BODYWORK AND INTERIOR

BODYWORK AND INTERIOR Innovation is our mission!

PAGE VEHICLE LIGHTING AND BUMPERS 36 PLASTIC REPAIR 36-37 PARKING SENSOR TOOLS 37-38 TRIM 38 DOOR HINGES AND HANDLES 38-3 DOOR OPENER 3-40 EXTERIOR MIRROR 40 LEVER AND SEPARATING TOOLS 40-42 BODY BORING TOOLS 43-45 COOLANT 45 SPOT WELD DRILLS 45-46 BENDING AND PULLING TOOLS 47-5 HAMMERING TOOLS 5-5 WING BRAKE PIPE FLARING 5 BODYWORK FILES 60 HOLE, SETTING, AND SEAM PLIERS 60-6 SHEET METAL NIBBLER AND SNIPS 6-64 PANEL SAWS 64 LOCKING PLIERS 64-6 BLIND RIVET TOOLS 6-7 WELDING 72-74 SURFACE TREATMENT 74-7 INTERNAL CLEANING 80 WIRE BRUSHES 80-82 STEERING WHEEL AND FITTING 82-83 AIRBAG 83-85 LOCKING CYLINDER 85 RADIO AND NAVIGATION SYSTEM 86-88 CLIP, RIVET AND EXTRACTION TOOLS 88-0 2 3 4 5 6 7 8 0 2 3 4 5 6 7 8 2 22 24 26 i

VEHICLE LIGHTING AND BUMPERS ERGOTORQUEplus T-handle TX key wrench, long Extra-long design Continuous hardened Tip burnished Chrome plated and mirror polished Application range: Fittings, engine, bumper, headlamps, fuse boxes, etc. ERGOTORQUE screwdriver for phillips screws PH DIN/ISO 8764 piece handle Optimal power transmission With suspension hole Hardened blade Chrome finish with burnished tips Blade made of chrome vanadium Application range: Headlamp adjustment screwdriver for Volkswagen Golf 3, Vento, etc. Brake lights removal fork set Suitable for disassembling the brake light from the tail gate Allows the correct unlocking of the retaining clamps High accuracy of fit For manual operation With PVC dipped handle Matt finish Chrome vanadium Application range: Mercedes E Class (W) T model.88 PH 2 350.0 0.0 00.0 40 58.805 T0 403.0 373.0 80.0 30 58.8052 T5 403.0 373.0 80.0 30 58.8053 T 403.0 373.0 00.0 40 58.8054 T 408.0 373.0 00.0 40 58.8055 T27 408.0 373.0 00.0 40 58.8056 T30 408.0 373.0 00.0 45 ERGOTORQUEplus T-handle TX key wrench set Extra-long design Continuous hardened Tip burnished Chrome plated and mirror polished Application range: Fittings, engine, bumper, headlamps, fuse boxes, etc. Incandescent bulbs pliers With protecting foam material For the removal and replacement of incandescent bulbs With internal spring Plier jaws with foam protection material Suited for glass socket lamps of 4,0 mm until 6,0 mm Special plastic 50.6 4 pcs 35.0 260 PLASTIC REPAIR Hot stapler set for plastic repair (cordless) Suitable for the repair of cracks or similar damage to plastic parts (from mm thick) Also for plastics with a glass fibre content of max. 40% Battery operated, mains independent working Can also be used directly connected to the power supply Heating rod holder for different repair clamps with Ø 0.6 and 0.8 mm Heats the clamps with approx. 00-0 C Folding and with stand foot One battery charge lasts for approx. 50 repair clamps With 00 different clips per type Repair clamps are pressed into the break and give the plastic body its permanent stability back Includes operating, battery status and charge display Do not use on pure fibre-glass reinforced plastic or carbon Application range: Bumpers, panels, covers, etc. 5.054 0-32 45.0 60.0 70 58.8050 6 pcs T0 - T5 - T - T - T27 - T30 375 Headlamp adjusting key Audi Ideal for the adjustment of the headlamps Extra-long design with T-handle With suspension hole Continuous hardened Multi-tooth head with centring pin, bronzed Chrome plated Chrome vanadium Application range: Audi A4 (8K), A6 (4G), A5 (8T) Hexagonal tube socket for bumper screw 6-point For actuating the bumper screw at the rear Internal square Extra-long design for actuating the screw via the threaded rod Allows controlled tightening of the screw to the torque specified by the manufacturer For manual operation Matt finish Chrome vanadium Application range: Mercedes type 4, Audi A3 from 04, A4 from 0, A6 from 05, TT from 07 input current: output current: Battery charger: Charging time: DC 5 V 2 A DC 3.7 V max. 8A 00-240V / 50/60Hz 3-4 hours 50.805 345.0 70 7.4 0,0 3,0 60.0 60 50.035 302 pcs Hot stapler set for plastic repair (cordless).30 36

Plastic soldering iron 2 50.036 Plastic repair device 400 50.037 Power supply 2 V, 00-240 V, 50-60 Hz 3 50.05 Repair staple U-format Ø 0,6 mm Ideal for small plastic repairs, e.g. cracks in the bumper, wings, engine panels, etc. Electrically-operated micro soldering device Includes holder 60.6 Plastic soldering iron 0 60.7 Soldering iron add-on, Ø.0 mm 7 60.8 Soldering iron add-on, Ø 2.0 mm 500.7 Precision flat-head screwdriver, 3 mm 3 50.057 Repair staple U-format Ø 0,8 mm 50.052 Repair staple V-format Ø 0,6 mm Repair staples Suitable for repairing breaks on headlamps, bumpers, etc. The clamps are fused into the breaks Rust-proof Stainless steel.6 Brass wire spark plug wire brush, 2 rows 60. Cleaning file, round 6 Reinforcement mats set, 3 pcs., 00 x 60.2 55 mm PE (Polyethylene) repair sticks set, 6 pcs., 60.22 black 5 PE (Polyethylene) repair sticks set, 6 pcs., 60. black 5 PS (Polystyrene) repair stick set, 6 pcs., 60.24 black 5 60. ABS repair stick set, 6 pcs., black 5 4 5 6 PARKING SENSOR TOOLS 7 Parking sensors pin wrench 50.05 U-form 0,6 00 50.057 U-form 0,8 00 Repair staples Suitable for repairing breaks on headlamps, bumpers, etc. The clamps are fused into the breaks Rust-proof Stainless steel 60 Watt Voltage range:, 2V / 0V / 240 V - 50Hz / 60Hz Working temperature: 0-400 C Cable length:.35 m Heating blade: 5 x 26 mm 60. 260.0 60 Reinforcement mat Suitable for plastic repairs Gives the plastic a secure hold For use alongside standard plastic soldering irons Suitable for assembly and removal of parking sensors, which are integrated into the front and rear bumpers Allows professional tightening to the prescribed torque Internal square in accordance with DIN 32/ISO 74 High accuracy of fit For manual operation Matt finish Chrome vanadium Application range: Mercedes S Class (W40) and E Class (W) 8 0 2 3 4 50.053 W shaped 0,6 00 50.05 W shaped 0,8 00 60.26 50 x 0 mm 5 5 Repair staples Suitable for repairing breaks on headlamps, bumpers, etc. The clamps are fused into the breaks Rust-proof Stainless steel Plastic soldering iron set Ideal for small plastic repairs, e.g. cracks in the bumper, wings, engine panels, etc. Gas-operated micro soldering device With piezo ignition Adjustable gas supply With various repair sticks and reinforce mats Filled with standard lighter gas/iso butane gas In durable plastic storage case 7.424 35.0 360 Hole punch set for parking sensors (PDC) Ideal for punching holes into the bumper for parking sensors Allows the optimum diameter for parking sensors With various punches varying in size No damage to the paint when cutting out the holes Repainting is not necessary Parking sensors must be inserted to the exact millimetre due to their sensitivity Includes mandrels with which the parking sensors can be attached precisely to the bumper In durable plastic storage case 6 7 8 50.052 V-form 0,6 00 50.058 V-form 0,8 00 Repair staples 2 Suitable for repairing breaks on headlamps, bumpers, etc. The clamps are fused into the breaks Rust-proof Stainless steel 22 24 50.055 U-form 0,6 00 50.06 U-form 0,8 00 60.5 33 pcs Plastic soldering iron set 60 40.40 4 pcs Hole punch set for parking sensors (PDC) 2.36 26 37 i

40.42 Knob with ball bearing 360 Punch set with pin, 3 pcs., Ø 8.2 mm 40.43 (VW, BMW) 40 40.46 Punch set with pin, 3 pcs., Ø 24.0 mm (Opel) 240 40.48 Punch set with pin, 3 pcs., Ø 26.0 mm (VW) 280 40.52 Punch set with pin, 3 pcs., Ø 32.0 mm BMW) 380 40.54 Drill, 0 mm 40 Induction pad Heat-resistant material Gentle on painted surfaces Flat and flexible surface Simple handling Can be used in conjunction with induction heating gun 500.84- Application range: Removal of stickers, type plates, emblems, decorative strips, self-adhesive films and small trims on painted surfaces ERGOTORQUEplus T-handle TX key wrench, long Extra-long design Continuous hardened Tip burnished Chrome plated and mirror polished Application range: Fittings, engine, bumper, headlamps, fuse boxes, etc. accessories: 40.56 Punch set with pin, 3 pcs., Ø 8.0 mm (Škoda) 40.58 Punch set with pin, 3 pcs., Ø 26.7 mm (Škoda) 80 340 TRIM MASTER Induction Heat Gun Set For loosening rusted and seized connections For loosening insoluble glued connections Induction principle Pinpoint heating in seconds Heating of components to max. 780 C (red hot) Application range: Screws, nuts and bolts, exhaust clamps and pipes, lambda probes, running gear, stuck bearings, ball joints, steering (e.g. tracking adjustment screws), chemically micro-encapsulated threaded connections (bonded), warming of bearing housings during dismantling and assembly 500.8440 00 x 00 260.0 75 Trim and window mounting set For fixing and holding trims, emblems and windscreen mountings Wide side can also be used as a scraper or lever With suction cup Quick and easy mounting Simple to remove by lifting the tab Dosing of the contact pressure with the wing nut 58.805 T0 403.0 373.0 80.0 30 58.8052 T5 403.0 373.0 80.0 30 58.8053 T 403.0 373.0 00.0 40 58.8054 T 408.0 373.0 00.0 40 58.8055 T27 408.0 373.0 00.0 40 58.8056 T30 408.0 373.0 00.0 45 ERGOTORQUEplus T-handle TX key wrench set Extra-long design Continuous hardened Tip burnished Chrome plated and mirror polished Application range: Fittings, engine, bumper, headlamps, fuse boxes, etc. 40.0 6 pcs 80.0 85.0 0 X 40.02 6 Trim assembly suction set, 6 pcs., Ø 85 mm 40 DOOR HINGES AND HANDLES 500 Watt 500.845 2 pcs MASTER Induction Heat Gun Set 3.88 500.84- Induction heat gun 830 500.843 Induction coils 5mm, standard 48 500.8432 Induction coils mm, standard 53 500.8433 Induction coils 22mm, standard 54 500.8434 Induction coils 26mm, standard 54 500.8435 Induction coils 32mm, standard 64 500.8436 Induction coils 38mm, standard 70 500.84 Induction coils 22mm, extra long 760 500.8424 Induction coils 26mm, extra long 80 500.8450 Induction coil, cable, fully flexible, standard 62 500.8445 Induction coil, semi-rigid, deformable, universal 42 500.8440 Induction pad 75 Door lock screwdriver Spline (XZN ) Suitable for the assembly and disassembly of the door lock screws Also suitable for the external door handle piece handle Blade made of chrome vanadium Application range: Audi TT, Volkswagen Golf 4, Passat B5, Lupo, New Beetle, Bora, Seat, Škoda, etc..7 M4.0.0 50 58.8050 6 pcs T0 - T5 - T - T - T27 - T30 375 Door hinge socket wrench TX-E Ideal for the assembly and disassembly of the deep-seated door hinge holding screws on the rear hinged door and sliding door Internal square in accordance with DIN 32/ISO 74 Long design Phosphate Application range: Mercedes Sprinter from 05 and Volkswagen LT.445 E0 50.0 260 38

Central cable plug - grooved nut key Special door hinge and alignment wrench set DOOR OPENER 2 3-stage adjustable groove nut key For the disassembly and assembly of difficult to access central cable connectors on the A-pillar (installed in door frame) Easy to use Sturdy design Application areas: Ford (Galaxy), Seat (Alhambra), Škoda and Volkswagen (Polo, Sharan) For the assembly and disassembly of door hinges Ideally suitable for door alignment Extra short bits with ball locking Includes ratchet with bit adaptor In durable plastic storage case Application range Volkswagen, Audi, Seat, Mercedes, Renault, etc. Panel bag Universal usage for positioning, fixing and separating body parts Ideal for the damage-free opening of car doors Levelling tool for the installation of door and window frames Extremely high pressure power Easy to pump with the hand pump Robust panel bag 3 4 5 6 7 8 5.306 Central cable plug - grooved nut key 240 Door handle release tool For removal of the cap of door handles without lock cylinder Necessary for removal of the door handle For release of the locking hook in confined spaces With hanging hole Chrome vanadium 0 Application range: Volkswagen Golf 6 from MY 08 / Fox from MY 05 / Passat B6 (3C) from MY / Tiguan from MY 2 6.035 0.0 50.0 0 3 40.280 pcs Special door hinge and alignment wrench set 40 40.28 Double ended dual offset wrench, Length 300 mm 40 40.282 5/6 Bit ratchet angled, length 40 mm 0 40.283 5/6 Special bit, XZN M8 0 40.284 5/6 Special bit, XZN M0 0 40.285 5/6 Special bit, XZN M2 Panel bag set with hand pump Universal usage for positioning, fixing and separating body parts Ideal for the damage-free opening of vehicle doors Levelling tool for the installation of door and window frames For separating interior trim Pumping via a hand pump with valve connector Release valve on the bellows Extremely high pressure power 4 5 6 40.286 5/6 Special bit, TORX T30 0 50.60 260.0 50.0 0.0 40 40.287 5/6 Special bit, TORX T40 0 40.288 5/6 Special bit, TORX T45 0 40.28 5/6 Special bit, TORX T50 0 7 Door hinge roll pin drift set For the dismantlement of instep cases in door hinges For all passenger car and transporter doors Surface zinc-plated Universal straightening iron For alignment of passenger car and van doors Also suitable for car boot and hatchbacks Double-walled execution Includes 3 different interchangeable special bolts Storage of the 3 special bolts covenient in the pipe grip magazine Chrome plated and mirror polished 8 2 22 40. 4 pcs Door hinge roll pin drift set 450 50.685 4 pcs Panel bag set with hand pump 300 24 40.2 Impact iron with PVC-handle, length mm 366 50.686 Hand bellows 84 40.22 Extraction pin Ø 3,5 mm length 5 mm 2 50.687 Panel bag 80 x 40mm 40. Extraction pin Ø 4.5 mm length 5 mm 40.24 Extraction pin Ø 5.5 mm length 5 mm 50.605 700.0 50.606.30 50.688 Panel bag 0 x 60mm 27 50.68 Panel bag 60 x 60mm 47 26 3 i

Automobile car door lock opener set Wide range of round and flat steel tools, nylon wedge and universal gas cap key For opening locked car doors from outside Ideal for towing service Can be used on most common vehicle models In durable leather case Note: Does not work with modern vehicles with electronically controlled locking systems ERGOTORQUEplus T-handle TX key wrench, long Extra-long design Continuous hardened Tip burnished Chrome plated and mirror polished Application range: Fittings, engine, bumper, headlamps, fuse boxes, etc. LEVER AND SEPARATING TOOLS Bending iron/pry bar 6-point Quenched and tempered Forged Cone polished 2.2222 22.0 5.0 405.0 6.0 650 50.630 6 pcs Automobile car door lock opener set 2.55 Door opening wire, button and auxiliary 50.6 hook 0 50.62 Door opening wire, double slide hook 70 Door opening wire, Toyota Camry/Chrysler 50.63 tool 0 50.64 Door opening wire, Mercedes/Volvo tool 60 50.65 Door opening wire, dual tool 30 50.66 Door opening wire, Japanese/button hook 0 50.67 Door opening wire, Porsche tool Door opening wire, Chevrolet Astro/ 50.68 Camaro tool 60 50.6 Door opening wire, double curve 50.6 Door opening wire, button pull 50.62 Door opening wire, wonder tool 40 50.622 Strip type catches small f.50.630 60 50.6 Strip type catches wide f.50.630 50.624 Plastic strip f.50.630 0 50.6 Nylon window wedge f.50.630 40 50.626 Double ended fuel cap key f.50.630 0 58.805 T0 403.0 373.0 80.0 30 58.8052 T5 403.0 373.0 80.0 30 58.8053 T 403.0 373.0 00.0 40 58.8054 T 408.0 373.0 00.0 40 58.8055 T27 408.0 373.0 00.0 40 58.8056 T30 408.0 373.0 00.0 45 ERGOTORQUEplus T-handle TX key wrench set Extra-long design Continuous hardened Tip burnished Chrome plated and mirror polished Application range: Fittings, engine, bumper, headlamps, fuse boxes, etc. Pry bar Ideal for assembly and disassembly work Ergonomic one component handle Hardened through the whole length EXTERIOR MIRROR Double ended mirror screwdriver Clip for the breast pocket Knurled grip Aluminium.80.0 0.0 5.0 30.802 5.0 300.0 85.0 2.803 8.0 450.0 3.0 4.804 8.0 600.0 470.0 560 Pry bar sets Ideal for assembly and disassembly work Ergonomic one component handle Hardened through the whole length 40.226 T5 x PH0.0 50 40.227 2,0 mm x 3/32.0 50 40.228 T5 x T.0 50 ERGOTORQUEplus screwdriver for TX screws, tamperproof Perfectly suited to assembly and disassembly of wing mirrors Optimal power transmission With suspension hole Hardened blade Chrome finish with burnished tips Blade made of chrome vanadium Application range: Mercedes W3 (C Class) and W4 (E Class) 58.8050 6 pcs T0 - T5 - T - T - T27 - T30 375 Wing mirror pliers Perfectly suited to assembly and disassembly of wing mirrors With opening limits With adjusting screw and spring With PVC dipped handle Special tool steel Application range: Wing mirrors for BMW E2, E2, E24, E28, E30, E3, E32, E34, E36, E38 and E3.800 4 pcs x 5 mm - 5 x 85 mm - 8 x 3 mm - 8 x 470 mm.33 5.054 TB 5.0 00.0 05.0 50 5.305 65.0 80 40

Mechanics pry bar Intexable ratchet pry bar Telescopic flexible roll head pry bar 2 Angular lever end guarantees non-slip surface With go through blade and hammer cap Ideally suited to assembly and disassembly work For pressure testing securely-fitted parts Suitable for positioning parts or holding parts in place Suitable for the testing of defective bearings Heavy design especially for commercial vehicles Extremely versitile and robust execution Varible adjustable roll head Maximum power transmission in the narrowest area Optimal leverage in minimal work area Ideally suited for commercial vehicles Handle can be lengthened by the push button in ratchet steps Rolling head adjustable in stages Extra thin with embedded rolling head Maximum power in the smallest areas Optimal leverage in minimal work area Ideally suited to assembly and disassembly work For pressure testing securely-fitted parts Suitable for positioning parts or holding parts in place Suitable for the testing of defective bearings Ideal for use in passenger cars and commercial vehicles 3 4 5 6 7 8 0.84 0 00.0.70.842 45 00.0.75.843 75 600.0.7.844 0 600.0..845 45.0 4.75 Mechanics pry bar set.876 0.0 5 600.877 300.0 5 600.878 400.0 5 600.87 6.0 5 80.886 3-460 0.0 2.0 780.887 600-5.0.0 00 2 3 Angular lever end guarantees non-slip surface With go through blade and hammer cap Ideally suited to assembly and disassembly work For pressure testing securely-fitted parts Suitable for positioning parts or holding parts in place Suitable for the testing of defective bearings Heavy design especially for commercial vehicles In durable plastic storage case.888 865-350 45.0 24.0 4260 Bodywork slitting chisel Suitable for separating welds With re-grindable cutters Continuous blade 4 5 6 7 Adjustable joint roll head pry bar set Extremely versitile and robust execution Varible adjustable roll head Maximum power transmission in the narrowest area Optimal leverage in minimal work area Ideally suited for commercial vehicles 8 62.026 300.0.0.0 6.0 330 Bodywork slitting chisel Suitable for separating welds With re-grindable cutters Continuous blade 2 22.840 4 pcs Mechanics pry bar set 8.70.875 3 pcs Adjustable joint roll head pry bar set. 24.84 Mechanics pry bar, straight 00 mm.70.842 Mechanics pry bar 45, angled head 00 mm.75.876 Ratched pry bar, 0" 600.843 Mechanics pry bar 75, angled head 600 mm.7.844 Mechanics pry bar 0, angled head 600 mm..877 Ratched pry bar, 2" 600.878 Ratched pry bar, 5" 600 62.027 300.0.0.0 6.0 330 26 4 i

