best back-shift. 4 Series Aggressive profile weights feature an aggressive ramps for a very aggressive up shift and a light tip to maintain good back-shift. FULL TIP HAMMER HEAD STYLE ADJUSTABLE MACHINED WEIGTHS I-T (60.3gr) $49.95ea J-T (62.5gr) $49.95ea K-T (64.3gr) $49.95ea L-T (66.5gr.) $49.95ea M-T (68.3gr) $49.95ea N-T (70.5gr) $49.95ea O-T (72.3gr) $49.95ea P-T (75.5gr) $49.95ea Q-T (77.3gr) $49.95ea R-T (79.5gr) $49.95ea S-T (81.5gr) $49.95ea T-T (83.5gr) $49.95ea TT-T (85.5gr) $49.95ea U-T (87.3gr) $49.95ea V-T (89.5gr) $49.95ea W-T (91.3gr) $49.95ea X-T (93.5gr) $49.95ea Y-T (95.3gr) $49.95ea Z-T (97.5gr) $49.95ea MEDIUM TIP / SAME AS POLARIS 10 SERIES ADJUSTABLE MACHINED WEIGHTS I-1T (58.5gr) $49.95ea J-1T (60.3gr) $49.95ea K-1T (62.5gr) $49.95ea L-1T (64.3gr) $49.95ea M-1T (66gr) $49.95ea N-1T (67.7gr) $49.95ea O-1T (69.8) $49.95ea P-1T (72.0gr) $49.95ea Q-1T (73.5) $49.95ea R-1T (75.5gr) $49.95ea S-1T (77.4gr) $49.95ea T-1T (79.1gr) $49.95ea TT-1T (80.6gr) $49.95ea U-1T (82.5gr) $49.95ea V-1T (85.3gr) $49.95ea W-1T (87.5gr) $49.95ea X-1T (89.3gr) $49.95ea Y-1T (91.5gr) $49.95ea LIGHT TIP / TAPERED TIP SERIES ADJUSTABLE MACHINED WEIGHTS I-2T (57.3gr) $49.95ea J-2T (59gr) $49.95ea K-2T (60.8gr) $49.95ea L-2T (62.5gr) $49.95ea M-2T (64.3gr) $49.95ea N-2T (66gr) $49.95ea O-2T (67.8gr) $49.95ea P-2T (69.5gr) $49.95ea Q-2T (71.3gr) $49.95ea R-2T (73gr) $49.95ea S-2T (74.8gr) $49.95ea T-2T (76.6gr) $49.95ea TT-2T (78.3gr) $49.95ea U-2T (80.0gr) $49.95ea V-2T (81.8gr) $49.95ea W-2T (83.6gr) $49.95ea X-2T (85.3gr) $49.95ea Y-2T (87.0g) $49.95ea AGGRESSIVE PROFILE MACHINED WEIGHTS J-4T (54.0gr) $49.95ea K-4T (55.7gr) $49.95ea L-4T (57.5gr) $49.95ea M-4T (59.3gr.) $49.95ea N-4T (61.0gr) $49.95ea O-4T (62.7gr) $49.95ea P-4T (64.5gr) $49.95ea Q-4T (66.3gr) $49.95ea R-4T (68.0gr) $49.95ea S-4T (69.7gr) $49.95ea T-4T (71.5gr) $49.95ea TT-4T (73.3gr) $49.95ea U-4T (75.0gr) $49.95ea V-4T (76.7gr) $49.95ea W-4T (78.4gr) $49.95ea These will act 4-6 grams heavier than what they weigh on the gram scale ACTUAL WEIGHT MAY VERY AS PRODUCTION PARTS WERE NOT COMPLETE AT TIME OF THIS SHEET / NOTE: ALL WEIGHTS ARE SOLD WITHOUT BUSHINGS OR SET-SCREWS! IF YOUR MACHINE REQUIRES BUSHINGS, YOU MUST ORDER THEM SEPARATELY! For over fifteen years I ve been using Speedwerx performance clutching and tuning components. Their dedication to testing and building quality - TUCKER HIBBERT performance products is a huge part of my success. The home of horsepower. Image by: John Hanson Shop online 24/7 Join our e-mail list online to receive our newsletter! 19

SNOWMOBILE ATV / UTV AUTOMOTIVE HYPERSHIFT HELIXES // SPEEDWERX HYPERSHIFT HELIXES We offer 3 types of cuts on our helixes, Progressive, Compound Radius and Straight. Progressive angle helixes progressively change from the starting angle to the ending angle down the whole ramp. Compound radius cut helixes are progressive on the first section of the ramp and have a straight angle on the end of the ramp. Our straight helixes maintain the same angle through the entire ramp of the helix. The advantage to the compound radius is that it will typically back shift quicker for snow cross or tight twisty trail riding. The starting angle is always steeper at first for quicker acceleration, then progressively changes to the lesser angle so that the clutches don t over shift and bog down the motor so you retain excellent top speed. TEAM BOSS HELIX SPEEDWERX 2012-2015 ARCTIC DRIVE HELIX TEAM BOSS HELIX COMPOUND CUT PART # PRICE TBH-59-43.36 $116.95 TBH-59-45.36 $116.95 TBH-61-43.36 $116.95 TBH-61-45.36 $116.95 TBH-63-43.36 $116.95 TBH-63-45.36 $116.95 TBH-63-47.36 $116.95 TBH-65-47.36 $116.95 TBH-58-49.15 $116.95 TBH-66-49.20 $116.95 TBH-59-48.20 $116.95 STRAIGHT CUT PART # PRICE ADS36 $120.00 ADS38 $120.00 ADS40 $120.00 STRAIGHT CUT ++PART # PRICE TBH-42 $116.95 TBH-43 $116.95 TBH-44 $116.95 TBH-45 $116.95 TBH-46 $116.95 TBH-47 $116.95 TBH-48 $116.95 2012-2015 MODELS FIXED SPRING RATE ADS HELIXES COMPOUND CUT PART # PRICE ADS54-40X $120.00 ADS54-38X $120.00 ADS54-36X $120.00 ADS52-40X $120.00 ADS52-38X $120.00 ADS52-36X $120.00 ADS50-40X $120.00 ADS50-38X $120.00 ADS50-36X $120.00 ADS48-40X $120.00 ADS48-38X $120.00 ADS48-36X $120.00 ADS46-40X $120.00 ADS46-38X $120.00 ADS46-36X $120.00 ADS44-40X $120.00 ADS44-38X $120.00 ADS44-36X $120.00 ADS42-40X $120.00 ADS42-38X $120.00 ADS42-36X $120.00 PROGRESSIVE CUT PART # PRICE TBH-65-45.36R $116.95 TBH-67-45.46R $116.95 TBH-65-45.46R $116.95 TBH-67-45.36R $116.95 TBH-63-45.36R $116.95 TBH-63-45.46R $116.95 TBH-64-49.20R $116.95 TBH-66-49.20R $116.95 PROGRESSIVE CUT PART # PRICE TBH-42R $116.95 TBH-43R $116.95 TBH-44R $116.95 TBH-45R $116.95 TBH-46R $116.95 TBH-47R $116.95 TBH-48R $116.95 PROGRESSIVE CUT PART # PRICE ADS54P40 $120.00 ADS54P38 $120.00 ADS54P36 $120.00 ADS52P40 $120.00 ADS52P38 $120.00 ADS52P36 $120.00 ADS50P40 $120.00 ADS50P38 $120.00 ADS50P36 $120.00 ADS48P40 $120.00 ADS48P38 $120.00 ADS48P36 $120.00 ADS46P40 $120.00 ADS46P38 $120.00 ADS46P36 $120.00 ADS44P40 $120.00 ADS44P38 $120.00 ADS44P36 $120.00 ADS42P40 $120.00 ADS42P38 $120.00 ADS42P36 $120.00 TEAM PRIMARY CLUTCH SPRING CUP ADAPTOR This spring cup adaptor is designed to allow you to run your older style primary springs on the new Team clutches. It is necessary to keep proper spring alignment when using the old style springs in the new Team clutch. These new clutches not only have a different load height compared to the old clutches, the spring cup diameter is different as well. Using this adaptor with your old springs will change the rate of your spring slightly. Here is a list of rate changes with our Speedwerx springs. # SPXTPSA $ 19.95 ORIGINAL RATE AT 2.5 & 1.25 CCH5-A-120-310 115-305 CCH5-A-125-340 120-335 CCH5-A-140-335 130-325 CCH5-A-170-260 160-255 CCH5-B-155-300 150-305 CCH5-B-165-310 155-315 CCH5-B-170-330 165-310 CCH5-B-175-305 170-300 CCH5-B-180-300 175-295 CCH5-B-190-330 180-320 CCH5-D-114-267 110-265 CCH5-D-122-285 115-275 CCH5-D-148-290 143-285 Team clutch heights with Spx adaptor at 2.7 & 1.4 SPXTPSA 20 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

SPEEDWERX H5 CLUTCH SPRINGS // CLUTCH SPRINGS Everyone wants to know why we offer the new H5 Alloy springs. The truth is there are several reasons why, but the main reason was to try and cut down on the price of titanium that has sky-rocketed in the past few years. We want to provide our customers with a high performance part but we also want it to be priced reasonably low. These new springs feature the following; SPEEDWERX H5 SPRINGS ARE AVAILABLE FOR CLUTCH, SUSPENSION, AND VALVETRAIN APPLICATIONS. THIS NEW MATERIAL HAS A 30,000 TO 40,000 PSI HIGHER TENSILE STRENGTH THAN STANDARD CHROME SILICON WIRE SPRINGS. WE HAVE BEEN TESTING AND RUNNING THESE SPRINGS FOR OVER 9 YEARS. (GRASS DRAGS / SNO-X / CROSS-COUNTRY & TRAIL APPLICATIONS!) NO RATE LOSS OVER TIME WHICH MAINTAINS EFFICIENT CLUTCHING FOR A BETTER PERFORMING AND MORE CONSISTENT SPRING! UP TO A 35% WEIGHT SAVINGS OVER CHROME SILICON WIRE SUSPENSION SPRINGS! SAME PERFORMANCE AS TITANIUM AT A FRACTION OF THE COST! CUSTOM APPLICATIONS AVAILABLE UPON REQUEST! ARCTIC CAT 6 & 9 POST, POLARIS P-85 & COMET PRIMARY CLUTCHES Rated @ 2.5 & 1.25 PART # COLOR PRICE CCH5-A-120-310 Blue/White $39.95 CCH5-A-125-340 White $39.95 CCH5-A-140-335 Black $39.95 CCH5-A-170-260 Red/Green $39.95 CCH5-B-155-300 Red $39.95 CCH5-B-165-310 Blue $39.95 CCH5-B-170-330 Black/Yellow $39.95 CCH5-B-175-305 Black/Gold $39.95 CCH5-B-180-300* Blue/Green/Green $39.95 CCH5-B-190-330* Blue/Green $39.95 CCH5-D-122-285 Black/Green/Yellow $39.95 CCH5-D-114-267 Green $39.95 CCH5-D-148-290 Green/White $39.95 * Not covered under Speedwerx limited warranty. ARCTIC CAT TEAM PRIMARY CLUTCH 2016 Rated @ 2.7 & 1.4 - more rates coming soon CCH5-E-160-255 ARCTIC CAT / TEAM PRIMARY CLUTCH SPRING $49.95 CCH5-E-155-315 ARCTIC CAT / TEAM PRIMARY CLUTCH SPRING $49.95 CCH5-E-165-310 ARCTIC CAT / TEAM PRIMARY CLUTCH SPRING $49.95 CCH5-E-180-320 ARCTIC CAT / TEAM PRIMARY CLUTCH SPRING $49.95 See Spring Cup Adaptor for more options. 2012-2015 ARCTIC CAT H5 STANDARD SECONDARY SPRINGS Rated @ 2.6 & 1.4 PART # COLOR PRICE CCH5-N-150-230 Black/Red $39.95 CCH5-N-150-250 Black $39.95 CCH5-N-150-270 Black/Gray $39.95 CCH5-N-155-220 Black/Orange $39.95 CCH5-N-170-250 Black/Purple $39.95 CCH5-N-170-270 Black/White $39.95 NOTE: Stock Black/Blue spring is 180-295. TEAM BOSS DRIVEN CLUTCH Rated @ 2.6 & 1.6 PART # ARCTIC CAT BOSS TEAM SECONDARY SPRING PRICE CCH5-L-125-200 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-140-200 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-140-215 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-140-330 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-155-220 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-155-240 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-160-235 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-160-250 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-160-270 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-180-270 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-200-280 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 CCH5-L-180-240 ARCTIC CAT " BOSS " TEAM SECONDARY SPRING $49.95 TEAM TSS-98 & TSS-004 CLUTCHES Rated @ 2.875 & 1.625 PART # COLOR PRICE CCH5-J-140-240 Red $39.95 CCH5-J-150-250 Green $39.95 CCH5-J-155-222 Black/Red $39.95 CCH5-J-160-240 Black/Purple $39.95 CCH5-J-160-260 Black/White $39.95 CCH5-J-160-280 Black/Silver $39.95 CCH5-J-160-300 Black/Gold $39.95 CCH5-J-180-260 Black/Blue $39.95 CCH5-J-180-280 Black/Orange $39.95 CCH5-J-180-300 Black/Lime Green $39.95 SKI-DOO TRA PRIMARY SPRINGS Rated @ 2.9 & 1.6 PART # COLOR PRICE CCH5-C-160-320 Black/Blue $39.95 CCH5-C-200-320 Black/Yellow $39.95 CCH5-C-200-380 Black/Green $39.95 CCH5-C-230-350 Black/Red $39.95 ARCTIC CAT H5 STANDARD TORSIONAL SECONDARY SPRINGS Rated @ 2.4 & 1.4 PART # COLOR PRICE CTH5-G-052-100 Black/Red $39.95 CTH5-G-080-115 Black/Silver $39.95 CTH5-G-090-130 Black/Blue $39.95 CTH5-G-115-239 Black/Yellow $39.95 ARCTIC CAT H5 ACT DRIVE SECONDARY SPRINGS Rated @ 2.875 & 1.625 PART # COLOR PRICE CCH5-K-140-270 Black/Orange $39.95 CCH5-K-140-290 Black/Green $39.95 CCH5-K-170-270 Black/Yellow $39.95 CCH5-K-170-290 Black/Blue $39.95 CCH5-K-170-310 Black/Red $39.95 Shop online 24/7 Join our e-mail list online to receive our newsletter! 21

