개요 (Overview) 절연체 (Insulator)

개요 (Overview) VG924 규격과일치하는, YH-Bayonet 시리즈커넥터입니다. 이커넥터는 MIL-TL-01의나사식결합방식을 bayonet 방식으로개량하여결합 / 분리가쉽도록제작된커넥터입니다. 진동에의한유체침투로부터보호를목적으로하는곳에사용하는데적합하도록설계된제품이며, 결합 / 분리가쉽도록설계되었습니다. 항공기및군용차량, 전차, 배등의장비및정보통신장비등에사용되고있습니다. The YH-Bayonet Connector Series was designed in accordance with the VG924 specification. The connectors bayonet coupling method, improved from screw-type MIL-TL-01, provide easy mating/unmating. The product was designed to be used for protection from penetration of fluids by vibration and provides easy mating/unmating. It is used as parts and communication devices in aircraft and military vehicles, electric vehicles, and ships. Introduction Overview Ordering Information 4 Technical data Mounting Holes 8 Information about insulator contact 10 Contact rrangement 11 lternate Insert Position 1 절연체 (Insulator) NBR(Nitrile Butadiene Rubber) CR(Chloprene Rubber) YHB Series VG924 Style Box Mounting Receptacle 14 Thru-Bulkhead Receptacle 1 Straight Plug, Shielded 1 Wall Mounting Receptacle 17 Receptacle For Front Panel Mounting 18 Straight Plug 24 Jam Nut Receptacle 0 Plug 90 Shielded 1 내유성이우수함 ( 경유, 휘발유 ) 내후성, 내약품성, 내유성, 난연성, 오존성, 내열성, 노화성이우수함 장점 내마모성, 내수성, 내노화성이우수함 가스투과성이적음 접착력이우수함 굴곡파열성, 내마모성이우수함 내열성 +10 까지사용가능함 가격 낮음 높음 연합정밀에서는 NBR 보다가격및성능면에서우수한 CR 고무를사용한절연체제품만을생산하여사용하고있습니다. VG/YH-B, YHB Contact Pin Contacts (WG, Metric) Socket Contacts (WG, Metric) 4 Pin Contacts NBR(Nitrile Butadiene Rubber) xcellence of Fluid-resistance (iesel, Gasoline) CR(Chloprene Rubber) xcellence of Weather-resistance, Chemical gent, Fluid-resistance, Flameability, Heat-resistance, Heat ging test and Ozone-resistance VG924 Style ccessories Metal ust Caps With Chain ummy Receptacle Cable Clamps 7 Rubber bushing 7 ngular O-ring for sealing 8 Sealing plug 8 Merit xcellence of brasion-resistance, Water-Resistance and Heat ging test Low in Permeability of gas High level of adhension xcellence of Flexibility and brasionresistance Heat-resistance, it is able to stand up to +10 Price Lower Higher Yeonhab Precision has produced and use and Insulator of only use a CR rubber, which was excellect price and performance compare with NBR. YONHB PRCISION CO., LT.

YH series VG924 Style Connector ISO 9001/ ISO14001 YH series VG924 Style Connector ISO 9001/ ISO14001 주문정보 (Ordering Information) VG Nomenclature Series Shell Type Shell Size Contact rrangement Contact Class Contact Type lternate Insert Position Series VG924 VG924 2- S 1 N Shell Type J1, J2, N1, N2, S1, U1, U2 - Wall Mounting Receptacle F - Cable Connection Plug, B1, B2 - Box Mounting Receptacle C1, C2 - Bulkhead Receptacle, G, H, L, M, R1 - Straight Plug, 1, K - Plug 90 Shell Size 10SL, 14S, 1S, 1, 18, 20, 22, 24, 28, 2, Contact rrangement Refer to VG924 specification Contact Class P - Pin Contact S - Socket Contact Contact Type YONHB Nomenclature YH10 2- S X - B - *** Shell Type Class Shell Size Contact rrangement Contact Class lternate Insert Position Connector Coupling Method (Bayonet Coupling) Measurement Information Shell type YH100 - Wall Mounting Receptacle YH101 - Cable Connection Plug YH102 - Box Mounting Receptacle YH10 - Plug, Straight YTBF - Bulkhead Receptacle nvironmental rating - appropriately uses clamp and bushings in flexible rubber insulator and end bell. Shell size 10SL, 14S, 1S, 1, 18, 20, 22, 24, 28, 2, Contact rrangement Refer to the VG924 specification and MIL-ST-11. Contact Class P - Pin Contact S - Socket Contact lternate Insert Position Refer to the VG924 specification and MIL-ST-11. Letter 1 indicates the electrical wire size. lternate Insert Position Refer to VG924 specification. VG ccessories VG924 BO - ummy Receptacle VG924 - Gaskets, Front Mount VG924 H - Gaskets, Rear Mount VG924 KR - Protecting Caps VG924 KB - Protecting Caps VG924 KK - Cable Caps VG924 KT - Bushing Connector Coupling Method Bayonet Coupling Measurement Information 01-Metric clamping contact 02-Uses heat shrink boots in adaptor. WG clamping contact 0-Uses heat shrink boots in adaptor. Metric clamping contact 04-Rear Mount. Screw-type hole flange. Metric clamping contact 0-Rear Mount. Screw-type hole flange. Soldering type contact (YH100, YH102, YTBF applied) 0-Heat shrink boot adaptor. Screw-type hole flange. Soldering type contact 08-90 end bell. Screw-type hole flange (YH100 applied) 09-90 end bell. Through-hole flange (YH100 applied) 1 - shield version. Soldering type contact 14 - shied version. Metric clamping contact. 1 - shield version. WG clamping contact. 2 - end bell structure for shield system cable. MTV14-00. 109-F80. Rear mount. Screw-type flange(yh102 applied) 111-Rear amount. screw-type flange(yh102 applied). Soldering type contact. F80-WG clamping contact. 22 - Zinc cobalt plating(black) 주문정보 (Ordering Information) YONHB Nomenclature Type Material Type Shell Style nvironmental Rating Shell Size Contact rrangement Contact Class lternate Insert Position Contact Type (no letter indicates soldering-type contact) Product Type YHB-General connector YHBG-MI Ground Finger type connector Material Type Blank - Standard(CR) insulator V - Silicon(SR) insulator Shell Style 01 - In-Line Receptacle 02/00 - Front Panel Mount Receptacle 0/00 - Rear Panel Mount Receptacle 0 - Straight Plug 07 - Single Hole Mount Jamnut Receptacle, No Rear Thread 070 - Single Hole Mount Jamnut Receptacle, With Rear Thread 08-90 Plug Shell Size 10SL, 14S, 1S, 1, 18, 20, 22, 24, 28, 2, Contact rrangement Refer to the VG924 specification and MIL-ST-11. lternate Insert Position Refer to the VG924 specification and MIL-ST-11. Contact Type F80-WG clamping contact CR-Metric clamping contact Blank - soldering contact YHB V 0 G 20-29 P X - F80 nvironmental Rating It is based on the accessories and backshell that seal according to each rating. G - heat shrink boots are used for end bell accessories. includes grommet and bushing. (applicable to 01,00,00, 0) G - excludes grommet and bushing from G rating R - other accessories are used for end bell accessories. includes grommet and bushing. (08-90 end bell) SB - MI blade and heat shrink boots used. includes grommet and bushing. SBT - MI blade, heat shrink ring and heat shrink boots used. includes grommet and bushing. F - includes cable clamp and rubber bushing. F- excludes grommet and bushing from F rating FP - the panel mounting hole is a through-hole type RG - MI coil ground finger tyle (applicable to 07, 070) Contact class P - Pin Contact S - Socket Contact 4 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT.