Bodywork slitting chisel Suitable for separating welds With re-grindable cutters Continuous blade Bodywork slitting chisel with hand grip DIN 75 Flat oval form Blade can be resharpened Extra flat Burnished Chrome vanadium Bodywork slitting chisel set Flat oval form Extensive range With re-grindable cutters Extra flat Bronzed, chrome vanadium Highly polished/chrome molybdenum 62.028 240.0.0.0 6.0 330 40.265 300.0 2.0.0 6.0 550 Bodywork slitting chisel set Suitable for separating welds With re-grindable cutters Continuous blade Bodywork slitting chisel Flat oval form Quenched and tempered Blade can be resharpened Shaft with gold coated lacquer Highly polished 40.245 4 pcs Bodywork slitting chisel set 2.00 56.0330 Bodywork chisel, 60x240mm 600 40.262 Sliiting chisel no grip, 300mm 30 40.265 Slitting chisel+grip,, 300mm 550 62.047 Slitting chisel, hand grip, 240mm 370 62.027 0.0 30.0.0 3.0 62.0442 460 Slitting chisel with hand grip Flat oval form Extra thin Blade can be resharpened Quenched and tempered Shaft with gold coated lacquer Highly polished Pneumatic chisel set Non slip soft grip handle Air exhaust through the handle Ergonomic designed handle For ripping out car body sheet metal with pneumatic air Ideal for industry Also suitable for loosening firmly rusted fittings Quick release chuck for quick chisel changing Stepless impact regulation Vibration dampened Cold insulated handle Includes /4 coupling connector and chuck Ultra light housing from two component plastic In durable plastic case 62.0 3 pcs Bodywork slitting chisel set.00 62.026 Bodywork separating chisel, straight 330 62.027 Bodywork separating chisel, 5 angled 330 62.028 Bodywork separating chisel, 0 angled 330 Bodywork slitting chisel DIN 75 Flat oval form Blade can be resharpened Extra flat Burnished Chrome vanadium 62.047 240.0 26.0 26.0 7.0 370 Bodywork spade chisel Extra wide execution With protective handgrip Quenched and through hardened For cutting metal sheet and spot welds Shaft with powder coated lacquer Chisel holder: 0 mm Number of blows: 0 blows/min 5,35 ms² 04. dba 0.4 dba 77.3 l/min max. 6,3 bar (0 psi) /4 PT 55.3840 7 pcs Pneumatic chisel set.70 40.262 300.0 2.0.0 6.0-30 56.0330 60.0 240.0 600 55.384 AIR CHISEL.50 55.3842 Rivet cutting chisel 0.7 55.3843 Spot weld chisel 0.6 55.3844 Flat chisel 0.6 55.3845 Pointed chisel 0.6 55.3846 Curved sheet metal cutting chisel 0.6 55.3847 Quick change retainer 0.0 42

Vibro impact pneumatic chisel hammer set BODY BORING TOOLS SlimPOWER mini-pneumatic angle drill 2 With non slip soft grip handle Air exhaust through the handle Ergonomic designed handle Ideal for industry Efficient, gentle loosening of screw fittings With stepless impact regulation Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light housing from two component plastic SlimPOWER mini-pneumatic straight drill Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design Not reversible With quick release chuck capacity - 6,5 mm For hard to reach places Ideally suited for car bodywork and industial working With stepless speed regulation Vibration dampened through double bearing guides Includes /4 coupling connector Robust housing Angled version Air exhaust through the handle rear end For one handed operation with ergonomic design Not reversible With gear rim drill chuck width - 6,5 mm For hard to reach places Ideally suited for car body work With stepless speed regulation Vibration dampened through double bearing guides Includes /4 coupling connector Robust housing 3 4 5 6 7 8 Chuck capacity: - 6,5 0 55.3880 6 pcs Vibro impact pneumatic chisel hammer set 5.70 55.388 Pneumatic chisel hammer 2.7 55.3882 Holder for pneumatic chisel hammer.55 55.3886 Pneumatic chisel track rod loosener,0mm 0.4 55.3887 Pneumatic chisel hammer,0mm 0.5 55.3888 Pneumatic chisel loosening adapter,30mm 0.6 55.388 Pneumatic chisel loosening mandrel,00xx2mm 0. Chuck capacity: Chuck thread reception: - 6,5 mm 3/8 x 24 UNF 0 Watt 6000 r.p.m. < 0,7 ms² 5 dba 80 dba 240.66 l/min /4-4,8 mm max. 5,5 bar (80 psi) /4 NPT Chuck thread reception: 3/8 x 24 UNF 0 Watt 4500 r.p.m. < 0,7 ms² 5 dba 83 dba 240.66 l/min /4-6,4 mm max. 6,3 bar (0 psi) /4 55.50 0.0 45.0 700 2 3 4 Special Vibro chisel set For loosening seized screw joints and loosening components Gentle peeling and driving Vibration is transmitted directly to the screw connections Impact mandrel attachment as ingenious aid to any removal operation For hexagonal and round 0 mm machine mountings Including pressure plate adapter for driving out bearings, sleeves, bushings Caution: Use only in conjunction with a pneumatic hammer chisel! 55.50 35.5 45.0 400 Pneumatic straight drill Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design Not reversible With quick release chuck capacity 0-0 mm For hard to reach places Ideally suited for car bodywork and industial working With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened through double bearing guides Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic Pneumatic angle drill Angled version With planetary gearing Air exhaust through the handle rear end For one handed operation with ergonomic design Not reversible With gear rim drill chuck width 0-0 mm For hard to reach places Ideally suited for car body work With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened through double bearing guides Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic 5 6 7 8 2 55.3885 4 pcs Special Vibro chisel set 774 55.3886 Pneumatic chisel track rod loosener,0mm 38 Chuck capacity: Chuck thread reception: - 0 mm 3/8 x 24 UNF 330 Watt 2600 r.p.m. < 0, ms² 5 dba 82 dba 85 l/min 3/8-0 mm max. 6,3 bar (0 psi) /4 NPT Chuck capacity: - 0 Chuck thread reception: 3/8 x 24 UNF 330 Watt 800 r.p.m. < 0,5 ms² 5 dba 87 dba 85 l/min 6,3 bar (0 psi) 3/8-0 mm /4 NPT 22 24 55.3887 Pneumatic chisel hammer,0mm 48 55.3888 Pneumatic chisel loosening adapter,30mm 5 55.388 Pneumatic chisel loosening mandrel,00xx2mm 0 55.30 44.0.0 750 55.265 0,0 00.0.5 26 43 i

Cordless drill machine Light weight Handy and ergonomic dual component housing Universal use through robust quick release chuck With practical clockwise and anticlockwise reversing function Stepless controllable motor speed through electronic switch With torque control Carbon brushes interchangeable With lithium ion high performance rechargeable battery Longer running time through higher load capacity Fast charging function ( hour) Automatic turn off charging station Blow mould plastic housing In durable plastic storage case Pneumatic pistol grip drill Low rotation speed Non slip soft grip handle Ultra light robust housing from special plastic Air exhaust through the handle Quick release chuck capacity 0-3 mm Practical clockwise and anticlockwise switch Suitable for continuous duty Ideally suited for working with hard to machine materials For spot weld drills, polishing and grinding wheels, erasing rubbers etc. Very substaintial guide Stepless speed regulation Vibration dampened Handle for 2 hand operation 360 revolving and lockable Cold insulated handle Includes /4 coupling connector accessories: 55.7 Counter bracket, small for 55.6 300 55.8 Counter bracket, large for 55.6 500 Pneumatic spot weld drill set Air exhaust through the handle Easy operation Suitable for continuous duty Ideally suited for internal and external spot welds For spot weld drills Very substaintial guide Adjustable milling machine depth ring in steps of 0,05 mm Revolving and removable frame on the fixation on the object Large frame for deep lying points Feed achievement through pneumatic cylinder Stepless speed regulation Includes /4 coupling connector Robust machined housing In durable plastic case Chuck capacity: Speed: Torque max. Charging time: Rechargeable battery: - 0 mm 0,8 V 0-870 rpm 24 Nm 3,5 A hour 0,8 V -,5 Ah Chuck capacity: Chuck thread reception:,5-3 mm 3/8 x 24 Gang 330 Watt 450 r.p.m. < 0,5 ms² 5 dba 87 dba 3 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 NPT 55.3534 0.0 55.0 0.0 55.355 55.352 0 0.60 55.3535 0.0 55.0 0.0 55.355 55.352 2.50 55.3536 0.0 55.0 0.0 55.355 55.352 2 2.70 55.3035 0.0 0.0 43.0.60 Pneumatic pistol grip drill Pneumatic spot weld drill Very handy and compact construction With non slip soft grip handle Air exhaust through the handle For one handed operation with ergonomic design With quick release chuck capacity 0-0 mm With practical clockwise and anticlockwise switch Suitable for continuous duty For working in hard to access areas Ideally suited for car bodywork and industial working With stepless speed regulation Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic Air exhaust through the handle Easy operation Suitable for continuous duty Ideally suited for internal and external spot welds For spot weld drills Very substaintial guide With adjustable milling machine depth ring in steps of 0,05 mm With revolving and removable frame to the fixation on the object With large frame for deep lying points Feed achievement through pneumatic cylinder With stepless speed regulation Includes /4 coupling connector Robust machined housing Drive: Ø 8 mm with set screw 500 Watt 600 r.p.m. < 0,2 ms² 0 dba 8 dba 280 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 IG 55.5 pcs Pneumatic spot weld drill set 2. 55.6 /2 pneumatic spot weld drill 2. 55.7 Counter bracket, small for 55.6 0.30 55.8 Counter bracket, large for 55.6 0.50 332.008 HSSE spot weld drill, Ø 8,0mm 0.02 Chuck capacity: Chuck thread reception: - 0 mm 3/8 x 24 UNF Drive: Ø 8 mm with set screw 55.336 Pneumatic tool oil, 00ml 0. 330 Watt 500 Watt 800 r.p.m. 600 r.p.m. < 0, ms² < 0,3 ms² 5 dba 0 dba 82 dba 8 dba 3 l/min 280 l/min max. 6,3 bar (0 psi) max. 6,3 bar (0 psi) 3/8-0 mm 3/8-0 mm /4 NPT /4 IG 55.3030 65.0 50.0 55.6 0.0 5.0 2. 44

Fastdrill pneumatic spot weld drill SPOT WELD DRILLS 2 Special drive for high torque With non-slip soft-grip-handle Air exhaust through the handle Suitable for continuous duty Ideally suited for internal and external spot welds For carbide spot weld drills Very substantial guide With revolving and removable frame on the fixation on the object Feed achievement through pneumatic-cylinder With stepless speed regulation Cold insulated handle Includes /4 coupling connector Robust machined housing 55.3 Fastdrill pneumatic spot weld drill.85 55.32 Bracket, small, for Fastdrill 0.55 55.34 T-handle wrench 0.04 COOLANT Cooling lubricant stick Suitable for working with centre bits, countersinks and stepped drills Contents 8g To prolong the service life HSS Spot weld cutter Right hand cutting Interchangeable crowns Milling machine depth adjustable For efficient and fast working For loosening of spot welds No deformation of the sheet metal Special high performance steel Ideally suitable with pneumatic drill, electric drill and rechargeable battery drill. 3 4 5 6 7 8 Drive in mm 8 mm 280 Watt 000 r.p.m. < 0,3 ms² 5.4 dba 82.4 dba 340 l/min 332.05 8.0 5/6 72.0 332.052 332.055 30 332.053 0.0 3/8 72.0 332.054 332.055 30 0 6 bar 3/8-0 mm /4 PT HSS Spot weld cutter set 55.3 75.0 35.0.85 accessories: 30.00 8 44 Right hand cutting Interchangeable crowns Milling machine depth adjustable For efficient and fast working For loosening of spot welds No deformation of the sheet metal Special high performance steel 2 3 55.32 Bracket, small, for Fastdrill 550 55.33 Bracket, big, for Fastdrill 800 Ideally suitable with pneumatic drill, electric drill and rechargeable battery drill. 4 Fastdrill pneumatic spot weld drill set 5 Special gearbox for high torque With non slip soft grip handle Air exhaust through the handle Suitable for continuous duty Ideally suited for internal and external spot welds For carbide spot weld drills Very substaintial guide With revolving and removable frame on the fixation on the object Feed achievement through Pneumatic-cylinder With stepless speed regulation Cold insulated handle Includes /4 coupling connector Robust machined housing 332.050 2 pcs 8-0 mm 00 HSSE Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points Surface without discolouration High performance steel 6 7 8 Ideally suited in a hand drilling machine. For drilling of plastic sheet, copper, zinc, aluminum, brass and steel sheet. 2 Drive in mm 8 mm 22 280 Watt 000 r.p.m. < 0,3 ms² 5.4 dba 82.4 dba 340 l/min 6 bar 24 3/8-0 mm /4 PT Please find our wide range of drills, tap and dies in our Hand Tools catalogue on page 500 to 507. 332.006 6.0 70.0.0 0 55.30 3 pcs Fastdrill pneumatic spot weld drill set 2.40 332.008 8.0 80.0 30.0 332.00 0.0 0.0 35.0 40 26 45 i

HSSE TIN Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points TIN coated surface High performance steel Ideally suited in a hand drilling machine. For drilling of plastic sheet, copper, zinc, aluminum, brass and steel sheet. HSSE TiN Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points TIN coated surface High performance steel Ideally suited in a pneumatic drill and vario milling machine. HSSE Double ended spot weld drill Right hand cutting Relieved cone has a ground point Cutting edge has thinning point 35 pointed angle Double ended usage Extra short and durable For thin walled materials Surface without discolouration High performance steel Ideally suitable in steel, cast steel and high and low alloyed steel up to 00 N/mm² tensile, bronze, brass, brushed aluminum alloy, graphite, nickel silver, sintered iron, pressure-, malleable- and cast iron 332.06 6.0 70.0.0 0 332.08 8.0 80.0 30.0 332.0 0.0 0.0 35.0 40 HSSE TICN Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points TICN coated surface High performance steel Ideally suited in a hand drilling machine. For drilling of plastic sheet, copper, zinc, aluminum, brass and steel sheet. 332.0508 6.5 44.0 5.0 0 332.0808 8.0 44.0 5.0 0 HSSE TiN Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points TIN coated surface High strength steel Ideally suited in a pneumatic drill and vario milling machine 332.008 8.0 70.0 6.3 HSS Double ended spot weld drill set Right hand cutting Relieved cone has a ground point Cutting edge has thinning point 35 pointed angle Double ended usage Extra short and durable For thin walled materials Surface without discolouration High performance steel Ideally suitable in steel, cast steel and high and low alloyed steel up to 00 N/mm² tensile, bronze, brass, brushed aluminum alloy, graphite, nickel silver, sintered iron, pressure-, malleable- and cast iron 332.0308 8.0 80.0 30.0 332.030 0.0 0.0 35.0 40 332.038 3 pcs 3 x 332.008 70 HSS Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points TICN coated surface High performance steel Ideally suited in a pneumatic drill and vario milling machine. 332.080 8.0 44.0.0 0 34 HSSE TiCN Spot weld drill Right hand cutting Centre tip has a ground point Accurate polished For burr free drilling without using a centre punch For the drilling of welding points TICN coated surface High performance steel Ideally suited in a pneumatic drill and vario milling machine. Carbide spot weld drill Right hand cutting Highest stability under load Double edged Welded carbide head Especially temperature resistance up to max. 00 C High performance carbide Suitable for high strength car body panels 332.0408 6.5 44.0 5.0 0 332.0708 8.0 44.0 5.0 0 332.0608 8.0 44.0 5.0 0 55.305 8.0 44.0.0 22 55.308 0.0 44.0.0 46

BENDING AND PULLING TOOLS Universal slide hammer with puller hook, 6+3 kg Super spotter - Welding gun 2V - 50/60 Hz 2 Slide hammer Flexible removal tool Internal thread for holding various pullers, bolts and hooks Ideal for removing ball bearings, wheel hubs, etc. Ideal in confined spaces Suitable for use with tensioning clamps Extra heavy and solid execution For universal use for automobiles + trucks Enormous impact delivery of up to tonnes With 6 kg impact force Includes 3 kg additional weight With M x.5 mm connection thread Additional weights can be screwed together Handy workshop tool For the repair of bodywork damage For hammering out body panels Plastic housing Attention idle cut-out: 0 Ampere Attention light cut-out: 0 Ampere 3 4 5 6 7 8 700.475 3 pcs Universal slide hammer with puller hook, 6+3 kg 3.24 0 40.2455 Universa pull hook.00 500.855 285.0 5.46 700.45 Universal slide hammer 6+3kg, 850mm 2.00 Slide hammer puller.5 kg 660.050 70 40.0 0,0 30.0 M0 0.40 660.0502 70 80.0 0,0 50.0 M0 0.0 660.0503 0 00.0 6,0 45.0 M0.30 660.0504 0 00.0 6,0 45.0 M0+G3/8.40 660.0505 0 00.0 6,0 60.0 G3/8 2.60 mm Edge hammering iron Suitable for professional hammering out edges and beads For hard-to-reach areas too Does not destroy the edges 4-edge handle for controlling the tool position in hollows Can be folded together For problem free hammerring out of car bodywork panels With.5 kg slide weight Usable in connection with the super spotter 2 3 4 Universal slide hammer Extra heavy and solid execution For universal use for automobiles + trucks Enormous impact delivery of up to tonnes With 6 kg impact weight Includes 3 kg additional weight With M x.5 mm connection thread Additional weights can be screwed together 40.2456 48.0 450.0.02 Universal clamping yoke Suitable for bodywork repairs Ideal for hammering our extremely deep lying areas Can be used with slide hammer (M x.5) Adjustable plastic slider for aluminium Robust design 500.855 475.0 80.0 500.856 2.08 Super spotter - Welding gun set Handy workshop tool For the repair of bodywork damage For hammering out body panels By means of special electrodes nails or washers are welded on the sheet metal so the dents can be removed with an impact hammer using accurate blows With a heat electrode placed hot points can be set on the sheet metal Also contains an electrode for welding copper-plated dome head screws for the reinforcement of housings, parts, etc. directly on the bodywork In durable plastic storage case Attention idle cut-out: Attention light cut-out: 0 Ampere 0 Ampere 5 6 7 8 2 22 700.45 850.0 2.00 accessories: 700.42 Adaptor ET UN./2 x IT M x.5 0.72 700.4 Adaptor for double hook 0.27 24 700.424 Universal hook M x.5 for ball joints + car body 2.40 700.4 Double hook 0.75 700.428 Adaptor ET UN./2 x IT M6 x 2.0 0.72 700.430 Adaptor ET UN./2 x IT M6 x,5 0.72 52.056 Single screw adaptor AG M7 x 0.24 700.4 Wheel hub/drive flange dismatling tool 2.55 40.28 600.0 Mx,5 5.70 500.8550 Super spotter - Welding gun set 0.3 26 47 i

