GC-X series LP Gas Forklift Trucks 2,000kg / 2,00kg / 3,000kg / 3,00kg Designed for high-intensity indoor applications Compact design offers excellent manoeuvrability and delivers high productivity Intellix ehicle Management System and CANbus technology monitor truck systems Techtronix transmission delivers precise handling AccuTouchTM minilevers or manual levers
Truck Dimensions Wa 4.3 b10 3.6 b1 4.21 e 4.22 b11 3.7 b1 4.21 a 2 mm mm a 2 Ast 4.34.1/4.34.2 a 4.1 b h4 4. h3 4.4 h1 4.2 h6 4.7 h7 4.8 h2 4.3 s 4.22 h10 4.12 m1 4.31 l 4.22 x 1.8 m2 4.32 y 1.9 l2 4.20 l1 4.19 2 GC-X series
GLC 20X, GLC 2X Mast details and capacity ratings (kg) - Cushion tyres Model Tyre size, front Overall width, front GLC 20 X 21 x 8-1 1070mm GLC 2 X 21 x 8-1 1070mm Mast h 1 h 2 +s h 3 +s h 4 Tilt (Back) Without sideshift 00 600 ISS & FP 00 600 Without sideshift 00 600 ISS & FP 00 600 2 Stage LFL 213 298 140 140 3290 4830 41 60 1920 1900 1800 1910 1820 1720 200 2410 230 220 200 2400 2260 2160 2 Stage FFL 213 17 3 42 10 1810 200 230 200 220 3 Stage FFL 213 238 28 19 184 204 490 0 6000 6170 6770 7220 1900 1800 1710 1780 1670 180 10 1770 1680 1700 1600 110 2390 2270 2180* 2220 2 2010 2370 2240 2140 2130 2020 1930 * Indicates wide tread is required. GLC 30X, GLC 3X Mast details and capacity ratings (kg) - Cushion tyres Model Tyre size, front Overall width, front GLC 30 X 21 x 8-1 1070mm GLC 3 X 21 x 8-1 1070mm Mast h 1 h 2 +s h 3 +s h 4 Tilt (Back) Without sideshift 00 600 ISS & FP 00 600 Without sideshift 00 600 ISS & FP 00 600 2 Stage LFL 218 10 320 443 0 0 2820 2810 2990 2970 2680 3360 3310 3280 3270 3310 3270 3140 3120 2 Stage FFL 223 190 3310 43 0 2810 2 2690 3360 3280 3310 3140 3 Stage FFL 223 228 273 160 16 210 476 491 96 99 614 719 20 2860 2110* 2680 260 2110* 2840 2810 2160* 260 230 2160* 3380 330* 1870* 3140 3110* 1870* 3330 3* 1910* 0 2* 1910* * Indicates wide tread is required. Options l Premium monitoring package l Powertrain protection system l High air intake with pre-cleaner l Radiator screen l Traction speed limiter l Load weight indicator l accumulator l Return-to-set tilt l Impact monitor l Reverse alarm l Amber strobe light l Operator password l Keyless start l Full-suspension swivel seat l Foot directional control l Mirrors l Light kit l Swing-out, drop-down EZ-Tank bracket Engine Specifications, - alue Engine Cylinders 4 Displacement Power Torque Masts PSI 231cc 44.0kW @ 2,700rpm 164Nm @ 2,000rpm Kubota 2.L, - Productivity Engine Cylinders 4 Displacement Power Torque Kubota 2491cc 43.9kW @ 2,00rpm 178Nm @ 1,000rpm A full range of Hi-is TM 2 stage LFL and 2 and 3 stage FFL masts are available. Hi-is TM masts are designed for maximum visibility, with widely spaced channels, lift chains and main lift cylinders. 3
DI 2198 General Specifications, LP Gas Powered GLC20X, GLC2X, GLC30X, GLC3X Distinguishing mark Weights Tyres/chassis Dimensions Performance data Combustion-engine Addition data 1.1 1.2 1.3 1.4 1. 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3. 3.6 3.7 4.1 4.2 4.3 4.4 4. 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32 Manufacturer (abbreviation) Manufacturer s type designation Engine/Transmission Model Brake Type Drive: electric (battery or mains), diesel, petrol, fuel gas Operator type: hand, pedestrian, standing, seated, orderpicker Rated capacity / rated load Load centre distance Load distance, centre of drive axle to fork Wheelbase Service weight Axle loading, laden front / rear Axle loading, unladen front / rear Tyres: P = pneumatic, = cushion, SE = superelastic Tyre size, front Tyre size, rear Number of wheels, front/rear (x = driven wheels) Tread, front Tread, rear Tilt of mast/fork carrige, forward / backward β Height, mast lowered Free lift t Lift t Height, mast extended : Height of overhead guard (cabin) m Seat height relating to SIP/stand height 8 Coupling height Overall length Length to face of forks Overall width q Fork dimensions ISO 2331 Fork carriage ISO 2328, class/type A, B Fork carriage width w Ground clearance, laden, below mast Ground clearance, centre of wheelbase 4.34.1 Aisle width with pallets 0mm x 1200mm crossways 4.34.2 Aisle width with pallets 800mm wide x 1200mm lengthways 4.3 4.36 4.41 4.42 4.43.1.2.3..7.10 7.1 7.2 7.3 7.4 7. 