SNOWMOBILE ATV / UTV AUTOMOTIVE DRIVE BELTS // SPEEDWERX AND OEM SPEEDWERX DRIVE BELTS SPX8989 & BLT2 Are designed to replace stock Arctic Cat 020 & 031 belts, this belt is wider and longer. Belts work best for drag racing & Sno-X applications. SPX8989 Hard Compound $91.50 BLT2 Soft Compound $91.50 BLT-5 2012-2016 800 Models Drag Race Belt - Longer / Wider / Softer Than Stock $99.00 44x4640 2012-2016 9000 / 1100 Turbo Models Suggested for 400+ HP Applications $99.00 SPEEDWERX ACT DIAMOND DRIVE ARCTIC CAT BELT This belt comes with our top secret compound. This belt is longer & wider than the OEM belt, which offers a lower starting ratio for better acceleration. The compound length & width help prevent or reduce the huge belt slippage problems most of the diamond drive units have! If you have any questions, please contact our tech line. *ACTBLT-1 2005-06 Firecat With 10.4 Secondary Clutch (Trail) $138.00 * Gains 1.5 MPH in 1000 Ft. ARCTIC CAT OEM DRIVE BELT FITMENT CHART 2011 Bearcat 570/LTD 0627-067 Bearcat 570 XT 0627-046 Bearcat Z1 XT/LTD 0627-047 Crossfire 6 0627-046 Crossfire 8,CFR 8, CFR 1000 0627-060 F5 LXR/570 0627-067 F6 Sno Pro/8 EXT/LXR/ 8 Sno Pro LTD 0627-046 M6/8/HCR 0627-046 M1000 Sno Pro 0627-060 T570 0627-067 TZ1/LXR LTD 0627-069 TZ1 Turbo LXR LTD 0627-073 Z1 LXR 0627-069 Z1 Turbo EXT/LXR/Sno Pro 0627-073 Sno Pro 500 0627-047 Sno Pro 600 (Sno Cross 0627-075 Sno Pro 600 (Cross Country 0627-076 2012-2013 BC 570 0627-067 BC 570 XT 0627-046 BC Z1 XT 0627-047 F5 LXR, F570 0627-067 F 800 0627-084 F 1100 0627-081 F 1100 Turbo 0627-082 M 800 0627-084 M 1100 0627-081 M 1100 Turbo 0627-082 T570 0627-067 TZ1 Touring 0627-069 TZ1 Turbo Touring 0627-082 XF 800 0627-084 XF 1100 0627-081 XF 1100 Turbo 0627-082 Sno Pro 500 0627-047 Sno Pro 600 Sno-X / XC 0627-085 STOCK ARCTIC CAT DRIVE BELTS We carry a full line of Arctic Cat stock drive belts. We have them on hand and ready to ship to you! 0627-070 2008-09 600R Sno Pro Race Sled $179.95 0627-073 2009-2011 Z1 Turbo $179.95 0627-075 2010-2011 600R Sno Pro Race Sled (SNO-X) $179.95 0627-076 2010-2011 600R Sno Pro Race Sled (XC) $179.95 0627-081 See Chart Below $98.95 0627-082 See Chart Below $199.95 0627-083 See Chart Below $98.95 0627-084 See Chart Below $199.95 0627-085 See Chart Below $199.95 0627-086 See Chart Below $199.95 2014 BEARCAT 570 0627-067 BEARCAT 570 XT 0627-046 BEARCAT Z1 XT 0627-047 BEARCAT Z1 XT GS 0627-073 F5 0627-067 F570 0627-067 M 8000 0627-084 M 9000 0627-082 T570 0627-067 TZ1 0627-069 TZ1 TURBO 0627-073 XF 7000 TBD XF 8000 0627-083 XF 8000 High Country 0627-084 XF 9000 0627-082 ZR 5000 0627-081 ZR 6000 TBD ZR 6000 SP 0627-086 2014 (CONT D) ZR 7000 TBD ZR 8000 0627-083 ZR 9000 0627-082 SNO PRO 500 0627-047 STEALTH HEAD MOD KIT // STOCK APPEARING STEALTH HEAD MODS Available for most Arctic Cat models. What we do is machine / gut your stock head so that you can run our interchangeable domes. Our domes drop right into place under your stock head cover without anyone even knowing it! Not only does this add some serious power to your machine, but it is a cheaper alternative to the complete billet head kit set-up. How this works is you can either send us your stock head or order a new stock head through us (we normally have them on-hand). We will machine it for our domes, and then send it to you. If you would like to send in your stock (un-machined) head, we will give you a credit when we receive it! 2007-2016 800 MODELS STEALTH HEAD KIT STOCK APPEARING STEALTH HEAD MOD APPLICATIONS ACFHM-500 STOCK HEAD DOME PART # DOME O-RING PART # ARCTIC CAT MODEL YEAR MOD PART # PRICE (NEED 2) DESCRIPTION PRICE (NEED 2) PRICE 500 Sno Pro/4000 10-16 ACFHM-500 $125.00 ACF5BH-13 Premium pump gas 0-5000 $80.00 121-9746 $2.00 ACF5BH-14 110 octane 0-5000 or premium pump gas 5000 + $80.00 ACF5BH-16 114 octane 0-5000 or premium pump gas 10000 + $80.00 800 / 8000 Crossfire / F-Series / M-Series 07-16 ACFHM-800 $177.00 ACFHM-800 11:1 Compression For Boosted Applications $99.95 1-232 9727 $3.95 *NOTE: 2010-16 800 Models come stock with 13:1 compression ratio! ACFHM-800 12:1 Compression For Boosted Applications $99.95 ACF8BH13D-1 0-5,000 ft. Premium Fuel $180.00 ACF8BH14D-1 5,000-9,999 ft. Premium Fuel $180.00 ACF8BH15D-1 10,000 + ft. Premium Fuel $180.00 925 Crossfire / F-Series / M-Series Big Bore 07-16 ACFHM-800 $177.00 ACF925BH13D 0-5,000 ft. Premium Fuel $180.00 1-232 9727 $3.95 ACF925BH14D 5,000-9,999 ft. Premium Fuel $180.00 ACF925BH15D 10,000 ft.+ Premium Fuel $180.00 22 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

BIG BORE KITS // 925CC BIG BORE KIT - (WORKS GREAT FOR BOOSTED APPLICATIONS TOO!) Kit comes complete with cylinder boring, porting and plating, custom pistons, base gaskets, our stealth sleeper head mod kit with your choice of 13, 14 or 15:1 compression ratio inserts, and matching of your stock exhaust valves (our light weight aluminum valves are also available). Kit requires premium 91+ octane fuel. Your cylinders and head need to be sent in for exchange, outright cylinders and heads available upon request at an additional cost. Kit also works great on turbo equipped machines. 2007-2009 MODEL CYLINDERS WILL SEE 170+ HP AND OVER 115 FT POUNDS OF TORQUE @ 7700-7900 RPM. 2010-2016 MODELS WILL SEE 188+ HP DUE TO THE BETTER PORT LAYOUT OF THE STOCK CYLINDERS. APPLICATIONS: 2007-2016 800cc Crossfire, Crossfire R, F-Series and M-Series Models PART# DESCRIPTION PRICE ACF925BB-13 0-4,999 ft. $2100.00 (With Exchange) ACF925BB-14 5,000-9,999 ft. $2100.00 (With Exchange) ACF925BB-15 10,000 ft. + $2100.00 (With Exchange) REPLACEMENT PARTS (NOT ALL INCLUDED IN KIT!) PART# DESCRIPTION PRICE ACF925CYL Modify Cylinder to Speedwerx Spec. $720.00 ACF925BH-13D Dome, 13:1 $180.00 ACF925BH-14D Dome, 14:1 $180.00 ACF925BH-15D Dome, 15:1 $180.00 11319M09150 Piston Kit $269.00 3604KD Replacement Ring Set $30.85 3008-503 Needle Bearing, 22mm $27.95 ACFHM-800 Stock Head Cover Mod (For Speedwerx Inserts) $177.00 1-232 9727 2007-2016 Dome O-Ring $3.95 3005-854 2007-2016 Inner Head O-Ring $15.99 3004-081 2007-2016 Outer Head O-Ring $12.49 3007-523 2007-2009 Base Gasket $18.79 3007-536 2007-2009 Exhaust Gasket $4.99 3007-521 2007-2009 Cylinder Head, Stock $378.49 3007-522 2007-2009 Cylinder, Stock $844.99 3007-849 2010-2016 Cylinder, Stock $875.95 3007-873 2010-2016 Cylinder Head, Stock $378.49 3007-874 2010-2016 Base Gasket $18.79 3007-889 2010-2016 Exhaust Gasket $9.49 925 BIG BORE KIT ADDITIONAL OPTIONS: PART# DESCRIPTION PRICE ACF807EV 2007-2009 Billet Exhaust Valve $99.00ea. ACF810EV 2010-2016 Billet Exhaust Valve $99.00ea. Speedwerx Single Pipe Kit $719.95 Speedwerx Lightweight Muffler $319.95 Speedwerx High Flow Intake $77.95 - $199.95 Speedwerx Hypershift Clutch Kit $130.00 - $399.95 Speedwerx PCV Fuel Controller $379.95 Auto Tune Kit for PCV $279.99 V-Force Reeds $258.00 Dual EGT Gauge $359.95 Speedwerx Throttle Body Boring $300.00 600 SNO PRO 800CC BIG BORE KIT For those of you who want even more out of your 600 Sno Pro we have our 800cc big bore kit. The 800 kit requires stock 700 cylinder cores and a stock 2003-2011 600 or 700 head core to start. We have stock cylinders and heads on hand ready to go if needed. We start by boring, porting and re-plateing your cylinders to our 800 specs and then we re-machine a stock cylinder head to accept our domes. We then send everything back with larger exhaust valves, pistons, wrist pin bearings and washers, our custom connecting rods, base gaskets and spark plug o-rings. Kit produces 160+ HP and tons of torque with our Fat Daddy single pipe and bored carbs. Kit is designed and intended to run on premium pump gas (91+ octane). APPLICATIONS: 2008-2014 600 Sno Pro Models PART# PRICE AC6/800BB-13 13:1 - Premium Pump Gas 0-5000 $2715.00 (After Exchange) AC6/800BB-14 14:1 - Premium Pump Gas 5000 + or 110 Octane Below 5000 $2715.00 (After Exchange) AC6/800BB-15 15:1 - Premium Pump Gas 10,000 + or 114 Octane Below 5000 $2715.00 (After Exchange) NOTE: Speedwerx has cores on hand ready for exchange for both 700 and 800 kits. This means less down time and more ride time. Speedwerx can also build your entire engine if needed. This includes tear down, new rod install and reassembly. Call our tech line for more details. 800 BIG BORE KIT - 160+ HORSEPOWER MORE BIG BORE / ENGINE KITS AVAILABLE The big bore kits and engine kits listed below are also available. If you would like more information on these kits, please visit our website or call our tech line @ 651.982.6020! ARCTIC CAT MODEL STOCK SIZE MOD SIZE STARTING PRICE NOTED FOR SnoPro / Firecat 440/500cc 730cc or 780cc $4500.00 Multiple WSA National SNO-X Wins SnoPro / Firecat 440/500cc 600cc $4500.00 2 x WPSA Pro National Points Titles 2 x Winter X Games old Medals Crossfire/M-Series/F-Series 600/700cc 800cc $2100.00 Endless list of Hillclimb wins out west ZR/ZL 800/900cc 1000cc $2015.00 Numerous pink slips won across North America M-Series 600cc 600cc Improved $2950.00 9 x Jackson Hole Hill Climb World Champion M-Series 700cc 700cc Improved $2950.00 8 x Jackson Hole Hill Climb World Champion M-Series 800cc 800cc Improved $2950.00 7 x Jackson Hole Hill Climb World Champion M-Series 1000cc 1000cc Improved $2950.00 3 x Jackson Hole Hill Climb World Champion 1 x Undefeated Season Shop online 24/7 Join our e-mail list online to receive our newsletter! 23