500.855 Welding gun 2V, 50/60 Hz 5460 500.8554 Electrode for welding nails, Copper 0 500.8556 Electrode for rivets, magnetic, Copper 0 500.8557 Electrode for washers, Brass 0 500.8558 Heating electrode for hot spots, Brass 0 500.855 Slide hammer puller,5 kg 80 500.8560 Electrode extension, brass 0 Spotter-consumables, welding nails copper 500.857 caoted, 2.0 x 50 mm, pcs 500 660 Spotter consumables, copper plated, welding nails, 2,5 x 50 mm, pcs 00 500.8572 500.8574 Spotter-consumables, 3 x 3.2 mm, pcs 00 30 Spotter-consumables, screws copper 500.857 coated, M 4 x 6 mm, pcs 00 40 500.852 Washers 8.0 x 6.0 mm copper coated pcs 00 60 Super spotter consumables Usable in connection with the super spotter For the reinforcement of the car body Copper coated Hydraulic alignment tool kit, 0 t For pressing, clamps and spreading of car body parts Simple handling due to plug in connection Includes hydraulic hand pump/ high pressure cylinder 0 t, detachable handle simple handling due to plug in connection In durable wheeled storage case Super spotter addditional kit For removing of car body damage Includes the adaptor for the slide hammer puller The flexible and strong steel wire profile is used so the processing of securing car body panels The movable pull hooks situated can be pulled by the claw fastener straightening the carbody and/or the bump on It can be hooked on - pull hooks, at what point exact or extensive enabling the removal of dents 500.8570 Welding nail, 00pcs, 2x50mm 40 500.857 Welding nail, 500pcs, 2x50mm 660 500.8572 Welding nail, 00pcs, 2.5x50mm 500.8573 Welding nail, 500pcs, 2.5x50mm 50 500.852 Washer, 00pcs, 8x6mm 60 500.855 Triangular-washer 2.5 x 50.0 mm copper coated 00pcs 500 500.8574 Rivet, 00pcs, 3x3.2mm 30 500.8575 Rivet, 00pcs, 3x4.5mm 40 500.8576 Rivet, 00pcs, 5x8.2mm 40 500.857 Screw, 00pcs, M4x6mm 40 60.075 7 pcs Hydraulic alignment tool kit, 0 t 4.00 500.8530 5 pcs Super spotter addditional kit.04 Welding-Electrode for corrugated wire for 500.853 Spotter 500.8550 500.8532 Corrugated wire Ø 2 mm x L=30 mm 0 pcs. 22 500.8533 Corrugated wire positioner magnetic 34 500.8534 Multi hook head with 6 claw connection IG M4x.5 35 System adaptor for slide hammer puller IG 500.8536 M4x,5, for use with 500.855 86 Spotter consumables, copper plated, welding nails, 2,5 x 50 mm, pcs 00 500.8572 Super spotter electrodes Usable in connection with the super spotter Copper and/or brass Hydraulic vehicle alignment tool kit, 4 t For pressing, clamps and spreading of car body parts Simple handling due to plug in connection Includes hydraulic hand pump/ high pressure cylinder 4 t, detachable handle, pressure plate, and various attachments In durable plastic storage case with handle 60.076 Hydraulic pump f.body repair kit, 0 t 7.00 60.077 Hydraulic piston f.body repair kit, 0 t 5.55 60.078 Adaptor f.bodywork aligement tool.3 60.07 Extension tube f.body repair kit, 530mm 3.34 60.080 Extension tube f.body repair kit, 400mm.66 60.08 Extension tube f.body repair kit, 300mm.70 60.082 Extension tube f.body repair kit, 75mm.70 60.083 Adaptor f.body repair kit, MxM.66 60.084 Pressure plate, V form.4 60.085 Pressure plate, 50x5mm 0.66 60.086 Wedge adaptor (notched) 0.66 60.087 Pressure plate (laterally offset) 0.86 60.088 Piston attachment (laterally offset) 0.86 60.08 Rubber ball, Ø 80 mm 0.66 60.00 Adaptor head, cylinder serrated Ø 50 mm.4 Clamp for preparation working 60.0445 5 pcs Hydraulic vehicle alignment tool kit, 4 t 7.50 Ideally suited to avoiding deformations during preparation working Central tube can be rotated to short or lengthen the spanner With two adjustable jaws Robust design Application range: Boot, engine compartment, etc. 500.8554 Electrode for welding nails, Copper 0 500.8556 Electrode for rivets, magnetic, Copper 0 500.8562 Electrode for screws, Copper 500.8557 Electrode for washers, Brass 0 500.8558 Heating electrode for hot spots, Brass 0 500.8560 Electrode extension, brass 0 Hydraulic-Pump for bodywork alignment 60.0446 tool, 4 t 5. Hydraulic-piston for bodywork alignment 60.0447 tool, 4 t.80 Extension tube for bodywork alignment 60.0448 tool, 400 mm. Extension tube for bodywork alignment 60.044 tool, 300 mm 0.6 Extension tube for bodywork alignment 60.045 tool, 0 mm 0.70 Extension tube for bodywork alignment 60.0452 tool, 00 mm 0.45 60.0453 Adaptor extension 0. 60.0454 Pressure plate 0 x 65 mm 0.75 60.0455 Pressure plate, V form 0.3 60.0456 Piston attachment (laterally offset) 0.34 60.0457 Wedge adaptor (notched) 0.2 60.0458 Rubber ball, Ø 67 mm 0.26 60.045 Adaptor head, Cylinder serrated Ø: 35 mm 0. 60.046 Pressure plate (laterally offset) 0.3 60.0462 Adaptor for bodywork alignment tool, 4 t.73 Opening of jaws min: 000.0 mm Jaw width max: 0.0 mm Width replacement jaws: 00,0 mm 700.445 700.446 5.00 48

Universal tensioning clamp straightening iron Standard pull clamp with 2 pull directions Box pull clamp with adaptable jaws 2 Suitable for bodywork repairs and pulling 2 adjustable jaws for secure attachment Includes 2 blades Maximum load 5 tonnes Universal application by adjusting the adjustable jaws Robust design Two directions of pull Ideal for car body repairs Extremely versatile One direction of pull Extra instep Ideal for car body repairs Extremely versatile 3 4 5 6 7 8 700.457 450.0 6260 Mini pull clamp Two directions of pull Eyelet can be mounted to the left and right Ideal for car body repairs Extremely versatile 40.240 2.0 44.0.0 22,0-80,0 32.0 TG/M7x0 2.3 Small pull clamp 40.24 245.0 38.0 30.0 80,0-85,0 64.0 TG/M4x30 2.0 Box pull clamp with 2 pull directions 0 One direction of pull No distorting due to the security device Ideal for car body repairs Extremely versatile Two directions of pull Ideal for car body repairs Extremely versatile 2 3 4 5 6 40.2400 50.0 36.0 00.0 42,0 27.0 M2x,75 30 7 Standard pull clamp One direction of pull Ideal for car body repairs Extremely versatile 40.245 5.0 32.0 85.0,0-42,0 70.0 TG/M4x85.65 Box pull clamp One direction of pull Extra instep Ideal for car body repairs Extremely versatile 40.2430 245.0 38.0 55.0 80,0-45,0 64.0 TG/M4x30 2.2 Maxi pull clamp One direction of pull With extra large mouth Ideal for car body repairs Extremely versatile 8 2 22 24 40.2405 2.0 44.0 0.0 22,0-42,0 32.0 TG/M7x0.5 40.24 245.0 38.0 30.0 80,0-85,0 64.0 TG/M4x30 2.04 40.2435 240.0 46.0 50.0,0-00,0 42.0 TG/Mx50 3.00 26 4 i

Double jaw pull clamp One direction of pull No distorting due to the security device Ideal for car body repairs Extremely versatile Double jaw pull clamp with 3 pull directions Three directions of pull No distorting due to the security device Ideal for car body repairs Extremely versatile Pulling chain connector Ideal for connecting or shortening pulling chains Suitable for 3/8 and 5/6 chains Maximum load 0 tonnes Simple, secure and easy to use 40.2462 5.0.22 Universal bodywork tensioning clamp Ideal for car body repairs One direction of pull For narrow spaces Solid design 40.2440 75.0.0 0.0 22,0-36,0 32.0 TG/M7x0 2.4 Single-ended tensioning clamp One direction of pull With extra-large mouth Ideal for car body repairs Solid design 40.2450 75.0.0 40.0 22,0-35,0 32.0 TG/M7x0 3.40 V tensioning clamp One direction of pull Ideal for car body repairs Solid design For use alongside the universal slide hammer (700.45), adaptor (700.42), and double hook (700.4) 40.246 260.0 35.0 30.0.85 Universal tension plate Universal bodywork tensioning plate A variety of holes for aligning any standard frame and many module chassis Ideal for car body repairs Solid design 40.2404 70.0 40.0 32.0 TG/M4x0. Double jaw pull clamp with 2 pull directions Two directions of pull No distorting due to the security device Ideal for car body repairs Extremely versatile 40.2436 35.0 35.0 M2x70 0.67 Universal pull hook Universal car bodywork pull hooks Ideally suited for all ring eyelet tools High quality and compensated alloy steel 40.2460 300.0 75.0 2.0.00 Wing puller, small Ideal for removing the wings Suitable for universal use thanks to the different arches Also suitable for adjusting headlamp openings and door pillars Tensile force is distributed when pulling 40.2445 75.0.0 40.0 22,0-35,0 32.0 TG/M7x0 2.86 40.2455 2 pcs Universal pull hook.00 40.2465 60,0 2.0 80.0.50 50

Wing puller, large Aluminium panel beating hammer set Mini precision hammer set 2 Ideal for removing the wings Suitable for universal use thanks to the different arches Also suitable for adjusting headlamp openings and door pillars Tensile force is distributed when pulling For hammering out the car body Ideal for small dents and stone chips Replaceable plastic heads For gentle sheet metal working PVC dipped handle For hammering out the car body Ideal for small dents and stone chips Various metal and plastic heads for gentle sheet metal working Flexible handle in cone form In durable plastic storage case 3 4 5 6 7 8 40.5 5 pcs Aluminium panel beating hammer set 375 40.52 Panel beating hammer 333 40.522 Plastic head, flat 3 40.5 Plastic head, cone-shaped/long 40.245 7 pcs Mini precision hammer set 242 0 40.2470 3,0 5.0 80.0.80 HAMMERING TOOLS Heel dolly set 40.524 Plastic head, cone-shaped/short 8 40.5 Plastic head, cylindrical 3 Mini precision hammer set For hammering out the car body Ideal for small dents and stone chips Metal and plastic head for gentle sheet metal working Flexible handle in cone form 40.246 Mini precision hammer, 80 mm 53 40.247 Metal head, curved 5 40.248 Aluminium head, curved 6 40.24 Copper head, curved 8 40. Copper head, cylindrical 40.2 Plastic head, cylindrical 4 40.3 Plastic head, curved 7 2 3 Ideal for removing dents Ideal for hail damage Various head forms Simple handling Plastic handles With practical carrying bag Universal panel beating hammer set For hammering out the car body Practical configuration For stretching and forming of car body sheet panels Hammer with different attachments In durable plastic storage case 4 5 6 40.526 3 pcs 63 24,0 43.0 80.0 75 7 8 40.246 Mini precision hammer, 80 mm 53 40.247 Metal head, curved 5 40.3 Plastic head, curved 7 40.5245 4 pcs Universal panel beating hammer set.00 2 40.240 pcs Heel dolly set 3.80 22 40.5246 Universal hammer 0 40.5247 Corrugated attachment, coarse 66 40.5248 Corrugated attachment, fine 68 40.524 Hammering attachment, smooth 74 40.24 Semi-circular iron, 2 mm 00 40.242 Semi-circular iron, mm 00 40.243 Round iron, 4 mm 50 40.50 Hammering attachment, aluminium 32 40.5 Hammer attachment, copper 82 40.53 Hammer attachment, plastic 2 24 40.244 Semi-circular pointed iron, 600 mm 40.526 Tip attachment, conical/flat 64 40.245 Ball head iron, angled 460 mm 400 40.246 Ball head iron, angled, 000 mm 40.247 Special iron with hook, 070 mm 300 40.5262 Tip attachment, cone-shaped/tip 40 40.5263 Wedge adaptor 67 40.5264 Set of headless screws, 4 pcs. 4 40.248 Ball head iron, twice angled, 560 mm 500 40.24 Set of plastic tips, 3 pcs. 240 40.5265 Burr arbour 5 5.2602 BASIC key wrench, hex, short, 2mm 0 26 5 i

Kit of teflon wedges for varnished surface Ideal for reforming an over-compressed dent Hammering out without damage to paint Ridges are hammered out with targeted use of the hammer on the dents Also ideal for releasing tensioning in the sheet metal With interchangeable attachments Includes 2 handles Very rugged plastic Dent mirror with light Ideal for better identification of dents and bumps, e.g. hail damage Also suitable for mobile use Stripes are projected on to the paint by penetration With suction foot for straightforward use in the vehicle Freely adjustable using a gooseneck arm Arm can be easily separated from the screen with a snap lock for better transport 0 V cable connector Closed plastic housing Professional smart-repair dent puller set Suitable for repairing small dents or bumps No filling or painting work Allows the flexible removal of the dent and provides the best results Includes dent-pulling unit with rubber support feet With 0 different beating pads 4.0065 pcs Professional smart-repair dent puller set 36 40.2480 0 pcs Kit of teflon wedges for varnished surface 280 40.8 360.0 3.0 480 40.248 Handle, short, 0 mm 32 40.2482 Handle, long, 30 mm 50 40.2483 Cylinder-shaped impact head 6 40.2484 Impact head, wedge-shaped, round 3 40.2485 Impact head, wedge-shaped, square 2 40.2486 Impact head, cone-shaped, tip 0 40.2487 Impact head, cone-shaped, round 40.2488 Cylinder-shaped impact head with cone 0 40.248 Set of strike plates, 2 pcs., 55 mm Professional slide hammer set Suitable for repairing small dents or bumps No filling or painting work Allows the flexible removal of the dent and provides the best results Includes small slide hammer With 0 different beating pads 4.0067 Dent-pulling unit with rubber support feet 280 40.0 Self-adhesive sheets, round, flat, Ø 40 mm 5 40. Self-adhesive sheets, round, flat, Ø 35 mm 4 40.2 Self-adhesive sheets, round, flat, Ø 32 mm 4 40.3 Self-adhesive sheets, spherical, round, Ø mm 3 40.4 Self-adhesive sheets, spherical, round, Ø mm 3 40.5 Self-adhesive sheets, spherical, round, Ø 5 mm 2 40.6 Self-adhesive sheets, elliptical, flat, 48 x 33 mm 5 40.7 Self-adhesive sheets, elliptical, flat, 40 x 27 mm 4 40.8 Self-adhesive sheets, elliptical, flat, 33 x 22 mm 3 40. Self-adhesive sheets, rectangular, 32 x 7 mm 3 Dent mirror Ideal for better identification of dents and bumps, e.g. hail damage Also suitable for mobile use With suction foot for straightforward use in the vehicle Freely adjustable using a gooseneck arm Arm can be easily separated from the screen with a snap lock for better transport Plastic Pneumatic smart-repair dent puller set Suitable for repairing small dents or bumps No filling or painting work Allows the flexible removal of the dent and provides the best results Includes pneumatic dent puller With 0 different beating pads 40.0 pcs Professional slide hammer set 86 4.0066 Slide hammer 860 40.0 Self-adhesive sheets, round, flat, Ø 40 mm 5 40. Self-adhesive sheets, round, flat, Ø 35 mm 4 40.2 Self-adhesive sheets, round, flat, Ø 32 mm 4 40.3 Self-adhesive sheets, spherical, round, Ø mm 3 40.4 Self-adhesive sheets, spherical, round, Ø mm 3 40.5 Self-adhesive sheets, spherical, round, Ø 5 mm 2 40.6 Self-adhesive sheets, elliptical, flat, 48 x 33 mm 5 40.7 Self-adhesive sheets, elliptical, flat, 40 x 27 mm 4 40.8 Self-adhesive sheets, elliptical, flat, 33 x 22 mm 3 40. Self-adhesive sheets, rectangular, 32 x 7 mm 3 40.7 240.0 0.0 370 40. 2 pcs Pneumatic smart-repair dent puller set.48 52

Panel beater s serrated hammer, round/tip 2 40.22 Pneumatic hammering puller 440 40.0 Self-adhesive sheets, round, flat, Ø 40 mm 5 40. Self-adhesive sheets, round, flat, Ø 35 mm 4 40.2 Self-adhesive sheets, round, flat, Ø 32 mm 4 40.3 Self-adhesive sheets, spherical, round, Ø mm 3 40.4 Self-adhesive sheets, spherical, round, Ø mm 3 40.5 Self-adhesive sheets, spherical, round, Ø 5 mm 2 40.6 Self-adhesive sheets, elliptical, flat, 48 x 33 mm 5 40.83 Panel beating hammer with impact weight 2400 40.84 Suction disk Ø 75 mm 26 40.85 Suction disk Ø 00 mm 70 40.86 Suction disk Ø mm 260 40.87 Pull hook 00 Aluminium hammer For reworking repaired areas Stresses are removed from the plate using a special profile in the impact area For tightening with a round, rough serrated head Fine face curved for accurate hammering out 3 4 40.7 Self-adhesive sheets, elliptical, flat, 40 x 27 mm 4 40.8 Self-adhesive sheets, elliptical, flat, 33 x 22 mm 3 40. Self-adhesive sheets, rectangular, 32 x 7 mm 3 40. Extension adaptor 37 Self-adhesive sheets for hammering tools With hickory handle Aluminium head Protective material 5 6 Suitable for repairing small dents or bumps No filling or painting work Allows the flexible removal of the dent and provides the best results For use alongside a planishing tool 40. 280.0.0 40.0.0 460 7 8 Panel beaters hammer With ash handle Forged execution Impact area surfaces inductively hardened Head and edge areas polished ground Rounded edges Head coating made from structured powder baked lacquer Hammer head made out of high quality special steel 0 40.22 280 30.0 30.0 45.0 40.222 40.2 380 40.05 5 40.5 5 40. 5 40.35 5 40.45 5 40.55 5 40.65 5 40.75 5 40.85 5 40.5 5 Self-adhesive sheets, round, flat, Ø 40 mm, 5 pcs Self-adhesive sheets, round, flat, Ø 35 mm, 5 pcs Self-adhesive sheets, round, flat, Ø 32 mm, 5 pcs Self-adhesive sheets, spherical, round, Ø mm, 5 pcs Self-adhesive sheets, spherical, round, Ø mm, 5 pcs Self-adhesive sheets, spherical, round, Ø 5 mm, 5 pcs Self-adhesive sheets, elliptical, flat, 48 x 33 mm, 5 pcs Self-adhesive sheets, elliptical, flat, 40 x 22 mm, 5 pcs Self-adhesive sheets, elliptical, flat, 33 x 22 mm, 5 pcs Self-adhesive sheets, rectangular, 32 x 7 mm, 5 pcs. 5 5 0 5 5 Aluminium bodywork hammering set For hammering out aluminium car body panels Practical configuration For stretching and forming of aluminium car body sheet panels In durable plastic storage case 40.4003 400 30.0 30.0 8.0 40.5304 40.5404 560 2 3 4 5 Pneumatic vacuum dent puller set Ideal for processing bumps in bodywork A vacuum creates an underpressure and the suction disks stick to the bodywork allowing dents to be easily pulled out Pneumatic regulation via ball valve Includes 3 exchangeable suction discs and pull hook In durable plastic storage case Panel beaters hammer, small round/square Simple hammer with a flat, angular face and a round, slightly arched face Work areas ground 6 7 8 40.8 3.0 00.0 30.0 28 x 28 mm 30 Panel beaters standard hammer, large round/square Planishing hammer with a square and round, flat face Work areas ground 2 22 40.2475 7 pcs Aluminium bodywork hammering set 3.50 6-8 bar /4-6,3mm /4 40.2476 Aluminium bodywork recess heel dolly 86 40.2477 Aluminium bodywork comma heel dolly 350 40.2478 Aluminium bodywork universal heel dolly 24 Slide hammer weight:,2 kg Removal power: bis zu 00 Kg 40.80 5 pcs Pneumatic vacuum dent puller set 4.50 40.247 Aluminium bodywork toe heel dolly 265 Aluminium bodywork pick hammer curved 700.48 head, round/tip 0 Aluminium bodywork flat pick hammer 700.40 curved head, round/flat tip 40 Aluminium bodywork standard hammer 700.4 curved head, round/square 48 40.3 3.0 00.0 40.0 3 x 3 mm 4 26 53 i