YH series VG924 Style Connector ISO 9001/ ISO14001 기술적정보 (Technical ata) 기술적정보 (Technical ata) lectrical Information Contact Resistance (Milivolt testing) Mechanical characteristics Contact Separating Force lectrical Information (+20 ) mbient temperature Contact Rating Current Voltage testing per service rating Material Temperature range Separating Force(Min) Metric WG Testing Voltage (Vrms) Standard(CR) insulator - ~ +12 Metric WG N Gauge 10-8 1/1S 1/1S 22 2 12 41 0/100 8 74 10 4 1 00 0 24 Instruments 100 100 B 4000 200 000 Required to meet the testing no..1 in Part 2 of VG919 and Part 1 of VG9210 Silicon(SR) insulator -0 ~ +200 Vibration testing 200m s2에서 10~2000Hz Coupling testing 00 times 10-0.0 G 0.99 1S/1 1S/1 1.00 G 1. 2 12 1.0 G 2. 0/100 8.00 G.8 10 4 4.00 G.9 00 0 8.0 G 9.04 Contact Resistance ir and Creepage Paths() () Voltage Rating Instr. ir and Creepage Paths 0.70 1.10 2.80 4.80 Separating force needs to be measured accurately according to the testing no..7 in Part 2 of VG919. testing gauge is used. VG919 Part 2 의시험번호.12 와 VG9210 Part 2 의시험조건 B 와일치할것. Gauge (VG924, Part 1) Coupling Torque 표준 (CR) 절연체 > 1000MΩ 실리콘 (SR) 절연체 > 000MΩ Required to meet the testing no..12 in Part 2 of VG919 and testing condition B in Part 2 of VG9210. Standard(CR) insulator > 1000MΩ Silicon(SR) insulator > 000MΩ Shell Size pproved Coupling Torque Locking and unlocking Nm unlocking Nm Min 10SL 1.70 0.1 Current Rating (according to ambient temperature) Contact Resistance (Milivolt testing) Gauge +0.01 L -1.00 14S.0 0. 1S/1.0 0.4 18 8.00 0.8 20 G 0.99 0.99 7.00 G 1. 1. 9.00 20 9.00 0.70 22 11.00 0.80 G 2. 2. 12.00 24 14.00 0.80 G.8.8 1.00 28 17.00 0.92 200 G.9.9 1.00 2 19.00 1.0 G 9.04 9.04 1.00 2.00 1.0 00, 0 Coupling torque is tested according to the testing no..8.2 in Part 2 of VG919. 10 Contact Resistance is tested according toe the testing no..10.1 in Part 2 of VG924 and Part 7 of VG9210. It represents the actually measured point. 100 10, 4 Contact Rating Current Metric WG mω Contact Retention Force Material and protection coating () Operating Current 0 0 0/100, 8 2, 12 1/1S, 1/1S 10-12 1S/1 1/1S 2 12 0/100 8 1 10 4 0. 00 0 0.2 Testing power Metric WG N 10-0 1S/1 1S/1 2 12 Body Standard protection coating Substitute protection coating Insulator and grommet aluminum alloy cadmium plating(viridescent color) on top Zinc cobalt plating(black Chloroprene Rubber(standard) Slicone Rubber(for high temperature) 20 40 0 80 100 120 0/100 8 80 Contact Copper alloy mbient temperature ( ) 10 4 90 Protection coating Hard silver plating 00 0 9 Contact Retention Testing must meet the testing no..4 in Part 2 of VG919. Testing power direction = locking direction. YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 7

Mounting Holes Mounting Holes 장비에사각형코넥터장착을위하여패널에구멍을뚫는다 VG924 Style, B1, B2, C1, C2, J1, J2, N1, N2 적용. YH-B 시리즈 YH100-B, YH102-B, YTBF-B 적용. Holes are made in the panel to mount the quadrangle connector on the equipment. pplicable to VG924 Style, B1, B2, C1, C2, J1, J2, N1, N2. pplicable to YH-B Series including YH100-B, YH102-B, YTBF-B. YHB07, 070 pplication Shell Size 1 2 2 H12 Screws To Be Used Style YH102-B Style B1,B2,C1,C2 J1,J2,N1,N2 YH100-B YTBF-B/-0 Style,B2,C2,J2,N2 YH-B Mod.-0 Style B1,C1,J1,N1 YH100-B YH102-B Style,B2,C2,J2,N2 YH-B Mod.-0 Style B1,C1,J1,N1 YH100-B YH102-B YTBF-B 10SL 18.20 1.4 18..4 4. IN 8-M... IN 84-M4... 14S 2.00 19.7 24.9.4 4. IN 8-M... IN 84-M4... 1S 24.0 22.9 27.7.4 4. IN 8-M... IN 84-M4... 1 24.0 22.9 27.7.4 4. IN 8-M... IN 84-M4... 18 27.00 2.1 1.1.4 4. IN 8-M... IN 84-M4... 