SNOWMOBILE ATV / UTV AUTOMOTIVE INTAKE PERFORMANCE // AC800HFI BOYESEN RAD VALVES// BOYESEN RAD VALVES MAXIMUM POWER ACHIEVED THROUGH AIR INTAKE, ACCELERATION AND DISTRIBUTION A year ago BOYESEN engineers embarked on a mission to create a new lineage of aerodynamic intake technology by refining the primary performance factors required to increase peak horsepower through design innovation: Aerodynamic Surface Optimization, Model-Specific Reed Petal Tensioning, Material Fuel Resistance, and Multi-Stage Reed Timing. Together, these innovations create a new technological benchmark in intake performance. The next generation Rage Cage RC2 series results in an optimized reed valve system that provides superior efficiency, peak horsepower gains, and acceleration for YOUR specific model sled. PRECISION CASTING Your engine is a glutton for air. It will take over 200 gulps per second, at velocities over 500 MPH - if your intake valve will let it. The Rage Cage s seamless, one-piece, precision casting and continuous aeroform surfaces ensure maximum flow velocities and instant, explosive movement of air particles the moment you open the throttle. Result: An intake valve the size of your fist delivers air with the power of a tornado. POWER CHANNELED AIR CHARGE Integrated into the seamless inner chamber are 4-way aerodynamic directional dividers that distribute the angled charge evenly without flow loss. Each channel has its own unique Power Profile, scientifically shaped to produce instant, explosive movements of air. Result: Unparalleled performance. INTELLIGENT MULTI-STAGE REED PETAL SYSTEM Standard equipment on each Rage Cage, Boyesen dual-stage, Pro Series Reeds have the superior ability to time themselves to the needs of the engine. You get maximum flow velocity across the entire RPM range, and at all throttle settings. Smooth. Sharp. Smart. Result: Full Spectrum power and throttle response. OPTIMIZED FOR EACH MAKE/MODEL/YEAR SLEDl Each Boyesen Rage Cage is unique - tailor made to that model, year and displacement. While other aftermarket valves might change flange sizes or bolt patterns, they re basically generic - and require you to irreversibly cut your intake boot to install it! But with the Rage Cage, there are no compromises in power, no modifications. Result: A true, bolt-on Power Boost. 2012-2014 HIGH FLOW INTAKES More air and cooler air gives you more power and performance. No EFI changes needed. The 1100T models intake kit comes through the hood. PART# DESCRIPTION PRICE AC6000HFI 2014-2016 6000 El Tigre Models $25.95 AC800HFI 2012-2016 800 F / M / XF Models $25.95 AC9000HFI 2014-2016 9000 M / XF / ZR Models $199.95 AC1100THFI 2012-2013 1100 Turbo F / M / XF Models $199.95 BOYESEN RAGE CAGES AND ACCESSORIES ARCTIC CAT MODEL YEAR RAGE CAGE PRICE ZR 440/SnoPro 98-02 RAD50A-2 $329.95 440 Sno Pro 03-04 RAD51A-2 $329.95 500 / 4000 2015-16 RAD51B-2 $329.95 500 Sno Pro 11-14 RAD51B-2 $329.95 F5 SaberCat / LXR (EFI) 06-14 RAD51B-2 $329.95 Crossfire 5 07-09 RAD51B-2 $329.95 F5 Firecat / Sabercat/M5 03-06 RAD51A-2 $329.95 Mtn. Cat 500 01-02 RAD50A-2 $329.95 ZL/ZR 500 99-02 RAD50A-2 $329.95 Crossfire 6 06-11 RAD51B-2 $329.95 F6 FCat/SCat/M6/LXR (EFI) 04-11 RAD51B-2 $329.95 F6 Firecat/Sabercat (Carbureted) 04-05 RAD51-2 $329.95 Mtn. Cat 600 (EFI) 2004 RAD51B-2 $329.95 Mtn. Cat 600 (Carbureted) 01-03 RAD50A-2 $329.95 Trip. Touring 600 2000 RAD50A-3 $329.95 ZL/ZR 600 (Carbureted & EFI) 99-03 RAD50A-2 $329.95 ZRT 600 97-03 RAD50A-3 $329.95 Crossfire 7 2006 RAD51B-2 $329.95 F7 Firecat (Carbureted) 03-06 RAD51-2 $329.95 F7 Firecat /M7/Sabercat (EFI) 03-06 RAD51B-2 $329.95 800 H.O. / 8000 / F8 / M800 10-16 RAD53-2 $329.95 Crossfire 8 / Crossfire 8 Sno Pro $329.95 F8 / F8 Sno Pro / LXR 07-09 RAD51C-2 $329.95 M8 / M8 Sno Pro $329.95 Mtn. Cat 800 (Carbureted) 01-02 RAD51-2 $329.95 Mtn. Cat 800 (EFI) 02-04 RAD51B-2 $329.95 ZR / ZL 800 01-03 RAD51-2 $329.95 ZR / ZL 800 (EFI) 02-03 RAD51B-2 $329.95 ZRT 800 95-01 RAD50A-3 $329.95 Mtn Cat 900 (Carbureted) 03-04 RAD51-2 $329.95 Mtn Cat 900 (EFI) 03-04 RAD51B-2 $329.95 T-Cat 900 93-98 RAD50A-3 $329.95 ZR/ King Cat 900 (Carbureted) 03-05 RAD51-2 $329.95 ZR/ King Cat 900 (EFI) 03-06 RAD51B-2 $329.95 Crossfire 1000 / Sno Pro $329.95 F1000 / F1000 Sno Pro / LXR 07-11 RAD52-2 $329.95 M1000 / M1000 Sno Pro $329.95 Mtn Cat 1000 / T-Cat 1000 99-02 RAD50A-3 $329.95 RAD53-2 24 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

INTAKE PERFORMANCE // V-FORCE 3 REED VALVE SYSTEM Introducing the new VForce 3, by Moto Tassinari. Moto Tassinari has continued to build upon their industry leading design that doubles the reed tip surface of a standard reed valve. The advantages of doubling the reed tip surface are numerous. On a VForce, with its less restrictive design, the reed petals only travel half the distance of a standard valve resulting in greater airflow through the entire RPM range and increasing reed petal life. Throttle response and horsepower is greatly increased with the addition of a VForce, however fuel economy is typically also greater, due to the efficiency of a VForce reed valve system. Exclusive to the VForce 3 is our patent pending snap together cage design that utilizes symmetrical reed petals, eliminating the need for different inner and outer replacement petals. Also new is the patent pending reed tip shape that accelerates the air mixture over the reed tips, ensuring increased airflow for increased horsepower. The new design completely eliminates the need for screws. So when you do need to finally replace your worn reeds the job is literally... a SNAP. Whether you re looking for more horsepower, additional RPM s, higher efficiency, longer reed petal life or an ultra light replacement for your heavy conventional stock cages, look no further than the VForce 3, by Moto Tassinari. BOLT ON 2-3 HP DEPENDING ON MODEL! SEE APPLICATION CHART FOR PART NUMBER AND PRICE. V-FORCE PERFORMANCE REED APPLICATIONS ARCTIC CAT REEDS PETALS GASKETS MODEL YEAR PART # PRICE ONLY PRICE ONLY PRICE 440 ZR/ZL SnoPro 98-02 V3110-682A-2 $258.00 3P682M $59.95 G3110 $2.80 440 SnoPro 03-07 V3112-873A-2 $258.00 3P883A $59.95 G3112 $2.80 500 ZR/ZL/MC All V3110-682A-2 $258.00 3P682M $59.95 G3110 $2.80 500 Firecat/Sabercat (Carb) All V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 500 F5/Sabercat/LXR (EFI) 06-10 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 500 M-Series (Carb) All V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 500 Crossfire All V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 500 F-Series/Sabercat 07-11 V3112-873C-2 $258.00 3P883A $59.95 G3112 $2.80 500 Sno Pro 4000 10-16 V3112-873C-2 $258.00 3P883A $59.95 G3112 $2.80 5000 ZR LXR 14 V3112-873C-2 $258.00 3P883A $59.95 G3112 $2.80 600 ZR/ZL/MC (Carb) 99-03 V3110-682A-2 $258.00 3P682M $59.95 G3110 $2.80 600 Mtn. Cat (EFI) 2004 V3110-682A-2 $258.00 3P682M $59.95 G3110 $2.80 600 ZRT All V3110-682A-3 $348.00 3P682M $59.95 G3110 $2.80 600 Triple Touring 00 V3110-682A-3 $348.00 3P682M $59.95 G3110 $2.80 600 Firecat/Sabercat (Carb) 04-05 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 600 F-Series/Sabercat (EFI) 04-11 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 600 M-Series / LXR (EFI) 06-09 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 600 Crossfire 06-09 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 600 Sno Pro 08-11 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 6000 El Tigre 14 700 Firecat/Sabercat (Carb) 03-06 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 700 Firecat/Sabercat (EFI) 03-06 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 700 M-Series (Carb) 03-06 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 700 M-Series (EFI) 03-06 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 700 Crossfire 2006 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 800 ZR/ZL/MC/1M Carb 01-03 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 800 ZR/ZL/MC/1M EFI 02-04 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 800 ZRT All V3110-682A-3 $348.00 3P682M $59.95 G3110 $2.80 800 M-Series / HCR / F-Series 07-13 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 800 Crossfire / Crossfire R 07-13 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 8000 M / XF / ZR 14-16 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 900 ZR/ZL/MC/KC Carb 03-05 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 900 ZR/ZL/MC/KC EFI 03-06 V3112-873B-2 $258.00 3P883A $59.95 G3112 $2.80 900 T-Cat All V3110-682A-3 $348.00 3P682M $59.95 G3110 $2.80 1000 T-Cat/Powder Special All V3110-682A-3 $348.00 3P682M $59.95 G3110 $2.80 1000 F-Series All V3112-904-2 $258.00 3P904A $59.95 G3112 $2.80 1000 M-Series All V3112-904-2 $258.00 3P904A $59.95 G3112 $2.80 1000 Crossfire / Crossfire R All V3112-904-2 $258.00 3P904A $59.95 G3112 $2.80 SHOW 1100T HFI!!! 9000/1100T HIGH FLOW INTAKE More air = more power! We have high flow intake kits for most models. You will see up to a 6 horsepower gain depending on your model. All kits are easy to install so you spend more time on the trail and less time in the garage. PART# DESCRIPTION PRICE AC1100THFI 2012-2016 9000 / 1100T High Flow Intake Kit $199.95 AC1100THFI K&N HIGH FLOW CLAMP-ON FILTER These filters are suggested for drag racing or speed run racing ONLY! We do not suggest these for everyday trail riding as they may ice-up in certain situations. ECU re-mapping or fuel map changes may be required with these filters due to increased air-flow. SN-2620 RF-1001 PART# DESCRIPTION PRICE RF-1001 2012-2016 800 Models Clamp-on Filter to Stock Plenum $68.02 20-1075 Outerwear Pre-Filter For RF-1001 $21.95 SN-2620 2012-2016 800 Models & 2003-2011 600/700/800 Models $61.48 20-1299 Outerwear Pre-Filter For SN-2620 $17.45 NOTE: You will need one filter and pre-filter per carb/throttle body. Shop online 24/7 Join our e-mail list online to receive our newsletter! 25

SNOWMOBILE ATV / UTV AUTOMOTIVE MACHINE SERVICES // SPD-PORT CYLINDER BORING Our in-house boring bar allows for quick turn-around and expert service for boring cylinders. Renew out of spec. cylinders or repair damaged cylinders for improved performance. We can bore cylinders for OEM or aftermarket pistons. HSP-BORE-1 +.010 -.020 $75.00ea HSP-BORE-2 +.030 -.060 $100.00ea HSP-BORE-3 +.070 + $115.00ea CYLINDER & CRANK CASE PORTING Need some extra power? No problem, there is a lot extra left in your motor. Simply send us your cylinders (and exhaust valves, if your model has them) so our mad scientists can professionally modify the ports for optimum flow and efficiency. Computer, dyno and field testing are all done to achieve our porting specs. Don t be fooled by your neighbor who just came home with a new grinder. Trust the experts, trust Hot Seat Performance & Speedwerx. Specify trail, lake race, high altitude or full race. Full race porting also requires you send us your cases, for extensive crankcase porting. We ve gotta make it flow you know. NOTE: We here at HSP and Speedwerx are capable of porting just about anything, so don t be afraid to call and ask about special jobs! SPD-PORT Trail Cylinder Porting(All Models) $300.00ea SPD-PORT-R Full Race Cylinder Porting(All Models) $500.00ea SPD-CASE2 2 Cylinder Crank Case Porting(All Models) $200.00 SPD-CASE3 3 Cylinder Crank Case Porting(All Models) $300.00 CYLINDER BORING CARB BORING / THROTTLE BODY BORING / BUTTERFLY MODIFICATIONS If you have rack-style, flatslide carbs and are looking for more flow, we can bore them for you. We can bore 38 s to 40mm and 40 s to 42mm. A definite benefit when used on motors with ported cylinders. If you want us to disassemble and reassemble your carbs add $100.00/hour. HSP-CARB2 SPX-TBB HSP-CARB-1 Twin Cylinder Models $200.00 HSP-CARB-3 Three Cylinder Models $300.00 SPX-TBB Throttle Body Boring $300.00 HSP-CARB-L Carb/Throttle Body Boring Assembly Labor $100.00/hr SPX-TBB ARCTIC CAT OIL INJECTION BLOCK OFF KITS Eliminate the possibility of an oil pump failure with this oil pump elimination kit. Always have the proper oil/gas ratio by mixing it yourself. Oil pump, lines and oil tank can then be removed to save weight. Minor case mods will be required to complete oil injection removal! Saves 7-8 Lbs. over machines with a full oil bottle! PART# DESCRIPTION PRICE ATVBOP* Plate 03-10 600/700/800/1000 Arctic Cat Models $13.50 20005 Xtreme Oil Injection Elimination Kit (No Case Modification Needed) $29.95 0644-007 Oil Injection Usage Tool - Measure The Oil Usage in Oil Injection Models $58.95 *Requires Speedwerx Case Modification! Failure to do so can cause engine damage! 20005 0644-007 26 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

MACHINE SERVICES // (OLD) CYLINDER REPLATING We can repair and replate your damaged Nikasil cylinders to better than new condition. Even extremely scored cylinders and cracked bridge ports can be repaired at a fraction of the cost of new cylinders. REPLATE Replate (All Models) $210.00ea W/REPLATE Weld And Replate Cylinder (All Models) $290.00ea (NEW) CRANKSHAFT TRUE & WELD For the performance rider or racer, we can also true and weld your crank for lasting durability. HSP-TW2 HSP-TW2 Twin Cylinder True and Weld (All Models) $195.00 HSP-TW3 Three Cylinder True and Weld (All Models) $295.00 NOTE: We also offer complete crankshaft rebuilding! Call for details! CRANK CASE STUFFING SPXCCS 2003-2013 500/600/700/800/1000cc Models $950.00 SPXCCS Shop online 24/7 Join our e-mail list online to receive our newsletter! 27