Panel beaters serrated hammer fine, round/square For forming with an square, rough serrated face For streching with a round, slightly domed face Round work surfaces ground Aluminium bodywork pick hammer curved head, round/ tip For hammering out aluminium car body panels Planishing hammer with a round, slightly domed face Fine conical face for accurate hammering out Polished surface Aluminium Panel beaters pick hammer straight head, flat/pointed Planishing hammer with a round, slightly domed face Fine face curved for accurate hammering out Work areas ground 40. 3.0 00.0 40.0 38 x 38 mm 40 700.48 300.0 40.0 40.0 0 40. 3.0 40.0 40.0.0 460 Panel beaters serrated hammer, round/square For forming with an square, finely serrated face For streching with a round, slightly domed face Round work surfaces ground Panel beaters pick hammer straight head, round/pointed Planishing hammer with a round, slightly domed face Fine conical face for accurate hammering out Work areas ground Aluminium bodywork standard hammer curved head, round/square For hammering out aluminium car body panels Simple hammer with a flat, angular face and a round, slightly arched face Polished surface Aluminium 700.4 300.0 00.0 40.0 38 x 38 mm 48 40.2 3.0 00.0 40.0 38 x 38 mm 40 Panel beaters hammer, round/square Bumping hammer with strong arched faces Work areas ground 40.7 3.0 40.0 40.0 460 Aluminium bodywork flat pick hammer curved head, round/flat tip For hammering out aluminium car body panels Planishing hammer with a round, slightly domed face Fine face for accurate hammering out Polished surface Aluminium Panel beaters standard hammer curved head, large round/square Simple hammer with a flat, angular face and a round, slightly arched face Work areas ground 40.4 3.0 00.0 40.0 38 x 38 mm 40 40.0 3.0 05.0 30.0 26 x 26 mm 30 Panel beaters hammer rounded head, small round/square Simple hammer with a flat, angular face and a round, slightly arched face Work areas ground 700.40 300.0 40.0 40.0.0 40 Panel beaters pick hammer straigh head, round/flat point Planishing hammer with a round, slightly domed face Fine face for accurate hammering out Work areas ground Wing dinging hammer Ideal for hammering out the wings Extra heavy execution Fine face curved for accurate hammering out Safe and easy use Polished working surfaces With hickory handle 40.5 3.0 00.0 30.0 27 x 27 mm 30 40.6 3.0 40.0 40.0.0 460 40.246 380 2 30 x 38 mm 35.3 54

Bodywork serrated hammer Car body panel beating set Rubber hammer 2 For hammering out the bodywork area High-quality design Work area coarse For hammering out on the car body area High quality execution Includes clamping and simple tools DIN 528 With tapered ash inserted handle Hammer head made out of hard rubber With white rubber head 3 4 5 6 40.24 3.0 60.0 30 x 45 mm 330 Bodywork standard hammer, slightly curved 40.4 270 50.0 3.0 85.0 540 40.5 500 65.0 335.0 5.0 540 40.6 700 74.0 375.0 26.0 750 7 For hammering out the bodywork area High-quality design Work area ground and lightly arched Rubber hammer DIN 528 With ash handle Hammer head made out of hard rubber 8 0 40.2 3 pcs Car body panel beating set 2.04 40.2 3.0 60.0 30 x 45 mm 330 Bodywork standard hammer, sharply curved For hammering out the bodywork area High-quality design Work area ground and strongly arched 40.22 Car bodywork panel beating grid toe dolly 27mm 30 Panel beaters hammer, serrated hammer 40.2 large round/square 40 Panel beaters hammer, standard hammer 40.3 arched, round/square 4 Car body panel beating set For hammering out on the car body area Practical grouping together For stretching and forming of car body sheet panels In durable plastic storage case 40.522 300 54.0 300.0 85.0 40.5304 40.5404 360 40.5222 500 67.0 30.0 00.0 40.5305 40.5405 560 40.52 700 74.0 330.0.0 40.5306 40.5405 760 Rubber hammer DIN 528 With tapered ash inserted handle Hammer head made out of hard rubber 2 3 4 5 6 40. 3.0 60.0 30 x 45 mm 360 7 Bodywork dinging hammer set 8 For hammering out the car body High-quality design Optimum composition of rough and curved faces Polished working surfaces In durable plastic storage case 40.0 5 60.0 340.0 0.0 540 Rubber hammer DIN 528 With fiberglass handle Hammer head made out of hard rubber 2 22 40.0 7 pcs Car body panel beating set 7.50 40.20 3 pcs Bodywork dinging hammer set.02 40.24 Bodywork serrated hammer 330 40.2 Bodywork standard hammer, slightly curved 330 40. Bodywork standard hammer, sharply curved 360 40.24 Car bodywork-universal slapping dolly, 70 mm 380 Car bodywork-pointed slapping dolly,arched 40. and ground, 30 mm 630 40.26 Car bodywork-heel dolly,arched and ground, 60 mm 30 40.2 Car bodywork-toe dolly (large), mm 400 Panel beaters hammer, standard hammer 40.3 arched, round/square 4 Panel beaters-pick hammer straight head, 40.7 round/pointed, ground 3 mm 460 Panel beaters-serrated hammer fine head, 40. (round/square), ground, 3 mm 40 40.7 700 56.0 30.0 00.0 60 24 26 55 i

Recoil free soft faced hammer With hickory handle Shock absorbing effect through steel shot in the head Up to 00% higher impact effect than normal Soft head hammers Shatterproof and wear resistant Polyamid heads interchangeable For safer working with less recoil Plastic hammer With transparent heads made from impact resistant cellulose acetate Impact heads are exchangeable (screw thread) With ash handle Ideal for hammering out and gentle sheet metal working 3 in Heel dolly With a round form, a tip and anvil form Ideal for beating out bumps and dents With arched and ground work surfaces Polished surface Steel 40. 350 32.0 330.0.0 60 Recoil free soft faced hammer With steel tube handle and plastic handle Shock absorbing effect through steel shot in the head Up to 00% higher impact effect than normal Soft head hammers Shatterproof and wear resistant Polyamid heads interchangeable For safer working with less recoil 40.5 0 28.0 260.0 82.0 40.530 40.540 40.52 340 35.0 300.0 5.0 40.5304 40.5404 350 Recoil free soft faced hammer With polyurethane glass-fibre composite handle Serrated surface for secure grip Free of sparks due to rubber cover Special absorbing effect through steel shot balls in the hammer head Substantially higher blow effect than in conventional hammering For safer working 40.5 37.0 74.0 6.5 285 40.6 37.0 86.5 3.5 34 40.7 42.0 74.0 8.5 50 3 in Heel dolly set Each tool with x round form, x tip and x anvil form Ideal for beating out bumps and dents With arched and ground work surfaces Each form provided in different sizes For working in hard to access areas Steel 40.5270 360.0 270.0 05.0-40.5280-360 40.527 480 30.0.0 05.0-40.528-480 40.5272 50 35.0.0 0.0-40.5282-50 40.5273 850 40.0 300.0.0-40.5283-850 40.5274 0 45.0 305.0.0-40.5284-0 40.5275 0 50.0 30.0.0-40.5285-0 40.5276 55.0 3.0 35.0-40.5286-40.5277 670 60.0 335.0 40.0-40.5287-670 40.52 35.0 280.0 0.0 - - 400 40.54 30 45.0 300.0 0.0 - - 580 40.55 540 50.0 3.0 00.0 - - 75 40.56 70 55.0 355.0 0.0 - - 050 40.57 5 60.0 365.0.0 - - 270 40.58 0 65.5 375.0 30.0 - - 540 40.8 3 pcs 3 in Heel dolly set.37 Nylon hammer With impact heads made out of impact resistant nylon shatterproof, break and wear-resistant With ash handle Ideal for hammering out and gentle sheet metal working Recoil free soft faced hammer, extra large With polyurethane glass-fibre composite handle Rubber handle for better grip Special absorbing effect through steel shot balls in the hammer head Substantially higher blow effect than in conventional hammering For safer working 40.5 3 in heel dolly, 37 x 74 mm 285 40.6 3 in heel dolly, 37 x 86.5 mm 34 40.7 3 in heel dolly, 42 x 8.5 mm 50 Bodywork drip moulding spoon With blue lacquered handle Work areas ground and polished 40.52 0 28.0 260.0 82.0 40.530 40.540 0 40.522 340 35.0 300.0 5.0 40.5304 40.5404 450 40.5 4500 80.0 80.0 80.0 - - 4.76 40.5260 5000 05.0 00.0 0.0 - - 5.26 40. 240.0 45.0.07 56

Bodywork slapping spoon Dent tool, wide Bodywork grid toe dolly 2 With blue lacquered handle Work areas ground and polished Light execution Suitable for bodywork work Wide shape Robust design Arched work area For streching with grooved surface Grooved surface has red lacquer Polished surface 3 4 5 6 40.0 0.0 50.0 56.05.0 50.0 840 40.22.0 58.0.3 7 Dent tool Suitable for bodywork work Wide shape Robust design Dent tool, long Suitable for bodywork work Wide and long form Robust design Aluminium bodywork comma heel dolly For hammering out aluminium car body panels Upper areas arched and ground on all sides Universal usage Polished surface Aluminium 8 0 2 3 56.0507 4.0 60.0.82 Panel beating pry bar 56.052 30.0 55.0.26 Bodywork slapping heel dolly 40.2477 35.0 60.0 350 Bodywork curved heel dolly 4 Suitable for bodywork work Wide, cranked form Robust design With flat, arched and ground work areas Polished surface Upper areas on all sides arched and ground Polished surface 5 6 7 8 40. 30.0 5.0.63 56.0506 5.0 60.0 2.24 40. 05.0 60.0 670 Aluminium bodywork recess heel dolly Dent tool, narrow Suitable for bodywork work Narrow form Robust design Bodywork toe dolly, small With flat, arched and ground work areas Polished surface Narrow execution For hammering out aluminium car body panels Upper areas arched and ground on all sides Universal usage Polished surface Aluminium 2 22 24 56.05 270.0 30.0 6 40.2 5.0 55.0 60 40.2476 75.0 30.0 86 26 57 i

Bodywork heel dolly Upper areas on all sides arched and ground Bodywork dome dolly with handle With slightly arched and ground work areas Polished surface Bodywork double dolly In anvil form With arched and ground work surfaces Polished surface 40.26 60.0 80.0.3 40.28 60.0 80.0.47 40. 5.5 53.0.38 Bodywork ambos heel dolly Work areas arched and ground Polished surface Aluminium bodywork toe heel dolly For hammering out aluminium car body panels Upper areas arched and ground on all sides Universal usage Polished surface Aluminium Aluminium bodywork universal heel dolly For hammering out aluminium car body panels In hand fist form With arched and ground work surfaces Universal usage Polished surface Aluminium 40.27 30.0 65.0.0 3.66 Bodywork small anvil heel dolly Work areas arched and ground Polished surface 40.247 02.0 58.0 265 Bodywork toe dolly, large With flat, arched and ground work areas Polished surface 40.2478 70.0 65.0 Bodywork universal heel dolly In hand fist form With arched and ground work surfaces Universal usage Polished surface 40.3.0 54.0 750 Body work large anvil heel dolly Work areas arched and ground Polished surface 40.2.0 58.0.40 Bodywork outline dolly With flat, arched and ground work areas Polished surface 40.24 70.0 85.0.38 Bodywork anvil dolly Diabolo-shaped Polished surface 40.4.0. 40.2.0 58.0.63 40. 55,0 55.0 740 58

Bodywork anvil dolly wedge Round anvil Rubber guide wedge, small 2 Wedge-shaped Polished surface Ideal for aligning bodywork panels Stable tip Simple handling Robust design Extremely durable Special plastic Suitable for aligning bodywork panels Optimal resistance For narrow sites Robust design Special plastic 3 4 5 6 7 40.2.0 62.0 27.0 840 Fold alignment tool 40.264 65.0 75.0 40.0 400 8 Suitable for aligning bodywork panels Important registering tool Groove for lateral alignment Extremely durable Special plastic 40.246 80.0.60 Anvil dolly, flat and curved Rubber guide wedge, large Suitable for aligning bodywork panels Optimal resistance Robust design Special plastic 0 Suitable for aligning bodywork panels Ideal for counter-holding Robust design Extremely durable Special plastic 2 3 4 40.263 0.0 50.0 3 40.24 270.0 40.0 80 Edge alignment tool Suitable for aligning bodywork panels Used for aligning edges Robust design Extremely durable Special plastic 40.267.0 75.0 40.0 700 WING BRAKE PIPE FLARING Universal wing flange tool Ideal for expanding the wing Suitable for 4 and 5-hole wheel hubs Extremely gentle on paintwork Secure and easy to use 5 6 7 8 Handling tool, semi-circular Suitable for aligning bodywork panels Precise handling of profile panels Aligning curves Extremely durable Special plastic 40.24 280.0 00.0 0 Profile alignment block Suitable for aligning bodywork panels For angled contours For large areas Extremely durable Special plastic 2 22 24 40.242 280.0 0.0 2 40.244 360.0 60.0.28 40.6 440,0 50.0 260.0 6.88 26 5 i

BODYWORK FILES Bodywork file With a handle for safe one handed usage For flat applications Double sided blade Includes a blade Bodywork file blade holder With a handle and knob for safe two handed usage For semi-circular applications Suitable for file blade; semi-circular (hollow) Made out of wood HOLE, SETTING, AND SEAM PLIERS Seaming pliers For folding of sheet metal Straight design Insulated handle Cast iron 40.307 5.0.0 277 40.300 Single cut 40.0 35.0 40.303 640 40.30 Cross cut 40.0 35.0 40.304 640 40.302 3 Cross cut 40.0 35.0 40.305 640 Bodywork file blade DIN 7264 Form F Semi-circular (hollow) Semi-circular, radial toothing Suitable for bodywork file blade holder 40.307 Bodywork file blade holder With a handle and knob for safe two handed usage For flat applications Suitable for file blade; radial and helical toothing Made out of wood 6.00 350.0 30.0 0 Bodywork file, adjustable With a handle and knob for sfe two handed usage For flat and curved applications Double sided blade Includes one blade - radius 0 teeth Aluminium 222.60 280.0 52.0 660 Seaming pliers For folding of sheet metal 45 angled jaws Insulated handle Cast iron 40.306 5.0.0 350 Bodywork file blade DIN 7264 Form A sides Milled, helical toothing Suitable for bodywork file blade holder 40.306 222.602 260.0 52.0 670 6.007 350.0 35.0 0 6.008 2 350.0 35.0 0 6.00 3 350.0 35.0 0 40.300 350.0 34.0 40.30 40.302 770 Flexible sanding paper holder with rubber mat With quick clamping system for holding the sanding paper Rubber mat ensures a firm seating of the sanding paper Extremely flexible Adapts itself to the bodywork Ergonomic wooden handles Seaming pliers For folding of sheet metal 0 angled jaws Insulated handle Cast iron Bodywork file blade DIN 7264 Form A sides Milled, radial toothing Suitable for bodywork file blade holder 40.306 6.002 350.0 35.0 262 6.0022 2 350.0 35.0 262 40.30 400.0 70.0 440 222.603 260.0 52.0 760 60

Mini joggler pliers Self opening For the flanging of sheet metal and body parts Up to mm thickness Particularly suitable for thin sheet metal edges, curves and arches Requires light expenditure of energy Hardened flanging jaws Special tool steel Punched hole and joggler pliers Self opening Fast conversion by simply turning the head For the flanging and punching sheet metal and body parts Punching up to, mm thickness Hole diameter 5 mm Requires light expenditure of energy Special tool steel 2 3 4 5 6 8.0055 285.0 3.0 max. 5 mm. Pneumatic hole and joggler pliers Self-opening For the flanging and punching sheet metal and body parts Flanging and punching up to a maximum material thickness of.5 mm Hole diameter 5 mm Lower power usage Rubber handle Special tool steel 7 8 8.0056 2.0 3.0 00 Joggler pliers Self opening For the flanging of sheet metal and body parts Up to mm thickness Requires light expenditure of energy Hardened flanging jaws Special tool steel Punch pliers set Ideal for use in all sheet-metal processing areas Enormous punch force due to lever mechanism Work depth adjustable up to 47 mm 7 different punches with counter tool (2.38 mm-7.4 mm) Easy reconstruction PVC dipped handle Plier body from die-cast metal In durable plastic storage case 0 2 3 4 Rebate width: Rebate depth: 22 mm 2 mm 3 l/min 5 6,3 bar (0 psi) 3/8-0 mm /4 6 55. 0.0 55,0.30 7 8.0058 280.0 3.0.00 SHEET METAL NIBBLER AND SNIPS 8 Joggler pliers Self opening For punching straight and bent sheet metal Up to. mm thickness Radius to 40,0 mm Hole diameter 5 mm Requires light expenditure of energy Special tool steel 8.005 6 pcs Punch pliers set.33 Sheet steel nibbler Burr free cutting No deformation of the sheet metal Clean cut on the edges Easy locking action PVC dipped handle Cuts sheet metal up to.2 mmideal also for aluminum, copper and plastic Special tool steel 2 8.006 Joggler pliers 0 8.007 Punch, 2.38 mm 0 22 8.008 Punch, 3.8 mm 0 8.00 Punch, 3.7 mm 0 8.00 Punch, 4.76 mm 0 8.0 Punch, 5.56 mm 0 8.02 Punch, 6.35 mm 0 8.03 Punch, 7.4 mm 0 8.04 Counter holder, 2.38 mm 5 8.05 Counter holder, 3.8 mm 5 24 8.06 Counter holder, 3.7 mm 5 8.07 Counter holder, 4.76 mm 5 8.02 Counter holder, 5.56 mm 5 8.022 Counter holder, 6.35 mm 5 8.0057 300.0 max. 5 mm.00 8.0 Counter holder, 7.4 mm 5 8.026 Assembly tool 40.275,2 4.0 265.0 3,0 40.275-460 26 6 i

Pneumatic nibbler 0 offset execution Air exhaust through the handle rear end For one handed operation with ergonomic design Ideal for curved and straight cutting Cut is made by punching a series of holes sequentially in sheet metal Also suitable for plastic cutting For extremely small radius With stepless speed regulation Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic TIn snips, left handed cut Left handed cut With spring Induction-hardened precision cutting With PVC dipped handle Cuts steel sheet up to,2 mm, stainless steel up to 0,7 mm Special tool steel Pelican straight cut shears Right hand cutting Straight cut With spring Induction-hardened precision cutting With PVC dipped handle Cuts steel sheet up to.2 mm, stainless steel up to 0.7 mm Special tool steel 8.04,2 (0,7) 305.0 73,5 465 8.046,2 (0,7) 280.0 38,0 540 Punching shears Induction-hardened precision cutting With PVC dipped handle Cuts steel sheet up to.2 mm, stainless steel up to 0.7 mm Special tool steel Mini metal shears, straight cut Straight cut Optimal for fine working Self opening handle With internal spring With easy locking action Induction-hardened precision cutting Cuts sheet metal up to.2 mm Special tool steel Cutting speed: Cutting output: Cutting width: 2,6 m/min steel,2 mm Aluminium,6 mm 4,5 mm 330 Watt < 0,5 ms² 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 55.3050 00.0 0.0.5 Ideal shears Straight cut With spring Induction-hardened precision cutting With PVC dipped handle Cuts steel sheet up to.2 mm, stainless steel up to 0.7 mm Special tool steel 8.047,2 (0,7) 0.0 42 455 Punching scissors, left handed cut Left handed cut Induction-hardened precision cutting With PVC dipped handle Cuts steel sheet up to,2 mm, stainless steel up to 0,7 mm Special tool steel 8.052,2 0.0.0 80.0,0 300 Mini metal shears, right handed cut Right handed cut Optimal for fine working Self opening handle With internal spring With easy locking action Induction-hardened precision cutting Cuts sheet metal up to.2 mm Special tool steel 8.045,2 (0,7) 280.0 38,0 630 8.048,2 (0,7) 0.0 42 455 8.05,2 7.0 33.0 80.0,0 300 62

