AGF Manufacturing Inc. i s e rack Model 8511 re-assembled iser with Hose est Connection, Ea ndai valve, and ptional ressure educing Valve izes: 1½" 2" 2½" 3" 4" 6" Base Model 8511 B--8511_19 1/19 eliability, Versatility, Code Compatibility
i s e rack i s e rack Model 8511 Flow witch Hose est Connection Manifold hutoff Valve ressure Gauge Ea ndai valve he AGF iserack Model 8511 is a pre-packaged floor control riser assembly designed for FA 13 wet fire sprinkler systems. Model 8511 manifolds feature a hose test connection, Ea ndai valve, flow switch, and pressure gauge with shutoff valve. Model 8511 manifolds are available separately or with an optional ressure educing Valve. IZE AGF Item ID Description 1½" 8530 1½" M8511 x 3/8" rifice 8531 1½" M8511 x 7/16" rifice 8532 1½" M8511 x 1/2" rifice 8533 1½" M8511 x 17/32" rifice 8534 1½" M8511 x 5/8" EL rifice 2" 85 2" M8511 x 3/8" rifice 8541 2" M8511 x 7/16" rifice 8542 2" M8511 x 1/2" rifice 8543 2" M8511 x 17/32" rifice 8544 2" M8511 x 5/8" EL rifice 2½" 85 2½" M8511 x 3/8" rifice 8561 2½" M8511 x 7/16" rifice 8562 2½" M8511 x 1/2" rifice 8563 2½" M8511 x 17/32" rifice 8564 2½" M8511 x 5/8" EL rifice 8565 2½" M8511 x 3/4" EF rifice 3" 8570 3" M8511 x 3/8" rifice 8571 3" M8511 x 7/16" rifice 8572 3" M8511 x 1/2" rifice 8573 3" M8511 x 17/32" rifice 8574 3" M8511 x 5/8" EL rifice 85 3" M8511 x 3/4" EF rifice 4" 85 4" M8511 x 3/8" rifice 8581 4" M8511 x 7/16" rifice 8582 4" M8511 x 1/2" rifice 8583 4" M8511 x 17/32" rifice 8584 4" M8511 x 5/8" EL rifice 8585 4" M8511 x 3/4" EF rifice 8586 4" M8511 x K25 rifice 6" 8590 6" M8511 x 3/8" rifice 8591 6" M8511 x 7/16" rifice 8592 6" M8511 x 1/2" rifice 8593 6" M8511 x 17/32" rifice 8594 6" M8511 x 5/8" EL rifice 8595 6" M8511 x 3/4" EF rifice 8596 6" M8511 x K25 rifice ote: It is important to note that the pressure rating of the relief valve indicates an operating range of pressure for both opening and closing of the valve. tandard relief valves are required to E in a range of pressure between 90% and 105% of their rating. he valves are required to CLE at a pressure above % of that rating. he relief valve should be installed where it is easily accessible for maintenance. Care should be taken that the relief valve CA be isolated from the system when the system is operational. A relief valve should EVE have a shutoff valve or a plug downstream of its outlet. 2 Ea ndai is a registered trademark of AGF Manufacturing Inc.