SNOWMOBILE ATV / UTV AUTOMOTIVE SPROCKET & CHAIN APPLICATION CHART // 600 SNO PRO RACE SLED SPECIFICATIONS: 2012-2015 Models come with 13 wide / 33T Internal Bottom Sprockets and 13 wide / 19T internal top sprockets. Note: Sno-X models come with a slipper sprocket on the bottom! (This is a 46T TOS-ASSY). OEM APPLICATION CHART ARCTIC CAT MODEL YEAR CHAIN PITCH TOP GEAR BOTTOM GEAR ZR 4000 2015-16 90P/ 13W 21T / 13W 49T / 13W XF 6000 2014-16 90P/ 13W 22T / 13W 48T / 13W XF 7000 2014-16 90P / 13W 21T / 13W 49T / 13W F 800 2012-2013 84P / 13W 21T / 13W 38T / 13W XF 800 2012 90P / 13W 22T / 13W 48T / 13W XF 800 2013 84P / 13W 21T / 13W 38T / 13W XF 8000 2014-16 90P / 13 &15W 22T / 13 &15W 48T / 13W XF 9000 2014-16 86P / 15W 21T / 15W 41T / 13W F 1100 TURBO 2012-13 84P / 15W 22T / 15W 37T / 15W XF 1100 TURBO 2012 90P / 15W 21T / 15W 38T / 15W XF 1100 TURBO 2013-16 90P / 15W 22T / 15W 37T / 15W M 6000 2014-16 90P/ 13W 18T / 13W 50T / 13W M 7000 2015-16 90P/ 13W 21T / 13W 49T / 13W M 800 2012-13 90P / 13W 21T / 13W 49T / 13W M/XFHC 8000 2014-16 90P /13 & 15W 19T / 13 &15W 50T / 13W M/XFHC 9000 2014-16 90P / 13W 21T / 15W 49T / 13W M 1100 2012 90P/ 13W 21T / 13W 49T / 13W M 1100 TURBO 2012-13 90P / 15W 21T / 15W 49T / 15W ZR 5000 LXR 2014-16 90P / 13W 22T / 13W 48T / 13W ZR 6000 2014-16 90P / 13W 22T / 13W 48T / 13W ZR 7000 2014-16 90P / 13W 21T / 13W 49T / 13W ZR 8000 2014-16 86P / 15W 21T / 15W 41T / 13W ZR 9000 2014-16 84P / 15W 21T / 15W 38T / 13W 600 S/P (SNO-X) (Slipper on Bottom) 2012 90P / 13W 21T / 13W 49T / 13W 600 S/P (CROSS-COUNTRY) 2012 86P / 13W 23T / 13W 40T / 13W BORG WARNER SPROCKETS & CHAIN 2016 2-STROKE TOP MATERIAL MATERIAL DESCRIPTION 2602-943 SPROCKET,BW-18T FWD-(13 WIDE/19 SPLINE) pwd metal 2602-823 SPROCKET,BW-19T FWD-(13 WIDE/19 SPLINE) pwd metal 2602-824 SPROCKET,BW-20T FWD-(13 WIDE/19 SPLINE) pwd metal 2602-825 SPROCKET,BW-21T FWD-(13 WIDE/19 SPLINE) pwd metal 2602-826 SPROCKET,BW-22T FWD-(13 WIDE/19 SPLINE) pwd metal 2602-827 SPROCKET,BW-23T FWD-(13 WIDE/19 SPLINE) pwd metal 2602-828 SPROCKET,BW-19T FWD-(15 WIDE/19 SPLINE) pwd metal 2602-829 SPROCKET,BW-21T FWD-(15 WIDE/19 SPLINE) pwd metal 2602-830 SPROCKET,BW-22T FWD-(15 WIDE/19 SPLINE) pwd metal 2016 2 STROKE AND 4 STROKE BOTTOM 2602-831 SPROCKET,BW-35T(13 WIDE/34 SPLINE) pwd metal 2602-833 SPROCKET,BW-36T(13 WIDE/34 SPLINE) pwd metal 2602-834 SPROCKET,BW-37T(13 WIDE/34 SPLINE) pwd metal 2602-836 SPROCKET,BW-38T(13 WIDE/34 SPLINE) pwd metal 2602-745 SPROCKET,BW-41T(13 WIDE/34 SPLINE) cut steel 2602-790 SPROCKET,BW-48T(13 WIDE/34 SPLINE) cut steel 2602-758 SPROCKET,BW-49T(13 WIDE/34 SPLINE) cut steel 2602-746 SPROCKET,BW-50T(13 WIDE/34 SPLINE) cut steel 2602-940 SPROCKET,BW-53T(13 WIDE/34 SPLINE) cut steel 2602-941 SPROCKET,BW-54T(13 WIDE/34 SPLINE) cut steel 2602-874 SPROCKET,BW-48T(13 WIDE/34 SPLINE)ALUM alum 2602-875 SPROCKET,BW-49T(13 WIDE/34 SPLINE)ALUM alum 2602-876 SPROCKET,BW-50T(13 WIDE/34 SPLINE)ALUM alum 2602-939 SPROCKET,BW-50T(13 WIDE/34 SPLINE)ALUM alum 1702-402 SPROCKET,BW 40T TOS-ASSY 1702-403 SPROCKET,BW 49T TOS-ASSY 2016 4 STROKE TOP 1702-410 SPROCKET,BW-21T REV-(13 WIDE/33 SPLINE) pwd metal 1702-351 SPROCKET,BW-21T REV-(13 WIDE/33 SPLINE) cut steel 1702-382 SPROCKET,BW-22T REV-(13 WIDE/33 SPLINE) cut steel 1702-352 SPROCKET,BW-24T REV-(13 WIDE/33 SPLINE) cut steel 2016 BORG WARNER CHAINS 2602-837 CHAIN,BORG WARNER-84P (13 WIDE) 2602-743 CHAIN,BORG WARNER-86P (13 WIDE) 2602-760 CHAIN,BORG WARNER-90P (13 WIDE) 2602-744 CHAIN,BORG WARNER-92P (13 WIDE) 2602-944 CHAIN,BORG WARNER-96P (13 WIDE) 2602-838 CHAIN,BORG WARNER-84P (15 WIDE) 2602-839 CHAIN,BORG WARNER-86P (15 WIDE) 2602-840 CHAIN,BORG WARNER-90P (15 WIDE) 2602-841 CHAIN,BORG WARNER-92P (15 WIDE) 2602-945 CHAIN,BORG WARNER-98P (15 WIDE) 28 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

SPROCKETS & CHAIN // TEAM PERFORMANCE LINK BELT SILENT SPROCKETS & CHAIN PART NO. DESCRIPTION RETAIL 13 Wide Sprockets 34T Internal Spline 931064-008 36T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-009 37T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-010 38T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-011 39T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-012 40T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-013 41T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-014 42T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-001 43T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-002 44T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-003 45T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-004 46T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-005 47T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-006 48T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 931064-007 49T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $79.95 PART NO. DESCRIPTION RETAIL 13 Wide Sprockets 19T Internal Spline 931065-013 17T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-001 18T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-002 19T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-003 20T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-004 21T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-005 22T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-006 23T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-007 24T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-008 25T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-009 26T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-010 27T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-011 28T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 931065-012 29T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke $34.95 13 Wide Chain 2012-2013 800 AC 2-Stroke PRICE 970418 Link Belt Silent Chain. 13 Wide, 88 Link $94.95 970423 Link Belt Silent Chain. 13 Wide, 90 Link $89.95 OEM LINK BELT SPROCKETS & CHAIN APPLICATION: 2012-2015 2-Stroke Top Sprockets 13 Wide Sprockets 19T Internal Spline 2602-377 Top Sprocket, Link Belt Silent-21T (13 Wide) $43.95 2602-335 Top Sprocket, Link Belt Silent-22T (13 Wide) $43.95 2602-403 Top Sprocket, Link Belt Silent-23T (13 Wide) $43.95 APPLICATION: 2012-2015 4-Stroke Top Sprockets 13 Wide Sprockets 33T Internal Spline 1702-201 Top Sprocket, Link Belt Silent-21T (13 Wide) $16.95 1702-074 Top Sprocket, Link Belt Silent-22T (13 Wide) $16.95 APPLICATION: 2012-2015 2-Stroke & 4-Stroke Bottom Sprockets 13 Wide Sprockets 34T Internal Spline 2602-405 Bottom Sprocket, Link Belt Silent-36T (13 Wide) $63.95 2602-406 Bottom Sprocket, Link Belt Silent-36T (13 Wide) $63.95 2602-371 Bottom Sprocket, Link Belt Silent-37T (13 Wide) $63.95 2602-372 Bottom Sprocket, Link Belt Silent-38T (13 Wide) $63.95 2602-364 Bottom Sprocket, Link Belt Silent-48T (13 Wide) $63.95 2602-363 Bottom Sprocket, Link Belt Silent-49T (13 Wide) $63.95 *2602-276 Bottom Sprocket, Link Belt Silent-40T (13 Wide) $63.95 APPLICATION: 2012-2015 2-Stroke & 4-Stroke Chain 13 Wide Chain 2602-369 Chain, Link Belt Silent-84P (13 Wide) $118.95 2602-514 Chain, Link Belt Silent-86P (13 Wide) $118.95 2602-370 Chain, Link Belt Silent-90P (13 Wide) $118.95 APPLICATION: 2012-2015 2-Stroke Top Sprockets 15 Wide Sprockets 19T Internal Spline 2602-212 Top Sprocket, Link Belt Silent-21T (15 Wide) $43.95 2602-461 Top Sprocket, Link Belt Silent-22T (15 Wide) $43.95 APPLICATION: 2012-2015 4-Stroke Top Sprockets 15 Wide Sprockets 33T Internal Spline 1702-202 Top Sprocket, Link Belt Silent-21T (15 Wide) $16.95 1702-191 Top Sprocket, Link Belt Silent-22T (15 Wide) $16.95 1702-203 Top Sprocket, Link Belt Silent-24T (15 Wide) $16.95 APPLICATION: 2012-2015 2-Stroke & 4-Stroke Chain 15 Wide Chain 2602-365 Chain, Link Belt Silent-84P (15 Wide) $118.95 2602-373 Chain, Link Belt Silent-90P (15 Wide) $118.95 Shop online 24/7 Join our e-mail list online to receive our newsletter! 29

SNOWMOBILE ATV / UTV AUTOMOTIVE SPECIALTY TOOLS // YOU NEED THESE MAY NOT LOOK EXACTLY LIKE THIS! MAY NOT LOOK EXACTLY LIKE THIS! CLUTCH PULLERS Quick drive clutch removal for most machines. 0644-207 Arctic Cat, Arctic Round Shaft Primary Models (F-7) $31.95 0644-096 Arctic Cat, Comet Primary Models (Short Bolt W/Retainer Plug Style) $82.95 0644-100 Arctic Cat, Comet Primary Models (Long Bolt Style) $82.95 0744-080 Arctic Cat, 4-Roller Primary 2007 1000cc 2-Stroke & 1100cc 4-Stroke $41.95 0744-080 Arctic Cat, 2010-2016 Arctic Cat Models $41.95 CLUTCH ALIGNMENT TOOLS Establishes correct offset between drive and driven clutches. 0644-509 Arctic Cat, Parallelism Bar 2007+ Models $17.95 0644-320 Arctic Cat, Models With Reverse Cam Secondary (1.365 Offset) $25.95 0644-246 Arctic Cat, 1997 Models With Internal-Helix Secondary (1.562 Offset) $18.95 0644-428 Arctic Cat, Bearcat Wide Track Turbo Model (1.485 Offset) $19.95 0644-427 Arctic Cat, 10.0 ACT Roller Secondary Models (1.655 Offset) (M-Series / Crossfire) $19.95 0644-496 Arctic Cat, 10.4 ACT Roller Secondary Models (1.507 Offset) (F-Series / Z1 Turbo 2007+) $13.95 0644-428 2012-2016 Models $19.95 0644-588 2013 Models - (F4 Chassis) $12.95 UNIVERSAL PISTON PIN PULLER A must have for your tool box! There s nothing worse than bending a rod trying to get a wrist pin out with a hammer. This puller will fit almost anything. Pulls piston pins up to 127mm (5 ) in diameter and has 3 different threaded adaptors to pull pins as small as 10mm (.400 )in diameter. HSPCCT SPXPPP Universal Piston Pin Puller $69.95 SPXPPP CLUTCH COMPRESSION TOOL Used to compress the primary clutch while still on the snowmobile for easily changing flyweights. Will work on all models. HSPCCT Most Arctic Cat & Polaris Primary Clutches $38.90 SPXFWP UNIVERSAL FLYWHEEL PULLER This puller has pulled 95% of all flywheels we have ever come across! Constructed of the highest quality steel and anodized for protection making this thing tough. A must have for your tool box. You re sure to pick up a favor or two from your buddies when they need to borrow it. Comes with 3-8mm bolts and 3-6mm bolts to meet most applications. SPXFWP Universal Flywheel Puller $130.00 30 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

2009 & NEWER 1100CC 4-STROKE CLUTCH HOLDING FIXTURE Bolt this fixture to your work bench to securely and safely hold your primary clutch while servicing Arctic Cat 2009 and newer 1100cc 4-Stroke clutches. MADE IN THE USA! AC1100-CHF 2009-2015 1100cc 4-Stroke Clutches $105.95 AC1100-CHF 2012-2015 SPIDER NUT REMOVAL SOCKET Make sure you have the proper socket to remove the spider nut on your new machine. If you don t have the proper socket you will damage your spider nut and may have to purchase a complete new clutch to make changes. ACSS-12 2012-2015 Spider Nut Removal Socket $79.95 ACSS-12??? ARCTIC CAT SPIDER REMOVAL KIT Disassemble/assemble/remove spider on Comet and Arctic Cat drive clutches. 0644-449 Complete Kit (works on 2016 team primaries w/minor grinding for clearance) $246.29 0744-037 Handle $106.95 0744-036 Removal Tool $82.95 0644-380* Clutch Holder, 33mm $82.95 0744-035** Clutch Holder, 30mm $44.95 AC1100-CHF Clutch Holder - 2009 And Newer 1100cc 4-Stroke Clutches $105.95 0644-138*** Thin Wall Deep Socket, 1-7/16 in. $79.95 **Aid in assembling/disassembling of 108 & 102C Comet and Arctic Cat drive clutches. **Aid in assembling/disassembling of 108 & 102C Comet and Arctic Cat drive clutches. ***Remove and install spider nut on Arctic Cat round-shaft drive clutch. 0644-449 ARCTIC CAT DRIVEN PULLEY PULLER - ACT Remove ACT driven pulley from a corroded input shaft. Left-hand thread for models with a white sheave adjuster. Right-hand thread for models with a black sheave adjuster. 0644-469 ACT Driven Pulley Puller, Left-Hand Thread $28.95 0644-468 ACT Driven Pulley Puller, Right-Hand Thread $28.95 0644-468 ARCTIC CAT DRIVE CLUTCH SPANNER WRENCH Hold Comet and Arctic Cat round-shaft drive clutch in place during removal and installation. 0644-136 Arctic Cat Drive Clutch Spanner Wrench $50.95 0644-136 UNIVERSAL CLUTCH PRESS TOOL A revolutionary tool for servicing most primary and secondary clutches. For drive clutch service, this tool will compress the spring for easy cam arm changes or cover bolt removal. For driven clutch service, the tool will compress the helix and hold it in place for snap ring removal and installation. 8080 Clutch Press Tool $64.99 8080 TEAM CLUTCH TOOL Try our easy to use clutch spring compression tool. More compact and less expensive than competitors. You ll like the extra work space this tool won t take up! Made of durable, impact resistant aircraft quality steel. It s also corrosion resistant. 930001 Clutch Compression Tool For Team Clutches $79.00 930001 Shop online 24/7 Join our e-mail list online to receive our newsletter! 31