8.1 10.1 10.2 10.3 10.4 10.7 Turning radius Internal turning radius 90 intersecting aisle (with pallet W = 1200mm, L = 0mm) Step height (from ground to running board) Step height (between intermediate steps between running board and floor) Travel speed laden/unladen Lift speed, laden/unladen Lowering speed, laden/unladen Drawbar pull, laden/unladen * Gradeability, laden/unladen ** Service brake Engine manufacturer/type Engine power according to ISO18 Rated speed Number of cylinders/displacement Fuel consumtion according to DI cycle Type of drive unit Operating pressure for attachments Oil volume for attachments oil tank, capacity Fuel tank, capacity Sound pressure level at the driver s seat H 10.7.1 Sound power level during the workcycle v 10.7.2 Guaranteed sound power /14/EC 10.8 Towing coupling, type DIN q Standard/Wide. t Bottom of forks. 8 Full suspension seat specified. : Without load backrest. w Add 31mm with load backrest. m h6 subject to +/- mm tolerance. ariable. * at 1.6km/h. Q (t) c x y kg kg kg b 10 b 11 a / b ( o ) h 1 h 2 h 3 h 4 h 6 h 7 h 110 l 1 l 2 b 1 /b 2 s/e/l b 3 m 1 m 2 A st A st W a b 13 km/h m/sec m/sec N kw rpm (-)/cm3 l/h or kg/h bar l/min l l db(a) db(a) db(a) GLC 20X, Techtronix, 1-Speed alue 2.0 00 390 3 4682 / 688 1618 / 1937 21 x 8-1 16 x 6-10. / 213 320 384 3226 2226 1070 / 1242 40 x x 0 II A 12 340 3740 190 86 1839 30 29 17.6 / 18.2 0.61 / 0.63 0.8 / 0.0 19820 / 780 26.3 / 24.4 44.0 4 / 231 2.6 0-1 40. 77 96 101 ** at 4.8km/h. H LPAZ, measured according to the test cycles and based on the weighting values contained in EN1203. GLC 20X Kubota 2.L, Techtronix, 1-Speed Productivity 2.0 00 390 3 4682 / 688 1618 / 1937 21 x 8-1 16 x 6-10. / 213 320 384 3226 2226 1070 / 1242 40 x x 0 II A 12 340 3740 190 86 1839 30 29 17.8 / 18.0 0. / 0.64 0.8 / 0.0 18010 / 9600 2.4 / 24.4 Kubota 2.L 43.9 200 4 / 2491 2.7 0-1 66 40. 78 97 102 GLC 2X Techtronix, 1-Speed alue 2. 00 390 3910 371 / 807 142 / 2369 v LWAZ, measured according to the test cycles and based on the weighting values contained in EN1203 21 x 8-1 16 x 6-10. / 213 320 384 3280 2280 1070 / 1242 40 x x 0 II A 12 390 3790 86 1863 30 29 17.6 / 18.2 0.61 / 0.63 0.8 / 0.0 19660 / 7440 22. / 20.8 44.0 4 / 231 2.8 0-1 40. 77 96 101 4 GC-X series
GLC 2X GLC 30X GLC 30X GLC 3X GLC 3X 1.1 1.2 Kubota 2.L Techtronix, 1-Speed Productivity 2. 00 390 3910 371 / 807 142 / 2369 21 x 8-1 16 x 6-10. / 213 320 384 3280 2280 1070 / 1242 40 x x 0 II A 12 390 3790 86 1863 30 29 17.8 / 18.0 0. / 0.64 0.8 / 0.0 1780 / 8800 21.7 / 20.8 Kubota 2.L 43.9 200 4 / 2491 3.0 0-1 66 40. 78 97 102 Techtronix, 1-Speed alue 3.0 00 402 44 13 / 971 19 / 2868 Spec sheet based on :- 3290mm (GLC 20-2X) / 320mm (GLC 30-3X) tof 2 stage LFL mast with standard carriage, 0mm forks with e-hydraulics. 21 x 8-1 16 x 6-10. / 218 31 380 336 236 1108 / 1242 0 x 12 x 0 III A 12 3668 3868 2066 86 1 30 29 17.0 / 18.0 0.3 / 0. 0.3 / 0.47 1940 / 8 18.7 / 19.3 44.0 4 / 231 3.0 0-1 40. 77 96 101 Kubota 2.L Techtronix, 1-Speed Productivity 3.0 00 402 44 13 / 971 19 / 2868 21 x 8-1 16 x 6-10. / 218 31 380 336 236 1108 / 1242 0 x 12 x 0 III A 12 3668 3868 2066 86 1 30 29 17.8 / 18.0 0. / 0.6 0.3 / 0.47 1760 / 8400 18.1 / 19. Kubota 2.L 43.9 200 4 / 2491 3.2 0-1 40. 78 97 102 Techtronix, 1-Speed alue 3. 00 402 4810 60 / 109 101 / 3309 21 x 9-1 16 x 6-10. / 218 31 380 3406 2406 118 / 1242 0 x 12 x 0 III A 12 3721 3921 2119 86 199 30 29 17.0 / 18.0 0.3 / 0. 0.3 / 0.47 192200 / 7600 16.6 / 16.6 44.0 4 / 231 3.2 0-1 40. 77 96 101 Kubota 2.L Techtronix, 1-Speed Productivity 3. 00 402 4810 60 / 109 101 / 3309 21 X 9-1 16 X 6-10. / 218 31 380 3406 2406 118 / 1242 0 x 12 x 0 III A 12 3721 3921 2119 86 199 30 29 17.2 / 16.9 0. / 0.6 0.3 / 0.47 17490 / 7600 16.1 / 16.6 Kubota 2.L 43.9 200 4 / 2491 3.4 0-1 66 40. 78 97 102 1.3 1.4 1. 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3. 3.6 3.7 4.1 4.2 4.3 4.4 4. 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32 4.34.1 4.34.2 4.3 4.36 4.41 4.42 4.43.1.2.3..7.10 7.1 7.2 7.3 7.4 7. 8.1 10.1 10.2 10.3 10.4 10.7 10.7.1 10.7.2 10.8 Addition data Combustion-engine Performance data Dimensions Tyres/chassis Weights Distinguishing mark