Mini metal shears, left handed cut Left handed cut Optimal for fine working Self opening handle With internal spring With easy locking action Induction-hardened precision cutting Cuts sheet metal up to.2 mm Special tool steel Tin snips sheet metal shear, self opening, right handed cut Right handed cut Self opening handle Serrated blades Internal spring Easy locking action Includes hanging loop Induction hardened precision cutting Two component handle Cuts steel sheet up to,2 mm, stainless steel up to 0,7 mm Special tool steel Template cutting shear with lever gearing, right handed cut Right handed cut Self opening handle Serrated blades With internal spring With easy locking action Includes hanging loop Induction hardened precision cutting Cuts steel sheet up to.5 mm, stainless steel up to.0 mm Special tool steel 2 3 4 5 6 7 8 8.053,2.0.0 80.0,0 300 8.0052,2 (0,7) 8.0 2.0 240.0 42,0 400 8.0045 right,5 (,0) 30.0 50.0 260.0 40,0 380 Mini straight and shape cutting snip set Self opening handle With internal spring With easy locking action % power savings Left, right hand cutting & straight Smooth blades Induction-hardened precision cutting Cuts sheet metal up to.2 mm Tin snips sheet metal shear, self opening, left handed cut Left handed cut Self opening handle Serrated blades Internal spring Easy locking action Includes hanging loop Induction hardened precision cutting Two component handle Cuts steel sheet up to,2 mm, stainless steel up to 0,7 mm Special tool steel Template cutting shear with lever gearing, left handed cut Left handed cut Self opening handle Serrated blades With internal spring With easy locking action Includes hanging loop Induction hardened precision cutting Cuts steel sheet up to.5 mm, stainless steel up to.0 mm Special tool steel 0 2 3 4 5 6 8.0053,2 (0,7) 7.0 26.0 240.0 44,0 400 8.0046 left,5 (,0) 30.0 50.0 260.0 40,0 380 7 8.050 3 pcs Mini straight and shape cutting snip set 800 Tin snips sheet metal shear, self opening, straight cut Straight cut Self opening handle Serrated blades Internal spring Easy locking action Includes hanging loop Induction hardened precision cutting Two component handle Cuts steel sheet up to,2 mm, stainless steel up to 0,7 mm Special tool steel Tin snips sheet metal shear set Self opening handle Serrated blades Internal spring Easy locking action Includes hanging loop Induction hardened precision cutting Two component handle Cuts steel sheet up to,2 mm, stainless steel up to 0,7 mm Special tool steel Manual guillotine shears Ideal for all straight and round cuts Cuts practically all materials up to.5 mm Easy cutting of external and internal radii, contours, curves, angles, etc. No deformation of the material Simple cutting of long, straight work pieces approx. 0 mm cutting lengths Self-sharpening due to special blade, no regrinding necessary Includes a mount for a workbench Application range: Steel, copper, aluminium, brass, stainless steel, etc. 8 2 22 24 8.005,2 (0,7).0.0 0.0 45,0 400 8.0050 3 pcs Tin snips sheet metal shear set. 8.044 0,0.5 4.50 26 63 i

Pneumatic sheet metal shear Air exhaust through the handle rear end For one handed operation with ergonomic design Ideal for the cutting of car body sheet metal and aluminium sheet Eccentric cutting drive For curved cutting up to 00 mm radius With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic Pneumatic reciprocating bodywork saw, low vibration Air exhaust through the used air tube to the rear For one handed operation with ergonomic design For works in car body panels, beams and profile Secure operation lever with locking device Suitable for small sawing radius Stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Robust metal housing LOCKING PLIERS Mini welding clamp set Ideal for preparing bodywork welding work Adjustable clamping range for various panel thicknesses Can be used in the narrowest of spaces, e.g. wheel arches, window apertures, engine compartment, etc. With tiltable clamp jaws Contact pressure adjustable via wing nut Span width 0 7 mm Allows for precise adjusting and positioning Cutting speed: 2,6 m/min Cutting output: Cutting width: steel,2 mm Aluminium,6 mm 5,0 mm <, ms² 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT Stroke: Cutting strokes: 0.0 mm 5760 strokes/min <, ms² 6.2 dba 8.0 dba 6 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 5.05 4 pcs Mini welding clamp set 35 X 5.06 4 Mini welding clamp 78 Micro grip pliers 55.3055 5.0 0.0 55.3055-40. PANEL SAWS SlimPOWER mini-pneumatic reciprocating bodywork key hole saw Air exhaust through the used air tube to the rear For one handed operation For works in car body panels, beams and profile Secure operation lever with locking device Suitable for small sawing radius Stepless speed regulation Vibration dampened Includes /4 coupling connector Robust metal housing 55.3000 45.0 70.0 2.3740-46 800 Jigsaw blades Flexible and shatter proof Suitable for: Non ferrous metal and stainless steel Steel sheet and car body panels Compression moulded material and formica Suitable for: Ober, KS, Pneutec, CP, KS 55.3000 und 55.30 Ideal for confined areas Straight linear design of the movable jaw With brass screw for fine adjustment With loosening lever One hand operation Aluminium alloy Stroke: 7. mm Cutting strokes: 5760 strokes/min 0 Watt < 6,4 ms² 2 dba 8.0 dba 240.66 l/min max. 5,5 bar (80 psi) 4,8 mm /4 55.5045 36.0 70.0 2.3740-46 500 2.3740 80 32,0 00.0 5 30 2.3742 60 24,0 00.0 5 30 2.3744 45 8,0 00.0 5 30 2.3746 35 4 2,0 00.0 5 30 Jigsaw blades Flexible and shatter proof Suitable for: Non ferrous metal and stainless steel Steel sheet and car body panels Compression moulded material and formica Suitable for: SIG und Flex 2.3750 80 32 0,7 00.0 5 2.3752 60 24,0 00.0 5 2.3754 45 8,4 00.0 5 2.3756 35 4,8 00.0 5 5.026 2.0 Locking pliers holder Alternative for a vice For light work For screwing onto workbenches, worktables etc. 5.72.0 84.0 24.3 300 64

Locking pliers Wide jaw locking pliers Locking pliers with quick-release lever, straight jaws 2 Forged gripping jaws Serrated execution With loosening lever With easy locking action For round and flat material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring Chrome vanadium Forged gripping jaws Serrated execution With loosening lever With easy locking action For round and flat material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring Forged gripping jaws Serrated execution With easy locking action For round and flat material To hold when welding With quick-release lever No flaring under the strongest loads Loosening under continuous pressure of a spring With dual component handle 3 4 5 6 7 8 5.03 0-50.0,3 80 5.032 0-55 75.0 24,0 340 5.033 0-60 0.0 27,5 5 5.506 0-64 0.0 50,0 600 Power locking pliers Forged gripping jaws Prevents slipping even at high forces Well thought through jaw teeth With loosening lever With easy locking action For round and flat material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring Chrome vanadium Wide jaw locking pliers with quick-release lever Forged gripping jaws Serrated execution With easy locking action For round and flat material To hold when welding With quick-release lever No flaring under the strongest loads Loosening under continuous pressure of a spring With dual component handle 5.30 0-40 75.0,0 400 5.302 0-50 0.0 30,0 600 Locking pliers, V jaws Forged gripping jaws Serrated execution With loosening lever With easy locking action For round and flat material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring 0 2 3 4 5 6 7 5.6 0-40 75.0 30,0 400 5.7 0-50 0.0 37,0 600 5.06 0-65 0.0 5,0 6 Locking pliers, straight jaws 5.5 0-85.0 24,0 400 5.52 0-32 2.0 27,5 600 8 Locking pliers with quick-release lever Forged gripping jaws Serrated execution With easy locking action For round and flat material To hold when welding With quick-release lever No flaring under the strongest loads Loosening under continuous pressure of a spring With dual component handle Forged gripping jaws Serrated execution With loosening lever With easy locking action For round and flat material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring Clamping pliers for pipes Forged gripping jaws With loosening lever With easy locking action With hexagonal nut for safe fastening For clamping pipes No flaring under the strongest loads Loosening under continuous pressure of a spring 2 22 24 5.3 0-30.0 2,0 300 5.32 0-40 75.0 27,0 30 5.33 0-55 0.0 30,0 600 5.50 0-28,5 75.0 27,0 370 5.502 0-45,5 0.0 30,0 600 5.504 0-30,5 75.0 2,5 360 26 65 i

Clamping pliers for pipes Forged gripping jaws Serrated execution With loosening lever With easy locking action For clamping pipes No flaring under the strongest loads Loosening under continuous pressure of a spring Long nose locking pliers Forged gripping jaws Serrated execution With loosening lever With easy locking action For round and flat material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring Wide jaw flat die locking pliers with quick-release lever Forged gripping jaws With easy locking action For clamping of flat or bended metal sheets With quick-release lever No flaring under the strongest loads Loosening under continuous pressure of a spring With dual component handle 5.505 0-86 280.0 8,0 500 Round jaw locking pliers with wire cutter For safe gripping of nuts and screw heads 3 level points prevents slipping and rounding With loosening lever With easy locking action Good adaptation to existing surfaces With wire cutting function No flaring under the strongest loads Loosening under continuous pressure of a spring 5.77 0-.0 35 0 5.034 0-35 50.0 45,0 80 5.035 0-45 2.0 65,0 340 Long-nose locking pliers with quick-release lever Forged gripping jaws Serrated execution With easy locking action For round and flat material To hold when welding With quick-release lever No flaring under the strongest loads Loosening under continuous pressure of a spring With dual component handle 5.76 0-40 45.0 5.0 80.0 600 5.77 0-55 45.0 0.0 80.0 800 Welding gripping pliers With malleable cast iron jaws Suitable for setting the welding points between the cut outs With loosening lever To hold and adjust sheets and profiles With easy locking action No flaring under the strongest loads Loosening under continuous pressure of a spring 5.75-75.0 370 5.76 6-27 2.0 700 Chain grip pliers For fastening and clamping of different profiles With loosening lever With easy locking action Ideal for confined spaces Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring 5.34 0-45 2.0 45,0 300 5.35 0-60 50.0 53,0 500 Wide and flat jaw locking pliers Forged gripping jaws With loosening lever With easy locking action For clamping of flat or bended metal sheets No flaring under the strongest loads Loosening under continuous pressure of a spring 5.078 0-45 70.0 2.0 600 5.07 0-55 70.0 280.0 780 Welding gripping pliers with quick-release lever With malleable cast iron jaws Suitable for setting the welding points between the cut outs To hold and adjust sheets and profiles With easy locking action With quick-release lever No flaring under the strongest loads Loosening under continuous pressure of a spring Chrome vanadium With dual component handle 5.7 50,0 2.0 5.72 755 5.076 0-53 0.0 40.0 5.0 480 5.077 0-57 00.0 45.0 245.0 650 5.78 0-45 70.0 270.0 70 5.7 0-65 70.0 0.0 875 66

Welding gripping pliers Welding gripping pliers, extra long Welding gripping pliers with movable clamping jaws 2 Forged semi-circular gripping jaws With loosening lever With easy locking action For profiled bulky components Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring Round forged gripping jaws With loosening lever With easy locking action For profiled bulky components Large clamping depth for front and rear panels Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring Flat gripping jaws Movable clamping jaws With quick-release lever With easy locking action For profiled bulky components Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring With dual component handle 3 4 5 6 7 8 5.070 0-35 40.0 70.0 240 5.0573 0-45.0 60.0.52 Welding clamp gripping pliers with quick-release lever 5.3 0-05 5.0 275.0 0.4 5.4 0-4 35.0 275.0.54 Welding gripping pliers, extra long Round forged gripping jaws Quick-release lever Easy locking action For profiled bulky components Large clamping depth for front and rear panels Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring Very good clamping capacity Round forged gripping jaws With quick-release lever With easy locking action For profiled bulky components Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring Chrome vanadium With dual component handle Welding gripping pliers For applications that need a straight jaw Jaws from special steel Easy locking action Quick-release lever Ideal for spot welding handle 0 2 3 4 5 6 5.08 0-45 45.0 275.0 300 5.0 0-0 85.0 50.0 00 7 5.080 0-56.0 5.0 548 5.072 0-27 0.0 450.0.8 Welding gripping pliers Very good clamping capacity Round forged gripping jaws Quick-release lever Easy locking action For profiled bulky components Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring Welding gripping pliers with movable clamping jaws Flat gripping jaws Movable clamping jaws Quick-release lever Easy locking action For profiled bulky components Good adaptation to existing surfaces No flaring under the strongest loads Loosening under continuous pressure of a spring Welding gripping pliers For applications that required double curved jaws Jaws from special steel Easy locking action Quick-release lever Ideal for fitting and mounting of body parts handle 8 2 22 24 5.78 0-.0.0 0.5 5.073 0-35 40.0 70.0 0.24 5.074 0-00 70.0 285.0 0.78 5.075 0-270 240.0 450.0. 5.0570 0-4 35.0 60.0.54 5.07 0-00 0.0 285.0 780 5.08 0-3.0 0.0 568 26 67 i

Welding gripping pliers For applications that required double curved jaws Jaws from special steel Easy locking action Quick-release lever For welding of the hole between the panels Also suitable for U-profile handle Welding gripping pliers set For applications that need a straight jaw Extra slim design Jaws from special steel With easy locking action With quick release lever For right angled terminals in the fold For difficult to access areas For welding of the hole between the panels Also suitable for U profile Ideal for spot welding handle Welding gripping pliers Flat gripping jaws Movable clamping jaws Serrated execution No sticking to the electrode Quick-release lever Easy locking action Good adaptation to existing surfaces Copper alloy clamping jaws No flaring under the strongest loads Loosening under continuous pressure of a spring handle 5.082 0-5 26.0.0 562 Welding gripping pliers For applications that need a angled jaw Jaws from special steel Easy locking action Quick-release lever Ideal for welding in the fold Also suitable for U-profile handle 5.80 0-70 85.0 240.0 500 Locking pliers, serrated Forged gripping jaws Serrated execution Quick release lever For round and flat material To hold when welding Chrome vanadium 5.085 5 pcs Welding gripping pliers set 2.60 5.083 0-30.0.0 50 5.080 Welding gripping plier, 5mm 548 5.08 Welding gripping plier, 0mm 568 5.082 Welding gripping plier, mm 562 5.083 Welding gripping plier, mm 50 5.084 Welding gripping plier, mm 488 Welding gripping pliers For applications that need a straight jaw Slim design Jaws from special steel Easy locking action Quick-release lever For right-angled terminals in the fold For difficult to access areas handle Automotive welding gripping pliers Forged gripping jaws Serrated execution Quick-release lever Easy locking action For flanged material To hold when welding No flaring under the strongest loads Loosening under continuous pressure of a spring 5.036 0-55 0.0 40,0 670 Locking pliers, serrated Forged gripping jaws Serrated execution Quick release lever For round and flat material To hold when welding Chrome vanadium 5.084 0-6 30.0.0 488 5.068 0-40 60.0 0.0 400 5.037 0-85 0.0 60,0 800 68

Locking pliers, serrated Automatic gripping pliers Standard hand riveting tool 2 Forged gripping jaws Movable clamping jaws Serrated execution Quick-release lever For round and flat material To hold when welding Chrome vanadium Flat gripping jaws Movable clamping jaws Automatic adjustment by cam mechanism Quick-release lever Heavy but controlled clamping For round and flat material For profiled bulky components Good adaptation to existing surfaces Knurled handle Suitable for blind rivets Including four interchangeable mouthpieces Magazine and key in the riveter body Narrow head pliers With safety lock on the handle end With rubber grip Die-cast metal body Blind rivets: 2,4-3,2-4,0-4,8 mm 3 4 5 6 7 8 5.038 0-85 0.0 60,0 800 Automatic locking pliers Forged gripping jaws Automatic adjustment by cam mechanism Serrated execution Quick-release lever For round and flat material Heavy but controlled clamping To hold when welding Knurled handle Chrome vanadium 5.65 0-68 55.0 75.0 330 5.70 0-0 0.0 275.0 860 BLIND RIVET TOOLS Plastic rivet pliers set included rivets Suitable for plastic rivets Narrow head pliers Can be used in hard to access areas 0 angled rivet head With rubber grip Includes 40 plastic rivets Die-cast metal body Plastic rivets: 5.0x5.8-5.0x7.2-6.3x.2-6.6x7.2 mm 50.50 2.0 270.0 Standard hand riveting tool set Suitable for blind rivets Four interchangeable mouthpieces Magazine and key in the riveter body Includes 0 blind rivets With rubber grip Die-cast metal body Blind rivets: 2,4-3,2-4,0-4,8 mm 0 2 3 4 5 6 7 5.50 0-32.0 22,0 0 5.55 0-47 0.0 2,0 6 50.5 5 pcs Standard hand riveting tool set. 8 Automatic long nosed locking pliers Forged gripping jaws Automatic adjustment by cam mechanism Serrated execution Quick-release lever Heavy but controlled clamping For round and flat material To hold when welding Knurled handle 50.650 4 pcs Plastic rivet pliers set included rivets 760 50.65 Plastic rivet pliers 580 Hand rivet tool Suitable for blind rivets 360 rotating head For difficult to access areas Narrow head pliers With safety lock on the handle end Including four interchangeable mouthpieces Die-cast metal body Blind rivets: 2,4-3,2-4,0-4,8 mm 2 50.652 Replacement rivets Pack of 0, 7,2 x 6,6 mm 50.653 Replacement rivets Pack of 0,,2 x 6,3 mm 22 50.654 Replacement rivets Pack of 0, 7,2 x 5 mm 5 22 50.655 Replacement rivets Pack of 0, 5,8 x 5 mm 6 24 5.60 0-5 75.0 55,0 260 50.540 2.0.0 70.0 75 26 6 i