SNOWMOBILE ATV / UTV AUTOMOTIVE SUPERCHARGER KITS // ARCTIC CAT WILDCAT SUPERCHARGER KITS The performance gained with this kit will blow you away. Not only is the performance great but the quality of parts and service is unmatched as well. Standard Wildcat models will see 135 HP and X Models 150HP on pump gas. Race gas applications call!! WHAT ARE THE ADVANTAGES OF THE SPEEDWERX PROCHARGER KIT: Stock-like sound levels when using the stock exhaust Self contained oiling system (No oil pumps to worry about!) Lower under-chassis temps and charge tube temps when compared to a turbo set-up Instant throttle response Best fuel controller on the market Includes wet clutch delete on non X models Made in the USA! ACSC-WILDCAT-012 2012-2013 Standard Wildcat Models $6500.00 ACSC-WILDCATX-013 2013-2014 Wildcat X Models $6000.00 ACSC-WILDCATX-015 2015 Wildcat X Models $6000.00 KIT INCLUDES: Speedwerx Wet Clutch Deletion Kit on non X models Speedwerx Clutch kit Power Commander PCV boost ready controller Pro-Charger Supercharger & intercooler All necessary mounting brackets and hardware for complete install Blow off Valve High flow aluminum air box, charge tubes and inner cooler Larger injectors ACSC-WILDCATX-015 THIS SPEEDWERX PROCHARGER SUPERCHARGER KIT COMES AS A COMPLETE BOLT-ON KIT. OPTIONAL CONTENTS: AT-300 Dual Channel Auto Tune Module / A/F Ratio Gauge $399.99 POD-300 POD - 300 Data Viewer & Logger $249.95 AC1100BBK 1100cc Big Bore Kit With Pistons $1345.00 ACATVHP-2 Head Porting & 3 Angle Valve Job (Both Heads) $XXX.00 PRO-INSTALL Speedwerx Professional Install, Test & Tune $1000.00 ACWC-CHB Clutch Housing Blower Fan Kit $1000.00 MUFFLER Q6 or L2 $389.95 105 HP KITS // 105 HORSEPOWER KIT / ARTIC CAT 1000CC Want the most out of your 1000cc Wildcat / ATV / or Prowler? We have the kit to unleash a true 105 hp from your Arctic Cat machine. We will greatly improve the performance of your machine with our upgrades, this will unlock the full potential of your machine. ACWCX-105HP-KIT 2013-2015 WCX / 2015 PROWLER / 2015 ATVS $4099.95 ACWC-105HP-KIT 2012-2014 WC / 2008-2014 ATVS / 2010-2014 PROWLER $4099.95 KIT INCLUDES: Speedwerx 1100cc Big Bore kit Speedwerx Stage 2 Head Porting and Valve Job Speedwerx H5 Alloy Valve Springs Speedwerx Go Fast Cam Shafts Power Commander PCV Fuel Controller Speedwerx Slip-on Muffler L2 or Q-6 series Speedwerx Custom Forged Pistons 11:1 or 12:1 Optional upgrades: ACWC-CHB Clutch housing blower kit $399.95 Speedwerx Hypershift Clutch kit $199.95-239.95 Stage 3 Cylinder Head Porting add $1000.00 SPX-TBB Throttle Body Boring $300.00 ACWCX-105HP-KIT 32 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

CLUTCH HOUSING BLOWER KIT // CLUTCH HOUSING BLOWER KIT Keep your clutches cool- Heat destroys belts. Why purchase the Speedwerx blower kit over the competition: Helps prevent you the customer from spending 200.00 on each belt you to replace Its the only kit that modifies the stock clutch cover to draw fresh cool air into the clutches. Others pass air through the stock housing causing the air to heat up before it even gets to the clutches. Fan motor is mounted high behind the cockpit at shoulder level to help prevent water and debris from entering your clutch housing. In 20 minutes of riding, machines equipped with the Speedwerx clutch housing blower fan kit seen 50 degree lower temperatures compared to stock in the clutch housing area. Our blower kit utilizes a 12 volt DC in-line blower that we install to keep fresh cool air coming into your clutch housing. The intake is covered with a outwears type sock to help prevent debris and moisture out. We include a full wiring harness that does not require and splicing or soldering. Kit also features a toggle switch that mounts in the factory location next to the reverse override switch for a clean factory look. ACWC-CHB 2012-2015 WILDCAT / WILDCAT X $399.95 KIT INCLUDES: High Flow Blower Fan Wiring Harness On/Off Switch Water Proof Intake / Filter Screen Modified Clutch Cover ( core exchange program ) Required hardware Detailed Instructions Optional upgrades: 0806-112 Wildcat cover $ 199.95 0806-129 Wildcat X cover $ 164.95 ACWC-CHB WET CLUTCH DELETE KITS // ARCTIC CAT WET CLUTCH DELETE KITS This kit is designed to eliminate the inner wet clutch on the Arctic Cat 550/650/700/1000cc ATV and UTV lineup. The stock clutch design works good for longevity and durability, but it lacks in overall performance and tuneability. The Speedwerx Wet Clutch Deletion Kit will help eliminate the lag and power delay that these units have been known for as well as increase top speed. This kit removes over 4.5 lbs of rotating weight from the stock clutching set-up. The Primary clutch used is a Comet clutch that has been used in the snowmobile and ATV industry for 20+ years, it offers unlimited tuning and adjustability. This clutch is very similar to the primary clutches you see on all Polaris ATVs and Polaris and Arctic Cat Snowmobiles. The Speedwerx kit also comes 100 % complete and ready to install. The stock clutch cover is the only stock part we modify, all other parts can be returned to stock form if needed. The clutch cover is modified to accept the new primary clutch and we also put an oversized bearing in the clutch cover to help support the crank shaft to ensure everything stays in place. The machine will feel like it has 25-30 more hp than stock, it will be more responsive, accelerate faster and offer more tuneability than the stock configuration. KITS INCLUDE: New Primary Clutch w/ billet Speedwerx spyder Wet Clutch Elimination Shaft and lock collars Seal 1 Set of 3 Machined Clutch Weights H5 Alloy Primary Spring Helix Secondary spring Clutch puller Clutch alignment bar Alignment and deflection shims Replacement OEM gaskets Primary clutch bolt Modified Stock Clutch Cover w/ oversized bearing( new covers available at additional cost ) Primary Pilot ACPCC 2012-2013 Standard Wildcat Models $1800.00 ACPCC-1000MP All 1000 Mud Pro Models $1800.00 ACPCC-1000P All 1000 Prowler Models $1800.00 ACPCC-1000TC All 1000 Thundercat / XT Models $1800.00 ACPCC-550 All 550 ATV Models 09-13 $1800.00 ACPCC-550-2 All 550 ATV Models 14-15 $1800.00 ACPCC-550-3 All 550 XR / Prowler Models 15 $1800.00 ACPCC-550P All 550 Prowler Models 09-13 $1800.00 ACPCC-700 All 700 ATV Models 08-13 $1800.00 ACPCC-700-2 All 700 ATV Models 14-15 $1800.00 ACPCC-700-3 All 700 XR / Prowler Models 15 $1800.00 ACPCC-700MP All 700 Mud Pro Models $1800.00 ACPCC-700P All 700 Prowler Models 08-13 $1800.00 ACPCC THE BELOW TEST RESULT ARE WITH A WILDCAT 1000I HO MODEL! Speed at Distance: Stock 0-60 29.88 mph / Clutch Kit installed 30.20 mph Stock 0-250 45.67 mph / Clutch Kit installed 47.94 mph Stock 0-450 52.22 mph / Clutch Kit installed 55.53 mph Time at Speed info: Stock 0-30 MPH - 2.42 sec. / Clutch Kit installed 2.36 sec. Stock 20-50 MPH - 5.89 sec / Clutch Kit installed 4.89 sec. (1 Second Faster!) Stock 0-50 MPH - 7.24 sec. / Clutch Kit installed 6.23 sec. (1 Second Faster!) Time at Distance info: Stock 0-60 2.41 sec. / Clutch Kit installed 2.40 sec. Stock 0-250 5.74 sec. / Clutch Kit installed 5.62 sec. Stock 0-450 8.5 sec. / Clutch Kit installed 8.23 sec. Shop online 24/7 Join our e-mail list online to receive our newsletter! 33

SNOWMOBILE ATV / UTV AUTOMOTIVE ATV & UTV EXHAUST // SLIP-ONS ACWILDCAT-ATVP-2 AC1000-ATVP SLIP-ON EXHAUST SYSTEMS These ATV Slip-On Exhaust Systems are designed to increase power, add acceleration and throttle response, lose weight and give your quad a new deeper throatier sound. We try to keep noise levels to a minimum. Most of our slip-on systems will fall at or below 96 decibels. Carbureted units come with suggested jetting for sea level, summer time riding, if changes are needed. EFI units come with baseline Power Commander or Boondocker fuel controller settings if necessary. However, most systems will require no changes to the stock jetting or EFI mapping. All slip-ons are designed to fit with stock OEM bumpers. Some aftermarket bumpers may affect the sound of the machine. If so we do offer different end caps to route the exhaust outlet more downward so it will not echo off of the bumper. Silencers have a custom aluminum shell with steel cores and packing material. These cans are 100% rebuildable with all inner parts being removable. Our steel end caps can also be switched and/or converted over to a custom snorkel outlet set-up very easily. ARCTIC CAT YEAR PART # NOTES PRICE 366 Auto 4x4 FIS 08-11 AC366-ATVP $389.95 400 Auto TBX / TRV 06-13 AC400-ATVP-3 $389.95 425 CR 11-12 AC425-ATVP $389.95 450 Auto EFI / TRV 10-12 AC450-ATVP $389.95 450 XC Auto 11-13 AC450XC-ATVP $389.95 550/550s H1 Auto EFI 4x4 / TRV 09-13 AC550-ATVP $389.95 550 Prowler H1 / XT 09-13 ACPXT-ATVP $389.95 650 H1 Auto FIS / TBX / TRV 07-12 AC650-ATVP-3 $389.95 650 H1 Mud Pro 07-11 AC650-ATVP-3 $389.95 700/700s H1 Auto EFI 4x4 / TRV 08-13 AC700-ATVP-2 $389.95 700 Mud Pro 09-15 AC700-ATVP-2 $389.95 700/700s Prowler XT / XTX 08-13 ACPXT-ATVP $389.95 700 H1 Prowler HDX 11-13 AC700-ATVP-2 $389.95 700 Diesel 10-13 AC500-ATVP-2 $389.95 Wildcat Trail / Sport 14-15 ACWCTRAIL-ATVP $389.95 1000 Mud Pro 10-14 AC1000-ATVP $389.95 1000/1000s ThunderCat 4x4 / TRV 08-14 AC1000-ATVP $389.95 1000 Prowler XTZ 09-13 ACXTZ-ATVP $389.95 1000 HO WILDCAT/WILDCAT X 12-14 ACWILDCAT-ATVP-2 L2 SERIES $389.95 1000 HO WILDCAT/WILDCAT X 15 ACWILDCAT-ATVP-3 L2 SERIES $389.95 Q SERIES Our new Q6 series mufflers are purpose built and intended for the most extreme ATV / UTV conditions. They are made to increase power, add acceleration and throttle response, loose weight, and be maintenance free. Made out of 100 % stainless steel to prevent rust and corrosion, these mufflers are built to last. Q6-ACWCTRAIL-ATVP FEATURES: 10% hp gain No fuel controller needed ( better results with one though ) Lighter than stock Stainless steel Internal Spark arrestor Stock like sound levels No packing ( maintenance free ) 1 year full warranty Internals are washable for mudding applications Q SERIES YEAR PART # NOTES PRICE WILDCAT TRAIL / SPORT MODELS 14-15 Q6-ACWCTRAIL-ATVP $389.95 WILDCAT X MODELS 01-15 Q6-ACWILDCT-ATVP $389.95 550 XR MODELS 2015 Q6-XR550-ATVP $389.95 700 XR MODELS 2015 Q6-XR700-ATVP $389.95 1000 MUD PRO AND TRV MODELS 2015 Q6-AC1000-ATVP $389.95 700 MUD PRO 09-15 Q6-AC700-ATVP $389.95 34 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