i s e rack Model 8511 with ressure educing Valve izes: 1½" 2" 2½" 3" 4" 6" Model 8562-F-ZW-IL- with Zurn Wilkins V (ther V's Available) o reduce the inlet's water pressure, add an optional in-line or angled ressure educing Valve with pressure gauge and shutoff valve to the Model 8511 manifold. ressure educing Valves ressure educing Valves (V) regulate water pressure entering the fire protection system from the main water supply. Field Adjustable V (1½" & 2½") Field Adjustable ressure educing Valves regulate incoming water pressure and can be adjusted in the field. IZE AGF Item ID Description 1½" 2½" Zurn Wilkins 8530 1½" M8511 x 3/8" rifice FA-ZW-AB 8531 1½" M8511 x 7/16" rifice FA-ZW-AB 8532 1½" M8511 x 1/2" rifice FA-ZW-AB 8533 1½" M8511 x 17/32" rifice FA-ZW-AB 8534 1½" M8511 x 5/8" EL rifice FA-ZW-AB Elkhart Brass Inline Body Angled Body Inline Body Angled Body 85 2½" M8511 x 3/8" rifice FA-ZW-IL FA-ZW-AB FA-EB-IL FA-EB-AB 8561 2½" M8511 x 7/16" rifice FA-ZW-IL FA-ZW-AB FA-EB-IL FA-EB-AB 8562 2½" M8511 x 1/2" rifice FA-ZW-IL FA-ZW-AB FA-EB-IL FA-EB-AB 8563 2½" M8511 x 17/32" rifice FA-ZW-IL FA-ZW-AB FA-EB-IL FA-EB-AB 8564 2½" M8511 x 5/8" EL rifice FA-ZW-IL FA-ZW-AB FA-EB-IL FA-EB-AB 8565 2½" M8511 x 3/4" EF rifice FA-ZW-IL FA-ZW-AB FA-EB-IL FA-EB-AB How to generate an Item ID. Choose Manifold: 8530- Choose V: FA-ZW-AB. Example Item ID: 8530-FA-ZW-AB AGF Manufacturing Inc. hone: 610-2-4900 Fax: 610-2-4906 www.agfmanufacturing.com 3
i s e rack Factory et V (1½" & 2½") Factory et ressure educing Valves regulate incoming water pressure and come pre-configured from the factory. E: When choosing a Factory et ressure educing Valve, you must choose a Bonnet that corresponds with your application's specifications (refer to corresponding charts). IZE AGF Item ID Description 1½" 2½" Zurn Wilkins How to generate an Item ID. Choose Manifold: 8530- Choose V: F-ZW-AB- Choose Bonnet:. Example Item ID: 8530-F-ZW-AB- Bonnet Wilson & Cousins Inline Body Angled Body Inline Body Angled Body 8530 1½" M8511 x 3/8" rifice F-ZW-AB- F-WC-AB- 8531 1½" M8511 x 7/16" rifice F-ZW-AB- F-WC-AB- 8532 1½" M8511 x 1/2" rifice F-ZW-AB- F-WC-AB- 8533 1½" M8511 x 17/32" rifice F-ZW-AB- F-WC-AB- 8534 1½" M8511 x 5/8" EL rifice F-ZW-AB- F-WC-AB- 85 2½" M8511 x 3/8" rifice F-ZW-IL- F-ZW-AB- F-WC-IL- F-WC-AB- 8561 2½" M8511 x 7/16" rifice F-ZW-IL- F-ZW-AB- F-WC-IL- F-WC-AB- 8562 2½" M8511 x 1/2" rifice F-ZW-IL- F-ZW-AB- F-WC-IL- F-WC-AB- 8563 2½" M8511 x 17/32" rifice F-ZW-IL- F-ZW-AB- F-WC-IL- F-WC-AB- 8564 2½" M8511 x 5/8" EL rifice F-ZW-IL- F-ZW-AB- F-WC-IL- F-WC-AB- 8565 2½" M8511 x 3/4" EF rifice F-ZW-IL- F-ZW-AB- F-WC-IL- F-WC-AB- Choosing the proper Bonnet When choosing the Bonnet for the ressure educing Valve refer to the charts and the following procedure: 1. Determine the demand in gallons per minute required downstream of the valve. 2. o determine the static outlet pressure, locate the static chart. Determine the valve inlet static pressure shown on the vertical axis and draw a horizontal line from that pressure to the appropriate curve determined above, then draw a vertical line down to the horizontal axis and read the static outlet pressure. 3. Determine the standpipe residual or "flow pressure" at the valve inlet. 4. Locate the appropriate flow chart based on GM required and body style. 5. Locate the inlet residual pressure on the vertical axis of the chart and draw a horizontal line from this pressure across the chart. 6. Locate the desired valve outlet residual pressure on the horizontal axis of the chart and draw a vertical line from this pressure. 7. he curve nearest the intersection of the two lines drawn is the appropriate type for the valve. 4 Ea ndai is a registered trademark of AGF Manufacturing Inc.
