89
Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available Nonwetted stem threads Specifications Pressure Rating 1 psig (bar) Temperature Rating 2 F ( C) 316 Stainless Brass *Steel Hard Seat Soft Seat Hard Seat Soft Seat Hard Seat Soft Seat 1, (689) 1 to 2 (23 to 93) 6, (413) 6, (413) 1 to 2 (23 to 93) 3, (26) 1, (689) 1 to 2 (23 to 93) 6, (413) For pressure ratings of valves with the tube fitting end connections, see CBCLok or CSLok catalogs Temperature ratings based on working temperatures of standard stem seals See oring/packing options for temperature ratings of optional stem seals and soft seat valve Valves with PTFE packings have a max pressure rating of 6 psi. 1a * Steel valves are Zinc, Nickel plated for corrosion resistance Materials of Construction # Component Brass Steel 1a Mini "T" Handle N/A Steel 1b "T" Handle N/A Steel 1c Round Knurled Handle Brass Steel 1d 1e 2 3 4 13/8" Plastic Handle 1 Plastic Handle Set Screw Dust Cap 1 Valve Bonnet Phenolic Phenolic Steel Vinyl Brass Steel 5 Chromeplated Valve Stem 6 Bonnet Lock Pin 1 N/A Steel 7 Stem Backup Ring PTFE 8 Stem Oring Fluorocarbon FKM 9 Valve Body Brass Steel 1c 1e 3 Testing Tylok Screwed are 1% Helium leak tested to 1x14 ml/s ensuring performance and reliability 6 9
Straight Pattern Angle Pattern F F CBCLok double ferrule tube ends are completely interchangeable with Swagelok and Parker ALok tube ends. E open J open CSLok single ferrule tube ends are completely interchangeable with Parker CPI tube ends. D C A B G H1 End Connections Inlet/ Size Outlet in. CBCLok Tube Fittings CSLok Tube Fittings Female NPT 3/8 3/8 1/8 3/8 3/4 Basic Part Number 46DD4 66DD6 86DD8 46SS4 66SS6 68SS6 26FF2 46FF4 66FF6 86FF8 126FF12 Orifice in (mm).187 (4.8).172 (4.8).187 (4.8).187 (4.8) Cv Hard Seat (Soft Seat/Tip).37 (.37).44.37 (.37).44.42 (.42).44 (.76) Dimensions in. (mm) A B C D E *F G H1 J 2.46 (62.5) 3.8 (78.2) 3.3 (83.8) 2.46 (62.5) 3.8 (78.2) 3.3 (83.8) 1.23 (31.2) 1.54 (39.1) 1.65 (41.9) 1.23 (31.2) 1.54 (39.1) 1.65 (41.9).91 (23) (31.7).33 (8.4).37 (9.4).33 (8.4).37 (9.4).38 (9.7) 1" 1" 1" 2.17 (55.1) (54.1) 2.17 (55.1) (54.1) 1.5 (38.1) 2. (5.8) 3.66 (93) 1 1 166FF16 26FF2.438 (11.1) 2.7 (54) 2" 1 246FF24 Male NPT Male/Female NPT 1/8 1/8 3/4 26MM2 46MM4 26MF2 46MF4 86MF8 126MF12.44 (.76).42 (.42).42 (.42).44 (.76) 3.5 (88.9).91 (23).91 (23).38 (9.7).38 (9.7) 1" 1.5 (38.1) 1.75 (5.8) 2. (5.8).72 (18.3).72 (18.3) 3.66 (93) 1 1 166MF16 26MF2.438 (11.1) 2.7 5.25 (133.4) (54) 2" 1 246MF24 * Soft stem tips use a smaller length handle. * Special configuration options are shown as general guidelines, not all options are available with every configuration. 91