HYPERSHIFT CLUTCH KITS // HYPERSHIFT CLUTCH KITS Our Hypershift Clutch Kits are one of the most valuable products available when it comes to enhancing the performance of your ATV/UTV. Each kit is designed and rigorously tested by the staff @ Speedwerx to insure that it will increase your machine s acceleration, backshift and all around performance. We offer kits for most applications. We have kits for stock machines, piped or slightly modified machines, stock machines with oversized tires, piped or slightly modified machines with oversized tires and kits for higher elevations as well. Most kits but not all include: primary spring, secondary spring, machined clutch weights and a compound radius helix. All of the proper ingredients to get your machine ahead of the competition and keep it there. Before ordering take a look at the application charts below to make sure you get the proper kit for your application. If you have a complete custom unit built for mudding, drags or whatever, let us know. Our clutching experts can help put a kit together for just about anything. One of the most popular mods for ATVs today is larger tires. We here at Speedwerx & Hot Seat Performance are aware of this and understand why you want larger tires. But when installing larger tires 9 out of 10 times your machine will be slower and/or less responsive. The way to make up for this drastic loss in power and response is to change your clutching so it matches the tires you re running. So if you re planning on installing larger tires on your machine, DON T FORGET TO CHANGE YOUR CLUTCHING! If you have any questions please call our tech line. CKA1000ATV Speedwerx & Hot Seat Performance have a full line of big wheel clutch kits available for 27 and larger tire sizes. However, some units with 29 or larger tires may require additional changes. If you have 29 or larger tires on your machine, please let us know and we will match your tire size with your other mods and assemble a kit that will put a smile on your face! CKAWILDCATX ARCTIC CAT CLUTCH KITS / STOCK OR PIPED MACHINES WITH STOCK TIRES! MODEL YEAR 0-2999 FT. PART # PRICE 3000-5999 FT. PART # PRICE 6000 FT. + PART # PRICE NOTES 366 Automatic 08-11 CKA366ATV $49.95 CKA366ATV-36 $49.95 CKA366ATV-6+ $49.95 550 Automatic H1 10-13 CKA550ATV-2 $199.95 CKA550ATV-36-2 $199.95 CKA550ATV-6+-2 $199.95 XR 550 2015 CKA550ATV-3 $ 189.95 CKA550ATV-36-3 $ 189.95 CKA550ATV-6+-3 $ 189.95 650 Automatic H1 05-12 CKA650ATV $134.00 CKA650ATV-36 $134.00 CKA650ATV-6+ $134.00 650 Automatic Prowler H1 07-09 CKAPXTATV-2 $130.00 CKAPXTATV-36-2 $130.00 CKAPXTATV-6+-2 $130.00 700 Automatic Mud Pro 11-14 CKAMPATV-2 $295.00 CKAMPATV-36-2 $295.00 CKAMPATV-6+-2 $295.00 Comes with 28 Tires Stock 700 Automatic H1 EFI / TRV 08-13 CKA700ATV-2 $184.00 CKA700ATV-36-2 $184.00 CKA700ATV-6+-2 $184.00 700 Auto Prowler H1 XTX EFI / HDX 08-13 CKAPXTXATV $363.00 CKAPXTXATV-36 $184.00 CKAPXTXATV-6+ $184.00 XR 700 2015 CKA700ATV-3 $ 189.95 CKA700ATV-36-3 $ 189.95 CKA700ATV-6+-3 $ 189.95 Wildcat Trail 14-15 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 Wildcat Sport 2015 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 1000 Mud Pro 10-14 CKA1000MPATV $295.00 CKA1000MPATV-36 $295.00 CKA1000MPATV-6+ $295.00 Comes with 28 Tires Stock 1000 Automatic Thundercat 08-13 CKA1000ATV $315.00 CKA1000ATV-36 $201.00 CKA1000ATV-6+ $201.00 1000 Automatic Prowler XTZ 09-13 CKAXTZATV $315.00 CKAXTZ-36 $201.00 CKAXTZ-6+ $201.00 1000 Auto WILDCAT HO 12-15 CKAWILDCAT $179.95 CKAWILDCAT-36 $179.95 CKAWILDCAT-6+ $179.95 1000 Auto WILDCAT X 13-15 CKAWILDCATX $239.95 CKAWILDCATX-36 $239.95 CKAWILDCATX-6+ $239.95 1000 Auto WILDCAT 4 13 CKAWILDCAT4 $CALL CKAWILDCAT4-36 $CALL CKAWILDCAT4-6+ $CALL ARCTIC CAT CLUTCH KITS / STOCK OR PIPED MACHINES WITH 27 + TIRES! MODEL YEAR 0-2999 FT. PART # PRICE 3000-5999 FT. PART # PRICE 6000 FT. + PART # PRICE NOTES 366 Automatic 08-11 CKA366ATV-27 $49.95 CKA366ATV-36-27 $49.95 CKA366ATV-6+-27 $49.95 550 Automatic H1 10-13 CKA550ATV-27-2 $199.95 CKA550ATV-36-27-2 $199.95 CKA550ATV-6+-27-2 $199.95 XR 550 2015 CKA550ATV-27-3 $ 189.95 CKA550ATV-27-36-3 $ 189.95 CKA550ATV-27-6+-3 $ 189.95 650 Automatic H1 06-12 CKA650ATV-27-2 $134.00 CKA650ATV-36-27-2 $134.00 CKA650ATV-6+-27-2 $134.00 700 Automatic H1 EFI / TRV 08-13 CKA700ATV-27-2 $184.00 CKA700ATV-36-27-2 $184.00 CKA700ATV-6+-27-2 $CALL 700 Auto Prowler H1 XTX EFI / HDX 08-13 CKAPXTXATV-27 $216.00 CKAPXTXATV-36-27 $184.00 CKAPXTXATV-6+-27 $184.00 XR 700 2015 CKA700ATV-27-3 $ 189.95 CKA700ATV-27-36-3 $ 189.95 CKA700ATV-27-6+-3 $ 189.95 Wildcat Trail 14-15 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 Wildcat Sport 2015 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 CKAWILDCATTRAIL $ 39.95 1000 Automatic Thundercat 08-13 CKA1000ATV-27 $201.00 CKA1000ATV-36-27 $201.00 CKA1000ATV-6+-27 $201.00 1000 Automatic Prowler XTZ 09-13 CKAXTZ-27 $201.00 CKAXTZ-36-27 $201.00 CKAXTZ-6+-27 $201.00 1000 Auto WILDCAT Standard 12-14 CKAWILDCAT-27 $179.95 CKAWILDCAT-36-27 $179.95 CKAWILDCAT-6+-27 $179.95 1000 Auto WILDCAT X 13-15 CKAWILDCATX-27 $239.95 CKAWILDCATX-36-27 $239.95 CKAWILDCATX-6+-27 $239.95 1000 Auto WILDCAT 4 13 CKAWILDCAT4-27 $CALL CKAWILDCAT4-36-27 $CALL CKAWILDCAT4-6+-27 $CALL Shop online 24/7 Join our e-mail list online to receive our newsletter! 35

SNOWMOBILE ATV / UTV AUTOMOTIVE HYPERSHIFT CLUTCHING COMPONENTS // 6-SERIES MACHINED ADJUSTABLE CLUTCH WEIGHTS ADJUSTABLE CLUTCH WEIGHTS These weights are designed specifically for the Artic Cat Wildcat X, Sport & Trail machines. These weights have more tip weight to them compared to stock for a more aggressive upshift and hardens belt squeeze later in the shift. Adjustable by about 2.5 grams heavier than listed wights. Adjustable weight kit sold separately ARTIC CAT CLUTCH WEIGHTS F-6 (50gr) $66.95ea G-6 (52gr) $66.95ea H-6 (54gr) $66.95ea I-6 (56gr.) $66.95ea J-6 (58gr) $66.95ea K-6 (60gr) $66.95ea L-6 (62gr) $66.95ea M-6 (64gr) $66.95ea N-6 (65.5gr) $66.95ea O-6 (68gr) $66.95ea P-6 (70.5gr) $66.95ea Q-6 (72.3gr) $66.95ea R-6 (74gr) $66.95ea S-6 (76gr) $66.95ea SPXAWK ADJUSTABLE WEIGHT KIT $15.95ea NOTE: NO BUSHINGS OR SET SCREWS NEEDED FOR THESE WEIGHTS ADJUSTABLE WEIGHT COMPONENTS ADJUSTMENT KIT/INDIVIDUAL COMPONENTS This kit comes with a base of set screws, button head screws, washers and loc-tite for fine tuning and adjusting your new speedwerx weights. With this kit you can add from 0.5g - 2.4g per weight. Individual parts are also available. SPXAWK ADJUSTMENT KIT SPXAWK Adjustment Kit $15.95 THREADLOCK TUBE 0150425 BLUE - MEDIUM $2.50 WASHERS 1175203 0.4g $0.30ea SET SCREWS 25165 (8-32 x 3/16 ) - 0.3gr $0.66ea 25167 (8-32 x 5/16 ) - 0.5gr $0.66ea 25168 (8-32 x 3/8 ) - 0.6gr $0.66ea 25169 (8-32 x 1/2 ) - 0.9gr $0.66ea BUTTON-HEAD SCREWS 24021 (8-32 x 3/16 ) - 0.9g $0.99ea 24022 (8-32 x 1/4 ) - 1.0g $0.99ea 24691 (8-32 x 5/16 ) - 1.1g $0.99ea 24023 (8-32 x 3/8 ) - 1.2g $0.99ea 24024 (8-32 x 1/2 ) - 1.5g $0.99ea CLUTCH SPRINGS These clutch springs are to be used for fine tuning calibration and set ups, depending on your tire size, elevation and/or riding conditions.. ARCTIC CAT WILDCAT SECONDARY SPRINGS 210412 78-198 - BLACK/RED/GREEN $24.95 210463 125-190 - BLACK W/PART # $24.95 210451 140-197 - BLACK W/PART # $24.95 210464 150-221 - BLACK W/PART # $24.95 0823-411 105-163 - BLACK $24.95 WILDCAT & WILDCAT TRAIL/SPORT 0823-386 PRIMARY ( OLD VERSION ) MEASURED @ 2.25 AND 1.25 0823-401 80-180 BLK/SIL COMES STOCK $14.95 0823-467 80-130 BLK/ORG $54.95 0823-469 77-158 RED/ORG/SIL $54.95 0823-472 90-153 BLK/RED/YEL $54.95 0823-471 92-181 BLK/RED/WHT $54.95 0823-470 100-182 BLK $54.95 0823-468 105-260 RED/GOLD/SIL $54.95 WILDCAT & WILDCAT TRAIL/SPORT 0823-496 PRIMARY ( NEWER VERSION ) MEASURED @ 2.25 AND 1.25 0823-500 51-151 BLK COMES STOCK $10.95 0823-509 65-115 BLK $62.95 0823-511 52-133 BLK $62.95 0823-514 77-134 BLK $62.95 0823-513 65-154 BLK $62.95 0823-512 77/158 BLK $62.95 0823-510 59/214 BLK $62.95 WILDCAT TRAIL/SPORT SECONDARY CLUTCH SPRINGS @ 2.345 AND 1.28 0823-523 115-190 BLK $62.95 0823-522 139-195 BLK $62.95 0823-443 104-173 BLK COMES STOCK $14.95 SPEEDWERX SPEC H5 ALLOY SECONDARY SPRING @ 2.5 AND 1.4 CCH5-p-115-190 115-190 BLK/PINK $39.95 ARCTIC CAT PRIMARY CLUTCH SHAFT SHIMS- FOR WET CLUTCH MODELS These shims are designed to space out the primary clutch on your machine, allowing the belt to rid up higher in the driven clutch, which in turn allows your machine to start off in a lower gear giving it a tourqier feel. Shim thickness depends on clutch and belt wear, some models will not allow for any shims due to clutch cover and belt clearance. C132017 C132017.060" WASHER $5.95 C132018.080" WASHER $5.95 SLICK SHIFT BEARING / DELRIN WASHER FOR WILDCAT TRAIL / SPORT MODELS Under development at the time of print. This washer / bearing is designed to eliminate spring binding between the spring and clutch to ensure maximum performance at tall times. This product is currently under development contact Speedwerx for updates $ CALL 36 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

HYPERSHIFT CLUTCHING COMPONENTS // ARCTIC CAT CLUTCH ROLLER WEIGHTS The primary function of the clutch roller weight is to control the engines operating rpm. We offer 4 different grams of rollers which will allow you to mix and match so you can come up with several different combinations in overall weight if you are tuning or setting up your own clutching. The other difference in our clutch rollers is the diameter. Our rollers are a smaller diameter than the stock units which opens up the primary clutch more and allows the belt to drop down in the primary clutch farther so you start off in a lower gear ratio, thus, giving you better acceleration, better throttle response, more pulling power and less belt slippage which means longer belt life. Our rollers also come as a complete assy. So you just have to drop them into place and go. There is no pressing, swapping or changing out existing parts with your stock ones to make these work. PART # WEIGHT PRICE ACCRW-15 15 Gram $17.10 ACCRW-20 20 Gram $17.10 ACCRW-25 25 Gram $17.10 ACCRW-30 30 Gram $17.10 STOCK WEIGHT CLASSIFICATIONS RED 18.5 Gram GREEN 23.5 Gram BLUE 21 Gram WHITE 17-27 Gram (Depends On Model) BLACK 33.5 Gram ACCRW-20 INNER WET CLUTCH SPRINGS (ENGAGEMENT SPRINGS) These springs will allow you to raise your machines engagement rpm for better acceleration and response! These springs will raise the engagement approx. 200-400 RPM. APPLICATIONS: 03-10 400 Auto 00-10 500 Auto 05-10 650 H1 Auto 06-08 700 EFI 06-10 650 Prowler H1 08-10 Thundercat 1000 / 08-10 Prowler 700 XTX 08-10 700 H1 09-10 700 Mud Pro 09-10 Prowler XTZ 1000 2010 1000 Mud Pro / Most Yamaha & Suzuki Models DESCRIPTION PART # ENGAGEMENT RPM PRICE 42 Lbs. Engagement Springs (5-Pack) 210267 1800 RPM $49.95 54 Lbs. Engagement Springs (5-Pack) 955556 2300 RPM $49.95 NOTE: Stock primary engagement springs are about 20-25 Lbs. - 1400 RPM! COMPRESSION SPRING TORSION SPRING SPEEDWERX NOTES: 2005 650 H1 STOCK 69-100 2006 Prowler H1 STOCK 150-200 Stock Arctic Cat Helix Style Models STOCK 160-200 (TORSIONAL) WILDCAT / 650/700 MUDPRO STOCK 190-235 1000 MUDPRO STOCK 195-275 PROWLER 550XT / 650 / 700XTX STOCK 120-160 ARCTIC CAT & SOME SUZUKI SECONDARY SPRINGS These secondary springs are designed to help fine tune and adjust the shifting characteristics to meet the needs for custom applications and/or clutch kits. We offer several different rates. These springs will not fit all models. The compression springs are designed for Arctic Cat quads without the new 06 updated clutch or 07 650 H1/Prowler 650 H1 secondary clutch with the removable helix. Our springs do not have tines on them for torsional load either. COMPRESSION SECONDARY SPRINGS These springs fit models with NON-HELIX style secondary clutches. PART # COLOR RATE PRICE CCS-350-150-250-200 RED 150-200 $29.95 CCS-350-175-250-225 BLUE 175-225 $29.95 CCS-350-200-250-250 LIME GREEN 200-250 $29.95 CCS-350-250-250-300 BLACK 250-300 $29.95 TORSIONAL SECONDARY SPRINGS These springs fit models with NON-HELIX style secondary clutches. PART # COLOR RATE COLOR PRICE 210268 500/650 H1/ AC & SUZUKI MODELS 75-150 BLACK $24.95 210301 400 AC MODELS ONLY 110-150 LIME GREEN $24.95 210275 500/650 H1/ AC & SUZUKI MODELS 84-119 YELLOW $24.95 TORSIONAL SECONDARY SPRINGS These springs fit models with HELIX style secondary clutches. PART # COLOR RATE PRICE CTH5-L-200-250 BLACK/BLUE 200-250 $39.95 CTH5-L-120-160 BLACK/WHITE 120-160 $39.95 CTH5-L-160-200 BLACK/RED 160-200 $39.95 CTH5-L-190-235 BLACK/ORANGE 190-235 $39.95 CTH5-L-195-275 BLACK/GREEN 195-275 $39.95 Shop online 24/7 Join our e-mail list online to receive our newsletter! 37