Zurn Wilkins Wilson & Cousins Angled Body Angled Body Angle Body (ALL) - GM 1.5 Angle Body - GM 1.5 Angle Body - GM ype 4A & 4B ype 1 ype 1 1 utlet esidual (I) Angle Body (ALL) 301- GM 1 Inlet esidual (I) 1 utlet esidual (I) Inlet esidual (I) 1 1- GM 301- GM ype 2 ype 1 ype 0 ype 7 ype 6 ype 6 ype 5 ype 4 ype 3 ype 2 ype 1 ype 0 ype 4 ype 3 ype 2 ype 1 ype 0 1 ype 7 ype 7 ype 6 ype 6 1 utlet esidual (I) 1 utlet esidual (I) ype 0 1 utlet esidual (I) 1 utlet esidual (I) 2.5 Inline Body -0 GM ype 7 ype 4 ype 2 ype 1 ype 0 1 1 ype 7 ype 6 ype 3 2.5 Inline Body - GM ype 2 ype 1 utlet esidual (I) ype 3 e p y ype 5 Inlet esidual (I) Inlet esidual (I) 1-0 GM ype 5 ype 4 Inlet esidual (I) ype 2 ype 1 ype 0 ype 4 ype 3 1 2.5 Inline Body - GM Inlet esidual (I) utlet esidual (I) 2.5 Inline Body - GM Inlet esidual (I) Inlet esidual (I) Inlet esidual (I) 1 ype 5 2.5 Angle Body -0 GM utlet esidual (I) 2.5 Angle Body - GM Inline Body 1 utlet esidual (I) utlet esidual (I) ype 3 utlet esidual (I) ype 4 1 utlet esidual (I) ype 6 ype 7 ype 5 ype 0 Inlet esidual (I) ype 2 ype 1 ype 7 1 ype 5 ype 4 101- GM ype 6 ype 3 1 Inline Body 2.5 Angle Body - GM utlet esidual (I) - GM utlet esidual (I) ype 5 1 ype 7 2.5 Angle Body - GM utlet esidual (I) Angle Body (ALL) 1-0 GM utlet esidual (I) Inlet esidual (I) Inlet esidual (I) Inlet esidual (I) Inlet esidual (I) ype 2 Inlet esidual (I) ype 4A ype 3 ype 2 ype 5 ype 3 Inlet esidual (I) Inlet esidual (I) ype 5 Inlet esidual (I) Inlet esidual (I) Angle Body (ALL) 1- GM 5 ype 6 ype 4 ype 3 ype 2 ype 1 ype 0 utlet esidual (I) 1 utlet esidual (I) AGF Manufacturing Inc. hone: 610-2-4900 Fax: 610-2-4906 www.agfmanufacturing.com 5
i s e rack ilot perated V (2", 2½", 3", 4" & 6") ilot perated ressure educing Valves regulate incoming water pressure. IZE AGF Item ID Description 2" 2½" 3" 4" 6" 8530 1½" M8511 x 3/8" rifice 8531 1½" M8511 x 7/16" rifice 8532 1½" M8511 x 1/2" rifice 8533 1½" M8511 x 17/32" rifice 8534 1½" M8511 x 5/8" EL rifice Zurn Wilkins Inline Body Call for Availability 85 2½" M8511 x 3/8" rifice -ZW-IL 8561 2½" M8511 x 7/16" rifice -ZW-IL 8562 2½" M8511 x 1/2" rifice -ZW-IL 8563 2½" M8511 x 17/32" rifice -ZW-IL 8564 2½" M8511 x 5/8" EL rifice -ZW-IL 8565 2½" M8511 x 3/4" EF rifice -ZW-IL 8570 3" M8511 x 3/8" rifice -ZW-IL 8571 3" M8511 x 7/16" rifice -ZW-IL 8572 3" M8511 x 1/2" rifice -ZW-IL 8573 3" M8511 x 17/32" rifice -ZW-IL 8574 3" M8511 x 5/8" EL rifice -ZW-IL 85 3" M8511 x 3/4" EF rifice -ZW-IL 85 4" M8511 x 3/8" rifice -ZW-IL 8581 4" M8511 x 7/16" rifice -ZW-IL 8582 4" M8511 x 1/2" rifice -ZW-IL 8583 4" M8511 x 17/32" rifice -ZW-IL 8584 4" M8511 x 5/8" EL rifice -ZW-IL 8585 4" M8511 x 3/4" EF rifice -ZW-IL 8586 4" M8511 x K25 rifice -ZW-IL 8590 6" M8511 x 3/8" rifice 8591 6" M8511 x 7/16" rifice 8592 6" M8511 x 1/2" rifice 8593 6" M8511 x 17/32" rifice 8594 6" M8511 x 5/8" EL rifice 8595 6" M8511 x 3/4" EF rifice 8596 6" M8511 x K25 rifice How to generate an Item ID. Choose Manifold: 85- Choose V: -ZW-IL. Example Item ID: 85--ZW-IL Call for Availability 6 Ea ndai is a registered trademark of AGF Manufacturing Inc.
www.riserpack.com
AGF Manufacturing Inc. uaker Lane Malvern, A 19355 hone: 610-2-4900 Fax: 610-2-4906 www.agfmanufacturing.com