Panel Mount Details 15/16 Hex Nut.16 Thick 5/818 Thread 15/16 Hex Nut.16 Thick 5/818 Thread 1/8 Max Panel 3/16 Max Panel 7/16 7/8 11/32 Dimensions for: Square Bar Stock and Smaller Angle Valves Dimensions for: Hex Bar Stock Angle Valves Handle Options 113/16 2 4 (3/4 & Up Valves) 1 RD 3/8 H1 H3 5/32 1 3/8 1 3/8 27/32 1 1/16 H4 H5 Standard Handles Brass Steel Square Bar Stock and " Small Angle Valves H1 H3 H1 Hex Bar Stock and " Angle Valves N/A The handle material will always match the valve body, unless otherwise specified. 92
Pressure vs. Temperature 6 Pressure (psi) 5 4 3 2 1 2 4 6 8 1 Temperature (F ) Steel Needle Valve with Graphoil* Packing Steel or Stainless Steel Needle Valve with PTFE Packing Stainless Steel Needle Valve with Graphoil* Packing Brass Needle Valve with PTFE or Graphoil* Packing 93
Flow Data at 1 F (37 C) Orifice (.172) Hard & Soft Seat (NPT) Orifice (.172) Hard & Soft Seat (Tube Fittings).45.4.35.3.25.2.15.1.5 Orifice (.172) Hard & Soft (NPT) 1 2 3 4 5 6.5 Orifice (.187) Hard Seat.45.4.35.3.25.2.15.1.5 1 2 3 4 5 6.8.7.6.5.4.3.2.1 t at at 3 2.5 2 1.5 1.5 1 2 3 4 5 1 2 3 4 5 6 7 8 9 ORing/Packing Options Temperature Ratings: 1 F to 2 F with Fluorocarbon FKM ORing 65 F to 15 F with EPDM ORing 13 F to 3 F with Kalrez ORing 65 F to 25 F with Teflon ORing 2 F to 4 F with Graphoil Packing 2 F max with Soft Seat/Tip Valves Packing Screw enables easy adjustments Packing Washers fully support packing Packing Teflon & Graphoil 94
Screwed are ordered as listed in this catalog by inserting the material code before the part number. Special configurations available upon request. Example: A Stainless Steel Needle Valve with CBCLok Tube Fitting inlet to CBCLok Tube Fitting outlet with 2 nut panel mount option, Graphoil Packing and 13/4 phenolic handle is designed as follows. SS 8 6 DD 8 P2 G H5 Material Inlet Size Style Inlet/Outlet Inlet Size SS Chart 1 Material Stainless Steel Options Chart 4 Inlet/Outlet Port Designator Inlet Outlet Handle Chart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7 Seal S B Steel Brass Chart 2 Valve Series Designator 4 6 8 12 16 Valve Size 2 1/8" 2 24 " 3/8" " 1" 1" 1" A L P1 P2 DD SS MM FF MF Chart 5 Options Angle Pattern Delrin Soft Stem/Seat Panel Mount (1 Nut) Panel Mount (2 Nut) Chart 6 Stem Seal CBCLok Tube Fitting CSLok Tube Fitting Male NPT Female NPT Male NPT CBCLok Tube Fitting CSLok Tube Fitting Male NPT Female NPT Female NPT Chart 7 Handle Options H1 Mini "T" Handle H3 H4 H5 "T" Handle Round Knurled Handle 13/8" Phenolic Handle 1 Phenolic Handle Chart 3 Style 6 Needle Valve EM1 KZ1 G T EPDM 8 ORing Kalrez 318 ORing Graphoil Packing PTFE Packing * Fluorocarbon FKM ORing is standard * See handle options section for standard handles * Special configuration options are shown as general guidelines, not all options are available with every configuration. Consult factory for details. Example: SS66DD6P2T Designates a Stainless Steel Needle Valve with 3/8 CBCLok Tube Fitting inlet to 3/8 CBCLok Tube Fitting outlet with 2 nut panel mount option, and optional Teflon Packing. 95