20 29.40 29. 4..4 4. IN 8-M... IN 84-M4... 22 1.80 2.7 7.8.4 4. IN 8-M... IN 84-M4... 24 4.90.0 41..9 4. IN 8-M... IN 84-M4... 28 9.70 42.0 47.1.9. IN 8-M... IN 84-M... 2 44.0 48..8 4.. IN 8-M4... IN 84-M... 49.20 4. 0.0 4.. IN 8-M4... IN 84-M... Size 1 +0.2-0. 10SL 22.40 21.00 14S 28.7 27.40 1S/1 1.9 0.9 18.10.7 20 8.0.8 22 41.4 40.0 24 44. 4. 28 1.00 49. 2 7..9.70 2. Harnessing VG924 코넥터는하네스에사용되는개개의전선을위해설계되었습니다. 완전밀봉을위해서 MIL-W-08, LN921(WG 전선 ) 그리고 TL14-009와 TL14-011(metric 전선 ) 과일치하는전선을사용해야만보증할수있습니다. 모든다른전선들은표에제공되어진자료로전선과절연체외경들에따라야합니다. Clamping and soldering type contact Insulator external diameter WG Metric WG VG924 connector was designed for individual wires used for harnessing. Complete sealing is guaranteed only when the wires that match MIL-W-08, LN921(WG wire), TL14-009, and TL14-011(metric wire) are used. ll other wires need to follow the wires and insulator external diameter provided in the table. - 10-0.7-1.00-2.20-2.0 1S/1S 1/1 1 0.7-1.0 2.20-2.80 2.20-2.80 12 2 12 2.0.10-.0.10-.0-0 -.00-4.40-4.90 8 100 8 10.00.0-.0.90-.0 4 10 4 1.00 8.0-9.40 7.10-7.70 0 00 0 0.00 11.0-1.00 12.10-12.80 Metric mm2 WG Metric mm YHB02 pplication Size 1 2 Screw hole application YHB00, 0, 00 pplication Size 1 2 Screw hole application 10SL 17.0.4 4. 18.2 10SL 19.1.4 4. 18.2 14S 20.0.4 4. 2.0 14S 2..4 4. 2.0 1S/1 2.0.4 4. 24. 1S/1 28..4 4. 24. 18 2..4 4. 27.0 18 1.7.4 4. 27.0 20 0.0.4 4. 29.4 20.0.4 4. 29.4 22.0.4 4. 1.8 22 8..4 4. 1.8 24.0.9. 4.9 24 41.8.9. 4.9 28 42.0.9. 9.7 28 47..9. 9.7 2 48. 4.. 44. 2 4. 4.. 44..0 4.. 49.2 0. 4.. 49.2 Wire Stripping 기계적탈피또는고온탈피중익숙한방법을택하여탈피한다. 도체또는절연체의손상을방지한다. 납땜용접점은납땜작업이용이하도록 탈피된도체에주석을입힌다. ither mechanical stripping or high temperature stripping needs to be used. amage to the conductor or insulator is to be prevented. Tin is coated on the stripped conductor for easy soldering with soldering type contact. Stripping length WG Metric mm - 10 4.0 1S/1S 1/1.2 12 2.2 8 0/100 11.8 4 10 11.8 0 00 1.7 MI Ground Finger Type Connector Yeonhab Precision VG924 Style M, L, K Yeonhab Precision Style YH10-B-1-14-1, YHBG (0, 08) MI Ground Finger 8 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 9

Information about Insulator Contact rrangement VG924 Style접점배열도 (Contact rrangements) Contact rrangement VG. Contact rrangement Service Rating Total No. of Contact lternate Insert Position Metric/WG Metric 1S/1S 1/1 2/12 8 4 0 0 100 10 00 W X Y Z Shell Size 10 Shell Size 14 Shell Size 1 10SL- 10SL- 10SL-4 10SL-4 2 2 14S-1 14S- I 110 14S- 14S- I 14S-12 1S-1 1S-1 7 7 80 280 10SL- Shell Size 1 10SL-4 2 14S-1 Shell Size 18 14S- 14S- 14S-12 1S-1 7 1-10 1-10 1-10 90 180 270 1-11 2 2 110 20 2 1-12 1-12 1 1 1 18-1 18-1, I 10 10 70 14 290 18-1 2 80 110 20 280 18-8 8 7 1 70 290 18-10 4 4 120 240 18-11 18-11 170 2 18-12 80 280 1-11 2 1-12 18-1 #4-2, -1 1 10 18- (B,C,F,G) (all others) 18-8 8-1, -7 18-10 4 18-11 18-19 10 10 120 240 18-21 Shell Size 18 Shell Size 20 20-2 20-2 1 1 1 20-70 14 21 290 209 209, I 9 9 110 20 20-11 I 1 1 20-19 90 180 270 20-22 80 110 20 280 20-2 2 2 110 20 2 20-29 17 17 80 280 2048 2048 I 19 19 80 280 22-2 22-2 70 14 21 290 18-12 18-19 10 18-21 20-2 I #0 20-209 9 (J) (all others) 22-12 22-12 2 2 80 110 20 280 22-14 22-14 19 19 80 280 Shell Size 20 22-21 2 1 80 110 20 280 22-22 22-22 4 4 4 110 20 22-2, 8 8 20 24-9 2 2 110 20 2 24-10 24-10 7 7 7 80 280 24-11 24-11 9 110 20 2 24-12 24-12 2 80 110 20 280 24-20 11 9 2 80 110 20 280 24-22 4 4 4 110 20 24-28 I 24 24 80 110 20 280 24-7 19 19 80 2428 I 28 28 14 2 20-11 1 Shell Size 22 20-19 #8 20-22 #8-, - 20-2 2 #8 20-29 17 2048 19 