Page: 1 of 5 Linealuce Mini creates a linear luminous band that is designed to illuminate surfaces evenly. In ground or wall recessed luminaire for exterior applications. Suitable for most architectural applications, available in 3 sizes that can be installed as single elements or in continuous rows. Luminaire characteristics: Source: SPOT OPTIC FLOOD OPTIC Lumen maintenance: Power input: 4W/ft (Remote fixture only) Lumens: 170lm/ft (for 3000K, 80CRI) Luminaire efficacy: 40lm/W White LED, (LM80 tested) 3000K, 4000K: 80CRI >80% of initial lumens at 100 000 hours (L80) Optics: Spot or Flood optic. Spot optic suitable for wall grazing application. Material: Body: Extruded aluminum and diecast aluminum end caps Conection box: PPS (polyphenylene sulfide) Diffuser: Transparent glass screen, factory sealed. Luminaires with flood optic are supplied with non skid glass. Hardware: Stainless steel screws and silicone gasket. Mounting: Multiple options of continuous rows using three different lengths: 2, 3.5 and 5.5 feet. Wall or ground recessed with back box. Ground recessed must have 8" gravel below the luminaire to allow for proper drainage. Electrical: See remote power supply options on page 5. Temperature of operation: 22 F to 113 F (30 C to 45 C) Finish: Gray (RAL9007) painted finish with a high level of weather and UV resistance. The semigloss finish coating is electrostatically applied, durable acrylic enamel baked at high temperatures for superior color retentive finish. Weight: 1.52lbs/ft (0.69kg/ft) Load capacity: Maximum static load 2200lbs (1000kg) Warranty: 5 year limited warranty Ratings: IP67, IK09. Contact temperature: Less than 104 F (40 C) Certification: culus listed for Wet location
LENGTHS Page: 2 of 5 DIMENSIONS NOMINAL LENGHTS WATTS SINGLE ELEMENTS L 2' L : 21¾" (552mm) 3.5' 14 L : 42½" (1080mm) 5.5' 2⅛" (55mm) 7.4 20.8 L : 63⅜" (1609mm) 3" (76mm) 2⅞" (74mm) CONTINUOUS ROWS APPLICATION Single elements can be combined to obtain a linear continuous row with a single feed point. Interconnecting power cable and hardware are preconfigured at the factory and supplied with the luminaires. To get the desired length, simply choose standard modules to combine (example: A+B). For inline modules (B), no feed is required. *Note that 2mm spacing minimum is required for continuous rows installation. A Feed 3⅛" (79mm) SIDE VIEW B 2' 5.5' 7.5' 1/16'' (2mm) CONTINUOUS ROWS EXAMPLES Nominal length 7.5' 9' 11' 12.5' 14.5' 16' 18' 19.5' 21.5' 23' 25' 26.5' Exact length 7' 1¼" 8' 10" 10' 6⅞" 12' 4⅝" 14' 1⅜" 15' 10¼" 17' 8" 19' 4⅞" 21' 1⅝" 22' 11½" 24' 8¼" 26' 5" Single elements qty 1 x 2' + 1 x 5.5' 1 x 3.5' + 1 x 5.5' 2 x 5.5' 1 x 2' + 2 x 5.5' 1 x 3.5' + 2 x 5.5' 3 x 5.5' 1 x 2' + 3 x 5.5' 1 x 3.5' + 3 x 5.5' 4 x 5.5' 1 x 2' + 4 x 5.5' 1 x 3.5' + 4 x 5.5' 5 x 5.5' Watts 28.2 34.8 41.6 49 55.6 62.4 69.8 76.4 83.2 90.6 97.2 104
Page: 3 of 5 PHOTOMETRIC DATA Visit iguzzini.com/us for complete photometric data. SPOT CCT CRI (K) 3000K 4000K 80 LOAD LUMENS EFFICACY (W/ft) (lm/ft) (lm/w) 4W/ft MODELS 175 44 I.LMRSPL3 195 49 I.LMRSPL4 125 32 I.LMRFLL3 140 35 I.LMRFLL4 170 5 400 150 4 500 130 3 600 2 700 110 1 800 900 CD 0 90 0 H 3000K 80 CRI Spot 12 3.5' L. FLOOD 3000K 4000K 80 4W/ft 170 430 150 358 130 287 215 110 143 72 90 CD 0 0 H 3000K 80 CRI Flood 46 3.5' L. MOUNTING ACCESSORIES (INCLUDED) M1 Back box for concrete installation M2 Back box with 7⅞" safety cable for wall application = + = INSTALLATION For in ground installation the appropriate drainage must be provided, 8" gravel below the luminaire to allow proper drainage. The appropriate flow of water away from back box is necessary to maintain the longevity of the system.
Page: 4 of 5 SPOT OPTIC FOR GRAZING APPLICATION FEED OPTIONS (INCLUDED) Choosing between right or left feed matters for the direction of a wall grazing application. R Right feed Wall Driver on the Right Leader cable (w/ male connector) 5" L Left feed Driver on the Left Leader cable (w/ female connector) Install 5" (127mm) from surface to eliminates dark areas between luminaires. N No feed (for inline modules) ORDERING INFO I.LMR RESET 15 FIXTURE MODEL I.LMR OPTICS SP Spot FL Flood LED COLOR L3 3000K L4 4000K NOMINAL LENGTH Refer to length table on page 2. MOUNTING NA No accessories M1 Back box M2 Back box with 7⅞" safety cable L Left N No feed (For inline modules) FEED POSITION R Right FINISH 15 Gray
Page: 5 of 5 REMOTE POWER SUPPLY OPTIONS Requirement for one (1) fixture: 4W/ft, 24V (Remote fixture only) Load Voltage Dimming protocol 60W* 120277V 120W* 240W* 75W* 120277V 200W* 120277V Box dimensions Max distance 18AWG Code 44480024060UNVND 44480024120120ND 44480024240120ND 45450024075UNVND Per channel 454600242002CUNVND DRY LOCATION WET LOCATION 11¼" x 3" x 1⅝" (285 x 75 x 41mm) 12¼" x 4½" x 2⅜" (311 x 114 x 60mm) * The Total power of all connected luminaires may not be higher than the power of the driver. ** Contact factory for longer remote distance. SUGGESTED WIRING DIAGRAM The Linealuce MINI integral electronic circuits are designed to eliminate voltage drop and are capable to provide constant light output with voltage as low as 19V. or 277V REMOTE DRIVER Sold separately 24V AWG14 min. 19V *See max. distance for remote power supply options.