GC-X series Models: GLC 20X, GLC 2X, GLC 30X, GLC 3X eracitor GC-X Series This series of trucks is available in two configurations to match your material handling application requirements. The alue model provides excellent performance for standard and mediumduty applications and is optimized for lowest hourly cost of operation. The Productivity model delivers maximum performance for medium to heavy-duty applications with state-ofthe art features and industry leading power. Engines The new engine is designed with fuel economy and low cost of ownership in mind. With cast iron cylinder block and cylinder head manufactured from aluminium it has main bearings. The high performance Kubota 2.L engine maximises performance and productivity for intensive operations, and with Cast Iron head and special 9. Litre Oil capacity is designed to do so reliably for the life of the truck. Advanced engine controls allow fuel mapping to be optimised to allow highly efficient operation in ECO-eLo mode, with minimum loss of performance. All stainless steel exhaust system and intake valve seat inserts are used to provide long valve and seat life with fuel. Transmission The Techtronix transmission features electronic inching which requires no adjustment, electric shift control, neutral start switch, and an anti-restart protection. A single pedal controls both inching and braking. A mesh suction and a 10 micron return line filtration protect the transmission from abrasive contaminants. The Auto Deceleration System (ADS) slows the truck down through the controlled application of clutch packs, without the need to apply the foot brake. Controlled Power Reversal (CPR) reduces tyre spin by precisely regulating engine speed during full power reversal situations and Controlled Roll-Back (CRB) limits roll-back on gradients to 7mm per second. Cooling System The cooling system employs a 43cm blade pusher- type fan. A permanently lubricated water pump and a high capacity, cross-flow radiator ensure rapid heat dissipation. The sealed cooling system operates at 1 psi, the coolant recovery tank allows visual inspection of coolant level. The combicooler radiator features an externally mounted transmission oil cooler for increased heat transfer capability. All radiators are soft mounted for durability. Drive Axle The drive axle is designed to withstand heavy-duty loads and absorb shock loads. The wheel hubs rotate on large tapered roller bearings and the drive shaft transmits torsion to the drive axle from the engine and transmission. Transmission torque occurs through an industrial hypoid ring gear and pinion differential assembly. The drive axle is a self-contained assembly that is isolated from the transmission by a heavy-duty rubber isolator. The axle shafts feature a rolled fillet root spline design for increased resistance to torsion stress. A magnetic sump plug is used to collect any metal particles that are circulating in the axle oil, preventing component wear. Brakes Brakes are duo-servo hydraulic, self-energizing, automatic adjusting drum brake assemblies. Asbestos-free brake linings are bonded to steel shoes and act against a cast iron drum. The single circuit master cylinder has a 6 GC-X series
sealed fluid reservoir and features a fluid level sensor which activates an indicator light located on the instrument panel. An independent, hand adjustable parking brake with push-button locking has an audible alarm to indicate when the operator has left the truck without applying the parking brake. Power Steering Hydrostatic steering provides responsive control and eliminates mechanical linkages for reduced surface shock and simplified maintenance. The steering wheel is 30cm in diameter with a textured surface grip and spinner knob, and requires only four turns lock-to-lock. The centre mounted steer cylinder is located within the