28-2 1 2 110 20 2 28-70 14 21 290 28-9 12 80 110 20 280 28-10, 7 2 2 80 110 20 280 28-11 28-11 22 18 4 80 110 20 280 28-1 80 110 20 280 28-21 28-21 7 7 80 110 20 280 28-22 70 14 21 290 281, I 9 4 22-2 #8 22-12 #8-2, - 22-14 19 22-21 #0-1, -2 22-22 4 #8 2-1 2-1, 2 2 80 110 20 280 2-2 2 110 20 2 Shell Size 22 Shell Size 24 2-7 2-7, I 28 7 80 12 2 280 2-1 8 2 110 20 2 2-17 4 4 4 110 20 2-90 180 270 2-22 22 20 2 1 20 29-70 14 21 290 - - 4 4 4 120 240 - - 4 2 110 20 2 The above arrangement has been developed by the Company for VG924 specification and MIL-ST-11 arrangement. * For other necessary arrangement than the above arrangement, refer to the MIL-ST-11 arrangement and contact the Company for development of other arrangements. 22-2 8 (H) (all others) 24-9 2 #4 24-10 24-11 7 9 #8 #8-, - 24-12 #4-2, - 1. viewed from the front of Pin insert (+ insulator) 2. Contact the Company for other information not contained in the above figure. 10 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 11

VG924 Style접점배열도 (Contact rrangements) Shell Size 24 VG924 Style (Contact rrangements) Shell Size 24-20 11-2, -9 24-22 24-28 4 24 #8 24-7 19 2428 28 Shell Size 28 - #0-,- - - 4 #0 #0-2,#4-4 1. viewed from the front of Pin insert (+ insulator) 2. Contact the Company for other information not contained in the above figure. 28- #4-2, -1, -2 28- #4 28-9 12 -, - 28-10 7 #4-2, #8-2, - (,B,C,,,F) (G) 28-11 22-4, -18 절연체회전위치 (lternate Insert Positions) Shell Size 28 키회전문자 W, X, Y, Z에따라회전하며, 문자표시가없거나문자가 N인경우는중심선 (Centerline) 에절연체키홈이위치한다. 코넥터의절연체배열및회전위치는 VG924 및 MIL-ST-11에따른다. 위배열외개발가능배열은당사에문의바랍니다. It rotates following the key rotation letters W, X, Y, and Z. If there is no letter or the letter is N, insulator key hole is located at the center line. Insulator arrangement and rotation position of the connector follows VG924 specification and MIL-ST-11. Contact the Company for other possible arrangement that can be devleoped. 28-1 28-21 7 28-22 #4-, - 281 9 #4-4, - () (all others) Shell Size 2 2-1 #0-2, - () (all others) 2-2 #0 2-7 -7, -28 (,B,U,I) (all others) 2-1 8 #0-2, - Shell Size 2 2-17 4 #4 2-2-22 22 #4 #0-2, -20 1. viewed from the front of Pin insert (+ insulator) 2. Contact the Company for other information not contained in the above figure. 12 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 1

Box Mounting Receptacle VG924 Style Box Mounting Receptacle VG924 Style B2 YH102-B 와옵션에따른개량정보참조정사각형플랜지형상이며패널의앞쪽에장착함. ( 패널이플랜지후면에붙음 ) YH102-B and options.square flange type and mounted in front of the panel (panel is positioned at the back of flange). Panel mounting hole is a hole type. YH102-B 와옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함.( 패널이플랜지전면에붙음 ) YH102-B and options. Square flange type and mounted at the back of the panel (panel is positioned in front of flange). Panel mounting hole is a hole type. 1 2-0.1 ±0. L ±0. 1 2-0.1 ±0. 0 L ±0. YH10210SL-**-B-*** 1.2.2 18.20 18.2 24.7 14.2 2.8 2.4 YH10212S-**-B-*** 1.2.2 21.40 20. 24.7 14.2.2 28.0 YH10214S-**-B-*** 19.2.2 24.0 2.0 24.7 14.2.2 0.0 YH1021S-**-B-*** 22.4.2 27.40 24. 24.7 14.2.2 2. YH1021-**-B-*** 22.4.2 27.40 24..8 19.0.2 2. YH10218-**-B-*** 2..2 0.80 27.0.8 19.0 4.0.0 YH10220-**-B-*** 29.0.2 4.20 29.4.8 19.0 4.0 8.4 YH10222-**-B-*** 2.0.2 7.40 1.8.8 19.0 4.0 41.0 YH10224-**-B-***..7 40.90 4.9.8 20. 4.0 44. YH10228-**-B-*** 41.4.7 4.70 9.7.8 20. 4.0 0.8 YH1022-**-B-*** 47.8 4..40 44..8 22.2 4.0 7.0 YH102-**-B-*** 2. 4. 9.0 49.2.8 22.2 4.0. YH10210SL-**-B-*** 1.2.2 18.20 18.2 24.7 18.20 2.8 2.4 YH10212S-**-B-*** 1.2.2 21.40 20. 