SNOWMOBILE ATV / UTV AUTOMOTIVE HYPERSHIFT CLUTCHING COMPONENTS // ARCTIC CAT WILDCAT X HELIXES With bigger tires or more horsepower, you need to adjust helix angle to optimize belt traction. 422194 50-60 Full $79.00 422195 52 Straight $79.00 420196 54 Straight $79.00 422197 56 Straight $79.00 422198 58 Straight $79.00 CUSTOM CALL TO ORDER $99.00 ARCTIC CAT SECONDARY HELIXES The secondary helix helps control upshift and backshift characteristics on your ATV. We offer a variety of angles to meet the needs for all applications. If you have any questions please contact our technical support department. PART # ANGLE PRICE ACATV54-44-.33 54-44-.33 $120.00 ACATV54-44-.46 54-44-.46 $120.00 ACATV50-44-.33 50-44-.33 $120.00 ACATV50-44-.46 50-44-.46 $120.00 ACATV30STR 30 Straight $120.00 ACATV45STR 45 Straight (Stock 2012-13 Wildcat Replacement) $120.00 NOTE: More angles coming soon! Custom angles available upon request! ECU RE-PROGRAMMING // WILDCAT / WILDCAT X / WILDCAT 4 ECU RE-MAPPING Speedwerx can re-map your stock ECU box to perform with better power, acceleration and top speed. Send us your ECU box and we will re-program it with our custom Stage I or Stage III performance programming STAGE I With the Stage I re-program you will get a raised rev-limit (8200 RPM). You will be required to use premium pump fuel at all times whe you have your ECU box reprogrammed by Speedwerx. STAGE III With the Stage III re-program you will get new fuel & ignition curves as well as a raised rev-limit (8200 RPM). You will be required to use premium pump fuel at all times whe you have your ECU box re-programmed by Speedwerx. *RPI-WC-1 Standard Wildcat Models - Stage I Re-Mapping $379.95 *RPI-WC-3 Standard Wildcat Models - Stage III Re-Mapping $379.95 *RPI-WC4-1 Wildcat Models - Stage I Re-Mapping $379.95 *RPI-WC4-3 Wildcat Models - Stage III Re-Mapping $379.95 *RPI-WCX-1 Wildcat X Models - Stage I Re-Mapping $379.95 0530-064 Stock ECU - Standard Wildcat Models $391.95 0530-099 Stock ECU - Wildcat X Models $391.95 *All prices above are for re-programming only! You will need to send us your ECU box or buy a new stock ECU box from us and we can send it to you after it has been re-programmed. RPI-WC-1 38 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

FUEL CONTROL // POWER COMMANDER POWER COMMANDER FUEL CONTROLLERS The Power Commander is a fuel injection adjustment unit that plugs inline with the bike s stock ECU (electronic control unit). The PC uses original equipment style connectors, so no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. PCV Changes are made to the bikes fuel and, in some cases, ignition curves via the PC s onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bike s ECU. Removing the PC returns the bike to its previous stock condition. Each unit comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file. PCIII USB POWER COMMANDER V (PCV): Reduced Size (Less than half the size of PCIII) USB Powered From Computer (9 Volt Adaptor is no longer needed for programming) 2 Position Map Switching Function Built In (Map switch not included) Gear / Speed Input (Allows for map adjustment based on gear and speed) 10 Throttle Position Columns (Up from 9 on the PCIII) Enhanced Accel Pump Utility (Increased adjustment and sensitivity ranges) Analog Input -100% / +250% Fuel Change Rate (Allows more adjustment range) (Allows user to use any 0-5 volt sensor and built an adjustment table based on its input such as boost or temperature) POWER COMMANDER III USB (PCIII): Works With Any Exhaust -100% / +100% Fuel Change Rate Expandable With: Ignition Module / Color LCD Display / Multi-Function Hub Easy Installation - No Cutting Or Splicing! ARCTIC CAT YEAR PCIII USB PRICE PCV PRICE 450 H1 2010-2012 11-008 $379.95 450 / 500 Models 2013 11-016 $379.95 550 H1 2009-2014 11-005 $379.95 700 Prowler XTX 2008 623-411 $369.95 700 EFI (Suzuki Engine) 2006-2007 616-411 $369.95 700 H1 2008 630-411 $369.95 700 H1 2009-2012 11-006 $379.95 700 Models 2013 11-014 $379.95 700 Wildcat Trail / Sport 2014-2015 11-019 $379.95 Thundercat 1000 / XT 2008 622-411 $369.95 Thundercat 1000 / XT 2008-2013 11-002 $379.95 *Thundercat 1000 2008-2013 11-011 $399.95 1000 TRV 2009 11-002 $379.95 *1000 TRV 2009 11-011 $399.95 1000 TRV/MudPro 2010-2014 11-017 $379.95 Prowler 1000 XTZ 2009-2013 11-001 $379.95 Wildcat 1000 HO 2012-2014 11-010 $379.95 Wildcat 1000 HO 2015 11-023 $379.95 * FUEL & IGNITION ADJUST POD-300 Handle Bar Mount AT-200 AUTO TUNE MODULE DYNOJET IS PLEASED TO BE ABLE TO BRING YOU THE LATEST IN TUNING ACCESSORIES. WE NOW OFFER A WIDE BAND AUTO TUNE KIT THAT CAN BE USED WITH ANY POWER COMMANDER V. The Dynojet Auto Tune Kit plugs into the PCV with a single cable. The only other connections needed are a +12 volt and a ground. With the Auto Tune Kit connected the user can specify what air/fuel ratio (how rich or lean) to make each specific RPM and throttle position % combination. This makes it possible to adjust cruise for best fuel economy as well as larger throttle openings for peak power. Dynojet includes base settings for the air/fuel ratios, but they are fully adjustable if need be. AT-200 Single Channel Single Cylinder - PCV Models Only! (Acts as an O2 Gauge!) $279.99 AT-300 Dual Channel Twin Cylinder - PCV Models Only! (Acts as a dual O2 Gauge!) $399.99 48292001 Replacement O2 Sensor for All AutoTune Kits $99.85ea POD-300 DATA VIEWER & LOGGER THE POD-300 IS AN ACCESSORY DISPLAY FOR DYNOJET DEVICES THAT SUPPORT DJ-CAN; INCLUDING THE POPULAR POWER COMMANDER V, AUTOTUNE, WIDEBAND 2, AND CMD. Simply connect the included CAN cable and you re ready to go; there s no need to tap power or deal with other messy connections. Need to adjust your tune in the field, or datalog the supported channels to further refine your tune? No problem, with the POD-300 you re just a few clicks away from taking advantage of the many features with it s easy to use menu system. Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio- (w/wb2 or AutoTune connected) Real time fuel adjustments Weather resistant for use in all conditions Log channels saved to internal memory and can be viewed / analyzed with Dynojet s PowerCore Software High contrast display, viewable in direct sunlight 3 Programmable light alarms 26300062 POD Commander - 300 Data Viewer & Logger $249.99 61300062 Handle Bar mount for POD Commander - 300 Display $59.95 76950145 6 Can Cable $14.00 76950143 18 Can Cable $ 14.00 76950117 36 Can Cable $15.00 76950690 6 Can Cable $16.00 76950680 10 Can Cable $ CALL 76950530 20 Can Cable $ CALL Shop online 24/7 Join our e-mail list online to receive our newsletter! 39

SNOWMOBILE ATV / UTV AUTOMOTIVE K&N // AIR AND OIL FILTERS K&N AIR FILTERS K&N Replacement Air Filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion even at high altitude. As a rule, no jet changes are required with just a K&N Filter Element, however the spark plug condition should be checked for proper mixture after the first few miles of riding. If the airbox has been modified for increased air flow, the main jet size will need to be increased to provide the proper fuel mixture. Replacement air filters are available for most street bikes, sport bikes, dirt bikes, cruisers, dual sport bikes, touring bikes, ATV s and more! HERE ARE SOME INTERESTING FACTS ABOUT K&N AIR FILTERS: DESIGNED TO INCREASE ACCELERATION & HORSEPOWER WASHABLE AND REUSABLE WILL NOT VOID US WARRANTY EMISSION LEGAL IN ALL 50 US STATES PL-1003 ARCTIC CAT YEAR AIR FILTER PRICE OIL FILTER PRICE ALL 250 / 300 06-13 KY-2504 $64.50 250/300 2x4 / 4x4 98-05 AC-3098 $65.00 KN-132 $6.49 366 08-11 KN-621 $13.49 400 Auto/Manual (not DVX) 06-13 AC-4004 $74.55 KN-621 $13.49 400/454 96-05 AC-4096-1 $61.53 KN-138 $13.99 500 98-02 AC-4096-1 $61.53 KN-138 $13.99 500 05-09 AC-4004 $74.55 KN-621 $13.49 550 H1 09-13 AC-7009 $65.00 KN-621 $13.49 650 V-Twin 04-06 AC-6504 $64.33 KN-204 $13.99 650 H1 05-06 AC-6504 $64.33 KN-621 $13.49 650 H1 07-12 AC-4004 $74.55 KN-621 $13.49 700 H1 / 700i 08-13 AC-7009 $65.00 KN-621 $13.49 700 SUZUKI MOTOR 06-08 KN-621 $13.49 650 PROWLER XT H1 06-07 AC-4004 $74.55 KN-621 $13.49 700 PROWLER XTX H1 EFI/LE 08-12 AC-7009 $65.00 KN-621 $13.49 1000 THUNDERCAT / Mud Pro 08-13 AC-1009 $65.00 1000 WILDCAT / WILDCAT X 12-15 AC-1012 $75.00 K&N OIL FILTERS Originally developed for demanding race applications, the K&N Premium Oil Filter is rapidly becoming a favorite among consumers for its durability and easy removal. Many of the K&N Technicians are racers and they insisted that the company offer an oil filter that corrected the headaches they experienced over the years changing oil filters. K&N Replacement Oil Filters features a new, high-quality rubber anti-drain back valve, an improved pressure relief valve, a strong inner core and a heavy duty base plate with an improved rolled seal. Spin-on oil filters feature a heavy-duty metal can with a 17mm cross drilled nut. KN-303 40 40 Speedwerx, Inc. 651.982.6020 or or 651.982.0600 www.speedwerx.com

SPECIALTY TOOLS // YOU NEED THESE CLUTCH PULLERS Quick drive clutch removal for most machines. 352251 ARCTIC CAT, 650 V-Twin Models Primary Clutch Puller $34.95 0744-080 Wildcat Models $41.95 MAY NOT LOOK EXACTLY LIKE THIS! CLUTCH ALIGNMENT TOOLS Establishes correct offset between drive and driven clutches. ABAR-AC1000 ARCTIC CAT, STOCK 1000cc Models STO Wildcat $24.95 MAY NOT LOOK EXACTLY LIKE THIS! UNIVERSAL CLUTCH PRESS TOOL A revolutionary tool for servicing most primary and secondary clutches. For drive clutch service, this tool will compress the spring for easy cam arm changes or cover bolt removal. For driven clutch service, the tool will compress the helix and hold it in place for snap ring removal and installation. 8080 Clutch Press Tool $64.99 8080 TEAM CLUTCH TOOL Try our easy to use clutch spring compression tool. More compact and less expensive than competitors. You ll like the extra work space this tool won t take up! Made of durable, impact resistant aircraft quality steel. It s also corrosion resistant. 930001 Clutch Compression Tool For Team Clutches $79.00 930001 TEST PLUG / ERROR CODE READER Test / reset error codes on Arctic Cat 700 EFI & 1000 EFI models. 0486-219 Test Plug / Error Code Reader $4.95 Shop online 24/7 Join our e-mail list online to receive our newsletter! 41

SNOWMOBILE ATV / UTV AUTOMOTIVE PERFORMANCE HEADERS // RACE CAR HEADERS FEATURES: - Tested and proven to be better against competition on the dyno and on the track. - 20 years experience manufacturing exhaust. - Three stage equal length primarys - Computer designed - Custom designs and fits available to meet engine builders or racers needs - Stainless systems are purged welded for the smoothest finish inside - 1000 s of feature wins - Built by racers, for racers! - Tri-y - 4-1 Merge - 4-1 Non Merge - Crate 602/604/525 - Mild Steel - Stainless Steel APPLICATIONS: Circle Track / Performance Street / Hot Rod / Drag Race / Off-Road / More CHASSIS AVAILABLE MB CUSTOMS SHAW TAYLOR SSR GRT J-CAR FASTTRACK FEGERS MASTERSBILT TRC HUGHES ELITE PRO MILLENIUM IMPRESSIVE SWARTZ ROCKET PIRECE HUSTLER BEAK BUILT AFFORDABLE BARRY WRIGHT CAPITAL made here. 42 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

HEADER // FLANGES / MUFFLERS / TURN DOWNS / HANGERS / BOLTS MUFFLERS Our mufflers are designed to be lightweight and reduce noise without sacrificing performance. PART # CHASSIS FIT DESCRIPTION PRICE MI2753 UNIVERSAL MUFFLER INSERT 2.75" ID FITS 3" EXHAUST $39.95ea MI335 UNIVERSAL MUFFLER INSERT 3.0" ID FITS 3.5" EXHAUST $39.95ea MI354 UNIVERSAL MUFFLER INSERT 3.5" ID FITS 4.0" EXHASUT $39.95ea M2753 UNIVERSAL SLIP-ON MUFFLER 3.0" EXHAUST $59.95ea M335 UNIVERSAL SLIP-ON MUFFLER 3.5" EXHAUST $59.95ea M354 UNIVERSAL SLIP-ON MUFFLER 4.0" EXHAUST $59.95ea SLIP-ON TURN-DOWNS PART # CHASSIS FIT DESCRIPTION PRICE TD3 UNIVERSAL TURN DOWN - SLIPS ONTO 3" TUBE $29.95ea TD35 UNIVERSAL TURN DOWN - SLIPS ONTO 3.5" TUBE $29.95ea TD4 UNIVERSAL TURN DOWN - SLIPS ONTO 4" TUBE $29.95ea INSERT MUFFLER HANGERS / MOUNTING TABS Additional hangers and supports help to reduce vibration & cracking. MT-12-3473 STAINLESS STEEL REAR SUPPORT / MOUNTING TABS $2.25ea SLIP-ON MUFFLER COATINGS PART # DESCRIPTION DETAILS PRICE EN-HEADERS ELECTROLESS NICKLE PLATING DOES INSIDE AND OUTSIDE TO PREVENT CORROSION $510.00/set CC-HEADERS CERAMIC COATING OUTSIDE ONLY $330.00/set HEADER BOLTS & NUTS 1123215 1/4"-20 X 3" SHC - STANDARD BLACK OXIDE BOLT $0.60ea 37260 STANDARD NUT $0.20ea 73470 1/4"-20 X 3" SHC - STAINLESS STEEL BOLT $1.30ea 70796 STAINLESS STEEL NUT $0.65ea TURN DOWN HEADER FLANGE BOLTS 1173540 3/8"-16 X 1" SHCS - STAINLESS STEEL $1.56ea 1123305 3/8"-16 X 1" SHCS $0.75ea Shop online 24/7 Join our e-mail list online to receive our newsletter! 43

