GMOS-06 INSTALLATION INSTRUCTIONS

Similar documents
GMOS-05 Installation Instructions

GMOS-11 Installation Instructions

GM ONSTAR LAN DATA BUS INTERFACE GMOS-LAN-01. Installation Instructions

GM ONSTAR CLASS II DATA BUS INTERFACE GMOS-04. Installation Instructions SEE APPLICATIONS LIST INSIDE TOOLS REQUIRED FOR INSTALLATION

GM ONSTAR LAN DATA BUS INTERFACE GMOS-LAN-02 INSTALLATION INSTRUCTIONS

GM ONSTAR CLASS II DATA BUS INTERFACE GMOS-04. Installation Instructions SEE APPLICATIONS LIST INSIDE TOOLS REQUIRED FOR INSTALLATION

GMOS-04 GM amplified OnStar Class II Data Bus Interface 2000-up

Retains OnStar/OE Bluetooth Adjustable volume for chimes and OnStar Retains satellite radio Retains balance and fade Micro B USB updatable

GMOS-LAN-02 GM LAN 29 Amplified OnStar Interface 2006-up

AFSI-02 SYNC INTERFACE INSTALLATION INSTRUCTIONS FORD SYNC INTERFACE * READ IMPORTANT WARNING ON PAGE 1 BEFORE ATTEMPTING ANY INSTALLATION

CHTO-02 Chrysler/Dodge Amplified Data Interface

GMOS-LAN-034 GM LAN-11 OnStar interface

GMOS-LAN-012. GM LAN-29 Data Interface 2006-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

INSTALLATION INSTRUCTIONS FOR PART INSTGMOS-LAN-03. GMOS-LAN-03 GM LAN 11 Non-amplified OnStar APPLICATIONS. See inside front cover KIT FEATURES

Chevy Sonic 2012-up G

GM Class-2 data interface

Interface 2000-up. GMOS-04 GM amplified OnStar Class II Data Bus

Ford RSE/SYNC/THX retention interface 2007-up

INSTALLATION INSTRUCTIONS FOR PART FRST FRST. *Read Important Warning On Page 1 Before Attempting Any Installation*

AX-ADGM01. GM Data Interface 2006-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

NISSAN BLUETOOTH/INFORMATION DISPLAY RETENTION INTERFACE NIRD-01. Installation Instructions. Applications. Nissan Maxima/Nissan Sentra

AFSI-01 SYNC INTERFACE INSTALLATION INSTRUCTIONS FORD SYNC INTERFACE * READ IMPORTANT WARNING ON PAGE 1 BEFORE ATTEMPTING ANY INSTALLATION

Jeep Cherokee Latitude/Limited 2014-up

AX-ADVW01. Volkswagen Data Interface

Nissan Maxima (with Technology Package) Nissan Maxima (with NAV) 2009 KIT FEATURES. ISO DIN radio provision with pocket...

Chevy Equinox / GMC Terrain 2013-up (with color display) G

Cadillac B

AX-GMLAN44-SWC. GM Data Interface with SWC

Honda Accord 2013-up B

AX-LR904. Land Rover LR2 (with NAV, with M.O.S.T. 25 amplifier) Data Interface with SWC & Factory Display Retention

Mazda RX

AX-CH5-SWC. Chrysler Data Interface with SWC 2013-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

B. Ford Focus (with 4.2 screen) 2015-up* *Visit MetraOnline.com for up-to-date vehicle specific applications.

AX-LR903. Land Rover Range Rover Evoque (with M.O.S.T. 25 amplifier) Data Interface with SWC & Factory Display Retention

AX-JP901. Jeep Renegade Data Interface with SWC & Factory Display Retention 2015

INSTALLATION INSTRUCTIONS FOR PART

AX-VL Volvo XC90 Data Interface with SWC * * For models with rear parking sensors

TOOLS REQUIRED Wire cutter Crimp tool Solder gun Tape Connectors (example: butt-connectors, bell caps, etc.) Small flat-blade screwdriver

AX-LR902. Land Rover Range Rover Evoque Data Interface with SWC & Factory Display Retention 2014* * For models with rear parking sensors

HG. Chrysler Pacifica 2017-up* *Visit MetraOnline.com for up-to-date vehicle specific applications.

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS See Inside For A Complete List Of Applications TOOLS REQUIRED:

B. Ford Fusion 2013-up* *Visit metraonline.com for up-to-date vehicle specific applications.

AX-HYKIA2-SWC. Hyundai Data Interface with SWC

Ram 1500/2500/ up (with 8 touchscreen) B

AX-MAZ1-SWC. Mazda Data Interface with SWC

B. TABLE OF CONTENTS Dash Disassembly...2 Kit Preparation...3 Kit Assembly...4 Axxess Interface Installation...5 Final Assembly...