24.7 18.20.2 28.0 YH10214S-**-B-*** 19.2.2 24.0 2.0 24.7 18.20.2 0.0 YH1021S-**-B-*** 22.4.2 27.40 24. 24.7 18.20.2 2. YH1021-**-B-*** 22.4.2 27.40 24..8 21.0.2 2. YH10218-**-B-*** 2..2 0.80 27.0.8 2.0 4.0.0 YH10220-**-B-*** 29.0.2 4.20 29.4.8 2.0 4.0 8.4 YH10222-**-B-*** 2.0.2 7.40 1.8.8 2.0 4.0 41.0 YH10224-**-B-***..7 40.90 4.9.8 2.0 4.0 44. YH10228-**-B-*** 41.4.7 4.70 9.7.8 24.0 4.0 0.8 YH1022-**-B-*** 47.8 4..40 44..8 24.0 4.0 7.0 YH102-**-B-*** 2. 4. 9.0 49.2.8 24.0 4.0. Box Mounting Receptacle Thru-Bulkhead Receptacle VG924 Style B1 YH102-B 와옵션에따른개량정보참조. (-04, -109, -111) 정사각형플랜지형상이며패널의뒤쪽에장착함. ( 패널이플랜지전면붙음 ) 패널장착홀은나사임. YH102-B and options. (-04, -109, -111) Square flange type and mounted at the back of the panel (panel is positioned in front of flange). Panel mounting hole is a screw type. VG924 Style C1 YTBF-B 와옵션에따른개량정보참조. 플러그방식의 코넥터를중간에서연결시켜주는역할을하는양방향 정사각형플랜지형상의제품임. 패널장착홀은나사임. YTBF-B and options.it is a two-way square flange type product that connects plug-type connectors in the middle. Panel mounting hole is a screw type. O-Ring 1 2-0.1 ±0. 0 L ±0. 2-0.1 ±0.7 +0. L ±0. YH10210SL-**-B-*** 1.2 M4x0.7 18.20 18.2 24.7 18.20 2.8 2.4 YH10212S-**-B-*** 1.2 M4x0.7 21.40 20. 24.7 18.20.2 28.0 YH10214S-**-B-*** 19.2 M4x0.7 24.0 2.0 24.7 18.20.2 0.0 YH1021S-**-B-*** 22.4 M4x0.7 27.40 24. 24.7 18.20.2 2. YH1021-**-B-*** 22.4 M4x0.7 27.40 24..8 21.0.2 2. YH10218-**-B-*** 2. M4x0.7 0.80 27.0.8 2.0 4.0.0 YH10220-**-B-*** 29.0 M4x0.7 4.20 29.4.8 2.0 4.0 8.4 YH10222-**-B-*** 2.0 M4x0.7 7.40 1.8.8 2.0 4.0 41.0 YH10224-**-B-***. M4x0.7 40.90 4.9.8 2.0 4.0 44. YH10228-**-B-*** 41.4 Mx0.8 4.70 9.7.8 24.0 4.0 0.8 YH1022-**-B-*** 47.8 Mx0.8.40 44..8 24.0 4.0 7.0 YH102-**-B-*** 2. Mx0.8 9.0 49.2.8 24.0 4.0. YTBF-10SL-**-B-*** M4x0.7 18.20 18.2 7. 14.2 2.8 2.4 YTBF-12S-**-B-*** M4x0.7 21.40 20. 7. 14.2.2 28.0 YTBF-14S-**-B-*** M4x0.7 24.0 2.0 7. 14.2.2 0.0 YTBF-1S-**-B-*** M4x0.7 27.40 24. 7. 14.2.2 2. YTBF-1-**-B-*** M4x0.7 27.40 24. 1.4 19.0.2 2. YTBF-18-**-B-*** M4x0.7 0.80 27.0 1.4 19.0 4.0.0 YTBF-20-**-B-*** M4x0.7 4.20 29.4 1.4 19.0 4.0 8.0 YTBF-22-**-B-*** M4x0.7 7.40 1.8 1.4 19.0 4.0 41.0 YTBF-24-**-B-*** M4x0.7 40.90 4.9 1.4 20. 4.0 44. YTBF-28-**-B-*** Mx0.8 4.70 9.7 1.4 20. 4.0 0.8 YTBF-2-**-B-*** Mx0.8.40 44. 1.4 22.2 4.0 7.0 YTBF--**-B-*** Mx0.8 9.0 49.2 1.4 22.2 4.0. 14 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 1

Thru-Bulkhead Receptacle Wall Mounting Receptacle VG924 Style C2 YTBF-B 와옵션에따른개량정보참조. (-0) 플러그방식의코넥터를중간에서연결시켜주는 역할을하는양방향정사각형플랜지형상의제품임. YTBF-B and options. It is a two-way square flange type product that connects plug-type connectors in the middle. Panel mounting hole is a hole type. 2-0.1 YTBF-10SL-**-B-***.2 18.20 18.2 7. 14.2 2.8 2.4 YTBF-12S-**-B-***.2 21.40 20. 7. 14.2.2 28.0 YTBF-14S-**-B-***.2 24.0 2.0 7. 14.2.2 0.0 YTBF-1S-**-B-***.2 27.40 24. 7. 14.2.2 2. YTBF-1-**-B-***.2 27.40 24. 1.4 19.0.2 2. YTBF-18-**-B-***.2 0.80 27.0 1.4 19.0 4.0.0 YTBF-20-**-B-***.2 4.20 29.4 1.4 19.0 4.0 8.4 YTBF-22-**-B-***.2 7.40 1.8 1.4 19.0 4.0 41.0 YTBF-24-**-B-***.7 40.90 4.9 1.4 20. 4.0 44. YTBF-28-**-B-***.7 4.70 9.7 1.4 20. 4.0 0.8 YTBF-2-**-B-*** 4..40 44. 1.4 22.2 4.0 7.0 YTBF--**-B-*** 4. 9.0 49.2 1.4 22.2 4.0. ±0.7 O-Ring +0. L ±0. VG924 Style N1 YH100-B 와옵션에따른개량정보참조. (-1, -14, -1, -0-1, -0-04, 0-1) 정사각형플랜지타입코넥터로엔드벨악세사리에 MI 브레이드와부트를사용할수있으며, 절연체패킹 및부싱이포함되어전선방수가가능한구조임. 패널장착홀은나사임 YH10-B and options.(-1,-14,-1,-0-1,-0, -04,0-1) It is a square flange type connector that can be used with MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. Panel mounting hole is a screw-type. 1-0.1 2 ±0. 