confines of the steer axle for protection. Steer Axle The steer axle is constructed of cast steel and is rubber shock mounted to the frame for reduced wear and vibration. The CSE (Continuous Stability Enhancement) system enhances lateral truck stability through reduced steer axle articulation, while simultaneously allowing uncompromised uneven surface travel. Operator Compartment The frame has been designed by state-of-the-art finite element methods and contains a rugged, unitized structure with a low step height this combined with a conveniently placed hand grip provides easy entry and exit to and from the truck. The ergonomically designed overhead guard is bar type and offers excellent visibility and reduced noise. Cowl mounted hydraulic control levers positioned on the right side of the steering column are standard. All trucks are available with a mini-lever armrest, which features a new contoured design, and in addition to the hydraulic functions - features a horn and direction switch, ensuring that all key truck functions are within constant, easy reach. The Full Suspension Seat, together with the isolated powertrain, provide best in class Whole-Body ibration levels of 0.6m/s2, ensuring that the operator remains comfortable throughout the shift and fatigue, aches and pains are kept to a minimum. The automotive-style pedal arrangement with a large, single inch/ brake pedal is standard. Tilt cylinders are located beneath the floor for uncluttered space and a rubber floor mat reduces noise and vibration. The floor plate can be removed without tools for excellent, fast service access. Intellix ehicle System Management (SM) The SM acts as a master truck controller, providing extensive monitoring and control of truck functions and systems. CANbus technology reduces wiring complexity and enables comprehensive communications between truck systems. The ergonomically positioned dash display transmits continual feedback to the operator and allows for the communication of service codes and comprehensive on-board diagnostics enable quick and easy troubleshooting. The electrical system features sealed connectors and Hall Effect sensors for superior dependability. System The hydraulic system incorporates a gear type pump, cast iron body for quiet efficiency. The system is protected from overloads by a main relief valve for the lift circuit and a secondary relief valve for tilt and auxiliary functions. Oil is double filtered through a mesh suction line strainer and 10 micron return line filter. The hydraulic tank is integrated into the frame. For electro-hydraulic controls, an emergency lowering valve is provided to allow the load to be lowered in the event of power loss. O-ring face seal fittings are used in all high pressure hydraulic connections. Masts Hi-is Masts are available in 2 Stage LFL, 2 Stage FFL and 3 Stage FFL configurations. Masts feature a flush-faced design with geometrically matched, angled load roller bearings which are canted, yet provide full-face roller contact. The mast front rail flange angle coupled with the inverted J inner channel and three degree mast rollers significantly reduce channel and roller wear. The J-hook mast mounting system allows for convenient mast installation and removal. A non-metallic phenolic mast pivot bushing with woven reinforcement offers high load carrying capability with outstanding durability. 7
GC-X series Models: GLC 20X, GLC 2X, GLC 30X, GLC 3X HYSTER-YALE UK LIMITED trading as Europe Materials Handling Centennial House, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom. Tel: +44 (0) 1276 3800 Fax: +44 (0) 1276 3 www.yale-forklifts.eu Publication part no. 220990366 Rev.01 Printed in The Netherlands (0216HG) EN. Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice., ERACITOR and are registered trademarks. PEOPLE, PRODUCTS, PRODUCTIITY, PREMIER, Hi-is, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. Europe Materials Handling 2016. All rights reserved. Truck shown with optional equipment. Country of Registration: England and Wales. Company Registration Number: 0263677