Universal hand rivet tool with swivel head Suitable for blind rivets and blind rivet nuts 360 rotating head For hard-to-reach places Four interchangeable mouthpieces and nut rivet pulling inserts Die-cast metal body Blind rivets: 2.4mm-3.2mm-4.0mm-4.8 mm Rivet nuts: M3-M4-M5-M6 Long-arm hand riveter set for thread sleeves Suitable for thread sleeves Including four interchangeable mandrels and mouthpieces Extra-long lever arms High power transmission Suitable for aluminium, steel, and stainless steel sleeves With rubber grip Die-cast metal body Application range: for 5.0-6.0-8.0-0.0 mm thread sleeves 50.633 Universal riveter, 50 mm 600 Replacement rivet head for rivet tools, for 50.632 50.630 40 50.634 Rivet nut pulling spindle for riveting tools, M4 40 50.635 Rivet nut pulling spindle for riveting tools, M5 40 50.636 Rivet nut pulling spindle for riveting tools, M6 40 50.638 Rivet nut pulling spindle for riveting tools, M8 70 50.640 Rivet nut pulling spindle for riveting tools, M0 70 50.642 Combination spanner 8.5 + 5.5 mm, for 50.630 5 50.643 Combination spanner 7 + 2 mm, for 50.630 2 50.644 Combination spanner + 5 mm, for 50.630 35 5.26 Internal hexagon angled pin wrench, short, 6 mm 30 accessories: 50.6.0 500 Universal hand riveting tool set Suitable for blind rivets and blind rivet nuts 360 rotating head For difficult to access areas Four interchangeable mouthpieces and nut rivet pulling inserts Die-cast metal body Blind rivets: 2,4-3,2-4,0-4,8 mm Rivet nuts: M3 - M4 - M5 - M6 50.660 0 pcs Long-arm hand riveter set for thread sleeves.60 50.66 Long arm hand riveting tool 50.662 Threaded mandrel, M5 35 50.663 Mouthpiece, M5 32 50.664 Threaded mandrel, M6 36 50.665 Mouthpiece, M6 34 50.666 Thread arbour, M8 42 50.667 Mouthpiece, M8 33 50.668 Thread arbour, M0 32 50.66 Mouthpiece, M0 32 50.670 Wrench 0 mm for threaded mandrel 2 50.570 Rivet holders for rivetting tool small and large, 2,4 mm 0 50.57 Mouthpieces for riveting, 3.2 mm 0 50.572 Mouthpieces for riveting, 4.0 mm 0 50.573 Mouthpieces for riveting, 4.8 mm 0 50.574 Mouthpieces for riveting, 5 mm 0 50.575 Mouthpieces for riveting, 6.4 mm 0 50.578 Replacement jaw grips suitable for rivet head, suitable for 50.60 0 50.57 Replacement gripping jaws for rivet head, for 50.630 0 50.6 Cavity wall fixing rivet head, for 50.60 60 50.63 Rivet nut pulling spindle for small rivet tool, M3, suitable for 50.60 30 50.64 Rivet nut pulling spindle for riveting tools, M4 30 50.65 Rivet nut pulling spindle for riveting tools, M5 30 50.66 Rivet nut pulling spindle for riveting tools, M6 30 50.634 Rivet nut pulling spindle for riveting tools, M4 40 50.635 Rivet nut pulling spindle for riveting tools, M5 40 50.636 Rivet nut pulling spindle for riveting tools, M6 40 50.638 Rivet nut pulling spindle for riveting tools, M8 70 50.640 Rivet nut pulling spindle for riveting tools, M0 70 50.6 Spare rivet heads, suitable for 50.60 60 50.63 Replacement rivet heads for rivet tools, for 50.630 00 50.632 Replacement rivet heads for rivet tools, for 50.630 40 50.60 0 pcs Universal hand riveting tool set.6 Universal riveting tool Suitable for blind rivets and blind rivet nuts Retractable legs for increased power consumption Mouthpiece magazine intergrated in the handle Die cast metal body Blind rivets: 2,4-3,2-4,0-4,8-6,4 mm Pneumatic riveting tool pistol Air exhaust through the handle rear end For one handed operation with ergonomic design For pop rivet working With swivel joint at the coupling connector for flexible use Cold insulated Includes /4 coupling connector Robust aluminium housing 50.570 Mouthpieces for riveting, 2.4 mm 0 50.57 Mouthpieces for riveting, 3.2 mm 0 50.572 Mouthpieces for riveting, 4.0 mm 0 50.573 Mouthpieces for riveting, 4.8 mm 0 50.63 Rivet nut pulling spindle for riveting tools, M3 30 50.64 Rivet nut pulling spindle for riveting tools, M4 30 50.65 Rivet nut pulling spindle for riveting tools, M5 30 50.66 Rivet nut pulling spindle for riveting tools, M6 30 50.6 Hand rivet tool 360 rotating head 500 50.6 Rivet head for 50.60 60 50.633 30.0 50.0 45.0.60 Long arm hand riveting tool Suitable for blind rivets Including four interchangeable mouthpieces Extra long lever arms High power transmission Magazine and key in the riveter body With rubber grip Die-cast metal bodyblind rivets: 2,4-3,2-4,0-4,8 mm Universal riveting tool set Suitable for blind rivets and blind rivet nuts Retractable legs for increased power consumption Mouthpiece magazine intergrated in the handle Die-cast metal body Blind rivets: 2,4-3,2-4,0-4,8-6,4 mm Rivet nuts: M4 - M5 - M6 - M8 - M0 Rivet sizes: Stroke length: Driving power: 2,4-3,2-4,0-4,8 mm 4 mm 8677,5 N < 2,5 ms² 8.6 dba 85 dba l/hub max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 50.530 2.0 40.0 5.0.50 50.630 pcs Universal riveting tool set 2.67 55.302 5.0.0.50 70

Pneumatic riveting tool pistol Blind rivets assortment Threaded rivets assortment, steel 2 Air exhaust through the handle rear end For one handed operation with ergonomic design For professional riveting, continuous operation For steel, aluminium, stainless steel or copper riveting up to 6,4 mm With 6 mouth pieces, 4,8 mm is pre assembled Especially low noise level Swivel joint at the connection thread for flexible use Cold insulated Includes /4 coupling connector Robust aluminium housing Breakable pin made from steel In plastic storage case Steel threaded rivets In durable plastic storage case 3 4 5 6 7 Rivet sizes: Stroke length: Driving power: 3,2-4,0-4,8-6,4 mm mm 383,5 N < 2,5 ms² 85 dba 73.3 dba 70.050 400 pcs Blind rivets assortment 0 00 x 2,4 mm 00 x 3,2 mm 00 x 4,0 mm 00 x 4,8 mm 70.060 50 pcs Threaded rivets assortment, steel 460 x M3 x mm x M4 x mm x M5 x 3 mm 8 0,8 l/hub max. 6,3 bar (0 psi) 3/8-0 mm /4 PT Threaded rivets assortment, aluminium Aluminium threaded rivets In durable plastic storage case x M6 x 5 mm x M8 x 8 mm x M0 x 2 mm 2 55.30.0 340.0 2.00 Threaded rivets assortment, steel + aluminium Cordless riveting tool pistol Steel/aluminium threaded rivets In durable plastic storage case 3 Handy and ergonomic dual component housing Universal use for aluminium and steel rivets Ø 2.4/3.2/4.0/4.8 mm Approx. 2 rivets per battery With practical clockwise and anticlockwise reversing function Very short setup time Fast change of rivets Short processing time Stepless controllable motor speed through electronic switch 40% extended lifespan due to changeable special carbon brush conductors With lithium-ion high performance rechargeable battery Includes automatic turn off charging station Fast charging function ( hour) Blow mould plastic housing In durable plastic storage case 4 5 6 7 70.06 50 pcs Threaded rivets assortment, aluminium 2 x M3 x mm 8 x M4 x mm x M5 x 3 mm 70.0630 300 pcs Threaded rivets assortment, steel + aluminium 0.6 x M6 x 5 mm x M8 x 8 mm x M3 x mm x M4 x mm x M0 x 2 mm x M5 x 3 mm x M6 x 5 mm 2 Rivet sizes: 2,4 / 3,2 / 4,0 / 4,8 mm Stroke length: 5 mm 3,2 ms² 86, dba 75. dba Driving power: 4.00 0,8 V Rechargeable battery: 0,8 V -,5 Ah 55.404 5.0 55.0 0.0 55.355 55.352 0 0.5 55.405 5.0 55.0 0.0 55.355 55.352 2.6 55.406 5.0 55.0 0.0 55.355 55.352 2 3.07 x M8 x 8 mm x M0 x 2 mm x M3 x mm x M4 x mm x M5 x 3 mm x M6 x 5 mm x M8 x 8 mm x M0 x 2 mm 22 24 26 7 i

WELDING Electronic surge protection Constantly suppresses emerging voltage peaks to safe levels and therefore protects the vehicle power supply against overvoltages Prevents damage to the on-board electronics when charging the built-in battery or even during welding work Maximum load 0 A (8/ µs) With fuse protection Visibility and tone signal in the event of voltages peaks With reverse polarity protection The connection to the battery takes place via two plastic-coated crocodile pole clamps Sturdy workshop design Welding apron Made from leather Adjustable in length Size of the waist adjustable Breast pocket Welding coat Double leather closure, front With hook and loop fastener Adjustable cuffs Lined collar and with hook and loop fastener for additional protection Inner pocket 85.7000 L.80 85.700 XL.80 85.7002 XXL.82 85.7003 XXXL.82 50.3080 2 V 5 480 50.3045 2/24V 5 480 85.70 L 0.0 775 85.70 XL 080.0 775 Leather sleeves Dark brown Made from leather Ends with elastic band Welding leather gloves Made from leather Good, comfortable wear Can be used for applications with heat With open sleeves Welders protective helmet Turns fully automatically from bright after dark as soon as the light arch is ignited Due to high quality solar cells battery replacement is no longer require Equiped with a sensitivityand delaying switch for switching between dark and light to prevent welders blindness when welding at high amp capacity Quick switching is possible when changing from seam to spot welding Selection switch for reaction time Robust multi positional head band Complete neck protection Face protection to EN 75 / eye protection to EN37 /2/ 85.7034 M 365 85.7035 L 365 85.7036 XL 365 85.7037 XXL 365 85.702 400.0 2 3 Leather sleeves Light brown Made from leather Ends with elastic band Welding leather gloves, long Made from leather Extra long Good, comfortable wear Can be used for applications with heat With open sleeves Switching timed: /,000 s 0.6 s delay Window: 8 x 40 mm (3.7/8 x.5/8 ) Cassette size: 0 x 0 x mm (4.3/8 x 3./2 x 0,35 ) Power requirement: litium battery + solar cells UV / IR protection: according to EN6 / to DIN 6 Colour selection: varible adjustment from DIN -3 standard light adjustment DIN 3 (4) Working temperature: -5 to +55 C Storage temperature: - up tp +70 C 30.080 330.0 0.0 0.0 830 85.7022 400.0 2 335 85.7038 M 45 85.703 L 45 85.7040 XL 45 85.704 XXL 45 72

Frame for welding protection screen Super spotter - Welding gun 2V - 50/60 Hz 2 Very stable frame made from steel tubing With direct rolls With 360 swivel joint Handy workshop tool For the repair of bodywork damage For hammering out body panels Plastic housing Attention idle cut-out: 0 Ampere Attention light cut-out: 0 Ampere 500.855 Welding gun 2V, 50/60 Hz 5460 500.8554 Electrode for welding nails, Copper 0 500.8556 Electrode for rivets, magnetic, Copper 0 500.8557 Electrode for washers, Brass 0 500.8558 Heating electrode for hot spots, Brass 0 500.855 Slide hammer puller,5 kg 80 500.8560 Electrode extension, brass 0 Spotter-consumables, welding nails copper 500.857 caoted, 2.0 x 50 mm, pcs 500 660 Spotter consumables, copper plated, welding nails, 2,5 x 50 mm, pcs 00 500.8572 500.8574 Spotter-consumables, 3 x 3.2 mm, pcs 00 30 Spotter-consumables, screws copper 500.857 coated, M 4 x 6 mm, pcs 00 40 500.852 Washers 8.0 x 6.0 mm copper coated pcs 00 60 3 4 5 6 85.7026 780.0 780.0 4.50 Welding protection awning Super spotter addditional kit For removing of car body damage Includes the adaptor for the slide hammer puller The flexible and strong steel wire profile is used so the processing of securing car body panels The movable pull hooks situated can be pulled by the claw fastener straightening the carbody and/or the bump on It can be hooked on - pull hooks, at what point exact or extensive enabling the removal of dents 7 8 Resistant against UV rays, flames and wear Edges with eyelets at 30cm intervals Without frame 0 500.855 285.0 5.46 Slide hammer puller.5 kg For problem free hammerring out of car bodywork panels With.5 kg slide weight Usable in connection with the super spotter 500.8530 5 pcs Super spotter addditional kit.04 Welding-Electrode for corrugated wire for 500.853 Spotter 500.8550 500.8532 Corrugated wire Ø 2 mm x L=30 mm 0 pcs. 22 500.8533 Corrugated wire positioner magnetic 34 500.8534 Multi hook head with 6 claw connection IG M4x.5 35 System adaptor for slide hammer puller IG 500.8536 M4x,5, for use with 500.855 86 Spotter consumables, copper plated, welding nails, 2,5 x 50 mm, pcs 00 500.8572 2 3 4 5 500.855 475.0 80.0 500.856 2.08 85.7027 740.0 740.0.72 85.7028 740.0 740.0.72 85.702 740.0 740.0.72 Super spotter - Welding gun set Handy workshop tool For the repair of bodywork damage For hammering out body panels By means of special electrodes nails or washers are welded on the sheet metal so the dents can be removed with an impact hammer using accurate blows With a heat electrode placed hot points can be set on the sheet metal Also contains an electrode for welding copper-plated dome head screws for the reinforcement of housings, parts, etc. directly on the bodywork In durable plastic storage case Super spotter electrodes Usable in connection with the super spotter Copper and/or brass 6 7 8 Flame proof mats Asbestos free Reduced fire risk Very flexible Good formability Attention idle cut-out: Attention light cut-out: 0 Ampere 0 Ampere 2 22 24 500.8554 Electrode for welding nails, Copper 0 500.8556 Electrode for rivets, magnetic, Copper 0 500.8562 Electrode for screws, Copper 60.3350 330.0 500.0 700 330 500.8557 Electrode for washers, Brass 0 60.335 460.0 800.0 700 650 60.33 500.0 00.0 600 500.8550 Super spotter - Welding gun set 0.3 500.8558 Heating electrode for hot spots, Brass 0 500.8560 Electrode extension, brass 0 26 73 i

Super spotter consumables Usable in connection with the super spotter For the reinforcement of the car body Copper coated Pneumatic sand blaster Ideal for specific working With integrated storage tank 600 cm³ Suitable for blasting material grain size 46-00 Suitable for quartz sand, glass beads, plastic granulate, aluminium oxide, standard corundum and glass granulate Supply for blasting material can be switched off and therefore also be used as normal pneumatic guns ABS tank Robust steel handle Steel nozzle, maintenance-free Application range: Paint stripping, paint removal, rust removal, cleaning, surface cleaning SlimPOWER mini-pneumatic die grinder, straight Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in hard to access areas Very handy and compact construction Secure operation lever with locking device With stepless speed regulation Vibration dampened Very compact construction Includes /4 coupling connector Robust housing 500.8570 Welding nail, 00pcs, 2x50mm 40 500.857 Welding nail, 500pcs, 2x50mm 660 500.8572 Welding nail, 00pcs, 2.5x50mm 500.8573 Welding nail, 500pcs, 2.5x50mm 50 500.852 Washer, 00pcs, 8x6mm 60 500.855 Triangular-washer 2.5 x 50.0 mm copper coated 00pcs 500 500.8574 Rivet, 00pcs, 3x3.2mm 30 500.8575 Rivet, 00pcs, 3x4.5mm 40 500.8576 Rivet, 00pcs, 5x8.2mm 40 500.857 Screw, 00pcs, M4x6mm 40 SURFACE TREATMENT max. 6,3 bar (0 psi) 0 l/min 3/8-0 mm Chuck: 6 mm 0 Watt 000 r.p.m. <,5 ms² 5 dba 8 dba 3.3 l/min /4-6,4 mm max. 5,5 bar (80 psi) /4 PT /4 NPT Magnet protector set Suitable for protecting door edges and trims Ideal for polishing, painting and grinding Flexible use thanks to flexible magnetic film Surface made from rugged special plastic Easy to use 55.0 260.0 280.0 5,0.30 Pneumatic pencil grinder, 70.000 rpm Straight design Air exhaust through the used air tube Ideal for carbide, corundum and tungsten carbide burrs For working in hard to access areas Very handy and compact construction Suitable for different repair works With stepless speed regulation Vibration dampened Cold insulated handle Includes /4 coupling connector and chuck wrench Aluminium housing 55.5030 35.0.0 300 Mini pneumatic die grinder, straight Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in hard to access areas Very handy and compact construction Secure operation lever with locking device With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic Tube length: m 03.040 2 pcs Magnet protector set 3 Tube diameter: Chuck capacity: 5 mm 3 mm 50 KW 70000 r.p.m. < 2,5 ms² 86 dba 74 dba 40 l/min max. 6,3 bar (0 psi) /4-6,35 mm /4 PT Chuck: 6 mm 0 Watt 000 r.p.m. < 0, ms² 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 03.04 Magnet protector, small, mm 5 03.042 Magnet protector, large, 50 mm 80 55.38 6.0 32.0 330 55.3005 365.0 55.0 74

Pneumatic die grinder Long shaft die grinder set SlimPOWER mini-pneumatic angled die grinder 2 Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in hard to access areas Very handy and compact construction Secure operation lever with locking device Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic With mini grinding wheels and mounting mandrel Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grindstone with 6 mm shaft Ideal for grinding, polishing and engraving work For working in deep lying areas Secure operation lever with locking device With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Vibration dampened Very compact construction Includes /4 coupling connector Robust housing 3 4 5 6 7 8 Chuck: 6 mm 0 330 Watt 00 r.p.m. < 0, ms² 5 dba Chuck: 6 mm 0 Watt 000 r.p.m. 82 dba <,5 ms² 85 l/min 6,3 bar (0 psi) 3/8-0 mm 5 dba 82 dba 240.66 l/min 2 /4 PT 55.300 44.0 75.0 Long shaft die grinder Chuck: 6 mm 330 Watt 200 r.p.m. < 0, ms² /4-4,8 mm max. 5,5 bar (80 psi) /4 55.5035 75.0.0 300 3 4 Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in deep lying areas Secure operation lever with locking device With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 55.306 26.5 280.0. SlimPOWER mini-pneumatic angled die grinder Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Vibration dampened Includes /4 coupling connector Robust housing 5 6 7 8 55.305 Long shaft die grinder, 22,000 r.p.m..08 337.05 High performances thin disk,mm,pack of 0.0 55.307 Clamping mandrel M6 f. thin cutting disk 0.07 2 Chuck: 6 mm 330 Watt 200 r.p.m. < 0, ms² 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT Chuck: 6 mm 0 Watt 000 r.p.m. <,5 ms² 5 dba 83 dba 3.3 l/min /4-6,4 mm max. 6,3 bar (0 psi) /4 22 24 55.305 26.5 280.0.08 55.5040 70.0 270.0 700 26 75 i

Pneumatic angled die grinder 0 offset execution Air exhaust through the handle rear end For one handed operation with ergonomic design For HM mills, mini cutting discs and grinding heads with a 6 mm shaft Ideal for grinding, polishing and engraving work For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic Grease nipple for maintenance on striking mechanism ensures long life (KS grease gun 80.070) Grinding disc With Velcro receiver With internal thread receiver 55.50 46,0 flexible 5 275 55.502 75,0 flexible 5 55.503 46,0 rigid 5 55 55.52 /4 mini burnishing machine 000 55.522 Burnishing pads yellow, Ø 85,0mm 55 55.5 Burnishing pads weiß, Ø 85,0mm 55 55.524 Burnishing pads, Ø 80,0mm 80 55.52 Grinding disc Ø76.5 mm Grinding disc With Velcro receiver With external thread receiver Angle size: Chuck: 80 mm 6 mm 330 Watt 8000 r.p.m. < 0, ms² 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 55.30 80.0 80.0 SlimPOWER mini-pneumatic burnisher Our wide range of tube/sheet drills and taper/deburring countersinkers can be found on pages 50 to 5 of our Hand Tools catalogue. 0 offset execution Air exhaust through the handle rear end For one hand operation Ideal for curved cutting For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Vibration dampened Very compact construction Receiver: External thread Includes 3 Velcro receivers Includes /4 coupling connector Robust housing Burnishing pads For burnishing of smooth surfaces 55.526 50,0 plastic yellow 5 0 55.522 85,0 plastic yellow 5 55 55.527 50,0 plastic white 5 0 55.5 85,0 plastic white 5 55 55.528 50,0 plastic black 5 0 55.52 50,0 leather 5 48 55.524 80,0 leather 5 80 Mini pneumatic burnisher set For hard to reach places and improvement work With non-slip soft-grip-handle 0 offset execution Air exhaust through the handle rear end For one hand operation Ideal for curved cutting For working in hard to access areas Vibration dampened Very compact construction Grinding disc with Velcro Includes /4 coupling connector Receiver: Internal thread Robust housing In durable plastic storage case 55.53 46,0 flexible 5 3 55.52 76,5 flexible 5 Burnishing pads For burnishing of smooth surfaces 55.526 50,0 plastic yellow 5 0 55.522 85,0 plastic yellow 5 55 55.527 50,0 plastic white 5 0 55.5 85,0 plastic white 5 55 55.528 50,0 plastic black 5 0 55.52 50,0 leather 5 48 55.524 80,0 leather 5 80 SlimPOWER mini-pneumatic grinding machine 0 offset execution Air exhaust through the handle rear end For one hand operation Ideal for curved cutting For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Vibration dampened Very compact construction Includes /4 coupling connector Receiver: External thread Robust housing Incl. three grinding discs 0 Watt 4000 r.p.m. Sponge diameter: 50 + 75 mm Polishing sponge diameter: 46 mm,5 ms² 5 dba 8 dba 240.66 l/min /4-4,8 mm max. 5,5 bar (80 psi) /4 00 r.p.m.,5 ms² 2 dba 8 dba 3 l/min max. 5,2 0 mm /4 0 Watt 6500 r.p.m. Sponge diameter: 50 + 75 mm Polishing sponge diameter: 46 mm <,5 ms² 5 dba 8 dba 240.66 l/min /4-4,8 mm max. 5,5 bar (80 psi) /4 55.5 55.0 40.0 600 55.5 5 pcs Mini pneumatic burnisher set.6 55.500 40.0.0 300 76