4 YH10010SL-**-B-*** 18.20 M4x0.7 18. 7.7 1. 18.2.0 18.20 2.8 2.4 YH10012S-**-B-*** 21.40 M4x0.7 20.0 9. 17.0 20. 8.0 18.20.2 28.0 YH10014S-**-B-*** 24.0 M4x0.7 22.0 10. 20.0 2.0 8.0 18.20.2 0.0 YH1001S-**-B-*** 27.40 M4x0.7 2.0 1. 2.0 24. 70.0 18.20.2 2. YH1001-**-B-*** 27.40 M4x0.7 2.0 1. 2.0 24. 70.0 21.0.2 2. YH10018-**-B-*** 0.80 M4x0.7 28.0 14. 24. 27.0 70.0 2.0 4.0.0 YH10020-**-B-*** 4.20 M4x0.7 2.0 18. 28. 29.4 70.0 2.0 4.0 8.4 YH10024-**-B-*** 40.90 M4x0.7 8.0 24. 4. 4.9 70.0 2.0 4.0 44. YH10028-**-B-*** 4.70 Mx0.8 41.0 27.0 7. 9.7 70.0 24.0 4.0 0.8 YH1002-**-B-***.40 Mx0.8 48.0. 44.0 44. 7.0 24.0 4.0 7.0 YH100-**-B-*** 9.0 Mx0.8.0 8. 1.0 49.2 8.0 24.0 4.0. 0 L ±0. Straight Plug, Shielded VG924 Style M YH10-B 와옵션에따른개량정보참조. (-1, -14, -1) MI 핑거타입플러그코넥터로서엔드벨악세사리에 MI 브레이드와부트를사용할수있으며, 절연체패킹 및부싱이포함되어전선방수가가능한구조임. YH10-B and options.(-1,-14,-1) It is an MI finger type plug connector that can be used with MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. Wall Mounting Receptacle VG924 Style N2 YH100-B 와옵션에따른개량정보참조. 정사각형플랜지타입코넥터로엔드벨악세사리에 MI브레이드와부트를사용할수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. YH10-B and options. It is a square flange type connector that can be used with MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. Panel mounting hole is a hole-type. 1 2 ±0. 4 +0.1 L ±0. 1-0.1 2 ±0. 4 0 L ±0. YH1010SL-**-B-*** 22.8 7.7 18. 1..0 17.0 7.0 YH1012S-**-B-*** 2.0 9. 20.0 17.0.0 17.0 7.0 YH1014S-**-B-*** 29.2 10. 22.0 20.0.0 17.0 7.0 YH101S-**-B-*** 2.0 1. 2.0 2.0 0.0 18.0 8.0 YH101-**-B-*** 2.0 1. 2.0 2.0 70.0 18.0 8.0 YH1018-**-B-***. 14. 28.0 24. 70.0 18.0 8.0 YH1020-**-B-*** 9.9 18. 2.0 28. 70.0 18.0 10.0 YH1024-**-B-*** 4. 24. 8.0 4. 70.0 18.0 10.0 YH1028-**-B-***.4 27.0 41.0 7. 70.0 18.0 10.0 YH102-**-B-*** 0.1. 48.0 44.0 70.0 18.0 10.0 YH10-**-B-***. 8..0 1.0 80.0 18.0 10.0 YH10010SL-**-B-*** 18.20.2 18. 7.7 1. 18.2.0 18.20 2.8 2.4 YH10012S-**-B-*** 21.40.2 20.0 9. 17.0 20. 8.0 18.20.2 28.0 YH10014S-**-B-*** 24.0.2 22.0 10. 20.0 2.0 8.0 18.20.2 0.0 YH1001S-**-B-*** 27.40.2 2.0 1. 2.0 24. 70.0 18.20.2 2. YH1001-**-B-*** 27.40.2 2.0 1. 2.0 24. 70.0 21.0.2 2. YH10018-**-B-*** 0.80.2 28.0 14. 24. 27.0 70.0 2.0 4.0.0 YH10020-**-B-*** 4.20.2 2.0 18. 28. 29.4 70.0 2.0 4.0 8.4 YH10024-**-B-*** 40.90.7 8.0 24. 4. 4.9 70.0 2.0 4.0 44. YH10028-**-B-*** 4.70.7 41.0 27.0 7. 9.7 70.0 24.0 4.0 0.8 YH1002-**-B-***.40 4. 48.0. 44.0 44. 7.0 24.0 4.0 7.0 YH100-**-B-*** 9.0 4..0 8. 1.0 49.2 8.0 24.0 4.0. 1 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 17

YHB00F 와옵션에따른개량정보참조. / YHB00F - 절연체패킹및부싱제외. 엔드벨에케이블클램프와고무부싱이포함된 제품이며, 절연체패킹및부싱이포함되어 전선방수가가능한구조임. 정사각형플랜지형상이며, 패널의앞쪽에 장착함. ( 패널이플랜지후면에붙음 ) YHBOOF and options. YHBOOF - excludes insulator packing and bushing. Its end bell includes cable clamp and rubber bushing. Includes insulator packing and bushing and its structure makes wire water resistance possible. square flange type and mounted in front of the panel. (Panel is positioned at the back of flange) Panel mounting hole is a hole-type. YHB00R 과옵션에따른개량정보참조. 엔드벨에악세사리를함께사용할 수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. 정사각형플랜지형상이며패널의앞쪽에장착함. ( 패널이플랜지후면에붙음 ) Refer to the measurement information following YHBOOR and options. ccessories can be used together at end bell and includes insulator packing and bushing and its structure makes wire water resistance possible. square flange type and mounted in front of the panel. (Panel is position at the back of flange) Panel mounting hole is a hole-type. 1-0.1 2 L ±0. L 1-0.1 2 L ±0. L V Thread. (Class : 2) YHB00**-10SL-**-*** 18.20.2.8 18.2 4.0 14.2 2.8 2.4 22.7 YHB00**-14S-**-*** 24.0.2 7.92 2.0 9.0 14.2.2 0.0 27. YHB00**-1S-**-*** 27.40.2 11.09 24. 