INSTALLATION INSTRUCTIONS FOR PART OESWC-6502-RF

AX-CH013-SWC. Chrysler Data Interface with SWC 2004-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

CH. Ford Edge (with 4.2 screen)

CH. Ford Explorer (with 4.2 screen)

AX-VW901. Volkswagen Data Interface with SWC & Factory Display Retention

Toyota Avalon 2013-up HG

B. TABLE OF CONTENTS Dash Disassembly...2 Kit Preparation...3 Kit Assembly...4 Axxess Interface Installation...5 Final Assembly...

Acura TSX 2009-up CH

B. Ford F-150 (with 4.2 screen)

Toyota RAV up

Ford F up CH

Ford Flex (without NAV) TABLE OF CONTENTS Dash Disassembly Kit Preparation...4 Kit Assembly KIT FEATURES

2011 Hyundai Sonata

AX-BM9112. BMW Mini (R53) (with Harmon Kardon amplifier)

INSTALLATION INSTRUCTIONS FOR PART OESWC-LAN29-RF OESWC-LAN29-RF

INSTALLATION INSTRUCTIONS FOR PART OESWC-6502-STK OESWC-6502-STK INTERFACE COMPONENTS

16-pin harness with stripped leads Female 3.5mm connector with stripped leads

Toyota 4-Runner (Excluding Limited) Toyota Highlander

Nissan 370Z 2009-up (without navigation) B

APPLICATIONS Nissan Cube 2009-up

Chevrolet Camaro Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS VW Touareg/Touareg

AX-GMLAN29-SWC. GM Data Interface with SWC 2006-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications.

BUICK Lacrosse KIT FEATURES

Mazda CX up B U.S. PATENT # D639,293

Ford Mustang 2015-up CH. Table of Contents. METRA The World s best kits. metraonline.com. (with 4.2 screen)

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Chevrolet Corvette D A B

APPLICATIONS Nissan Cube

Lincoln Navigator / MKX Lincoln MKZ / Zephyr 2006 (excludes models equipped with factory navigation)

B. Land Rover LR Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications

TOYOTA 4 RUNNER 2010-UP

2007-up Cadillac Escalade

B/ HG

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS HONDA

Nissan Sentra (without pocket door)

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS ACURA MDX

B. Land Rover Range Rover

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Mercedes C-Class Mercedes CLK 2004 TOOLS REQUIRED:

Polaris Slingshot 2015-up* *Visit MetraOnline.com for up-to-date vehicle specific applications.

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS Mitsubishi Eclipse

B. TABLE OF CONTENTS Dash Disassembly Kit Preparation...4 Kit Assembly...5 Axxess Interface Installation...6 Final Assembly...

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS Subaru Legacy/Outback For Manual Climate Controls Only (Excluding Outback Sport)

Hyundai Sonata GLS/SE (without NAV) 2011, Sonata (without NAV) , Sonata Hybrid (without NAV)

INSTALLATION INSTRUCTIONS FOR PART TB APPLICATIONS. Mitsubishi Outlander 2007-up TOOLS REQUIRED:

Honda Ridgeline

Honda Accord 2008-up (Excluding dual zone automatic climate controls) / T APPLICATIONS

Hyundai Elantra / Sonata / Tiburon (all but SE) Kia Optima (2006 Early Production Models Only)

Toyota Tacoma

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Nissan Maxima 2009

B. Ford Fusion 2013-up

Honda Civic

Mercedes Benz SLK Class

Honda Accord (Equipped with Single Zone Climate Controls)

Toyota Sequoia / Tundra

Transcription:

CADILLAC ONSTAR CLASS II DATA BUS INTERFACE GMOS-06 INSTALLATION INSTRUCTIONS * READ IMPORTANT WARNING ON PAGE 1 BEFORE ATTEMPTING ANY INSTALLATION The GMOS-06 is designed to be used in Cadillacs equipped with Onstar and amplified system. It will retain the warning chimes that are lost when the factory radio is removed. The GMOS-06 also provides a 12-volt switched accessory output along with Mute, Parking Brake, Speed Sense (VSS), and Reverse outputs for the installation of an aftermarket navigation radio. APPLICATIONS Cadillac Deville 1999-2005 Cadillac Eldorado 1999-2002 Cadillac Seville 1999-2004 Cadillac Catera 1997-2001* * NOTE: Navigation outputs not available for these vehicles. INTERFACE COMPONENTS GMOS-06 14 pin harness with RCA s 16 pin harness to 32 pin Cadillac harness 1-800-221-0932 www.axxessinterface.com Copyright 2004-2009 Metra Electronics Corporation

