EESTI STANDARD EVS-EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm EESTI STANDARDIKESKUS
EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 12712:2000 sisaldab Euroopa standardi EN 12712:2000 ingliskeelset teksti. Käesolev dokument on jõustatud 17.07.2000 ja selle kohta on avaldatud teade Eesti standardiorganisatsiooni ametlikus väljaandes. Standard on kättesaadav Eesti standardiorganisatsioonist. This Estonian standard EVS-EN 12712:2000 consists of the English text of the European standard EN 12712:2000. This document is endorsed on 17.07.2000 with the notification being published in the official publication of the Estonian national standardisation organisation. The standard is available from Estonian standardisation organisation. Käsitlusala: This European Standard specifies the characteristics and dimensions of jerricans, manufactured from plastics with a nominal capacity of 20 litres to 60 litres for optimal utilisation of pallet sizes of 800 x 1200, 1000 x 1200 and 1140 x 1140 mm. Scope: This European Standard specifies the characteristics and dimensions of jerricans, manufactured from plastics with a nominal capacity of 20 litres to 60 litres for optimal utilisation of pallet sizes of 800 x 1200, 1000 x 1200 and 1140 x 1140 mm. ICS 55.140 Võtmesõnad: Eesti Standardikeskusele kuulub standardite reprodutseerimis- ja levitamisõigus
EN 12712 ICS 55.140 Descriptors: January 2000 English version Plastic jerricans Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm é 1200 mm, 1000 mm é 1 200 mm and 1 140 mm é 1 140 mm Jerricanes en matières plastiques Jerricanes d une capacité nominale de 20 l à 60 l pour utilisation optimale des palettes 800 mm é 1 200 mm, 1 000 mm é 1200 mm et 1140 mm é 1140 mm Kunststoffbehältnisse Kanister mit einem Nennvolumen von 20 l bis 60 l für optimale Nutzung der Paletten 800 mm é 1 200 mm, 1 000 mm é 1 200 mm und 1140 mm é 1140 mm This European Standard was approved by CEN on 1999-11-06. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 2000. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN 12712 : 2000 E
Page 2 EN 12712 : 2000 Contents Page Foreword.......................................... 2 1 Scope.......................................... 3 2 Normative references.............................. 3 3 Terms and definitions............................. 3 4 Requirements.................................... 4 5 Designation...................................... 6 Annex A (normative) Capacity measurement method for plastics jerricans............................ 9 Annex B (normative) Draining test method for plastics jerricans.................................. 11
Page 3 EN 12712 : 2000