71.0 14.2.2 2. 0.0 YHB00**-1-**-*** 27.40.2 11.09 24. 82.0 19.0.2 2. 0.0 YHB00**-18-**-*** 0.80.2 14.27 27.0 82.0 19.0 4.0.0 2.2 YHB00**-20-**-*** 4.20.2 1.87 29.4 82.0 19.0 4.0 8.0 7. YHB00**-22-**-*** 7.40.2 1.87 1.8 8.0 19.0 4.0 41.0 7. YHB00**-24-**-*** 40.90.7 19.0 4.9 87.0 20. 4.0 44. 4. YHB00**-28-**-*** 4.70.7 19.0 9.7 9.0 20. 4.0 0.8 4. YHB00**-2-**-***.40 4. 2.79 44. 99.0 22.2 4.0 7.0 1.7 YHB00**--**-*** 9.0 4. 1.7 49.2 100.0 22.2 4.0. 8.0 YHB00R-10SL-**-*** 18.20.2 10.4 18.2 4.0 14.2 2.8 2.4 9. /8-24UNF YHB00R-14S-**-*** 24.0.2 1.2 2.0 47.0 14.2.2 0.0 9. /4-20UNF YHB00R-1S-**-*** 27.40.2 1.2 24. 47.0 14.2.2 2. 9. 7/8-20UNF YHB00R-1-**-*** 27.40.2 1.2 24. 8.0 19.0.2 2. 9. 7/8-20UNF YHB00R-18-**-*** 0.80.2 19.2 27.0 8.0 19.0 4.0.0 9. 1-20UNF YHB00R-20-**-*** 4.20.2 22.0 29.4 8.0 19.0 4.0 8.0 9. 1 /1-18UNF YHB00R-22-**-*** 7.40.2 24. 1.8 9.0 19.0 4.0 41.0 9. 1 /1-18UNF YHB00R-24-**-*** 40.90.7 27.8 4.9 1.0 20. 4.0 44. 9. 1 7/1-18UNF YHB00R-28-**-*** 4.70.7 1.2 9.7 7.0 20. 4.0 0.8 9. 1 7/1-18UNF YHB00R-2-**-***.40 4. 7.8 44. 71.0 22.2 4.0 7.0 11.0 1 /4-18UNS YHB00R--**-*** 9.0 4. 4.0 49.2 71.0 22.2 4.0. 11.8 2-18UNS In-line receptacle YHB00G 와옵션에따른개량정보참조. / G Style - 절연체패킹및부싱제외. 정사각형플랜지형상이며패널의앞쪽에장착함. 부트를사용할수있으며, 절연체패킹및부싱포함되어전선방수가가능한구조임. ( 패널이플랜지후면에붙음 ) Refer to the measurement information following YHBOOG and options. G Style - excludes insulator packing and bushing. square flange type product that is mounted in front of the panel. Can use boots and includes insulator packing and bushing and its structure makes wire water resistance possible. (Panel is positioned at the back of flange) YHB01R 과옵션에따른개량정보참조. 정사각형플랜지형상이며, 엔드벨에악세사리를함께사용가능함. 절연체패킹및부싱이포함되어 전선방수가가능한구조임. 케이블측에사용함. Refer to the measurement information following YHB01R and options. square flange type and can use accessories together at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. Used for cables. 1-0.1 2 4 L ±0. L 1 2-0.1 +0.1 L L V Thread. (Class: 2) YHB00**-10SL-**-*** 18.20.2 17.0 1. 1. 7.9 18.2 4.0 14.2 2.8 2.4 11.7 YHB00**-14S-**-*** 24.0.2 20.1 19.1 17.0 10.8 2.0 47.0 14.2.2 0.0 11.7 YHB00**-1S-**-*** 27.40.2 2. 2.9 21.9 1.7 24. 47.0 14.2.2 2. 11.7 YHB00**-1-**-*** 27.40.2 2. 2.9 21.9 1.7 24. 8.0 19.0.2 2. 11. YHB00**-18-**-*** 0.80.2 2. 2.9 21.9 14.8 27.0 8.0 19.0 4.0.0 11. YHB00**-20-**-*** 4.20.2 0.2 29. 2.2 18.9 29.4 8.0 19.0 4.0 8.0 12.4 YHB00**-22-**-*** 7.40.2. 29. 2.2 21.0 1.8 9.0 19.0 4.0 41.0 12.4 YHB00**-24-**-*** 40.90.7.1 7.8 4. 24.8 4.9 1.0 20. 4.0 44. 12.7 YHB00**-28-**-*** 4.70.7 41.4 7.8 4. 27.2 9.7 7.0 20. 4.0 0.8 12.7 YHB00**-2-**-***.40 4. 48. 47.8 4.. 44. 71.0 22.2 4.0 7.0 1.2 YHB00**--**-*** 9.0 4. 4.8 47.8 4. 8.7 49.2 71.0 22.2 4.0. 1.2 YHB01R-10SL-**-*** 2.2 18.20 10.4 4.0 14.2 2.8 20. 9. /8-24UNF YHB01R-14S-**-*** 29.8 24.0 1.2 47.0 14.2.2 2.4 9. /4-20UNF YHB01R-1S-**-*** 2. 27.40 1.2 47.0 14.2.2 28. 9. 7/8-20UNF YHB01R-1-**-*** 2. 27.40 1.2 8.0 19.0.2 28. 9. 7/8-20UNF YHB01R-18-**-*** 4.8 0.80 19.2 8.0 19.0 4.0 1.7 9. 1-20UNF YHB01R-20-**-*** 7.8 4.20 22.0 8.0 19.0 4.0 4.9 9. 1 /1-18UNF YHB01R-22-**-*** 41.1 7.40 24. 9.0 19.0 4.0 8.1 9. 1 /1-18UNF YHB01R-24-**-*** 44. 40.90 27.8 1.0 20. 4.0 41. 9. 1 7/1-18UNF YHB01R-28-**-*** 0.9 4.70 1.2 7.0 20. 4.0 47. 9. 1 7/1-18UNF YHB01R-2-**-*** 7.1.40 7.8 71.0 22.2 4.0 4.0 11.0 1 /4-18UNS YHB01R--**-***. 9.0 4.0 71.0 22.2 4.0 0. 11.8 2-18UNS 18 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 19