Grinding disc Grinding pads 26.7 mm Belt sander 2 With Velcro receiver With internal thread receiver For polishing rough surfaces made from wood, metal, varnish and natural stone For breaking edges With external thread receiver With non slip soft grip handle Air exhaust through the handle rear end Working head is 360 ajustable Adjustable for quick sanding belt change Ideal for narrow areas (0 mm belt width) Secure operation lever with locking device With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Light aluminium housing 3 4 5 6 55.507 26,7 60 brown 0 0 55.50 46,0 flexible 5 275 55.502 75,0 flexible 5 55.503 46,0 rigid 5 55 55.5072 26,7 80 brown 0 55.5073 26,7 50 purple 0 55.5074 26,7 300 blue 0 55.5075 Strip Rad 26,7 black 0 7 Grinding pads For polishing rough surfaces made from wood, metal, varnish and natural stone For breaking edges SlimPOWER mini-pneumatic grinding machine for large pads 0 offset execution Air exhaust through the handle rear end For one hand operation Ideal for curved cutting For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Vibration dampened Very compact construction For screw in pads with 50.0 mm diameter Includes /4 coupling connector Receiver: Internal thread Robust housing Belt speed: 88 m/min 8000 r.p.m. < 2,0 ms² 8 dba 73 dba 42 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 55.354 50.0 70.0 800 8 0 Sanding belt for belt sander 2 55.5 50,0 3 0 6 55.56 75,0 3 0 Sanding belt for belt sander 55.354 3 55.58 50,0 400 0 6 55.55 75,0 400 0 55.57 50,0 600 0 6 55.54 75,0 600 0 SlimPOWER mini-pneumatic grinding machine for small pads 0 offset execution Air exhaust through the handle rear end For one hand operation Ideal for curved cutting For working in hard to access areas Secure operation lever with locking device With stepless speed regulation Vibration dampened Very compact construction For screw in pads with 26.7 mm diameter Includes /4 coupling connector Receiver: Internal thread Robust housing 6500 r.p.m. <,5 ms² 2 dba 8 dba 240.66 l/min /4-4,8 mm max. 5,5 bar (80 psi) /4 55.5080 70.0.0 300 55.355 80 0 60 55.3552 00 0 80 55.3553 0 00 Pneumatic disc cutter Air exhaust through the handle rear end For grinding wheels up to Ø mm x 22 mm With safety cover For grinding metal sheet and steel Secure operation lever with locking device With detachable second handle With stepless speed regulation Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic 4 5 6 7 8 Grinding pads 50.0 mm For polishing rough surfaces made from wood, metal, varnish and natural stone For breaking edges With external thread receiver 2 6500 r.p.m. <,5 ms² Tool holder: 5/8 - Gang 0000 r.p.m. 700 Watt < 0,2 ms² 22 2 dba 8 dba 240.66 l/min /4-4,8 mm max. 5,5 bar (80 psi) /4 55.508 Scouring wool 50,0 white 0 60 55.5083 Sand paper 50,0 80 brown 0 60 55.5084 Sand paper 50,0 50 purple 0 60 55.5082 Sand paper 50,0 240 brown 0 30 03 dba 0 dba 42 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 24 55.5085 Sand paper 50,0 300 blue 0 60 55.5070 65.0.0 300 55.5086 Strip Rad 50,0 purple 0 00 55.5087 Strip Rad 50,0 black 0 00 55.3045 5.0.0.75 26 77 i

Pneumatic disc cutter Air exhaust through the handle rear end For one handed operation with ergonomic design For cutting wheels up to Ø 75 mm x 0 mm With safety cover For cutting metal sheet and steel Secure operation lever with locking device For working in inaccessible places With stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic 55.5 Mini random orbital sander 700 55.5 Grinding pads, grit 3 Ø 50mm, 0 pcs 6 55.58 Grinding pads, grit 400 Ø 50mm, 0 pcs 6 55.57 Grinding pads, grit 600 Ø 50mm, 0 pcs 6 55.56 Grinding pads, grit 3 Ø 75mm, 0 pcs 55.55 Grinding pads, grit 400 Ø 75mm, 0 pcs 55.54 Grinding pads, grit 600 Ø 75mm, 0 pcs 55.53 Grinding disc Ø 46.0 mm 3 55.52 Grinding disc Ø76.5 mm Rapid removal eccentric sander with dust extraction Air exhaust through the used air tube With ergonomic design for fatigue free working Compact construction height and light composite housing for controlled working For sanding or polishing Alternatively can be used with dust bag or industrial vacuum cleaner Includes fabric dust collection bag With 6 punched hole in pitch circle: 80 mm / Ø mm With stepless speed regulation Low vibration Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic Grinding disc With Velcro receiver With external thread receiver Sanding radius: 5 mm Velcro disc receiver: Ø 52,4 mm = 6" Tube length: 2 m 240 Watt Tool holder: 5/6-24 mm 00 r.p.m. 330 Watt < 0,2 ms² 5 dba 82 dba 85 l/min max. 6,3 bar (0 psi) 55.53 46,0 flexible 5 3 55.52 76,5 flexible 5 Grinding pads For polishing rough surfaces made from wood, metal, varnish and natural stone For breaking edges 0000 r.p.m. 3,5 ms² 7 dba 60 dba 2 l/min max. 6,3 bar (0 psi) /4-6,35 mm /4 PT 3/8-0 mm /4 PT 55.3066 50.0 00.0 00 55.3040 80.0 5.0.00 Mini pneumatic random orbital sander set For hard to reach places and improvement work With non-slip soft-grip-handle 0 offset execution Air exhaust through the handle rear end For one hand operation Ideal for curved cutting For working in hard to access areas Vibration dampened Very compact construction Includes ¼ coupling connector Receiver: Internal thread Robust housing Grinding disc with Velcro In durable plastic storage case 55.5 50,0 3 0 6 55.56 75,0 3 0 55.58 50,0 400 0 6 55.55 75,0 400 0 55.57 50,0 600 0 6 55.54 75,0 600 0 Fine finish eccentric sander with dust extraction Air exhaust through the used air tube With ergonomic design for fatigue free working Compact constuction height and light composite housing for controlled working For sanding or polishing Alternatively can be used with dust bag or industrial vacuum cleaner Includes fabric dust collection bag With 6 punched hole in pitch circle: 80 mm / Ø mm With stepless speed regulation Low vibration Cold insulated handle Includes /4 coupling connector Ultra light robust housing special plastic Pneumatic multi-grinder set For removing underbody coating, sealant, rust, corrosion, clingages, paints, films, text as well as for paint stripping With non-slip soft-grip-handle For hard to reach places Air exhaust through the handle rear end Easy operation Ideal for grinding and erasing work For working in hard to access areas Vibration dampened Includes /4 coupling connector Robust housing In durable plastic storage case 5000 r.p.m. <,5 ms² 2 dba 8 dba 3 l/min max. 5,2 0 mm /4 Sanding radius: 2,5 mm Velcro disc receiver: Ø 52,4 mm = 6" Tube length: 2 m 240 Watt 0000 r.p.m. 3,5 ms² 7 dba 60 dba 5 l/min max. 6,3 bar (0 psi) /4-6,35 mm /4 PT 3500 r.p.m. < 4,4 ms² 4 dba 88 dba 3 l/min 6,2 /4-6,3 mm /4 55.50 63 pcs Mini pneumatic random orbital sander set.45 55.306 50.0 00.0 00 55.530 7 pcs Pneumatic multi-grinder set 4.67 78

Soldering wood set STAINLESS STEEL scraper 2 55.53 Mini multi-grinder with handle, 272 mm 400 Film eraser, light execution, 05mm, pack 55.532 of 5 3 Film eraser, dark execution, 05mm, pack 55.533 of 5 400 55.534 Adaptor for film eraser, pack of 5 00 Brushing belt, coarse, curved tips, mm, 55.535 pack of 5 0 Brushing belt, coarse, curved tips, mm, 55.536 pack of 5 375 55.537 Brushing belt, straight tips, mm, pack of 5 3 55.538 Brushing belt, straight tips, mm, pack of 5 350 Suitable for working hot-tinned surfaces Comprehensive set with various soldering woods Beech wood With wooden handle Ground Polished With hanging hole Suitable for use at extremely low temperatures Extreme resistance to intergranular corrosion and oxidation Extremely long service life Autoclavable (heating of the tools to over 00 C to kill germs) Rust-proof and acid resistant Stainless steel 3 4 5 55.53 Eliminator disc 5 mm, pack of 5 500 55.566 Adaptor for mm Ø brushing belt, pack of 5 80 Adaptor for individual eliminator disc, 55.567 mm, pack of 5 550 Adaptor for double eliminator disc, 3 mm, 55.568 pack of 5 650 6 7 Pneumatic erasing machine Straight design Air exhaust through the handle rear end For one handed operation with ergonomic design Ideal for removing of stickers glue and color remainders Includes neutral colored rubber eraser disc Stepless speed regulation Number of revolutions adjustable through regulating screw Vibration dampened Cold insulated handle Includes /4 coupling connector Ultra light robust housing from special plastic 03.00 5 pcs Soldering wood set 460 03.0 Soldering wood chock, 80 x 53 x 34 mm 03.02 Soldering wood chock, 58 x 40 x 50 mm 03.03 Soldering wood chock, 30 x 4 x 40 mm 80 03.06 Soldering wood block, 2 x 30 x mm 40 03.07 Soldering wood block, 2 x 47 x mm 60 Stainless steel spatula with short handle Ground Polished With suspension hole Extremely long service life Rust-proof Stainless steel 07.226 2.0.0 70 07.2262 2.0 38.0 70 07.2263 2.0 50.0 70 07.2264 2.0 63.0 70 07.2265 2.0 75.0 80 Sanding block with sponge rubber backing Accepts emery and sandpaper etc Moulded handle ensures a comfortable grip Ideally suited for working on surfaces Clamping clips made from stainless steel Special plastic 8 0 2 3 Tool holder: 5/6-24 4 330 Watt 2600 r.p.m. < 0, ms² 5 dba 55.305.0 05.0 330 5 82 dba 85 l/min max. 6,3 bar (0 psi) 3/8-0 mm /4 PT 55.244 40.0 2.0 55.243.08 Rubber eraser disc 44.063 50.0 00.0 Grinding hand block set Ideal for grinding and polishing For affixing sandpaper, etc. by hook and loop fastener Ideally suited to working on level surfaces With ergonomic design for fatigue-free working Low height With dust suction in combination with an industrial vacuum cleaner With non-slip soft touch handle Ultra-light robust housing from special plastic 6 7 8 For removing of stickers, glue and color remainders on varnished areas Includes neutral colored rubber eraser preventing a smearing on the surface Not suitable for pneumatic die grinders 44.0632 75.0 3.0 30 44.0633 00.0 6.0 50 44.0634 50.0.0 85 Stainless steel scraper Ground Polished Stainless steel 2 22 Speed: Shaft: 4000 rpm M8 44.0622 2.0 30.0 72 44.0624 2.0 40.0 73 40.3065 3 pcs Grinding hand block set 60 24 55.243 5.0 0.0 0 55.285 5.0 0.0 6 660 44.06 2.0 50.0 75 44.0626 2.0 60.0 84 44.0628 2.0 80.0 85 40.3066 Grinding hand block, small, 70 x mm 80 40.3067 Grinding hand block, medium, 0 x 75 mm 40.3068 Grinding hand block, large, 5 x 2 mm 26 7 i

INTERNAL CLEANING Plasma air-cleaner with ionisator technology Eliminates odours and disinfects the interior of the vehicle Compact, lightweight, and high ozone emission For use in closed passenger compartments In odour elimination mode, it switches off automatically after 60 minutes In disinfection mode, it automatically switches off after 30 minutes and immediately switches to odour elimination mode for 30 minutes Works without chemical additives, guaranteed to leave no residue It leaves no traces, even on sensitive surfaces Removes mould, bacteria, fungus and mites Includes an active carbon HEPA technology replacement filter Simple operation HURRICANE pneumatic cleaning guns Ideal for professional cleaning of cushions, door pillars, ventilation channels, carpets, foot mats, fabric seats, etc. Pneumatic-operated with simple handling Unique, cyclonic, ball bearing mounted rotation cleaning technology Efficient and energy-saving using targeted air turbulence For all possible surfaces, cleaned damp or dry Also suitable for hard-to-reach places, e.g. between seats and seams Cleaned surfaces also dry extremely quickly thanks for the fine misted cleaning solution With pressure regulator Includes 360 rotating and 30 angled ball joint and plug nipple WIRE BRUSHES Steel hand wire brush 3 rowed 3 rowed Universal use Handle made out of wood For surface preparation With steel bristles.05 32.0.0 38.0 Steel hand wire brush 4 rowed 4 rowed Universal use Handle made out of wood For surface preparation With steel bristles Dimensions: 73x22x4 mm Battery type: Lithium-ion Rechargeable battery: <850 ma/h Operational voltage: DC 2-24V / AC 00-240V / 50/60 Hz Power consumption: 5 Ozone transformation: 5 mg/h Negative Ion concentration: 3000 pcs/cm² Covering scope: 5m² 550.83 550. 360 Compressed-air cleaning guns Ideal for spraying cleaning fluids or oils With integrated storage tank 750 cm³ Simple handling Robust design Coated metal Application range: Waxing, sealing, impregnating, spraying cold cleaners in or on to surfaces, washing agents, antirust agents, spray oils, etc. 8000 r.p.m. 0,64 ms² 0 dba 0 dba 60 l/min max. 6,3 bar (0 psi) 3/8-0,0 mm /4 PT 55.80 000 ml 755 Cleaning Brush-Adaptor Ideal addition for cleaning the interior Can be used in conjunction with HURRICANE compressed-air cleaning guns (55.80) With screw connection Plastic housing. 32.0.0 38.0 Stainless steel hand wire hand brush 3 rowed 3 rowed Universal use Handle made out of wood For surface preparation With stainless steel bristles.0 32.0.0 38.0 /4 max. 6,3 bar (0 psi) 70 l/min 3/8-0 mm 55.83 Cleaning Brush-Adaptor 27 Cleaning Brush Ideal addition for cleaning the interior Can be used in conjunction with HURRICANE compressed-air cleaning guns (55.80) With suspension hole Plastic housing Stainless steel hand wire hand brush 4 rowed 4 rowed Universal use Handle made out of wood For surface preparation With stainless steel bristles 55. 30.0 0.0 4,5 500 55.86 Cleaning Brush 60.06 32.0.0 38.0 00 80

Brass wire hand brush 3 rowed Rust free steel jar brush 0,3 mm Steel wire jar brush 0,5 mm 2 3 rowed Universal usage Plastic hand grip casing For surface preparation Straight brass wire With 6 mm mandril To enable with high rotary speed Long durability through compact border For use with drill machine For surface preparation Curled and rust free steel wire Braided design With thread arbor For use in one hand angle grinder Ideal for heavy brush works For surface preparation Crimped steel wire 3 4 5 6 7 8.26.0 285.0 30.0 05 mm Steel wire hand brush 4 rowed 4 rowed Universal usage Plastic hand grip casing For surface preparation Straight steel wire 340.00 8000 0.0 38.0 6.0.0 55.0 50 340.002 0500 0.0 50.0 6.0.0 70.0 60 340.003 4500 0.0 63.0 6.0.0 88.0 70 340.004 4500 5.0 75.0 6.0.0 05.0 80 340.005 4500 5.0 80.0 6.0.0 2.0 0 Steel wire brush 0,3 mm With 6 mm mandril For use with drill machine For difficult to access areas For surface preparation Crimped steel wire 340.0022 00 M4 x 2,0 65.0.0 55.0 8 60 340.00 500 M4 x 2,0 80.0 22.0 68.0 0 340.0024 500 M4 x 2,0 0.0 22.0 77.0 240 Rust free stainless steel wire jar brush 0,5 mm Braided design With thread arbor For use in one hand angle grinder Ideal for heavy brush works For surface preparation Curled and rust free steel wire 0 2 3 4 5..0 285.0 30.0 Steel wire jar brush 0,3 mm 6 With 6 mm mandril To enable with high rotary speed Long durability through compact border For use with drill machine For surface preparation Crimped steel wire 340.006 000 7.0 6.0 22.0 65.0 30 340.007 8000.0 6.0.0 68.0 40 340.008 8000 30.0 6.0.0 68.0 50 mm 340.00 00 M4 x 2,0 65.0.0 55.0 8 60 340.0026 500 M4 x 2,0 80.0 22.0 68.0 0 340.0027 500 M4 x 2,0 0.0 22.0 77.0 240 Steel wire brush disc 0,3 mm 7 8 Paint brush steel wire brush 0,5 mm With 6 mm mandril For use with drill machine For difficult to access areas For surface preparation Crimped steel wire With 6 mm mandril Especially longlife industry version For use with drill machine For surface preparation Curled steel wire 2 22 24 340.000 8000 0.0 38.0 6.0.0 55.0 50 340.0002 0500 0.0 50.0 6.0.0 70.0 60 340.0003 4500 0.0 63.0 6.0.0 88.0 70 340.0004 4500 5.0 75.0 6.0.0 05.0 80 340.0005 4500 5.0 80.0 6.0.0 2.0 0 340.00 000 7.0 6.0 22.0 65.0 30 340.00 8000.0 6.0.0 68.0 40 340.002 8000 30.0 6.0.0 68.0 40 340.0028 000.0 30.0 6.0 6.0 45.0 40 340.002 5000 4.0 50.0 6.0 2.0 45.0 40 340.0030 5000 4.0 60.0 6.0 7.0 45.0 60 340.003 5000 6.0 70.0 6.0.0 45.0 80 340.0032 5000 8.0 80.0 6.0.0 45.0 00 26 8 i

Rust free steel wire brush disc 0,3 mm With 6 mm mandril Especially longlife industry version For use with drill machine For surface preparation Curled and rust free steel wire Steel wire circular brush 0,5 mm Braided design With 22,2 mm bore reception Longlife industry version For use in one hand angle grinder For removing of rubber, grate and lacquer residue For surface preparation Flat steel wire Rust free cone design steel wire circular brush 0,5 mm Braided design With thread arbor Especially longlife industry version For use in one hand angle grinder For hard to reach places For surface preparation Flat and grate free steel wire mm 340.0050 00 M 4 x 2,0 2.0 00.0.0 8 0 340.005 5000 M 4 x 2,0 2.0 5.0 24.0 340.0033 000.0 30.0 6.0 6.0 45.0 40 340.0034 5000 4.0 50.0 6.0 2.0 45.0 40 340.0035 5000 4.0 60.0 6.0 7.0 45.0 60 340.0036 5000 6.0 70.0 6.0.0 45.0 80 340.0037 5000 8.0 80.0 6.0.0 45.0 00 Steel wire circular brush 0,3 mm Braided design With 2 mm mandril Especially longlife industry version For use in with drill machine For removing of underbody coating For surface preparation Flat steel wire 340.0040 00.0 75.0 6.0 5 0 340.004 00.0 00.0.5 8 340.0042 00.0 5.0.5 40 340.0043 00.0.0 24.5 22 50 Stainless steel and brushed steel 0,5 mm Braided design With 22,2 mm bore reception Longlife industry version For use in one hand angle grinder For removing of rubber, grate and lacquer residue For surface preparation Flat and grate free steel wire STEERING WHEEL AND FITTING Universal steering wheel puller 3 arm For steering wheels with three or four spokes Tie rings with rubber sleeve for protection on the steering wheel 340.0038 5000 2.0 75.0 6.0 5.0 43.0 00 Steel wire circular brush 0,5 mm Braided design With 2 mm mandril Especially longlife industry version For use in with drill machine For removing of underbody coating For surface preparation Flat steel wire 340.0044 00.0 75.0 6.0 5 0 340.0045 00.0 00.0.5 8 340.0046 00.0 5.0.5 40 340.0047 00.0.0 24.5 22 50 Cone design steel wire circular brush 0,5 mm Braided design With thread arbor Especially longlife industry version For use in one hand angle grinder For hard to reach places For surface preparation Flat steel wire 670.0 60 4 7 M4x,5 x 30.0 Universal steering wheel puller 2 arm for passenger cars Suitable for quick, clean and damage-free removal of the steering wheel With short and long hooks as well as pressure piece for spindle Suitable for universal use due to longitudinal grooves in the puller bridge Extremely robust spindle with inductively hardened thread mm 340.003 5000 2.0 75.0 6.0 5.0 43.0 00 340.0048 00 M 4 x 2,0 2.0 00.0.0 8 0 340.004 5000 M 4 x 2,0 2.0 5.0 24.0 670.0 0 35 2,5 M4x,5 x 30 7 5 3,5 7,5 00 82