GMOS06 * IMPORTANT WARNING THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION WHICH MUST BE CAREFULLY FOLLOWED. THE INSTRUCTIONS ARE WORDED IN SUCH A MANNER TO ASSUME THAT THE INSTALLER IS CAPABLE OF COMPLETING THESE TYPE OF ELECTRONIC INSTALLATIONS. IF YOU ARE UNCLEAR AS TO WHAT YOU ARE INSTRUCTED TO DO OR BELIEVE THAT YOU DO NOT UNDERSTAND THE INSTRUCTIONS SO AS TO PROPERLY AND SAFELY COMPLETE THE INSTALLATION YOU SHOULD CONSULT A TECHNICIAN WHO DOES HAVE THIS KNOWLEDGE AND UNDERSTANDING. FAILURE TO FOLLOW THESE INSTRUCTIONS CAREFULLY AND TO INSTALL THE INTERFACE AS DESCRIBED COULD CAUSE HARM TO THE VEHICLE OR TO SAFETY SYSTEMS ON THE VEHICLE. INTERFERENCE WITH CERTAIN SAFETY SYSTEMS COULD CAUSE HARM TO PERSONS AS WELL. IF YOU HAVE ANY QUESTIONS IN THIS REGARD PLEASE CALL THE HELP LINE OR THE METRA AT 1-800-221-0932 FOR ASSISTANCE. 1

TOOLS REQUIRED FOR INSTALLATION Cutting Tool Tape Crimping Tool Connectors (ie: butt-connectors, bell caps, etc.) HARNESS PREPARATION * Important: Before beginning any of the following, disconnect the negative battery terminal to prevent accidental short circuit. **Note: The ignition power source of the Cadillac keeps the radio on until one of the doors is opened. This is called the R.A.P. (retained accessory power). The GMOS-06 is designed to retain this feature. Connections to be made on the 14 pin harness: 1) Connect the white RCA to the radio s left front RCA output. 2) Connect the gray RCA to the radio s right front RCA output. 3) Connect the green RCA to the radio s left rear RCA output. 4) Connect the violet RCA to the radio s right rear RCA output. Note: If no RCA outputs are available, use the Metra line output converter part # LOC-648 (sold separately). 5) Connect the blue/white wire to the radio s amplifier turn-on output. 6) Connect the red wire to the radio s 12-volt accessory or switched wire. The following wires on the 14-pin harness are for the aftermarket radios equipped with navigation features: 1) Connect the Brown wire to the mute wire of the aftermarket radio. 2) Connect the Green wire to the parking brake wire of the aftermarket radio. 3) Connect the Blue/Pink wire to the VSS or speed sense wire of the aftermarket radio. 4) Connect the Green/Purple wire to the reverse wire of the aftermarket radio. When completed, plug the 14-pin harness into the GMOS-06. 2

GMOS06 Connections to be made on the 16 pin harness: 1) Connect the yellow wire to the radio s 12-volt battery or memory wire. Connections to be made on the 32-pin harness: 1) Connect the blue wire to the radio s antenna turn-on wire. If no antenna turnon wire is present, hook blue wire to the radio s amplifier turn-on wire. 2) Connect the orange/white wire to the radio s dimmer wire. If no dimmer wire is present, just tape off wire. 3) Connect the black wire to the radio s ground wire. 4) The black/white wires are to be grounded only if engine noise is present, otherwise insulate the unused wires. When completed, plug the 16-pin harness into the GMOS-06. INSTALLING THE GMOS-06 1) With all connections completed to the aftermarket radio, plug the 32 pin harness into the Cadillac s wiring harness. *Note: some minor modifications may be necessary to the sub dash cavity to accommodate the GMOS-06. 2) Cycle the key by turning the ignition on then back off, then on again to test the radio. TESTING THE GMOS-06 1) Turn the ignition on, then turn the radio on to verify that the radio works. Check the balance control of the radio for proper operation. 2) Push the Onstar button, if so equipped, to verify Onstar is working properly. The radio will turn off or mute if the radio has this feature and Onstar will be heard through the front speakers. Turn off Onstar and the radio will turn back on or deactivate mute if equipped. 3

ONSTAR LEVEL ADJUSTMENT To adjust the Onstar volume level find the Black/Yellow wire on the 16-pin harness. Push the blue Onstar button, while the voice is speaking tap the Black/Yellow wire to ground. There are 4 volume settings for Onstar; once the 4th setting is reached and the Black/Yellow wire is tapped to ground it will automatically go back to the first volume setting. Once the volume is set it will stay at that volume until the Black/Yellow wire is tapped to ground again. This can be set during installation and then left alone. If user adjustment is desired, a momentary contact switch (sold separately) can be added. Connect one terminal from the switch to ground and the other terminal to the Black/Yellow wire. The volume will change one level every time the switch is pressed. AUDIO LEVEL ADJUSTMENT When using the GMOS-06 with a radio that has a high pre-out voltage the audio signal may become distorted. To resolve this follow these steps: 1. Locate the potentiometer next to the 14-pin connector located on the GMOS-06. 2. Taking a small flat headed screwdriver, turn the potentiometer counter-clockwise to lower the input level going to the factory amplifier. Note: The chime volume will also adjust with the audio input. 4

GMOS06 KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Rev. 06-08-09 INSTGMOS-06 1-800-221-0932 www.axxessinterface.com Copyright 2004-2009 Metra Electronics Corporation