In-line receptacle YHB01F 와옵션에따른개량정보참조. / YHB01F - 절연체패킹및부싱제외. 정사각형플랜지형상이며, 엔드벨에케이블 클램프와고무부싱포함된제품이며, 절연체패킹및부싱이포함되어 전선방수가가능한구조임. 케이블측에사용함. YHB01F and options. / YHB01F - excludes insulator packing and bushings. square flange type and includes cable clamp and rubber bushings at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. Used for cables. YHB0R 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. YHB0R and options. square flange type and mounted at the back of the panel. (Panel is positioned in front of flange). Panel mounting hole is a screw-type. 1 2-0.1 L L 1-0.1 2 0 L ±0. YHB01**-10SL-**-*** 2.2 18.20.8 4.0 14.2 2.8 20. 22.7 YHB01**-14S-**-*** 29.8 24.0 7.92 9.0 14.2.2 2.4 27. YHB01**-1S-**-*** 2. 27.40 11.09 71.0 14.2.2 28. 0.0 YHB01**-1-**-*** 2. 27.40 11.09 82.0 19.0.2 28. 0.0 YHB01**-18-**-*** 4.8 0.80 14.27 82.0 19.0 4.0 1.7 2.2 YHB01**-20-**-*** 7.8 4.20 1.87 82.0 19.0 4.0 4.9 7. YHB01**-22-**-*** 41.1 7.40 1.87 8.0 19.0 4.0 8.1 7. YHB01**-24-**-*** 44. 40.90 19.0 87.0 20. 4.0 41. 4. YHB01**-28-**-*** 0.9 4.70 19.0 9.0 20. 4.0 47. 4. YHB01**-2-**-*** 7.1.40 2.79 99.0 22.2 4.0 4.0 1.7 YHB01**--**-***. 9.0 1.7 100.0 22.2 4.0 0. 8.0 YHB0R-10SL-**-*** 18.20 1.2 M4x0.7 18.2 27.9 18.20 2.8 2.4 YHB0R-14S-**-*** 24.0 19.2 M4x0.7 2.0 27.9 18.20.2 0.0 YHB0R-1S-**-*** 27.40 22.4 M4x0.7 24. 27.9 18.20.2 2. YHB0R-1-**-*** 27.40 22.4 M4x0.7 24. 4.1 2.0.2 2. YHB0R-18-**-*** 0.80 2. M4x0.7 27.0 4.1 2.0 4.0.0 YHB0R-20-**-*** 4.20 29.0 M4x0.7 29.4 4.1 2.0 4.0 8.0 YHB0R-22-**-*** 7.40 2.2 M4x0.7 1.8 4.1 2.0 4.0 41.0 YHB0R-24-**-*** 40.90. M4x0.7 4.9 4.1 2.0 4.0 44. YHB0R-28-**-*** 4.70 41.4 Mx0.8 9.7.0 24.0 4.0 0.8 YHB0R-2-**-***.40 47.8 Mx0.8 44. 7. 24.0 4.0 7.0 YHB0R--**-*** 9.0 4.1 Mx0.8 49.2 7. 24.0 4.0. VG924 Style (YHB02R Style) YHB02R 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의앞쪽에장착함. ( 패널이플랜지후면에붙음 ) YHB00 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. 뒤쪽나사부에따른악세사리선택사용가능함. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. YHB01R and options. square flange type and mounted in front of the panel. (Panel is positioned at the back of flange). Panel mounting hole is a hole-type. YHB00 and options. square flange type and mounted at the back of the panel. Can selectively use accessories with screw parts at the back. (Panel is positioned in front of flange). Panel mounting hole is a screw-type. 1-0.1 2 L ±0. 1-0.1 2 ±0. 0 L ±0. V Thread. (Class : 2) YHB02R-10SL-**-*** 18.20 1.9.2 18.2 2.0 14.2 2.8 2.4 YHB02R-14S-**-*** 24.0 19.2.2 2.0 2.0 14.2.2 0.0 YHB02R-1S-**-*** 27.40 22.4.2 24. 2.0 14.2.2 2. YHB02R-1-**-*** 27.40 22.4.2 24. 4.1 19.0.2 2. YHB02R-18-**-*** 0.80 2..2 27.0 4.1 19.0 4.0.0 YHB02R-20-**-*** 4.20 29.0.2 29.4 4.1 19.0 4.0 8.0 YHB02R-22-**-*** 7.40 2.2.2 1.8 4.1 19.0 4.0 41.0 YHB02R-24-**-*** 40.90..7 4.9.0 20. 4.0 44. YHB02R-28-**-*** 4.70 41.4.7 9.7.0 20. 4.0 0.8 YHB02R-2-**-***.40 47.8 4. 44. 7. 22.2 4.0 7.0 YHB02R--**-*** 9.0 4.1 4. 49.2 7. 22.2 4.0. YHB00-10SL-**-*** 18.20 M4x0.7 18.2 27. 18.20 2.8 2.4 /8-24UNF YHB00-14S-**-*** 24.0 M4x0.7 2.0 27. 18.20.2 0.0 /4-20UNF YHB00-1S-**-*** 27.40 M4x0.7 24. 27. 18.20.2 2. 7/8-20UNF YHB00-1-**-*** 27.40 M4x0.7 24..8 2.0.2 2. 7/8-20UNF YHB00-18-**-*** 0.80 M4x0.7 27.0.8 2.0 4.0.0 1-20UNF YHB00-20-**-*** 4.20 M4x0.7 29.4.8 2.0 4.0 8.0 1 1/8-18UNF YHB00-22-**-*** 7.40 M4x0.7 1.8.8 2.0 4.0 41.0 1 1/4-18UNF YHB00-24-**-*** 40.90 M4x0.7 4.9.8 2.0 4.0 44. 1 /8-18UNF YHB00-28-**-*** 4.70 Mx0.8 9.7.7 24.0 4.0 0.8 1 /8-18UNF YHB00-2-**-***.40 Mx0.8 44. 7. 24.0 4.0 7.0 1 7/8-1UN YHB00--**-*** 9.0 Mx0.8 49.2 7. 24.0 4.0. 2 1/1-1UN 20 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 21