Steering wheel distance sleeve remover for VAG Steering column shroud screwdriver for TX screws Special airbag bit socket for TX screws with bore hole 2 For removing the distance sleeve on the steering spindle when changing ignition switch Shearing action increases the pressing power when removing Clamp holds hooks firmly together Prevents slippage Extremely robust spindle with inductively hardened thread Application range: Audi, Volkswagen, Seat, Škoda, etc. Suitable for assembly and disassembly of steering column shroud piece handle Optimal power transmission With suspension hole Hardened blade Chrome finish with burnished tips Blade made of chrome vanadium Application range: Audi A4 (8E), A6 (4F) Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws TX with bore hole Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Application range: BMW, etc. 3 4 5 6 7 6.540 80 0 5 M8 x,5 x 30 3 2 26 24.70.66 T8 350,0 0.0 00.0 80 8 Steering wheel distance sleeve puller for Volkswagen AIRBAG 40.04 TB 85.0 30 Suitable for quick, clean and damage-free removal of the adapter sleeve on the steering arm External drive hexagonal socket 7.0 mm Extremely robust spindle with inductively hardened thread Application range: Volkswagen Golf 2, Golf 3, Golf 4, Jetta, Passat > 88 Special airbag bit socket for hexagon screws Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws Hexagon socket Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Special airbag bit socket for TX screws Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws TX Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium 0 2 Application range: Audi, etc. Application range: Audi A4 > 04, etc. 3 450.0303 80.0 7 4 Steering wheel distance sleeve mandrel Suitable in order to strike the adapter sleeve damage-free on the steering column Brass 5 6 450.0304 50.0 30,0 7 7 Pull hook set for instrument cluster Ideal for removing the instrument cluster Without this tool it is impossible to remove the instrument cluster without damage Specially curved piece handle With suspension hole Application range: Mercedes W6, W, W24, W26, W2, W40, W, W2, W3, W8, W, W, W2, W2, W0, Volkswagen Crafter 40.03 5 85.0 30 Special airbag bit socket for TX screws Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws TX Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Application range: BMW, etc. 40.07 T27 85.0 30 Special airbag bit socket for TX screws with bore hole Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws TX with bore hole Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Application range: Audi A4 > 04, etc. 8 2 22 24 40.80 2 pcs Pull hook set for instrument cluster 2 X 40.8 2 Pull hook for headrests, 72 mm 56 40.05 T 85.0 30 40.08 TB27 85.0 30 26 83 i

Special airbag bit socket for TX screws Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws TX Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Application range: Audi, Opel, Renault, Volkswagen, etc. 40.02 T30 85.0 30 40.0 /4 Airbag bit socket TB 30 30 40.02 /4 Airbag bit socket TX 30 30 40.03 /4 Airbag bit socket hexagonal 5 mm 30 40.04 /4 Airbag bit socket TB 30 40.05 /4 Airbag bit socket TX 30 Special airbag unlocking tool Suitable for disassembling the airbag unit Optimal access to the airbag unit For manual operation piece handle Application range: Audi, Seat, Škoda, BMW, Mercedes, Volkswagen, etc. Special airbag unlocking tool Suitable for disassembling the airbag unit Optimal access to the airbag unit For manual operation With suspension hole Application range: Volkswagen, Golf 4, Bora, Passat, etc. 40.5 Special airbag unlocking tool 30 Special airbag removal lever Suitable for disassembling the airbag unit Optimal access to the airbag unit For manual operation Application range: Volkswagen Special airbag bit socket for TX screws with bore hole Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws TX with bore hole Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Application range: Audi, BMW, Mercedes, Opel, etc. 40.0 TB30 85.0 30 40.7 Special airbag unlocking tool 30 Special airbag key Suitable for disassembling the airbag unit Optimal access to the airbag unit For manual operation Contains 2 pieces as standard piece handle Application range: Audi A4, A6, Volkswagen Passat, Polo, Lupo, etc. 40.6 5,5 + 8,0 05,0 + 6,0 50 Airbag dismantling tool set For the dismantling and assembly of airbag units Sockets are the ideal length Optimal access to the reinforcement screws of the airbag pad Universal usage In durable plastic case Application range: Audi, BMW, Mercedes Benz, Opel, Volkswagen, Renault, Seat, Skoda, etc. Special airbag bit socket set Suitable for the assembly and disassembly of the airbag unit Optimal access to the airbag unit screws Internal hexagon, TX with and without tamperproof borehole Range for the assembly and disassembly of the airbag unit Internal square drive to DIN 3/ISO 74 with ball reception Bit socket in custom lengths With press fitted nickel plated insert bit For manual operation Matt finish Chrome vanadium Application range: Audi, BMW, Mercedes, Opel, Volkswagen, etc. 40.3 Special airbag key 00 Special airbag key Suitable for disassembling the airbag unit Optimal access to the airbag unit For manual operation Contains 2 pieces as standard piece handle Application range: Seat, Škoda Fabia, Octavia, Volkswagen Golf 4, New Beetle, etc. 40.00 5 pcs Special airbag bit socket set 0 40. Special airbag key 70 40.0 2 pcs Airbag dismantling tool set.60 84

Mercedes steering wheel lock spring clamp Ignition key mounting sleeve 2 40.0 /4 Airbag bit socket, TB 30 30 40.02 /4 Airbag bit socket, T30 30 40.03 /4 Airbag bit socket, hex 5mm 30 40.04 /4 Airbag bit socket, TB 30 40.05 /4 Airbag bit socket, T 30 40. Airbag tools Golf 4, Skoda Fabia, 2pcs 70 40.3 Airbag tools VW Polo, Audi A4, 2pcs 00 Suitable for disassembling the protective sleeve with ignition starter switch from the steering wheel lock Locating bolts in the steering lock part must be pressed in with the spring clamps Contains 2 pieces as standard Application range: Mercedes W2, W40, W and W2 with FBS2 ignition lock Suitable for the quick release of the ignition lock rosette With suspension hole Aluminium Application range: Mercedes W2, W40, W3, W8, W, W, W2, W2, W0, W06 with FBS2 and FBS3 ignition lock systems, Volkswagen Crafter 3 4 40.5 Airbag tools Golf 4, Passat, Bora 30 40.6 Airbag tools VW, 05x6mm 5,5+8,0mm 50 40.7 Uni Airbag unlocking tool 30 5 LOCKING CYLINDER 6 Door lock screwdriver 7 Spline (XZN ) Suitable for the assembly and disassembly of the door lock screws Also suitable for the external door handle piece handle Blade made of chrome vanadium Application range: Audi TT, Volkswagen Golf 4, Passat B5, Lupo, New Beetle, Bora, Seat, Škoda, etc. 500.30 50.0 05.0 0 Mercedes rear lock disassembly needle tool 500.32 80.0 55 Ignition key mounting sleeve Suitable for the quick release of the ignition lock rosette With rubber mat in the interior 8 0 Suitable for the quick removal of the locking cylinder on the rear lock Contains 2 pieces as standard Application range: Mercedes W3 rear lock Application range: Mercedes W2, W until 7 2 3.7 M4.0.0 50 4 VAG ignition lock disassembly needle tool Suitable for disassembling the ignition lock For unlocking the interior locking bolt Blade made of chrome vanadium Application range: Audi A3, Volkswagen Golf 4, Passat >7, Seat, etc. 500.3 0.0 0 Mercedes ignition lock disassembly needle tool set Ideal for fast disassembly of the ignition Easy removal Application range: Mercedes W6, W, W24, W26, W 500.33 0.0 50 5 6 7 Locking cylinder assembly sleeve Suitable for the quick and exact repair of the door lock For inside track closure with internal spring Application range: Seat, Škoda, Volkswagen Passat, Vento, Beetle, Lupo, Golf 4 (not Cabrio), etc. 8.8,4 0.0.0 60 2 22 500.35 4 pcs Mercedes ignition lock disassembly needle tool set 24 Mercedes ignition removal needle tool Ø 500.383. mm, 2 pcs. Mercedes ignition removal needle tool Ø 2.0 500.384 mm, 2 pcs. 500.34 65.0 00 26 85 i

RADIO AND NAVIGATION SYSTEM Radio and navigation device unlocking tool Panasonic Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Panasonic Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Blaupunkt, Grundig, Volkswagen, Audi, Ford Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Volkswagen 500.366 00.0 6 Radio and navigation device unlocking tool Kenwood Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Kenwood > 8 500.37 6.0 22 Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains pieces as standard Application range: for BMW 500.375 6.0 6 Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains pieces as standard Application range: for BMW and Opel 500.372 85.0 500.367 0.0 4 Radio and navigation device unlocking tool Panasonic Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Panasonic Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 4 pieces as standard Application range: for Audi, Volkswagen, Becker, Mercedes 500.376 52.0 2 Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Becker > 02 500.368 05.0 5 Radio and navigation system unlocking tool Pioneer and JVC Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Pioneer and JVC 500.373 78.0 5 Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Becker, Porsche, Mercedes 500.377 8.0 Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Škoda > 02 500.36 5.0 6 500.374 68.0 6 500.378 65.0 7 86

Radio installation and removal set Mercedes ignition removal needle tool Ø 2.0 mm Radio and navigation device unlocking tool Kenwood 2 Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 4 pieces as standard Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard 3 Application range: for Blaupunkt > 02 Application range: for Mercedes and BMW Application range: for Kenwood III > 02 4 5 6 500.37 7.0 24 Radio and navigation device unlocking tool Opel 500.384 65.0 500.388.0 7 7 Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Opel double ball hexagon socket Radio and navigation device unlocking tool Clarion Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Clarion new Radio and navigation device unlocking tool Sony Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Sony II > 02 8 0 2 500.38 0.0 5 Radio and navigation system unlocking tool Mercedes and BMW Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Mercedes and BMW 500.385 5.0 Radio and navigation device unlocking tool Kenwood Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Kenwood 500.38 7.0 7 Radio and navigation device unlocking tool Kenwood Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Kenwood II 8-0 3 4 5 6 7 8 500.382 65.0 2 500.386 0.0 500.36.0 7 Radio and navigation system unlocking tool Mercedes and BMW Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Mercedes and BMW Radio and navigation device unlocking tool Clarion Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Clarion old Radio and navigation device unlocking tool Sony Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Sony I > 05 2 22 24 500.383 80.0 500.387 5.0 28 500.37 5.0 7 26 87 i

Radio and navigation device unlocking tool Sony Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Sony I > 0 Radio and navigation system installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices For loosening the locking devices Extensive range for various unlocking systems In durable plastic storage case Application range: Porsche, Mercedes, Fiat, Volkswagen, Audi, Ford, BMW, Opel, Clarion, Kenwood, Panasonic, Pioneer, JVC, Sony, Becker, Blaupunkt, Grundig, etc. CLIP, RIVET AND EXTRACTION TOOLS Plastic rivet pliers set included rivets Suitable for plastic rivets Narrow head pliers Can be used in hard to access areas 0 angled rivet head With rubber grip Includes 40 plastic rivets Die-cast metal body Plastic rivets: 5.0x5.8-5.0x7.2-6.3x.2-6.6x7.2 mm 500.38 54.0 4 Radio and navigation device unlocking tool Fiat Ideal for the assembly and disassembly of car radios and navigation devices Professionally and without damage Saves time Contains 2 pieces as standard Application range: for Fiat Brava 50.650 4 pcs Plastic rivet pliers set included rivets 760 500.3 74.0 0 Radio installation and removal set Ideal for the assembly and disassembly of car radios and navigation devices For loosening the locking devices Range for various unlocking systems In plastic storage pouch 500.370 8 pcs Radio installation and removal set 60 500.37 Radio install+removal set, 2pcs, FORD 22 500.372 Radio install+removal set, pcs, BMW 500.373 Radio install+removal set, 4pcs,Mercedes 5 500.374 Radio install+removal set, 2pcs, Porsche 6 500.375 Radio install+removal set, 2pcs, VW 6 500.376 Radio install+removal set, pcs,bmw/opel 2 500.377 Radio install+removal set, 2pcs, Becker 500.378 Radio install+removal set, 2pcs, Skoda 7 500.37 Radio install+removal set,2pcs,blaupunkt 24 500.380 52 pcs Radio and navigation system installation and removal set 500.366 Radio unlocking tool Panasonic, 2 pcs. 6 500.367 Radio unlocking tool Kenwood, 2 pcs. 4 500.368 Radio unlocking tool Panasonic, 2 pcs. 5 500.36 Radio unlocking tool Pioneer, JVC, 2 pcs 6.4 500.37 Radio install+removal set, 2pcs, FORD 22 500.372 Radio install+removal set, pcs, BMW 500.373 Radio install+removal set, 4pcs,Mercedes 5 500.374 Radio install+removal set, 2pcs, Porsche 6 500.375 Radio install+removal set, 2pcs, VW 6 500.376 Radio install+removal set, pcs,bmw/opel 2 500.377 Radio install+removal set, 2pcs, Becker 500.378 Radio install+removal set, 2pcs, Skoda 7 500.37 Radio install+removal set,2pcs,blaupunkt 24 500.38 Radio unlocking tool Opel, 2 pcs. 5 Radio unlocking tool, Mercedes, BMW, 500.382 2 pcs. 2 Mercedes ignition removal needle tool Ø 500.383. mm, 2 pcs. Mercedes ignition removal needle tool Ø 2.0 500.384 mm, 2 pcs. 500.385 Radio unlocking tool Clarion, 2 pcs. 500.386 Radio unlocking tool Kenwood, 2 pcs. 500.387 Radio unlocking tool Clarion, 2 pcs. 28 500.388 Radio unlocking tool Kenwood, 2 pcs. 7 500.38 Radio unlocking tool Sony, 2 pcs. 7 500.36 Radio unlocking tool Kenwood, 2 pcs. 7 500.37 Radio unlocking tool Sony, 2 pcs. 7 500.38 Radio unlocking tool Sony, 2 pcs. 4 500.3 Radio unlocking tool Fiat, 2 pcs. 0 50.65 Plastic rivet pliers 580 50.652 Replacement rivets Pack of 0, 7,2 x 6,6 mm 50.653 Replacement rivets Pack of 0,,2 x 6,3 mm 22 50.654 Replacement rivets Pack of 0, 7,2 x 5 mm 5 50.655 Replacement rivets Pack of 0, 5,8 x 5 mm 6 Rivet removal pliers set Suited to the dismantling of plastic rivets Self-opening Including angled and straight set up Plastic 5.06 2 pcs Rivet removal pliers set 40 5.07 Rivet pliers, red, angled, 00mm 5.08 Rivet pliers, blue, straight, 00mm 88

Trim clip pliers set Clip removal set 2 Suited to the dismantling of plastic rivets and plastic clips With various profiles 35 + 80 angled tips Self-opening Chrome vanadium For metal and plastic clips Durable tool for the removal of door panels Lever effect due to the angled head on the front end of the lifter Rugged design with durable shaft With suspension hole 5 angled 40.22 Clip remover angled form 45 40.2224 Clip remover straight form 45 Standard clip remover With wedge shaped end With lifting and wedge function Ideal for loosening panels without damage to the paintwork Special plastic 3 4 5 6 5.086 2 pcs Trim clip pliers set 380.8.0.0 80 7 5.087 Trim clip pliers,35 offset, 0mm 80 5.088 Trim clip pliers, 80 offset, 0mm 0 Clip remover 40.70 6 pcs Clip removal set.00 Double clip remover With wedge shaped end Very robust execution With 2 different lever angles at 75 and 30 Special plastic 8 For metal and plastic clips Durable tool for the removal of door panels Lever effect due to the angled head on the front end of the lifter Robust execution with durable square shaft With hanging hole 40.20 275.0 2,0 60 Clip release short, length 245 mm, opening 40.7 4 mm Clip release short, length 245 mm, opening 40.72 8 mm Clip release short, length 245 mm, opening 40.73 0 mm Clip release long, length 50 mm, opening 40.74 4 mm Clip release long, length 50 mm, opening 40.75 8 mm Clip release long, length 50 mm, opening 40.76 0 mm Clip remover For removing and installing clips With varying length ends Very flat and robust execution Painted surface Metal 65 65 65 50 50 50.8 0.0 30.0 70 Clip remover with pulling eye With wedge shaped end Pulling eye for removal With 0 angled side Ideal for loosening panels without damage to the paintwork Special plastic 0 2 3 4 5 Clip remover, short For metal and plastic clips Durable tool for the removal of door panels Lever effect due to the angled head on the front end of the lifter Rugged design with durable shaft With suspension hole 5 angled.824 80.0 30.0 70 Plastic lever wedge set Ideal for loosening miscellaneous cover parts Practical assortment of different wedge and clip removal tools Slim and robust design Ideal for avoiding paint damage and damage-free release of interior trims, panels, etc. For delicate work on fragile cover parts Special plastic 6 7 8 40.7 245.0 4,0 65 40.72 245.0 8,0 65 40.73 245.0 0,0 65 Clip remover, long 40.224 0.0 00.0 50.0 70 Clip removal set 2 For metal and plastic clips Durable tool for the removal of door panels Lever effect due to the angled head on the front end of the lifter Rugged design with durable shaft With suspension hole 5 angled Special tool for the careful removal of metal and plastic clips and Rubber plugs Straight and angled form With rubber handle Metal 22 24 40.74 50.0 4,0 50 40.75 50.0 8,0 50 40.76 50.0 0,0 50 40.22 2 pcs Clip removal set 0.8 5 pcs Plastic lever wedge set 300 26 8 i

.82 Bumper trim removal wedge, 60 mm 80.822 Tim removal wedge, 80 mm 40.8 Double clip wedge, with wedge shaped end, 0 mm 70.824 Clip lever, with wedge shaped end, 80 mm 70.8 Standard clip wedge, with wedge shaped end, mm 80 Clip remover V-form Universal usage For removing cover panels trims and protective caps, etc With cutting edge blade Bevelled ground cutting edge blade With hanging hole Stainless steel Clip remover Y-form, double width angled Universal usage For removing cover panels trims and protective caps, etc Bevelled ground blades With hanging hole Stainless steel Dual clip remover, offset Flat shaped back Durable design With straight- and sharp chisel end Ideal for loosening panels without damage to the paintwork With hanging hole Special plastic.806 0.0 30.0 40.82 5.0 8.0 0.0 5.0 2.5.85 8.0.0 0.0 5.0 2.5 50 Dual clip remover, straight profiled Flat shaped back Durable design due to straight profile Blunt chisel end Ideal for loosening panels without damage to the paintwork With hanging hole Special plastic Clip remover U-form, wide offset Universal usage For removing cover panels trims and protective caps, etc Bevelled ground blades With hanging hole Stainless steel Clip remover and cutting set Universal use due to different blades For removing cover panels trims and protective caps, etc Bevelled ground blades With hanging hole Stainless steel.807 0.0 30.0 40.83 8.0.0 260.0.0 2.5 Clip remover U-form, narrow angled Universal usage For removing cover panels trims and protective caps, etc Beveled ground blades With hanging hole Stainless steel Clip remover U-form, wide angled Universal usage For removing cover panels trims and protective caps, etc Bevelled ground blades With hanging hole Stainless steel.80 5 pcs Clip remover and cutting set 2.00.8 6.0 3.0 0.0 5.0 2.5.84 6.0.0 0.0 5.0 2.5 50 Clip remover U-form, narrow angled, 0.8 mm.82 Clip remover V form, 0 mm.83 Clip release U-form, wide offset, 0 mm.84 Clip release U-form, wide angled, 0 mm 50 Clip release Y-form, double width angled,.85 0 mm 50 0