SNOWMOBILE ATV / UTV MERGE COLLECTORS & MANDREL BENDS // WE WILL HAVE MORE APPLICATIONS AVAILABLE SOON! IF YOU ARE IN NEED OF A CUSTOM BEND OR IF YOU JUST HAVE A QUESTION, PLEASE CALL FOR MORE INFORMATION - 651-982-6020 MACHINED MERGE COLLECTORS SPEEDWERX, Inc. Merge Collectors (Header Collectors) are custom engineered and machined for each application. All of our Machined Merge Collectors are designed with a CAD software program and then they are CNC machined for precision. Merge Collectors combine high flow and high velocity to increase and broaden an engine s torque curve all the way to the horsepower peak and beyond. All of our products feature the highest quality fabrication and TIG-welding. Each collector is completely hand finished inside for proper flow. We can custom make each Machined Merge Collector to fit your application. If you need a specific inlet leg length or outlet length don t worry, we have you covered! AUTOMOTIVE MACHINED MERGE COLLECTORS - MILD STEEL PART # OD GAUGE MATERIAL PRICE MMC-1625-18-MS 1.625 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE MMC-1750-18-MS 1.750 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE MMC-1875-18-MS 1.875 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE MMC-2000-18-MS 2.000 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE MMC-2125-18-MS 2.125 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE MMC-2250-18-MS 2.250 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE MACHINED MERGE COLLECTORS - 304 STAINLESS STEEL PART # OD GAUGE MATERIAL PRICE MMC-1625-18-SS 1.625 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE MMC-1750-18-SS 1.750 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE MMC-1875-18-SS 1.875 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE MMC-2000-18-SS 2.000 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE MMC-2125-18-SS 2.125 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE MMC-2250-18-SS 2.250 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 15 BENDS (TRI-Y / COLLECTOR BENDS) - MILD STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE 15B-1625-3-18-MS 15 BEND 1.625 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 15B-1750-3-18-MS 15 BEND 1.750 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 15B-1875-3-18-MS 15 BEND 1.875 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 15B-2000-3-18-MS 15 BEND 2.000 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 15B-2125-3-18-MS 15 BEND 2.125 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 15B-2250-3-18-MS 15 BEND 2.250 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 15 BENDS (TRI-Y / COLLECTOR BENDS) - 304 STAINLESS STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE 15B-1625-3-18-SS 15 BEND 1.625 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 15B-1750-3-18-SS 15 BEND 1.750 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 15B-1875-3-18-SS 15 BEND 1.875 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 15B-2000-3-18-SS 15 BEND 2.000 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 15B-2125-3-18-SS 15 BEND 2.125 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 15B-2250-3-18-SS 15 BEND 2.250 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 44 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com JEREMY HOULE - MIDWEST MODIFIED

MERGE COLLECTORS & MANDREL BENDS // 45 BENDS - MILD STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE 45B-1625-3-18-MS 45 BEND 1.625 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 45B-1750-3-18-MS 45 BEND 1.750 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 45B-1875-3-18-MS 45 BEND 1.875 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 45B-2000-3-18-MS 45 BEND 2.000 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 45B-2125-3-18-MS 45 BEND 2.125 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 45B-2250-3-18-MS 45 BEND 2.250 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE 45 BENDS - 304 STAINLESS STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE 45B-1625-3-18-SS 45 BEND 1.625 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 45B-1750-3-18-SS 45 BEND 1.750 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 45B-1875-3-18-SS 45 BEND 1.875 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 45B-2000-3-18-SS 45 BEND 2.000 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 45B-2125-3-18-SS 45 BEND 2.125 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE 45B-2250-3-18-SS 45 BEND 2.250 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE U-BENDS (180 BEND WITH 6-8 LEGS) - MILD STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE UB-1625-3-18-MS U-BEND 1.625 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE UB-1750-3-18-MS U-BEND 1.750 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE UB-1875-3-18-MS U-BEND 1.875 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE UB-2000-3-18-MS U-BEND 2.000 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE UB-2125-3-18-MS U-BEND 2.125 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE UB-2250-3-18-MS U-BEND 2.250 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE U-BENDS (180 BEND WITH 6-8 LEGS) - 304 STAINLESS STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE UB-1625-3-18-SS U-BEND 1.625 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE UB-1750-3-18-SS U-BEND 1.750 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE UB-1875-3-18-SS U-BEND 1.875 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE UB-2000-3-18-SS U-BEND 2.000 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE UB-2125-3-18-SS U-BEND 2.125 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE UB-2250-3-18-SS U-BEND 2.250 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE COMBO BENDS (180 BEND WITH 45 TAIL ON ONE LEG) - MILD STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE CB-1625-3-18-MS 15 BEND 1.625 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE CB-1750-3-18-MS 15 BEND 1.750 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE CB-1875-3-18-MS 15 BEND 1.875 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE CB-2000-3-18-MS 15 BEND 2.000 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE CB-2125-3-18-MS 15 BEND 2.125 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE CB-2250-3-18-MS 15 BEND 2.250 3 18 GAUGE MILD STEEL CALL FOR CURRENT PRICE COMBO BENDS (180 BEND WITH 45 TAIL ON ONE LEG) - 304 STAINLESS STEEL PART # TYPE OD CLR GAUGE MATERIAL PRICE CB-1625-3-18-SS 15 BEND 1.625 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE CB-1750-3-18-SS 15 BEND 1.750 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE CB-1875-3-18-SS 15 BEND 1.875 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE CB-2000-3-18-SS 15 BEND 2.000 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE CB-2125-3-18-SS 15 BEND 2.125 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE CB-2250-3-18-SS 15 BEND 2.250 3 18 GAUGE STAINLESS STEEL CALL FOR CURRENT PRICE Shop online 24/7 Join our e-mail list online to receive our newsletter! 45

made here. made here. SPEEDWERX GOODIES // APPAREL / BANNERS / DECALS / KOOZIES CHECK ONLINE FOR NEW DESIGNS SPEEDWERX PERFORMANCE HOODY HOODY2012 Hoody, Black $45.00 (S-XL) HOODY2012 Hoody, Black $50.00 (2XL-3XL) SPEEDWERX PERFORMANCE T-SHIRT SPXTEE Black Speedwerx T-Shirt $20.00 (S-3XL) SPEEDWERX PODIUM POLO SHIRT SPXPOLO PodiumPolo, Black $45.00 (S-2XL) BEANIES SPXTH Beanie, Speedwerx $15.00 SPEEDWERX PERFORMANCE FLEX FIT CAP FFHATSM Flex Fit, Red/WHite/Blue S-M $24.00 FFHATLXL Flex Fit, Red/WHite/Blue L-XL $24.00 GFFHATSM Flex Fit, Green S-M $24.00 GFFHATLXL Flex Fit, Green L-XL $24.00 SPEEDWERX PERFORMANCE MESH-BACK CAP MBHATSM Mesh Back, Red/White/Blue $24.00 GMBHATSM Mesh Back, Green $24.00 THESE CAPS ARE ADJUSTABLE! BANNERS / DECALS SPEEDWERX BANNER SPXBANNER 94 Long x 34 Tall With Grommets $50.00 SPEEDWERX DECALS SPXD-S 6 Stick Anywhere Decal $1.00 SPXD-L 13 Windsheild Decal $3.00 SPXD-T 36 Trailer Decal $15.00 SPXHTD High Temp Decal (-40 to 350 Degrees) $9.95 CAN KOOZIE SPXKOOZIE Speedwerx Can Koozie $3.00 46 Speedwerx, Inc. 651.982.6020 or 651.982.0600 www.speedwerx.com

47

ORDERING POLICY / ORDER FORM ORDERS -- Our average shipping time is less than 3 working hours. All items can be checked for availability at the time you place your order. Your order is printed in our shipping department (If Not On Back Order) immediately after you hang up the phone. Therefore add-on items called in later must be placed on a separate invoice and are subject to additional shipping charges and the below small order fee if under $30.00. DROP SHIPMENTS -- In an emergency, we can drop ship an order to your customer for a fee of $10.00 plus applicable freight charges. PRICES -- A separate Master Price List is provided showing Dealer & Distributor cost, as well as the suggested retail prices. All prices are subject to change without notice. BACKORDERS -- Backorders are shipped on arrival. We will verify any backorder over 30 days old before shipping. SPECIAL ORDERS CANNOT BE CANCELLED OR RE- TURNED. RETURNS -- Return authorization is required. Call us for an RA number, clearly mark the outside of the package with the RA number, include a copy of the invoice and write down the reason for return and return the package freight prepaid. Credit cannot be issued for items purchased 30 days or more prior to return, discontinued items, special order or electrical parts. Returned merchandise must be in original package and in like new condition. A restocking fee will be charged on all returns except items that are determined to be defective or not as ordered. WARRANTIES AND GUARANTEES -- Items under question of warranty may be replaced or IN SOME CASES returned for house credit. If the problem is fixable it will be fixed and returned to you. Cash refunds are not allowed. We require you to call in for a return authorization for your warranty work. Please include a detailed note explaining length of time used, cause of failure and any other necessary information. SHORTAGES OR DAMAGED MERCHANDISE -- Must be reported at the time the package is opened - NO EXCEPTIONS. All orders are checked for accuracy after picking and are weighed to give us three ways of checking. ALL BOXES AND PACKING MUST BE SAVED and returned to Hot Seat Performance, Inc. or Speedwerx, Inc. in most cases to receive credit for shortages. We will pay for postage. REFUSED C.O.D. -- Our FULL restocking fee, plus freight both ways will be charged to your account if you change your mind and refuse a C.O.D. FREIGHT CLAIMS -- UPS SHIPMENTS: Indicate DAMAGED when signing. CARTON AND MERCHANDISE MUST BE KEPT. Contact us by phone for instructions. DEALERS ONLY -- We require that you have a business name and be listed in the phone book doing business as (1) a franchised snowmobile or ATV dealer, (2) a retail store advertising and having an inventory of snowmobile and ATV accessories or (3) full-time recreational vehicle repair shop. A repair shop must have a retail display of snowmobile or ATV accessories in order to buy anything other than repair parts. To apply for dealership submit request on your business letterhead and enclose a copy of your business license. You must have a business phone number (NOT your residence). We prefer to have a photo of your business showing your business sign. If dealership is a new business, we will require a photo for our files. We reserve the right to refuse selling to anyone we feel does not meet our dealer qualifications. If you are not a legitimate dealer, PLEASE DO NOT WASTE YOUR TIME AND OURS. We reserve the right to requalify dealer status at any time. CREDIT TERMS -- All customers will receive orders on a C.O.D. or Credit Card basis except those who have established an open account with us and they will receive orders under our regular terms. All invoices are due payable 30 days following the date of purchase. All past due accounts will be charged the maximum legal rate of interest. Open accounts lapsing into 60 day balance will revert back to C.O.D. status. We send out statements monthly, however you may request a statement whenever necessary. All merchandise purchased from Hot Seat Performance, Inc. or Speedwerx, Inc. remains our property until the account is paid in full. Checks returned unpaid for any reason are subject to a $20.00 charge. NEW ACCOUNTS -- Orders are normally shipped pre-paid on a credit card that you provide. Open account status may be established by well-rated firms. To establish an open account, request a credit application when ordering. Please allow 30 days for processing the credit application! We reserve the right to reject any application. 48 MINIMUM ORDERS - Service Charges -- We have no minimum order. However, all orders totaling less than $30.00 dealer cost are automatically charged a $5.00 small order fee to cover telephone and processing costs.

IMPORTANT READ BEFORE ORDERING! WARNING: THE HIGH-PERFORMANCE PRODUCTS LISTED IN THIS CATALOG ARE NOT FOR INSTALLATION OR OPERATION BY CONSUMERS, AS DEFINED BY MAGNUSON-MOSS WARRANTY ACT! DO NOT order any performance parts or services unless you have the technical ability to properly set-up the entire machine to compensate for the installation of those parts. References in many of our literature to bolt-on parts, only indicates the parts are removable from the engine (as opposed to porting or machining type modifications). It is not meant to imply that the parts can be installed without additional modification. The necessary work and expertise needed to install different products varies. Instructions, where provided, are given to assist in installation only; they are NOT a substitute for mechanical experience in setting up racing snowmobiles, watercraft or land based vehicles. References to performance gains, reliability, ease of installment, etc. are based on our, and outside customer s experiences. This is NOT a guarantee of similar performance in every installation. While we sell proven hardware, in the end it s up to the individual racer to make the most of that hardware in his/her application. COMPANY NAME PHONE ADDRESS (NO P.O. BOXES) CITY / STATE / ZIP SHIPPING PREFERENCE: (CIRCLE ONE) UPS GROUND UPS NEXT DAY AIR UPS SECOND DAY AIR UPS THREE DAY SELECT PAYMENT METHOD: (CIRCLE ONE) VISA MASTERCARD DISCOVER MONEY ORDER CREDIT CARD INFORMATION: (CARD NUMBER) EXPIRATION DATE: VERIFY BILLING ADDRESS: (WHERE DOES YOUR CREDIT CARD STATEMENT GET MAILED TO?) MODEL AND YEAR OF MACHINE: QTY EACH TOTAL PRICE ORDERS CAN BE FAXED 24 HOURS A DAY 651.982.0630 MAIL TO: SPEEDWERX, INC 20195 GREYSTONE AVE. FOREST LAKE, MN 55025 SUBTOTAL TAX (6.875 %) MN ONLY SHIPPING GRAND TOTAL Shop online 24/7 Join our e-mail list online to recieve our newsletter! 49

HEADQUARTERS SPEEDWERX, INC. 20195 GREYSTONE AVENUE N. FOREST LAKE, MN 55025 - USA PHONE: (651) 982-6020 FAX: (651) 982-0630 WW.SPEEDWERX.COM WORLDWIDE DISTRIBUTORS ECHO CYCLE D&L PERFORMANCE 15311 118TH AVENUE EDMONTON, ALBERTA T5V-1C3 TOLL FREE: 877-438-3246 LOC AL: 780-447-3246 FAX: 780-455-5815 SPEEDWER X@ECHOC YCLE.COM WWW.ECHOC YCLE.COM 673 ROSSITER ST-JEAN-SUR-RICHELIE, QUEBEC J3B-8A4 PHONE: 450-359-7858 FAX: 450-359-9257 MCOSSET TE@DLPERFORM.COM WWW.DLPERFORM.COM COUNTRY CORNERS DISPONENT VAGEN 11C 975 94, LULEA SWEDEN PHONE: +46702105306 WWW.MNPROD.SE 586 MAIN STREET EXETER, ONTARIO N0M-1S1 PHONE: 519-235-3456 FAX: 519-235-0770 PARTS@COUNTRYCORNERS.NET WWW.COUNTRYCORNERS.NET SWEDISH MOUNTAIN PRODUCTS WESTERN POWER SPORTS 601 EAST GOWEN ROAD BOISE, IDAHO 83716 PHONE: 208-376-8400 DEALER PHONE: 800-999-3388 INFO@WPS-INC.COM WWW.WPS-INC.COM